#include "temperature.h" #include "ultralcd.h" #ifdef ULTRA_LCD #include "Marlin.h" #include "language.h" #include "cardreader.h" #include "temperature.h" #include "stepper.h" #include "ConfigurationStore.h" int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */ /* Configuration settings */ int plaPreheatHotendTemp; int plaPreheatHPBTemp; int plaPreheatFanSpeed; int absPreheatHotendTemp; int absPreheatHPBTemp; int absPreheatFanSpeed; #ifdef FILAMENT_LCD_DISPLAY unsigned long message_millis=0; #endif #ifdef ULTIPANEL static float manual_feedrate[] = MANUAL_FEEDRATE; #endif // ULTIPANEL /* !Configuration settings */ //Function pointer to menu functions. typedef void (*menuFunc_t)(); uint8_t lcd_status_message_level; char lcd_status_message[LCD_WIDTH+1] = WELCOME_MSG; #ifdef DOGLCD #include "dogm_lcd_implementation.h" #else #include "ultralcd_implementation_hitachi_HD44780.h" #endif /** forward declarations **/ void copy_and_scalePID_i(); void copy_and_scalePID_d(); /* Different menus */ static void lcd_status_screen(); #ifdef ULTIPANEL extern bool powersupply; static void lcd_main_menu(); static void lcd_tune_menu(); static void lcd_prepare_menu(); static void lcd_move_menu(); static void lcd_control_menu(); static void lcd_control_temperature_menu(); static void lcd_control_temperature_preheat_pla_settings_menu(); static void lcd_control_temperature_preheat_abs_settings_menu(); static void lcd_control_motion_menu(); #ifdef DOGLCD static void lcd_set_contrast(); #endif static void lcd_control_retract_menu(); static void lcd_sdcard_menu(); static void lcd_quick_feedback();//Cause an LCD refresh, and give the user visual or audible feedback that something has happened /* Different types of actions that can be used in menu items. */ static void menu_action_back(menuFunc_t data); static void menu_action_submenu(menuFunc_t data); static void menu_action_gcode(const char* pgcode); static void menu_action_function(menuFunc_t data); static void menu_action_sdfile(const char* filename, char* longFilename); static void menu_action_sddirectory(const char* filename, char* longFilename); static void menu_action_setting_edit_bool(const char* pstr, bool* ptr); static void menu_action_setting_edit_int3(const char* pstr, int* ptr, int minValue, int maxValue); static void menu_action_setting_edit_float3(const char* pstr, float* ptr, float minValue, float maxValue); static void menu_action_setting_edit_float32(const char* pstr, float* ptr, float minValue, float maxValue); static void menu_action_setting_edit_float5(const char* pstr, float* ptr, float minValue, float maxValue); static void menu_action_setting_edit_float51(const char* pstr, float* ptr, float minValue, float maxValue); static void menu_action_setting_edit_float52(const char* pstr, float* ptr, float minValue, float maxValue); static void menu_action_setting_edit_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue); static void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_int3(const char* pstr, int* ptr, int minValue, int maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_float3(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_float32(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_float5(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_float51(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_float52(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue, menuFunc_t callbackFunc); #define ENCODER_FEEDRATE_DEADZONE 10 #if !defined(LCD_I2C_VIKI) #ifndef ENCODER_STEPS_PER_MENU_ITEM #define ENCODER_STEPS_PER_MENU_ITEM 5 #endif #ifndef ENCODER_PULSES_PER_STEP #define ENCODER_PULSES_PER_STEP 1 #endif #else #ifndef ENCODER_STEPS_PER_MENU_ITEM #define ENCODER_STEPS_PER_MENU_ITEM 2 // VIKI LCD rotary encoder uses a different number of steps per rotation #endif #ifndef ENCODER_PULSES_PER_STEP #define ENCODER_PULSES_PER_STEP 1 #endif #endif /* Helper macros for menus */ #define START_MENU() do { \ if (encoderPosition > 0x8000) encoderPosition = 0; \ if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM < currentMenuViewOffset) currentMenuViewOffset = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM;\ uint8_t _lineNr = currentMenuViewOffset, _menuItemNr; \ bool wasClicked = LCD_CLICKED;\ for(uint8_t _drawLineNr = 0; _drawLineNr < LCD_HEIGHT; _drawLineNr++, _lineNr++) { \ _menuItemNr = 0; #define MENU_ITEM(type, label, args...) do { \ if (_menuItemNr == _lineNr) { \ if (lcdDrawUpdate) { \ const char* _label_pstr = PSTR(label); \ if ((encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \ lcd_implementation_drawmenu_ ## type ## _selected (_drawLineNr, _label_pstr , ## args ); \ }else{\ lcd_implementation_drawmenu_ ## type (_drawLineNr, _label_pstr , ## args ); \ }\ }\ if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) {\ lcd_quick_feedback(); \ menu_action_ ## type ( args ); \ return;\ }\ }\ _menuItemNr++;\ } while(0) #define MENU_ITEM_DUMMY() do { _menuItemNr++; } while(0) #define MENU_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args ) #define MENU_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args ) #define END_MENU() \ if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM >= _menuItemNr) encoderPosition = _menuItemNr * ENCODER_STEPS_PER_MENU_ITEM - 1; \ if ((uint8_t)(encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) >= currentMenuViewOffset + LCD_HEIGHT) { currentMenuViewOffset = (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) - LCD_HEIGHT + 1; lcdDrawUpdate = 1; _lineNr = currentMenuViewOffset - 1; _drawLineNr = -1; } \ } } while(0) /** Used variables to keep track of the menu */ #ifndef REPRAPWORLD_KEYPAD volatile uint8_t buttons;//Contains the bits of the currently pressed buttons. #else volatile uint8_t buttons_reprapworld_keypad; // to store the reprapworld_keypad shift register values #endif #ifdef LCD_HAS_SLOW_BUTTONS volatile uint8_t slow_buttons;//Contains the bits of the currently pressed buttons. #endif uint8_t currentMenuViewOffset; /* scroll offset in the current menu */ uint32_t blocking_enc; uint8_t lastEncoderBits; uint32_t encoderPosition; #if (SDCARDDETECT > 0) bool lcd_oldcardstatus; #endif #endif//ULTIPANEL menuFunc_t currentMenu = lcd_status_screen; /* function pointer to the currently active menu */ uint32_t lcd_next_update_millis; uint8_t lcd_status_update_delay; bool ignore_click = false; bool wait_for_unclick; uint8_t lcdDrawUpdate = 2; /* Set to none-zero when the LCD needs to draw, decreased after every draw. Set to 2 in LCD routines so the LCD gets at least 1 full redraw (first redraw is partial) */ //prevMenu and prevEncoderPosition are used to store the previous menu location when editing settings. menuFunc_t prevMenu = NULL; uint16_t prevEncoderPosition; //Variables used when editing values. const char* editLabel; void* editValue; int32_t minEditValue, maxEditValue; menuFunc_t callbackFunc; // place-holders for Ki and Kd edits float raw_Ki, raw_Kd; static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool feedback=true) { if (currentMenu != menu) { currentMenu = menu; encoderPosition = encoder; if (feedback) lcd_quick_feedback(); } } /* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */ static void lcd_status_screen() { if (lcd_status_update_delay) lcd_status_update_delay--; else lcdDrawUpdate = 1; if (lcdDrawUpdate) { lcd_implementation_status_screen(); lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */ } #ifdef ULTIPANEL bool current_click = LCD_CLICKED; if (ignore_click) { if (wait_for_unclick) { if (!current_click) { ignore_click = wait_for_unclick = false; } else { current_click = false; } } else if (current_click) { lcd_quick_feedback(); wait_for_unclick = true; current_click = false; } } if (current_click) { lcd_goto_menu(lcd_main_menu); lcd_implementation_init(); // to maybe revive the LCD if static electricity killed it. #ifdef FILAMENT_LCD_DISPLAY message_millis=millis(); //get status message to show up for a while #endif } #ifdef ULTIPANEL_FEEDMULTIPLY // Dead zone at 100% feedrate if ((feedmultiply < 100 && (feedmultiply + int(encoderPosition)) > 100) || (feedmultiply > 100 && (feedmultiply + int(encoderPosition)) < 100)) { encoderPosition = 0; feedmultiply = 100; } if (feedmultiply == 100 && int(encoderPosition) > ENCODER_FEEDRATE_DEADZONE) { feedmultiply += int(encoderPosition) - ENCODER_FEEDRATE_DEADZONE; encoderPosition = 0; } else if (feedmultiply == 100 && int(encoderPosition) < -ENCODER_FEEDRATE_DEADZONE) { feedmultiply += int(encoderPosition) + ENCODER_FEEDRATE_DEADZONE; encoderPosition = 0; } else if (feedmultiply != 100) { feedmultiply += int(encoderPosition); encoderPosition = 0; } #endif//ULTIPANEL_FEEDMULTIPLY if (feedmultiply < 10) feedmultiply = 10; else if (feedmultiply > 999) feedmultiply = 999; #endif//ULTIPANEL } #ifdef ULTIPANEL static void lcd_return_to_status() { lcd_goto_menu(lcd_status_screen, 0, false); } static void lcd_sdcard_pause() { card.pauseSDPrint(); } static void lcd_sdcard_resume() { card.startFileprint(); } static void lcd_sdcard_stop() { card.sdprinting = false; card.closefile(); quickStop(); if(SD_FINISHED_STEPPERRELEASE) { enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND)); } autotempShutdown(); cancel_heatup = true; lcd_setstatus(MSG_PRINT_ABORTED); } /* Menu implementation */ static void lcd_main_menu() { START_MENU(); MENU_ITEM(back, MSG_WATCH, lcd_status_screen); if (movesplanned() || IS_SD_PRINTING) { MENU_ITEM(submenu, MSG_TUNE, lcd_tune_menu); }else{ MENU_ITEM(submenu, MSG_PREPARE, lcd_prepare_menu); } MENU_ITEM(submenu, MSG_CONTROL, lcd_control_menu); #ifdef SDSUPPORT if (card.cardOK) { if (card.isFileOpen()) { if (card.sdprinting) MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause); else MENU_ITEM(function, MSG_RESUME_PRINT, lcd_sdcard_resume); MENU_ITEM(function, MSG_STOP_PRINT, lcd_sdcard_stop); }else{ MENU_ITEM(submenu, MSG_CARD_MENU, lcd_sdcard_menu); #if SDCARDDETECT < 1 MENU_ITEM(gcode, MSG_CNG_SDCARD, PSTR("M21")); // SD-card changed by user #endif } }else{ MENU_ITEM(submenu, MSG_NO_CARD, lcd_sdcard_menu); #if SDCARDDETECT < 1 MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually initialize the SD-card via user interface #endif } #endif END_MENU(); } #ifdef SDSUPPORT static void lcd_autostart_sd() { card.lastnr=0; card.setroot(); card.checkautostart(true); } #endif void lcd_set_home_offsets() { for(int8_t i=0; i < NUM_AXIS; i++) { if (i != E_AXIS) { add_homing[i] -= current_position[i]; current_position[i] = 0.0; } } plan_set_position(0.0, 0.0, 0.0, current_position[E_AXIS]); // Audio feedback