Firmware/Marlin/language_kanji.h
2015-03-10 17:46:25 +01:00

148 lines
12 KiB
C

/**
* Japanese (Kanji)
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef DOGLCD
#include "language_kana.h" // fallback to kana
#define LANGUAGE_KANJI_H
#endif
#ifndef LANGUAGE_KANJI_H
#define LANGUAGE_KANJI_H
#define MAPPER_NON
#define DISPLAY_CHARSET_KANJI
// HINT FOR ichibey; YOU CAN NOW MAKE USE OF THE LAST 8 SYMBOLS FOR YOUT PURPOSE, SINCE THE MARLIN_SYMBOLS NOW HAVE THEIR OWN FONT:
// 漢字混じり表示
#define WELCOME_MSG MACHINE_NAME "\x8a\x8b\x90\x91\xa4\xa5\x7f" // "ready."
#define MSG_SD_INSERTED "SD\xb6\xb0\xc4\xde\x20\x84\xa2\xa3\xbb\xda\xcf\xbc\xc0" // "Card inserted"
#define MSG_SD_REMOVED "SD\xb6\xb0\xc4\xde\x20\x84\xe3\xb6\xda\xcf\xbc\xc0" // "Card removed"
#define MSG_MAIN "\xd2\xb2\xdd" // "Main"
#define MSG_AUTOSTART "\x93\x88\xb6\xb6\xb2\xbc" // "Autostart"
#define MSG_DISABLE_STEPPERS "\xd3\xb0\xc0\xb0\xe7\xe8\xe9\xea\x20\xb5\xcc" // "Disable steppers"
#define MSG_AUTO_HOME "\x98\x99\x9a\x9b\xcd \x86\x87\x88\xb6" // "Auto home"
#define MSG_SET_HOME_OFFSETS "\x8c\x8d\x8a\x8b\xb5\xcc\xbe\xaf\xc4\xf1\xf2\xf3\xf4" // "Set home offsets"
#define MSG_SET_ORIGIN "\x8c\x8d\x8a\x8b\xbe\xaf\xc4" // "Set origin"
#define MSG_PREHEAT_PLA "PLA \x92\x94\x95" // "Preheat PLA"
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " "
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " \x96\x97\xc3" // " All"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " \xcd\xde\xaf\xc4\xde" // "Bed"
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " \xbe\xaf\xc3\xb2" // "conf"
#define MSG_PREHEAT_ABS "ABS \x92\x94\x95" // "Preheat ABS"
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " "
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " \xbd\xcd\xde\xc3" // " All"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " \xcd\xde\xaf\xc4\xde" // "Bed"
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " \xbe\xaf\xc3\xb2" // "conf"
#define MSG_COOLDOWN "\xb6\xe5\x94\x95\xb2\x9e\xf7" // "Cooldown"
#define MSG_SWITCH_PS_ON "\xe7\xe8\xe9\xea\x20\xb5\xdd" // "Switch power on"
#define MSG_SWITCH_PS_OFF "\xe7\xe8\xe9\xea\x20\xb5\xcc" // "Switch power off"
#define MSG_EXTRUDE "\x84\x85\xbc\xc0\xde\xbc" // "Extrude"
#define MSG_RETRACT "\xd8\xc4\xd7\xb8\xc4" // "Retract"
#define MSG_MOVE_AXIS "\x8e\x8f\x86\x87\x88\xb6" // "Move axis"
#define MSG_MOVE_X "X\x8e\x8f\x86\x87\x88\xb6" // "Move X"
#define MSG_MOVE_Y "Y\x8e\x8f\x86\x87\x88\xb6" // "Move Y"
#define MSG_MOVE_Z "Z\x8e\x8f\x86\x87\x88\xb6" // "Move Z"
#define MSG_MOVE_E "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0" // "Extruder"
#define MSG_MOVE_01MM "0.1mm \x86\x87\x88\xb6" // "Move 0.1mm"
#define MSG_MOVE_1MM " 1mm \x86\x87\x88\xb6" // "Move 1mm"
#define MSG_MOVE_10MM " 10mm \x86\x87\x88\xb6" // "Move 10mm"
#define MSG_SPEED "\xbd\xcb\xdf\xb0\xc4\xde" // "Speed"
#define MSG_NOZZLE "\xc9\xbd\xde\xd9" // "Nozzle"
#define MSG_BED "\xcd\xde\xaf\xc4\xde" // "Bed"
#define MSG_FAN_SPEED "\xcc\xa7\xdd\xed\xe6\x82\x83" // "Fan speed"
#define MSG_FLOW "\xed\xee\xd8\x7d" // "Flow"
#define MSG_CONTROL "\xba\xdd\xc4\xdb\xb0\xd9" // "Control"
#define MSG_MIN LCD_STR_THERMOMETER " Min"
