Firmware/Marlin/printcounter.cpp
2016-04-29 23:13:58 +01:00

110 lines
3.0 KiB
C++

/*
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "Marlin.h"
#include "printcounter.h"
#include <avr/eeprom.h>
PrintCounter::PrintCounter(): super() {}
void PrintCounter::tick() {
if (!this->isRunning()) return;
static uint32_t update_before = millis(),
eeprom_before = millis();
uint32_t now = millis();
// Trying to get the amount of calculations down to the bare min
const static uint16_t i = this->updateInterval * 1000;
if (now - update_before >= i) {
//this->addToTimeCounter((uint16_t) (now - update_before) / 1000);
update_before = now;
PrintCounter::debug(PSTR("tick1"));
}
// Trying to get the amount of calculations down to the bare min
const static uint16_t j = this->saveInterval * 1000;
if (now - eeprom_before >= j) {
eeprom_before = now;
this->save();
}
}
void PrintCounter::load() {
uint16_t pos = this->addr;
this->data.successPrints= eeprom_read_word ((uint16_t*) pos);
this->data.failedPrints = eeprom_read_word ((uint16_t*) pos);
this->data.printTime = eeprom_read_dword((uint32_t*) pos);
this->data.longestPrint = eeprom_read_dword((uint32_t*) pos);
SERIAL_ECHOPGM("successPrints: ");
SERIAL_ECHOLN(this->data.successPrints);
SERIAL_ECHOPGM("failedPrints: ");
SERIAL_ECHOLN(this->data.failedPrints);
SERIAL_ECHOPGM("printTime: ");
SERIAL_ECHOLN(this->data.printTime);
SERIAL_ECHOPGM("longestPrint: ");
SERIAL_ECHOLN(this->data.longestPrint);
}
void PrintCounter::save() {
#if ENABLED(DEBUG_PRINTCOUNTER)
PrintCounter::debug(PSTR("save"));
#endif
uint16_t pos = this->addr;
eeprom_write_word ((uint16_t*) pos, this->data.successPrints);
eeprom_write_word ((uint16_t*) pos, this->data.failedPrints);
eeprom_write_dword((uint32_t*) pos, this->data.printTime);
eeprom_write_dword((uint32_t*) pos, this->data.longestPrint);
}
void PrintCounter::start() {
super::start();
this->load();
}
void PrintCounter::stop() {
super::stop();
this->save();
}
#if ENABLED(DEBUG_PRINTCOUNTER)
void PrintCounter::debug(const char func[]) {
if (DEBUGGING(INFO)) {
SERIAL_ECHOPGM("PrintCounter::");
serialprintPGM(func);
SERIAL_ECHOLNPGM("()");
}
}
#endif