enquecommand_P(PSTR("M300 S659 P200")); enquecommand_P(PSTR("M300 S698 P200")); lcd_return_to_status(); } #ifdef BABYSTEPPING static void _lcd_babystep(int axis, const char *msg) { if (encoderPosition != 0) { babystepsTodo[axis] += (int)encoderPosition; encoderPosition = 0; lcdDrawUpdate = 1; } if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(msg), ""); if (LCD_CLICKED) lcd_goto_menu(lcd_tune_menu); } static void lcd_babystep_x() { _lcd_babystep(X_AXIS, MSG_BABYSTEPPING_X); } static void lcd_babystep_y() { _lcd_babystep(Y_AXIS, MSG_BABYSTEPPING_Y); } static void lcd_babystep_z() { _lcd_babystep(Z_AXIS, MSG_BABYSTEPPING_Z); } #endif //BABYSTEPPING static void lcd_tune_menu() { START_MENU(); MENU_ITEM(back, MSG_MAIN, lcd_main_menu); MENU_ITEM_EDIT(int3, MSG_SPEED, &feedmultiply, 10, 999); #if TEMP_SENSOR_0 != 0 MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); #endif #if TEMP_SENSOR_1 != 0 MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15); #endif #if TEMP_SENSOR_2 != 0 MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15); #endif #if TEMP_SENSOR_BED != 0 MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15); #endif MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255); MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999); MENU_ITEM_EDIT(int3, MSG_FLOW0, &extruder_multiply[0], 10, 999); #if TEMP_SENSOR_1 != 0 MENU_ITEM_EDIT(int3, MSG_FLOW1, &extruder_multiply[1], 10, 999); #endif #if TEMP_SENSOR_2 != 0 MENU_ITEM_EDIT(int3, MSG_FLOW2, &extruder_multiply[2], 10, 999); #endif #ifdef BABYSTEPPING #ifdef BABYSTEP_XY MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x); MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y); #endif //BABYSTEP_XY MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z); #endif #ifdef FILAMENTCHANGEENABLE MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600")); #endif END_MENU(); } void lcd_preheat_pla0() { setTargetHotend0(plaPreheatHotendTemp); setTargetBed(plaPreheatHPBTemp); fanSpeed = plaPreheatFanSpeed; lcd_return_to_status(); setWatch(); // heater sanity check timer } void lcd_preheat_abs0() { setTargetHotend0(absPreheatHotendTemp); setTargetBed(absPreheatHPBTemp); fanSpeed = absPreheatFanSpeed; lcd_return_to_status(); setWatch(); // heater sanity check timer } #if TEMP_SENSOR_1 != 0 //2nd extruder preheat void lcd_preheat_pla1() { setTargetHotend1(plaPreheatHotendTemp); setTargetBed(plaPreheatHPBTemp); fanSpeed = plaPreheatFanSpeed; lcd_return_to_status(); setWatch(); // heater sanity check timer } void lcd_preheat_abs1() { setTargetHotend1(absPreheatHotendTemp); setTargetBed(absPreheatHPBTemp); fanSpeed = absPreheatFanSpeed; lcd_return_to_status(); setWatch(); // heater sanity check timer } #endif //2nd extruder preheat #if TEMP_SENSOR_2 != 0 //3 extruder preheat void lcd_preheat_pla2() { setTargetHotend2(plaPreheatHotendTemp); setTargetBed(plaPreheatHPBTemp); fanSpeed = plaPreheatFanSpeed; lcd_return_to_status(); setWatch(); // heater sanity check timer } void lcd_preheat_abs2() { setTargetHotend2(absPreheatHotendTemp); setTargetBed(absPreheatHPBTemp); fanSpeed = absPreheatFanSpeed; lcd_return_to_status(); setWatch(); // heater sanity check timer } #endif //3 extruder preheat #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //more than one extruder present void lcd_preheat_pla012() { setTargetHotend0(plaPreheatHotendTemp); setTargetHotend1(plaPreheatHotendTemp); setTargetHotend2(plaPreheatHotendTemp); setTargetBed(plaPreheatHPBTemp); fanSpeed = plaPreheatFanSpeed; lcd_return_to_status(); setWatch(); // heater sanity check timer } void lcd_preheat_abs012() { setTargetHotend0(absPreheatHotendTemp); setTargetHotend1(absPreheatHotendTemp); setTargetHotend2(absPreheatHotendTemp); setTargetBed(absPreheatHPBTemp); fanSpeed = absPreheatFanSpeed; lcd_return_to_status(); setWatch(); // heater sanity check timer } #endif //more than one extruder present void lcd_preheat_pla_bedonly() { setTargetBed(plaPreheatHPBTemp); fanSpeed = plaPreheatFanSpeed; lcd_return_to_status(); setWatch(); // heater sanity check timer } void lcd_preheat_abs_bedonly() { setTargetBed(absPreheatHPBTemp); fanSpeed = absPreheatFanSpeed; lcd_return_to_status(); setWatch(); // heater sanity check timer } static void lcd_preheat_pla_menu() { START_MENU(); MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu); MENU_ITEM(function, MSG_PREHEAT_PLA0, lcd_preheat_pla0); #if TEMP_SENSOR_1 != 0 //2 extruder preheat MENU_ITEM(function, MSG_PREHEAT_PLA1, lcd_preheat_pla1); #endif //2 extruder preheat #if TEMP_SENSOR_2 != 0 //3 extruder preheat MENU_ITEM(function, MSG_PREHEAT_PLA2, lcd_preheat_pla2); #endif //3 extruder preheat #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat MENU_ITEM(function, MSG_PREHEAT_PLA012, lcd_preheat_pla012); #endif //2 extruder preheat #if TEMP_SENSOR_BED != 0 MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly); #endif END_MENU(); } static void lcd_preheat_abs_menu() { START_MENU(); MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu); MENU_ITEM(function, MSG_PREHEAT_ABS0, lcd_preheat_abs0); #if TEMP_SENSOR_1 != 0 //2 extruder preheat MENU_ITEM(function, MSG_PREHEAT_ABS1, lcd_preheat_abs1); #endif //2 extruder preheat #if TEMP_SENSOR_2 != 0 //3 extruder preheat