#define MSG_MAX LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR LCD_STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "\x93\x88\xb6\x80\x81\x82\x83" // "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "\xb6\xe5\xed\xe6\x82\x83" // "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_TEMPERATURE "\x80\x81\x82\x83" // "Temperature"
#define MSG_MOTION "\x88\xb6\xef\xf1\xf2\xf3\xf4" // "Motion"
#define MSG_VOLUMETRIC "\xcc\xa8\xd7\xd2\xdd\xc4" // "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4"
#define MSG_CONTRAST "LCD\xba\xdd\xc4\xd7\xbd\xc4" // "LCD contrast"
#define MSG_STORE_EPROM "\xd2\xd3\xd8\xcd\xb6\xb8\xc9\xb3" // "Store memory"
#define MSG_LOAD_EPROM "\xd2\xd3\xd8\xb6\xd7\xd6\xd0\ba\xd0" // "Load memory"
#define MSG_RESTORE_FAILSAFE "\xf1\xf2\xf3\xf4\xd8\xbe\xaf\xc4" // "Restore failsafe"
#define MSG_REFRESH "\xd8\xcc\xda\xaf\xbc\xad" // "Refresh"
#define MSG_WATCH "\xb2\xdd\xcc\xab" // "Info screen"
#define MSG_PREPARE "\x8a\x8b\x90\x91\xf1\xf2\xf3\xf4" // "Prepare"
#define MSG_TUNE "\xf1\x9f\x9c\x9d" // "Tune"
#define MSG_PAUSE_PRINT "\xb0\xf5\xf6\xb2\x9e\xf7" // "Pause print"
#define MSG_RESUME_PRINT "\xcc\xdf\xd8\xdd\xc4 \xa0\xa1\x7b\x7c" // "Resume print"
#define MSG_STOP_PRINT "\xcc\xdf\xd8\xdd\xc4 \xb2\x9e\xf7" // "Stop print"
#define MSG_CARD_MENU "SD\xb6\xb0\xc4\xde\xb6\xd7\xcc\xdf\xd8\xdd\xc4" // "Print from SD"
#define MSG_NO_CARD "SD\xb6\xb0\xc4\xde\xb6\xde\xb1\xd8\xcf\xbe\xdd" // "No SD card"
#define MSG_DWELL "\xbd\xd8\xb0\xcc\xdf" // "Sleep..."
#define MSG_USERWAIT "\xbc\xca\xde\xd7\xb9\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "Wait for user..."
#define MSG_RESUMING "\xcc\xdf\xd8\xdd\xc4 \xa0\xa1\x7b\x7c" // "Resuming print"
#define MSG_PRINT_ABORTED "\xcc\xdf\xd8\xdd\xc4\xc1\xad\xb3\xbc\xbb\xda\xcf\xbc\xc0" // "Print aborted"
#define MSG_NO_MOVE "\x88\xb6\xb7\xcf\xbe\xdd" // "No move."
#define MSG_KILLED "\xbc\xae\xb3\xb7\xae" // "KILLED. "
#define MSG_STOPPED "\xb2\x9e\xf7\xbc\xcf\xbc\xc0" // "STOPPED. "
#define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"
#define MSG_CONTROL_RETRACTF "Retract V"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "\xcc\xa8\xd7\xd2\xdd\xc4\xeb\xec\x84\xe4" // "Change filament"
#define MSG_INIT_SDCARD "SD\xb6\xb0\xc4\xde\\xa0\xa1\xd6\xd0\xba\xd0" // "Init. SD card"
#define MSG_CNG_SDCARD "SD\xb6\xb0\xc4\xde\xeb\xec\x84\xe4" // "Change SD card"
#define MSG_ZPROBE_OUT "Z\xcc\xdf\xdb\xb0\xcc\xde \xcd\xde\xaf\xc4\xee\xb6\xde\xb2" // "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "\xb9\xde\xdd\xc3\xdd\xcaXY\xb2\xc4\xde\xb3\xba\xdeZ" // "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z\xb5\xcc\xbe\xaf\xc4" // "Z Offset"
#define MSG_BABYSTEP_X "\xcb\xde\xc4\xde\xb3 X" // "Babystep X"
#define MSG_BABYSTEP_Y "\xcb\xde\xc4\xde\xb3 Y" // "Babystep Y"
#define MSG_BABYSTEP_Z "\xcb\xde\xc4\xde\xb3 Z" // "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_HEATING "\xb6\xe5\x94\x95\x89..." // "Heating..."
#define MSG_HEATING_COMPLETE "\xb6\xe5\x94\x95\xa4\xa5\x7f" // "Heating done."
#define MSG_BED_HEATING "\xcd\xde\xaf\xc4\xde\xb6\xe5\x94\x95\x89" // "Bed Heating."
#define MSG_BED_DONE "\xcd\xde\xaf\xc4\xde\xb6\xe5\x94\x95\xa4\xa5\x7f" // "Bed done."
#define MSG_ENDSTOPS_HIT "endstops hit: "
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA_CALIBRATION_MENU
#endif // LANGUAGE_JP2_H