MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
445d39e95a
Firmware/Marlin
History
Bob-the-Kuhn 445d39e95a CORExx endstop detection fixes 
1. The CORExx printers were checking more endstop axis than needed.

2. Removed all the CORE_xx_NOT logic.  The motor_direction(xx) routine
always returns the correct data so it is not needed.  It was actually
cause the wrong direction to be checked in some cases.

3. Made the logic/defines for X, Y & Z axis all the same.  The old logic
checked inappropriate configurations for Y and didn't check all the
correct configurations on Z.

4. Added a check for zero steps before the X, Y & Z axis.  Previously
would check the they axis even if there were no movement.
2017-04-13 21:43:37 -05:00
..
example_configurations Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
blinkm.cpp
blinkm.h
boards.h Cheaptronic V2 2017-04-09 06:57:43 -05:00
buzzer.h fixed warning: ISO C++ forbids compound-literals 2016-10-22 11:23:16 -05:00
cardreader.cpp simplified M20 with size 2017-04-13 04:56:58 -05:00
cardreader.h Dynamic allocation for SDCARD_SORT_ALPHA 2017-02-14 21:37:25 -06:00
circularqueue.h Patch up CircularQueue 2016-08-02 18:57:15 -07:00
Conditionals_LCD.h Add support for an RGBW LED 2017-04-11 12:58:55 -05:00
Conditionals_post.h Added support for delta tower angle corrections. 2017-04-08 21:13:44 -05:00
Conditionals.h Make Conditionals.h a catch-all for old configs 2016-07-30 04:25:30 -07:00
Configuration_adv.h Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
configuration_store.cpp Add code to handle changes to zprobe_zoffset 2017-04-13 15:46:35 -05:00
configuration_store.h Convert config code to a static class 2017-04-09 22:06:41 -05:00
Configuration.h Add support for an RGBW LED 2017-04-11 12:58:55 -05:00
dac_mcp4728.cpp Fix DAC current code 2016-10-17 15:17:57 -05:00
dac_mcp4728.h Fix DAC current code 2016-10-17 15:17:57 -05:00
digipot_mcp4018.cpp Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors. 2017-04-09 06:45:03 -05:00
digipot_mcp4451.cpp Add digipot i2c control for MCP4018 2017-04-09 06:44:53 -05:00
dogm_bitmaps.h Updates u8glib's bmp2hex converter 2016-07-19 03:16:30 +01:00
dogm_font_data_6x9_marlin.h
dogm_font_data_HD44780_C.h
dogm_font_data_HD44780_J.h
dogm_font_data_HD44780_W.h
dogm_font_data_ISO10646_1_tr.h Improve M600 with timeout, wait for heatup. 2017-02-15 05:29:34 -06:00
dogm_font_data_ISO10646_1.h
dogm_font_data_ISO10646_5_Cyrillic.h
dogm_font_data_ISO10646_CN.h
dogm_font_data_ISO10646_Greek.h Change font decent to -1 for tt and gr 2016-11-26 02:29:23 +01:00
dogm_font_data_ISO10646_Kana.h
dogm_font_data_Marlin_symbols.h
duration_t.h Fix formatting of print time hours above one day 2017-03-01 18:55:25 +02:00
endstop_interrupts.h Add and apply WITHIN macro 2017-03-31 09:27:48 -05:00
endstops.cpp CORExx endstop detection fixes 2017-04-13 21:43:37 -05:00
endstops.h guaranteed BLTouch detection 2017-02-11 12:01:34 -06:00
enum.h Make ADC sensor reading frequency adjustable 2017-04-09 22:18:21 -05:00
fastio.h Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e 2016-10-31 08:01:41 -05:00
G26_Mesh_Validation_Tool.cpp UBL's Grid Based Leveling code 2017-04-06 19:55:41 -05:00
hex_print_routines.cpp Apply coding standards to M100, break up into functions 2017-04-10 21:09:43 -05:00
hex_print_routines.h Apply coding standards to M100, break up into functions 2017-04-10 21:09:43 -05:00
language_an.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_bg.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_ca.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_cn.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_cz.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_da.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_de.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_el-gr.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_el.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_en.h Fix EPROM -> EEPROM 2017-04-10 18:37:00 +02:00