MENU_ITEM(function, MSG_PREHEAT_ABS2, lcd_preheat_abs2); #endif //3 extruder preheat #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat MENU_ITEM(function, MSG_PREHEAT_ABS012, lcd_preheat_abs012); #endif //2 extruder preheat #if TEMP_SENSOR_BED != 0 MENU_ITEM(function, MSG_PREHEAT_ABS_BEDONLY, lcd_preheat_abs_bedonly); #endif END_MENU(); } void lcd_cooldown() { setTargetHotend0(0); setTargetHotend1(0); setTargetHotend2(0); setTargetBed(0); fanSpeed = 0; lcd_return_to_status(); } static void lcd_prepare_menu() { START_MENU(); MENU_ITEM(back, MSG_MAIN, lcd_main_menu); #ifdef SDSUPPORT #ifdef MENU_ADDAUTOSTART MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd); #endif #endif MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84")); MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28")); MENU_ITEM(function, MSG_SET_HOME_OFFSETS, lcd_set_home_offsets); //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0")); #if TEMP_SENSOR_0 != 0 #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_BED != 0 MENU_ITEM(submenu, MSG_PREHEAT_PLA, lcd_preheat_pla_menu); MENU_ITEM(submenu, MSG_PREHEAT_ABS, lcd_preheat_abs_menu); #else MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla0); MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0); #endif #endif MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown); #if PS_ON_PIN > -1 if (powersupply) { MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81")); }else{ MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80")); } #endif MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu); END_MENU(); } float move_menu_scale; static void lcd_move_menu_axis(); static void _lcd_move(const char *name, int axis, int min, int max) { if (encoderPosition != 0) { refresh_cmd_timeout(); current_position[axis] += float((int)encoderPosition) * move_menu_scale; if (min_software_endstops && current_position[axis] < min) current_position[axis] = min; if (max_software_endstops && current_position[axis] > max) current_position[axis] = max; encoderPosition = 0; #ifdef DELTA calculate_delta(current_position); plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[axis]/60, active_extruder); #else plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[axis]/60, active_extruder); #endif lcdDrawUpdate = 1; } if (lcdDrawUpdate) lcd_implementation_drawedit(name, ftostr31(current_position[axis])); if (LCD_CLICKED) lcd_goto_menu(lcd_move_menu_axis); } static void lcd_move_x() { _lcd_move(PSTR("X"), X_AXIS, X_MIN_POS, X_MAX_POS); } static void lcd_move_y() { _lcd_move(PSTR("Y"), Y_AXIS, Y_MIN_POS, Y_MAX_POS); } static void lcd_move_z() { _lcd_move(PSTR("Z"), Z_AXIS, Z_MIN_POS, Z_MAX_POS); } static void lcd_move_e() { if (encoderPosition != 0) { current_position[E_AXIS] += float((int)encoderPosition) * move_menu_scale; encoderPosition = 0; #ifdef DELTA calculate_delta(current_position); plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[E_AXIS]/60, active_extruder); #else plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[E_AXIS]/60, active_extruder); #endif lcdDrawUpdate = 1; } if (lcdDrawUpdate) { lcd_implementation_drawedit(PSTR("Extruder"), ftostr31(current_position[E_AXIS])); } if (LCD_CLICKED) lcd_goto_menu(lcd_move_menu_axis); } static void lcd_move_menu_axis() { START_MENU(); MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu); MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x); MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y); if (move_menu_scale < 10.0) { MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z); MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e); } END_MENU(); } static void lcd_move_menu_10mm() { move_menu_scale = 10.0; lcd_move_menu_axis(); } static void lcd_move_menu_1mm() { move_menu_scale = 1.0; lcd_move_menu_axis(); } static void lcd_move_menu_01mm() { move_menu_scale = 0.1; lcd_move_menu_axis(); } static void lcd_move_menu() { START_MENU(); MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu); MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm); MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm); MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm); //TODO:X,Y,Z,E END_MENU(); } static void lcd_control_menu() { START_MENU(); MENU_ITEM(back, MSG_MAIN, lcd_main_menu); MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu); MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu); #ifdef DOGLCD // MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63); MENU_ITEM(submenu, MSG_CONTRAST, lcd_set_contrast); #endif #ifdef FWRETRACT MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu); #endif #ifdef EEPROM_SETTINGS MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); MENU_ITEM(function, MSG_LOAD_EPROM, Config_RetrieveSettings); #endif MENU_ITEM(function, MSG_RESTORE_FAILSAFE, Config_ResetDefault); END_MENU(); } static void lcd_control_temperature_menu() { #ifdef PIDTEMP // set up temp variables - undo the default scaling raw_Ki = unscalePID_i(Ki); raw_Kd = unscalePID_d(Kd); #endif START_MENU(); MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); #if TEMP_SENSOR_0 != 0 MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); #endif #if TEMP_SENSOR_1 != 0 MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15); #endif #if TEMP_SENSOR_2 != 0 MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15); #endif #if TEMP_SENSOR_BED != 0 MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15); #endif MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255); #if defined AUTOTEMP && (TEMP_SENSOR_0 != 0) MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled); MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15); MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15); MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0); #endif #ifdef PIDTEMP MENU_ITEM_EDIT(float52, MSG_PID_P, &Kp, 1, 9990); // i is typically a small value so allows values below 1 MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i); MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d); # ifdef PID_ADD_EXTRUSION_RATE MENU_ITEM_EDIT(float3, MSG_PID_C, &Kc, 1, 9990); # endif//PID_ADD_EXTRUSION_RATE #endif//PIDTEMP MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu); MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu); END_MENU(); } static void lcd_control_temperature_preheat_pla_settings_menu() { START_MENU(); MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu); MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &plaPreheatFanSpeed, 0, 255); #if TEMP_SENSOR_0 != 0 MENU_ITEM_EDIT(int3, MSG_NOZZLE, &plaPreheatHotendTemp, 0, HEATER_0_MAXTEMP - 15); #endif #if TEMP_SENSOR_BED != 0 MENU_ITEM_EDIT(int3, MSG_BED, &plaPreheatHPBTemp, 0, BED_MAXTEMP - 15); #endif #ifdef EEPROM_SETTINGS MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); #endif END_MENU(); } static void lcd_control_temperature_preheat_abs_settings_menu() { START_MENU(); MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu); MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &absPreheatFanSpeed, 0, 255); #if TEMP_SENSOR_0 != 0 MENU_ITEM_EDIT(int3, MSG_NOZZLE, &absPreheatHotendTemp, 0, HEATER_0_MAXTEMP - 15); #endif #if TEMP_SENSOR_BED != 0 MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, 0, BED_MAXTEMP - 15); #endif #ifdef EEPROM_SETTINGS MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings); #endif END_MENU(); } static void lcd_control_motion_menu() { START_MENU(); MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); #ifdef ENABLE_AUTO_BED_LEVELING MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, 0.5, 50); #endif MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 500, 99000); MENU_ITEM_EDIT(float3, MSG_VXY_JERK, &max_xy_jerk, 1, 990); MENU_ITEM_EDIT(float52, MSG_VZ_JERK, &max_z_jerk, 0.1, 990); MENU_ITEM_EDIT(float3, MSG_VE_JERK, &max_e_jerk, 1, 990); MENU_ITEM_EDIT(float3, MSG_VMAX MSG_X, &max_feedrate[X_AXIS], 1, 999); MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Y, &max_feedrate[Y_AXIS], 1, 999); MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Z, &max_feedrate[Z_AXIS], 1, 999); MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &max_feedrate[E_AXIS], 1, 999); MENU_ITEM_EDIT(float3, MSG_VMIN, &minimumfeedrate, 0, 999); MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &mintravelfeedrate, 0, 999); MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_X, &max_acceleration_units_per_sq_second[X_AXIS], 100, 99000, reset_acceleration_rates); MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Y, &max_acceleration_units_per_sq_second[Y_AXIS], 100, 99000, reset_acceleration_rates); MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &max_acceleration_units_per_sq_second[Z_AXIS], 100, 99000, reset_acceleration_rates); MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &max_acceleration_units_per_sq_second[E_AXIS], 100, 99000, reset_acceleration_rates); MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &retract_acceleration, 100, 99000); MENU_ITEM_EDIT(float52, MSG_XSTEPS, &axis_steps_per_unit[X_AXIS], 5, 9999); MENU_ITEM_EDIT(float52, MSG_YSTEPS, &axis_steps_per_unit[Y_AXIS], 5, 9999); MENU_ITEM_EDIT(float51, MSG_ZSTEPS, &axis_steps_per_unit[Z_AXIS], 5, 9999); MENU_ITEM_EDIT(float51, MSG_ESTEPS, &axis_steps_per_unit[E_AXIS], 5, 9999); #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED MENU_ITEM_EDIT(bool, MSG_ENDSTOP_ABORT, &abort_on_endstop_hit); #endif #ifdef SCARA MENU_ITEM_EDIT(float74, MSG_XSCALE, &axis_scaling[X_AXIS],0.5,2); MENU_ITEM_EDIT(float74, MSG_YSCALE, &axis_scaling[Y_AXIS],0.5,2); #endif END_MENU(); } #ifdef DOGLCD static void lcd_set_contrast() { if (encoderPosition != 0) { lcd_contrast -= encoderPosition; if (lcd_contrast < 0) lcd_contrast = 0; else if (lcd_contrast > 63) lcd_contrast = 63; encoderPosition = 0; lcdDrawUpdate = 1; u8g.setContrast(lcd_contrast); } if (lcdDrawUpdate) { lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr2(lcd_contrast)); } if (LCD_CLICKED) lcd_goto_menu(lcd_control_menu); } #endif #ifdef FWRETRACT static void lcd_control_retract_menu() { START_MENU(); MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); MENU_ITEM_EDIT(bool, MSG_AUTORETRACT, &autoretract_enabled); MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT, &retract_length, 0, 100); #if EXTRUDERS > 1 MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_SWAP, &retract_length_swap, 0, 100); #endif MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &retract_feedrate, 1, 999); MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_ZLIFT, &retract_zlift, 0, 999); MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER, &retract_recover_length, 