Firmware

History

Rowan Meara 094bebcc2d [1.1.x] Update Thermal Protection Documentation (#8282 ) * Fix thermal protection documentation. Even before the recent thermal protection changes, the documentation of the thermal protection feature in the config files did not match the implementation. I fixed the documentation and reconciled the M303 implementation with the documentation. * Applied documentation changes to sample config files * Renamed hysteresis to watch_temp_increase * Added gcodes back into documentation.	2017-11-07 15:52:28 -06:00
..
Configuration.h	[1.1.x] Update Thermal Protection Documentation (#8282 )	2017-11-07 15:52:28 -06:00
README.txt

Rowan Meara 094bebcc2d [1.1.x] Update Thermal Protection Documentation (#8282 )

* Fix thermal protection documentation.

Even before the recent thermal protection changes, the documentation of
the thermal protection feature in the config files did not match the
implementation.  I fixed the documentation and reconciled the M303
implementation with the documentation.

* Applied documentation changes to sample config files

* Renamed hysteresis to watch_temp_increase

* Added gcodes back into documentation.

2017-11-07 15:52:28 -06:00

Configuration.h

[1.1.x] Update Thermal Protection Documentation (#8282 )

2017-11-07 15:52:28 -06:00

README.txt

This is an example configuration for the CL-260 Ultimaker 2 clone.
Change Z_MAX_POS to 300 for the CL-260MAX.

(The printer is available on AliExpress; be aware that this is not a beginner's
printer -- it needs tweaking and some parts replaced before being decent.)

The printer comes with a quite old Marlin, the sources are available here:
http://www.thingiverse.com/thing:1635830/ and I recommend replacing them.

The setting "works" for my printer and the extruder using my calibration value.
You might want to tweak some settings, e.g enable EEPROM, increase default Z speed, adjust homing speeds,...

Have fun!
--
tobi