Firmware/Marlin/example_configurations/BQ/Hephestos_2
Scott Lahteine e37a1ded0d Increase BABYSTEP_MULTIPLICATOR to 100
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
2017-09-27 00:14:26 -05:00
..
_Bootscreen.h Arrange example configurations by vendor 2017-07-07 04:48:23 -05:00
Configuration_adv.h Increase BABYSTEP_MULTIPLICATOR to 100 2017-09-27 00:14:26 -05:00
Configuration.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
README.md Arrange example configurations by vendor 2017-07-07 04:48:23 -05:00

Example Configuration for BQ Hephestos 2

This configuration file is based on the original configuration file shipped with the heavily modified Marlin fork by BQ. The original firmware and configuration file can be found at BQ Github repository.

NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will change by using the original Marlin firmware.

Changelog

  • 2016/03/01 - Initial release

  • 2016/03/21 - Activated 4-point auto leveling by default Updated miscellaneous z-probe values

  • 2016/06/21 - Disabled hot bed related options Activated software endstops SD printing now disables the heater when finished

  • 2016/07/13 - Update the DEFAULT_AXIS_STEPS_PER_UNIT for the Z axis Increased the DEFAULT_XYJERK

  • 2016/12/13 - Configuration updated.

  • 2017/07/06 - Configuration updated to the latest Marlin version. Added support for the official BQ heated bed kit.