/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * French * * LCD Menu Messages * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language * */ #ifndef LANGUAGE_FR_H #define LANGUAGE_FR_H #define MAPPER_NON // Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h //#define SIMULATE_ROMFONT #define DISPLAY_CHARSET_ISO10646_1 #define WELCOME_MSG MACHINE_NAME " prete." #define MSG_SD_INSERTED "Carte inseree" #define MSG_SD_REMOVED "Carte retiree" #define MSG_MAIN "Menu principal" #define MSG_AUTOSTART "Demarrage auto" #define MSG_DISABLE_STEPPERS "Arreter moteurs" #define MSG_AUTO_HOME "Origine auto." #define MSG_LEVEL_BED_HOMING "Origine XYZ" #define MSG_LEVEL_BED_WAITING "Cliquer pour commencer" #define MSG_LEVEL_BED_DONE "Mise a niveau OK!" #define MSG_LEVEL_BED_CANCEL "Annuler" #define MSG_SET_HOME_OFFSETS "Regler decal. origine" #define MSG_HOME_OFFSETS_APPLIED "Decalages appliques" #define MSG_SET_ORIGIN "Regler origine" #define MSG_PREHEAT_1 "Prechauffage PLA" #define MSG_PREHEAT_1_N "Prechauff. PLA " #define MSG_PREHEAT_1_ALL "Prech. PLA Tout" #define MSG_PREHEAT_1_BEDONLY "Prech. PLA Plateau" #define MSG_PREHEAT_1_SETTINGS "Regl. prech. PLA" #define MSG_PREHEAT_2 "Prechauffage ABS" #define MSG_PREHEAT_2_N "Prechauff. ABS " #define MSG_PREHEAT_2_ALL "Prech. ABS Tout" #define MSG_PREHEAT_2_BEDONLY "Prech. ABS Plateau" #define MSG_PREHEAT_2_SETTINGS "Regl. prech. ABS" #define MSG_COOLDOWN "Refroidir" #define MSG_SWITCH_PS_ON "Allumer alim." #define MSG_SWITCH_PS_OFF "Eteindre alim." #define MSG_EXTRUDE "Extrusion" #define MSG_RETRACT "Retraction" #define MSG_MOVE_AXIS "Deplacer un axe" #define MSG_LEVEL_BED "Regl. Niv. Plateau" #define MSG_MOVE_X "Depl. X" #define MSG_MOVE_Y "Depl. Y" #define MSG_MOVE_Z "Depl. Z" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_01MM "Depl. 0.1mm" #define MSG_MOVE_1MM "Depl. 1mm" #define MSG_MOVE_10MM "Depl. 10mm" #define MSG_SPEED " Vitesse" #define MSG_BED_Z "Plateau Z" #define MSG_NOZZLE "Buse" #define MSG_BED "Plateau" #define MSG_FAN_SPEED "Vite. ventilateur" #define MSG_FLOW "Flux" #define MSG_CONTROL "Controler" #define MSG_MIN LCD_STR_THERMOMETER " Min" #define MSG_MAX LCD_STR_THERMOMETER " Max" #define MSG_FACTOR LCD_STR_THERMOMETER " Facteur" #define MSG_AUTOTEMP "Temp. Auto." #define MSG_ON "Marche " #define MSG_OFF "Arret" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_ACC "Accel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax" #define MSG_X "X" #define MSG_Y "Y" #define MSG_Z "Z" #define MSG_E "E" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "Vdepl min" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-retract" #define MSG_A_TRAVEL "A-Depl." #define MSG_XSTEPS "Xpas/mm" #define MSG_YSTEPS "Ypas/mm" #define MSG_ZSTEPS "Zpas/mm" #define MSG_ESTEPS "Epas/mm" #define MSG_TEMPERATURE "Temperature" #define MSG_MOTION "Mouvement" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E en mm3" #define MSG_FILAMENT_DIAM "Diam. Fil." #define MSG_CONTRAST "Contraste LCD" #define MSG_STORE_EPROM "Sauver config" #define MSG_LOAD_EPROM "Lire config" #define MSG_RESTORE_FAILSAFE "Restaurer defauts" #define MSG_REFRESH "Actualiser" #define MSG_WATCH "Surveiller" #define MSG_PREPARE "Preparer" #define MSG_TUNE "Regler" #define MSG_PAUSE_PRINT "Interrompre impr." #define MSG_RESUME_PRINT "Reprendre impr." #define MSG_STOP_PRINT "Arreter impr." #define MSG_CARD_MENU "Impr. depuis SD" #define MSG_NO_CARD "Pas de carte" #define MSG_DWELL "Repos..." #define MSG_USERWAIT "Atten. de l'util." #define MSG_RESUMING "Repri. de l'impr." #define MSG_PRINT_ABORTED "Impr. Annulee" #define MSG_NO_MOVE "Aucun mouvement." #define MSG_KILLED "MORT." #define MSG_STOPPED "STOPPE." #define MSG_CONTROL_RETRACT "Retraction mm" #define MSG_CONTROL_RETRACT_SWAP "Ech. Retr. mm" #define MSG_CONTROL_RETRACTF "Retraction V" #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ech. UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" #define MSG_AUTORETRACT "Retract. Auto." #define MSG_FILAMENTCHANGE "Changer filament" #define MSG_INIT_SDCARD "Init. la carte SD" #define MSG_CNG_SDCARD "Changer de carte" #define MSG_ZPROBE_OUT "Z sonde exte. lit" #define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST "first" #define MSG_ZPROBE_ZOFFSET "Decalage Z" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Butee abandon" #define MSG_HEATING_FAILED_LCD "Erreur de chauffe" #define MSG_ERR_REDUNDANT_TEMP "Err: ERREUR TEMP. REDONDANTE" #define MSG_THERMAL_RUNAWAY "EMBALLEMENT THERMIQUE" #define MSG_ERR_MAXTEMP "Err: TEMP. MAX" #define MSG_ERR_MINTEMP "Err: TEMP. MIN" #define MSG_ERR_MAXTEMP_BED "Err: TEMP. MAX PLATEAU" #define MSG_ERR_MINTEMP_BED "Err: TEMP. MIN PLATEAU" #define MSG_END_HOUR "heures" #define MSG_END_MINUTE "minutes" #define MSG_HEATING "En chauffe..." #define MSG_HEATING_COMPLETE "Chauffe terminee" #define MSG_BED_HEATING "Plateau en chauffe..." #define MSG_BED_DONE "Chauffe plateau terminee" #define MSG_DELTA_CALIBRATE "Calibration Delta" #define MSG_DELTA_CALIBRATE_X "Calibrer X" #define MSG_DELTA_CALIBRATE_Y "Calibrer Y" #define MSG_DELTA_CALIBRATE_Z "Calibrer Z" #define MSG_DELTA_CALIBRATE_CENTER "Calibrer centre" #endif // LANGUAGE_FR_H