/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #ifndef ULTRALCD_H #define ULTRALCD_H #include "MarlinConfig.h" #if ENABLED(ULTRA_LCD) || ENABLED(MALYAN_LCD) void lcd_init(); bool lcd_detected(); void lcd_update(); void lcd_setalertstatusPGM(const char* message); #else inline void lcd_init() {} inline bool lcd_detected() { return true; } inline void lcd_update() {} inline void lcd_setalertstatusPGM(const char* message) { UNUSED(message); } #endif #if ENABLED(ULTRA_LCD) #include "Marlin.h" int16_t lcd_strlen(const char* s); int16_t lcd_strlen_P(const char* s); bool lcd_hasstatus(); void lcd_setstatus(const char* message, const bool persist=false); void lcd_setstatusPGM(const char* message, const int8_t level=0); void lcd_setalertstatusPGM(const char* message); void lcd_reset_alert_level(); void lcd_reset_status(); void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...); void lcd_kill_screen(); void kill_screen(const char* lcd_msg); extern uint8_t lcdDrawUpdate; inline void lcd_refresh() { lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; } #if HAS_BUZZER void lcd_buzz(const long duration, const uint16_t freq); #endif void lcd_quick_feedback(const bool clear_buttons); // Audible feedback for a button click - could also be visual #if ENABLED(LCD_PROGRESS_BAR) && PROGRESS_MSG_EXPIRE > 0 void dontExpireStatus(); #endif #if ENABLED(LCD_SET_PROGRESS_MANUALLY) extern uint8_t progress_bar_percent; #endif #if ENABLED(ADC_KEYPAD) uint8_t get_ADC_keyValue(); #endif #if ENABLED(DOGLCD) extern int16_t lcd_contrast; void set_lcd_contrast(const int16_t value); #endif #if ENABLED(SHOW_BOOTSCREEN) void lcd_bootscreen(); #endif #define LCD_UPDATE_INTERVAL 100 #define BUTTON_EXISTS(BN) (defined(BTN_## BN) && BTN_## BN >= 0) #define BUTTON_PRESSED(BN) !READ(BTN_## BN) #if ENABLED(ULTIPANEL) // LCD with a click-wheel input extern bool defer_return_to_status; // Function pointer to menu functions. typedef void (*screenFunc_t)(); typedef void (*menuAction_t)(); extern int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) extern bool lcd_external_control; #else constexpr bool lcd_external_control = false; #endif #if ENABLED(LCD_BED_LEVELING) extern bool lcd_wait_for_move; #else constexpr bool lcd_wait_for_move = false; #endif void lcd_goto_screen(screenFunc_t screen, const uint32_t encoder=0); void lcd_completion_feedback(const bool good=true); #if ENABLED(ADVANCED_PAUSE_FEATURE) extern uint8_t active_extruder; void lcd_advanced_pause_show_message(const AdvancedPauseMessage message, const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT, const uint8_t extruder=active_extruder); #endif #if ENABLED(G26_MESH_VALIDATION) void lcd_chirp(); #endif #if ENABLED(AUTO_BED_LEVELING_UBL) void lcd_mesh_edit_setup(const float &initial); float lcd_mesh_edit(); void lcd_z_offset_edit_setup(const float &initial); float lcd_z_offset_edit(); #endif #endif #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT) extern millis_t previous_lcd_status_ms; #endif bool lcd_blink(); #if ENABLED(REPRAPWORLD_KEYPAD) // is also ULTIPANEL and NEWPANEL #define REPRAPWORLD_BTN_OFFSET 0 // bit offset into buttons for shift register values #define BLEN_REPRAPWORLD_KEYPAD_F3 0 #define BLEN_REPRAPWORLD_KEYPAD_F2 1 #define BLEN_REPRAPWORLD_KEYPAD_F1 2 #define BLEN_REPRAPWORLD_KEYPAD_DOWN 3 #define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4 #define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5 #define BLEN_REPRAPWORLD_KEYPAD_UP 6 #define BLEN_REPRAPWORLD_KEYPAD_LEFT 7 #define EN_REPRAPWORLD_KEYPAD_F3 (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_F3)) #define EN_REPRAPWORLD_KEYPAD_F2 (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_F2)) #define