Firmware/Marlin/pins_TRIGORILLA_14.h
Scott Lahteine 222014e78c AnyCubic Trigorilla 1.4 changes
Co-Authored-By: grbd <garlicbready@googlemail.com>
2018-09-15 23:17:59 -05:00

82 lines
2.3 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino Mega with RAMPS v1.4 for Anycubic
*/
#ifndef BOARD_NAME
#define BOARD_NAME "Anycubic RAMPS 1.4"
#endif
#define IS_RAMPS_EFB
// FAN0 / D9 - Typically used for the part fan on Anycubic Delta devices
#define FAN_PIN 9
// FAN1 / D7 - Typically unused, can be allocated as Case Fan
// FAN2 / D44 - Typical Extruder Fan on Anycubic Delta devices
#define FAN2_PIN 44
#define ORIG_E0_AUTO_FAN_PIN 44
#include "pins_RAMPS.h"
// TODO 1.4 boards do have an E1 stepper driver. However the pin definitions
// from pins_RAMPS.h are incorrect for this board. e.g., Pin 44 is the Extruder fan.
#undef E1_STEP_PIN
#undef E1_DIR_PIN
#undef E1_ENABLE_PIN
#undef E1_CS_PIN
//
// AnyCubic made the following changes to 1.1.0-RC8
// If these are appropriate for your LCD let us know.
//
#if 0 && ENABLED(ULTRA_LCD)
// LCD Display output pins
#if ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
#undef LCD_PINS_D6
#define LCD_PINS_D6 57
#endif
// LCD Display input pins
#if ENABLED(NEWPANEL)
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#undef DOGLCD_A0
#define DOGLCD_A0 23
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#undef BEEPER_PIN
#define BEEPER_PIN 33
#undef LCD_BACKLIGHT_PIN
#define LCD_BACKLIGHT_PIN 67
#endif
#elif ENABLED(MINIPANEL)
#undef BEEPER_PIN
#define BEEPER_PIN 33
#undef DOGLCD_A0
#define DOGLCD_A0 42
#endif
#endif // ULTRA_LCD