0, 100); #if EXTRUDERS > 1 MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER_SWAP, &retract_recover_length_swap, 0, 100); #endif MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate, 1, 999); END_MENU(); } #endif //FWRETRACT #if SDCARDDETECT == -1 static void lcd_sd_refresh() { card.initsd(); currentMenuViewOffset = 0; } #endif static void lcd_sd_updir() { card.updir(); currentMenuViewOffset = 0; } void lcd_sdcard_menu() { if (lcdDrawUpdate == 0 && LCD_CLICKED == 0) return; // nothing to do (so don't thrash the SD card) uint16_t fileCnt = card.getnrfilenames(); START_MENU(); MENU_ITEM(back, MSG_MAIN, lcd_main_menu); card.getWorkDirName(); if(card.filename[0]=='/') { #if SDCARDDETECT == -1 MENU_ITEM(function, LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh); #endif }else{ MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir); } for(uint16_t i=0;i maxEditValue) \ encoderPosition = maxEditValue; \ if (lcdDrawUpdate) \ lcd_implementation_drawedit(editLabel, _strFunc(((_type)((int32_t)encoderPosition + minEditValue)) / scale)); \ if (LCD_CLICKED) \ { \ *((_type*)editValue) = ((_type)((int32_t)encoderPosition + minEditValue)) / scale; \ lcd_goto_menu(prevMenu, prevEncoderPosition); \ } \ } \ void menu_edit_callback_ ## _name () { \ menu_edit_ ## _name (); \ if (LCD_CLICKED) (*callbackFunc)(); \ } \ static void menu_action_setting_edit_ ## _name (const char* pstr, _type* ptr, _type minValue, _type maxValue) \ { \ prevMenu = currentMenu; \ prevEncoderPosition = encoderPosition; \ \ lcdDrawUpdate = 2; \ currentMenu = menu_edit_ ## _name; \ \ editLabel = pstr; \ editValue = ptr; \ minEditValue = minValue * scale; \ maxEditValue = maxValue * scale - minEditValue; \ encoderPosition = (*ptr) * scale - minEditValue; \ }\ static void menu_action_setting_edit_callback_ ## _name (const char* pstr, _type* ptr, _type minValue, _type maxValue, menuFunc_t callback) \ { \ prevMenu = currentMenu; \ prevEncoderPosition = encoderPosition; \ \ lcdDrawUpdate = 2; \ currentMenu = menu_edit_callback_ ## _name; \ \ editLabel = pstr; \ editValue = ptr; \ minEditValue = minValue * scale; \ maxEditValue = maxValue * scale - minEditValue; \ encoderPosition = (*ptr) * scale - minEditValue; \ callbackFunc = callback;\ } menu_edit_type(int, int3, itostr3, 1) menu_edit_type(float, float3, ftostr3, 1) menu_edit_type(float, float32, ftostr32, 100) menu_edit_type(float, float5, ftostr5, 0.01) menu_edit_type(float, float51, ftostr51, 10) menu_edit_type(float, float52, ftostr52, 100) menu_edit_type(unsigned long, long5, ftostr5, 0.01) #ifdef REPRAPWORLD_KEYPAD static void reprapworld_keypad_move_z_up() { encoderPosition = 1; move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; lcd_move_z(); } static void reprapworld_keypad_move_z_down() { encoderPosition = -1; move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; lcd_move_z(); } static void reprapworld_keypad_move_x_left() { encoderPosition = -1; move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; lcd_move_x(); } static void reprapworld_keypad_move_x_right() { encoderPosition = 1; move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; lcd_move_x(); } static void reprapworld_keypad_move_y_down() { encoderPosition = 1; move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; lcd_move_y(); } static void reprapworld_keypad_move_y_up() { encoderPosition = -1; move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; lcd_move_y(); } static void reprapworld_keypad_move_home() { enquecommand_P((PSTR("G28"))); // move all axis home } #endif /** End of menus **/ static void lcd_quick_feedback() { lcdDrawUpdate = 2; blocking_enc = millis() + 500; lcd_implementation_quick_feedback(); } /** Menu action functions **/ static void menu_action_back(menuFunc_t data) { lcd_goto_menu(data); } static void menu_action_submenu(menuFunc_t data) { lcd_goto_menu(data); } static void menu_action_gcode(const char* pgcode) { enquecommand_P(pgcode); } static void menu_action_function(menuFunc_t data) { (*data)(); } static void menu_action_sdfile(const char* filename, char* longFilename) { char cmd[30]; char* c; sprintf_P(cmd, PSTR("M23 %s"), filename); for(c = &cmd[4]; *c; c++) *c = tolower(*c); enquecommand(cmd); enquecommand_P(PSTR("M24")); lcd_return_to_status(); } static void menu_action_sddirectory(const char* filename, char* longFilename) { card.chdir(filename); encoderPosition = 0; } static void menu_action_setting_edit_bool(const char* pstr, bool* ptr) { *ptr = !