EN_REPRAPWORLD_KEYPAD_F1 (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_F1)) #define EN_REPRAPWORLD_KEYPAD_DOWN (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_DOWN)) #define EN_REPRAPWORLD_KEYPAD_RIGHT (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_RIGHT)) #define EN_REPRAPWORLD_KEYPAD_MIDDLE (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_MIDDLE)) #define EN_REPRAPWORLD_KEYPAD_UP (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_UP)) #define EN_REPRAPWORLD_KEYPAD_LEFT (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_LEFT)) #define REPRAPWORLD_KEYPAD_MOVE_Z_DOWN (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_F3) #define REPRAPWORLD_KEYPAD_MOVE_Z_UP (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_F2) #define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_DOWN) #define REPRAPWORLD_KEYPAD_MOVE_X_RIGHT (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_RIGHT) #define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_UP) #define REPRAPWORLD_KEYPAD_MOVE_X_LEFT (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_LEFT) #if ENABLED(ADC_KEYPAD) #define KEYPAD_HOME EN_REPRAPWORLD_KEYPAD_F1 #define KEYPAD_EN_C EN_REPRAPWORLD_KEYPAD_MIDDLE #else #define KEYPAD_HOME EN_REPRAPWORLD_KEYPAD_MIDDLE #define KEYPAD_EN_C EN_REPRAPWORLD_KEYPAD_F1 #endif #define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons_reprapworld_keypad & KEYPAD_HOME) #define REPRAPWORLD_KEYPAD_MOVE_MENU (buttons_reprapworld_keypad & KEYPAD_EN_C) #if BUTTON_EXISTS(ENC) #define LCD_CLICKED ((buttons & EN_C) || REPRAPWORLD_KEYPAD_MOVE_MENU) #else #define LCD_CLICKED REPRAPWORLD_KEYPAD_MOVE_MENU #endif #define REPRAPWORLD_KEYPAD_PRESSED (buttons_reprapworld_keypad & ( \ EN_REPRAPWORLD_KEYPAD_F3 | \ EN_REPRAPWORLD_KEYPAD_F2 | \ EN_REPRAPWORLD_KEYPAD_F1 | \ EN_REPRAPWORLD_KEYPAD_DOWN | \ EN_REPRAPWORLD_KEYPAD_RIGHT | \ EN_REPRAPWORLD_KEYPAD_MIDDLE | \ EN_REPRAPWORLD_KEYPAD_UP | \ EN_REPRAPWORLD_KEYPAD_LEFT) \ ) #elif defined(EN_C) #define LCD_CLICKED (buttons & EN_C) #else #define LCD_CLICKED false #endif #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) bool is_lcd_clicked(); void wait_for_release(); #endif #else // MALYAN_LCD or no LCD constexpr bool lcd_wait_for_move = false; inline void lcd_refresh() {} inline bool lcd_hasstatus() { return false; } inline void lcd_setstatus(const char* const message, const bool persist=false) { UNUSED(message); UNUSED(persist); } inline void lcd_setstatusPGM(const char* const message, const int8_t level=0) { UNUSED(message); UNUSED(level); } inline void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...) { UNUSED(level); UNUSED(fmt); } inline void lcd_reset_alert_level() {} inline void lcd_reset_status() {} #endif // ULTRA_LCD #if ENABLED(ULTIPANEL) #if ENABLED(NEWPANEL) // Uses digital switches, not a shift register // Wheel spin pins where BA is 00, 10, 11, 01 (1 bit always changes) #define BLEN_A 0 #define BLEN_B 1 #define EN_A _BV(BLEN_A) #define EN_B _BV(BLEN_B) #if BUTTON_EXISTS(ENC) #define BLEN_C 2 #define EN_C _BV(BLEN_C) #endif #if BUTTON_EXISTS(BACK) #define BLEN_D 3 #define EN_D _BV(BLEN_D) #define LCD_BACK_CLICKED (buttons & EN_D) #endif #endif // NEWPANEL extern volatile uint8_t buttons; // The last-checked buttons in a bit array. void lcd_buttons_update(); #else inline void lcd_buttons_update() {} #endif #define LCD_MESSAGEPGM(x) lcd_setstatusPGM(PSTR(x)) #define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatusPGM(PSTR(x)) #if ENABLED(SD_REPRINT_LAST_SELECTED_FILE) void lcd_reselect_last_file(); #endif #if ENABLED(ULTIPANEL) && ENABLED(SDSUPPORT) extern bool abort_sd_printing; #else constexpr bool abort_sd_printing = false; #endif #endif // ULTRALCD_H