(*ptr); } #endif//ULTIPANEL /** LCD API **/ void lcd_init() { lcd_implementation_init(); #ifdef NEWPANEL pinMode(BTN_EN1,INPUT); pinMode(BTN_EN2,INPUT); WRITE(BTN_EN1,HIGH); WRITE(BTN_EN2,HIGH); #if BTN_ENC > 0 pinMode(BTN_ENC,INPUT); WRITE(BTN_ENC,HIGH); #endif #ifdef REPRAPWORLD_KEYPAD pinMode(SHIFT_CLK,OUTPUT); pinMode(SHIFT_LD,OUTPUT); pinMode(SHIFT_OUT,INPUT); WRITE(SHIFT_OUT,HIGH); WRITE(SHIFT_LD,HIGH); #endif #else // Not NEWPANEL #ifdef SR_LCD_2W_NL // Non latching 2 wire shift register pinMode (SR_DATA_PIN, OUTPUT); pinMode (SR_CLK_PIN, OUTPUT); #elif defined(SHIFT_CLK) pinMode(SHIFT_CLK,OUTPUT); pinMode(SHIFT_LD,OUTPUT); pinMode(SHIFT_EN,OUTPUT); pinMode(SHIFT_OUT,INPUT); WRITE(SHIFT_OUT,HIGH); WRITE(SHIFT_LD,HIGH); WRITE(SHIFT_EN,LOW); #else #ifdef ULTIPANEL #error ULTIPANEL requires an encoder #endif #endif // SR_LCD_2W_NL #endif//!NEWPANEL #if defined (SDSUPPORT) && defined(SDCARDDETECT) && (SDCARDDETECT > 0) pinMode(SDCARDDETECT,INPUT); WRITE(SDCARDDETECT, HIGH); lcd_oldcardstatus = IS_SD_INSERTED; #endif//(SDCARDDETECT > 0) #ifdef LCD_HAS_SLOW_BUTTONS slow_buttons = 0; #endif lcd_buttons_update(); #ifdef ULTIPANEL encoderDiff = 0; #endif } void lcd_update() { static unsigned long timeoutToStatus = 0; #ifdef LCD_HAS_SLOW_BUTTONS slow_buttons = lcd_implementation_read_slow_buttons(); // buttons which take too long to read in interrupt context #endif lcd_buttons_update(); #if (SDCARDDETECT > 0) if((IS_SD_INSERTED != lcd_oldcardstatus && lcd_detected())) { lcdDrawUpdate = 2; lcd_oldcardstatus = IS_SD_INSERTED; lcd_implementation_init(); // to maybe revive the LCD if static electricity killed it. if(lcd_oldcardstatus) { card.initsd(); LCD_MESSAGEPGM(MSG_SD_INSERTED); } else { card.release(); LCD_MESSAGEPGM(MSG_SD_REMOVED); } } #endif//CARDINSERTED if (lcd_next_update_millis < millis()) { #ifdef ULTIPANEL #ifdef REPRAPWORLD_KEYPAD if (REPRAPWORLD_KEYPAD_MOVE_Z_UP) { reprapworld_keypad_move_z_up(); } if (REPRAPWORLD_KEYPAD_MOVE_Z_DOWN) { reprapworld_keypad_move_z_down(); } if (REPRAPWORLD_KEYPAD_MOVE_X_LEFT) { reprapworld_keypad_move_x_left(); } if (REPRAPWORLD_KEYPAD_MOVE_X_RIGHT) { reprapworld_keypad_move_x_right(); } if (REPRAPWORLD_KEYPAD_MOVE_Y_DOWN) { reprapworld_keypad_move_y_down(); } if (REPRAPWORLD_KEYPAD_MOVE_Y_UP) { reprapworld_keypad_move_y_up(); } if (REPRAPWORLD_KEYPAD_MOVE_HOME) { reprapworld_keypad_move_home(); } #endif if (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP) { lcdDrawUpdate = 1; encoderPosition += encoderDiff / ENCODER_PULSES_PER_STEP; encoderDiff = 0; timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS; } if (LCD_CLICKED) timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS; #endif//ULTIPANEL #ifdef DOGLCD // Changes due to different driver architecture of the DOGM display blink++; // Variable for fan animation and alive dot u8g.firstPage(); do { u8g.setFont(u8g_font_6x10_marlin); u8g.setPrintPos(125,0); if (blink % 2) u8g.setColorIndex(1); else u8g.setColorIndex(0); // Set color for the alive dot u8g.drawPixel(127,63); // draw alive dot u8g.setColorIndex(1); // black on white (*currentMenu)(); if (!lcdDrawUpdate) break; // Terminate display update, when nothing new to draw. This must be done before the last dogm.next() } while( u8g.nextPage() ); #else (*currentMenu)(); #endif #ifdef LCD_HAS_STATUS_INDICATORS lcd_implementation_update_indicators(); #endif #ifdef ULTIPANEL if(timeoutToStatus < millis() && currentMenu != lcd_status_screen) { lcd_return_to_status(); lcdDrawUpdate = 2; } #endif//ULTIPANEL if (lcdDrawUpdate == 2) lcd_implementation_clear(); if (lcdDrawUpdate) lcdDrawUpdate--; lcd_next_update_millis = millis() + LCD_UPDATE_INTERVAL; } } void lcd_ignore_click(bool b) { ignore_click = b; wait_for_unclick = false; } void lcd_setstatus(const char* message) { if (lcd_status_message_level > 0) return; strncpy(lcd_status_message, message, LCD_WIDTH); size_t i = strlen(lcd_status_message); memset(lcd_status_message + i, ' ', LCD_WIDTH - i); lcd_status_message[LCD_WIDTH] = '\0'; lcdDrawUpdate = 2; #ifdef FILAMENT_LCD_DISPLAY message_millis=millis(); //get status message to show up for a while #endif } void lcd_setstatuspgm(const char* message) { if (lcd_status_message_level > 0) return; strncpy_P(lcd_status_message, message, LCD_WIDTH); size_t i = strlen(lcd_status_message); memset(lcd_status_message + i, ' ', LCD_WIDTH - i); lcd_status_message[LCD_WIDTH] = '\0'; lcdDrawUpdate = 2; #ifdef FILAMENT_LCD_DISPLAY message_millis=millis(); //get status message to show up for a while #endif } void lcd_setalertstatuspgm(const char* message) { lcd_setstatuspgm(message); lcd_status_message_level = 1; #ifdef ULTIPANEL lcd_return_to_status(); #endif//ULTIPANEL } void lcd_reset_alert_level() { lcd_status_message_level = 0; } #ifdef DOGLCD void lcd_setcontrast(uint8_t value) { lcd_contrast = value & 63; u8g.setContrast(lcd_contrast); } #endif #ifdef ULTIPANEL /* Warning: This function is called from interrupt context */ void lcd_buttons_update() { #ifdef NEWPANEL uint8_t newbutton=0; if(READ(BTN_EN1)==0) newbutton|=EN_A; if(READ(BTN_EN2)==0) newbutton|=EN_B; #if BTN_ENC > 0 if((blocking_enc>1; if(READ(SHIFT_OUT)) newbutton_reprapworld_keypad|=(1<<7); WRITE(SHIFT_CLK,HIGH); WRITE(SHIFT_CLK,LOW); } buttons_reprapworld_keypad=~newbutton_reprapworld_keypad; //invert it, because a pressed switch produces a logical 0 #endif #else //read it from the shift register uint8_t newbutton=0; WRITE(SHIFT_LD,LOW); WRITE(SHIFT_LD,HIGH); unsigned char tmp_buttons=0; for(int8_t i=0;i<8;i++) { newbutton = newbutton>>1; if(READ(SHIFT_OUT)) newbutton|=(1<<7); WRITE(SHIFT_CLK,HIGH); WRITE(SHIFT_CLK,LOW); } buttons=~newbutton; //invert it, because a pressed switch produces a logical 0 #endif//!NEWPANEL //manage encoder rotation uint8_t enc=0; if (buttons & EN_A) enc |= B01; if (buttons & EN_B) enc |= B10; if(enc != lastEncoderBits) { switch(enc) { case encrot0: if(lastEncoderBits==encrot3) encoderDiff++; else if(lastEncoderBits==encrot1) encoderDiff--; break; case encrot1: if(lastEncoderBits==encrot0) encoderDiff++; else if(lastEncoderBits==encrot2) encoderDiff--; break; case encrot2: if(lastEncoderBits==encrot1) encoderDiff++; else if(lastEncoderBits==encrot3) encoderDiff--; break; case encrot3: if(lastEncoderBits==encrot2) encoderDiff++; else if(lastEncoderBits==encrot0) encoderDiff--; break; } } lastEncoderBits = enc; } bool lcd_detected(void) { #if (defined(LCD_I2C_TYPE_MCP23017) || defined(LCD_I2C_TYPE_MCP23008)) && defined(DETECT_DEVICE) return lcd.LcdDetected() == 1; #else return true; #endif } void lcd_buzz(long duration, uint16_t freq) { #ifdef LCD_USE_I2C_BUZZER lcd.buzz(duration,freq); #endif } bool lcd_clicked() { return LCD_CLICKED; } #endif//ULTIPANEL /********************************/ /** Float conversion utilities **/ /********************************/ // convert float to string with +123.4 format char conv[8]; char *ftostr3(const float &x) { return itostr3((int)x); } char *itostr2(const uint8_t &x) { //sprintf(conv,"%5.1f",x); int xx=x; conv[0]=(xx/10)%10+'0'; conv[1]=(xx)%10+'0'; conv[2]=0; return conv; } // convert float to string with +123.4 format char *ftostr31(const float &x) { int xx=x*10; conv[0]=(xx>=0)?'+':'-'; xx=abs(xx); conv[1]=(xx/1000)%10+'0'; conv[2]=(xx/100)%10+'0'; conv[3]=(xx/10)%10+'0'; conv[4]='.'; conv[5]=(xx)%10+'0'; conv[6]=0; return conv; } // convert float to string with 123.4 format char *ftostr31ns(const float &x) { int xx=x*10; //conv[0]=(xx>=0)?'+':'-'; xx=abs(xx); conv[0]=(xx/1000)%10+'0'; conv[1]=(xx/100)%10+'0'; conv[2]=(xx/10)%10+'0'; conv[3]='.'; conv[4]=(xx)%10+'0'; conv[5]=0; return conv; } char *ftostr32(const float &x) { long xx=x*100; if (xx >= 0) conv[0]=(xx/10000)%10+'0'; else conv[0]='-'; xx=abs(xx); conv[1]=(xx/1000)%10+'0'; conv[2]=(xx/100)%10+'0'; conv[3]='.'; conv[4]=(xx/10)%10+'0'; conv[5]=(xx)%10+'0'; conv[6]=0; return conv; } //Float to string with 1.23 format char *ftostr12ns(const float &x) { long xx=x*100; xx=abs(xx); conv[0]=(xx/100)%10+'0'; conv[1]='.'; conv[2]=(xx/10)%10+'0'; conv[3]=(xx)%10+'0'; conv[4]=0; return conv; } // convert float to space-padded string with -_23.4_ format char *ftostr32sp(const float &x) { long xx = abs(x * 100); uint8_t dig; if (x < 0) { // negative val = -_0 conv[0] = '-'; dig = (xx / 1000) % 10; conv[1] = dig ? '0' + dig : ' '; } else { // positive val = __0 dig = (xx / 10000) % 10; if (dig) { conv[0] = '0' + dig; conv[1] = '0' + (xx / 1000) % 10; } else { conv[0] = ' '; dig = (xx / 1000) % 10; conv[1] = dig ? '0' + dig : ' '; } } conv[2] = '0' + (xx / 100) % 10; // lsd always dig = xx % 10; if (dig) { // 2 decimal places conv[5] = '0' + dig; conv[4] = '0' + (xx / 10) % 10; conv[3] = '.'; } else { // 1 or 0 decimal place dig = (xx / 10) % 10; if (dig) { conv[4] = '0' + dig; conv[3] = '.'; } else { conv[3] = conv[4] = ' '; } conv[5] = ' '; } conv[6] = '\0'; return conv; } char *itostr31(const int &xx) { conv[0]=(xx>=0)?'+':'-'; conv[1]=(xx/1000)%10+'0'; conv[2]=(xx/100)%10+'0'; conv[3]=(xx/10)%10+'0'; conv[4]='.'; conv[5]=(xx)%10+'0'; conv[6]=0; return conv; } // Convert int to rj string with 123 or -12 format char *itostr3(const int &x) { int xx = x; if (xx < 0) { conv[0]='-'; xx = -xx; } else if (xx >= 100) conv[0]=(xx/100)%10+'0'; else conv[0]=' '; if (xx >= 10) conv[1]=(xx/10)%10+'0'; else conv[1]=' '; conv[2]=(xx)%10+'0'; conv[3]=0; return conv; } char *itostr3left(const int &xx) { if (xx >= 100) { conv[0]=(xx/100)%10+'0'; conv[1]=(xx/10)%10+'0'; conv[2]=(xx)%10+'0'; conv[3]=0; } else if (xx >= 10) { conv[0]=(xx/10)%10+'0'; conv[1]=(xx)%10+'0'; conv[2]=0; } else { conv[0]=(xx)%10+'0'; conv[1]=0; } return conv; } // Convert int to rj string with 1234 format char *itostr4(const int &xx) { conv[0] = xx >= 1000 ? (xx / 1000) % 10 + '0' : ' '; conv[1] = xx >= 100 ? (xx / 100) % 10 + '0' : ' '; conv[2] = xx >= 10 ? (xx / 10) % 10 + '0' : ' '; conv[3] = xx % 10 + '0'; conv[4] = 0; return conv; } // convert float to rj string with 12345 format char *ftostr5(const float &x) { long xx = abs(x); conv[0] = xx >= 10000 ? (xx / 10000) % 10 + '0' : ' '; conv[1] = xx >= 1000 ? (xx / 1000) % 10 + '0' : ' '; conv[2] = xx >= 100 ? (xx / 100) % 10 + '0' : ' '; conv[3] = xx >= 10 ? (xx / 10) % 10 + '0' : ' '; conv[4] = xx % 10 + '0'; conv[5] = 0; return conv; } // convert float to string with +1234.5 format char *ftostr51(const float &x) { long xx=x*10; conv[0]=(xx>=0)?'+':'-'; xx=abs(xx); conv[1]=(xx/10000)%10+'0'; conv[2]=(xx/1000)%10+'0'; conv[3]=(xx/100)%10+'0'; conv[4]=(xx/10)%10+'0'; conv[5]='.'; conv[6]=(xx)%10+'0'; conv[7]=0; return conv; } // convert float to string with +123.45 format char *ftostr52(const float &x) { long xx=x*100; conv[0]=(xx>=0)?'+':'-'; xx=abs(xx); conv[1]=(xx/10000)%10+'0'; conv[2]=(xx/1000)%10+'0'; conv[3]=(xx/100)%10+'0'; conv[4]='.'; conv[5]=(xx/10)%10+'0'; conv[6]=(xx)%10+'0'; conv[7]=0; return conv; } // Callback for after editing PID i value // grab the PID i value out of the temp variable; scale it; then update the PID driver void copy_and_scalePID_i() { #ifdef PIDTEMP Ki = scalePID_i(raw_Ki); updatePID(); #endif } // Callback for after editing PID d value // grab the PID d value out of the temp variable; scale it; then update the PID driver void copy_and_scalePID_d() { #ifdef PIDTEMP Kd = scalePID_d(raw_Kd); updatePID(); #endif } #endif //ULTRA_LCD