language_es.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_eu.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_fi.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_fr.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_gl.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_hr.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_it.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_kana_utf8.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_kana.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_nl.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_pl.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_pt_utf8.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_pt-br_utf8.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_pt-br.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_pt.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_ru.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_test.h Keep SIMULATE_ROMFONT only language.h 2016-08-15 19:11:31 -07:00
language_tr.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_uk.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
language_zh_CN.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_zh_TW.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language.h Header and pins changes to support 5 extruders 2017-04-07 10:46:36 -05:00
least_squares_fit.cpp Patches to UBL 2017-04-08 14:59:14 -05:00
M100_Free_Mem_Chk.cpp M100 Fixes and Features 2017-04-13 18:20:53 -05:00
macros.h Fix MINIMUM_STEPPER_PULSE maths 2017-04-11 11:11:17 -05:00
Makefile Merge pull request #5994 from StefanBruens/fix_Makefile_errors 2017-03-29 06:32:08 -05:00
Marlin_main.cpp Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
Marlin.h Add code to handle changes to zprobe_zoffset 2017-04-13 15:46:35 -05:00
Marlin.ino TMC2130 Library: @teemuatlut replaces @makertum 2017-03-07 04:22:06 -06:00
MarlinConfig.h Merge pull request #4419 from AnHardt/sd2pinmap 2016-07-28 17:38:46 -07:00
MarlinSerial.cpp Patch MarlinSerial to match up with 32-bit version 2017-04-02 04:39:18 -05:00
MarlinSerial.h Patch MarlinSerial to match up with 32-bit version 2017-04-02 04:39:18 -05:00
mesh_bed_leveling.cpp Swap MBL z_values dimensions to [X][Y] 2017-04-12 17:24:05 -05:00
mesh_bed_leveling.h Swap MBL z_values dimensions to [X][Y] 2017-04-12 17:24:05 -05:00
nozzle.cpp Apply prior nozzle clean update 2017-03-06 03:14:59 -06:00
nozzle.h General comment cleanup 2017-04-08 18:58:33 -05:00
pins_3DRAG.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_5DPRINT.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_AZTEEG_X1.h
pins_AZTEEG_X3_PRO.h Header and pins changes to support 5 extruders 2017-04-07 10:46:36 -05:00
pins_AZTEEG_X3.h Patch pins files hotends/e-steppers sanity check 2017-04-07 10:46:33 -05:00
pins_BAM_DICE_DUE.h Patch pins files hotends/e-steppers sanity check 2017-04-07 10:46:33 -05:00
pins_BQ_ZUM_MEGA_3D.h Updated bq Hephestos 2 example configuration 2016-12-13 09:26:07 +00:00
pins_BRAINWAVE_PRO.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_BRAINWAVE.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_CHEAPTRONIC.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_CHEAPTRONICv2.h Cheaptronic V2 2017-04-09 06:57:43 -05:00
pins_CNCONTROLS_11.h Predefine auto fan pins in some pins files 2016-10-26 18:38:32 -05:00
pins_CNCONTROLS_12.h Predefine auto fan pins in some pins files 2016-10-26 18:38:32 -05:00
pins_ELEFU_3.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_FELIX2.h Patch pins files hotends/e-steppers sanity check 2017-04-07 10:46:33 -05:00
pins_GEN3_MONOLITHIC.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_GEN3_PLUS.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_GEN6_DELUXE.h
pins_GEN6.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_GEN7_12.h Label analog pins in a similar way 2016-10-05 06:13:30 -05:00
pins_GEN7_13.h Add "About Printer" information menu. 2016-07-02 15:22:26 -07:00
pins_GEN7_14.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_GEN7_CUSTOM.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_K8200.h
pins_K8400.h Disable SD Detect for K8400 2016-12-28 23:21:18 +01:00
pins_LEAPFROG.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_MEGACONTROLLER.h Patch pins files hotends/e-steppers sanity check 2017-04-07 10:46:33 -05:00
pins_MEGATRONICS_2.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_MEGATRONICS_3.h Remove unnecessary tabs and spaces 2016-12-16 00:21:32 +09:00
pins_MEGATRONICS.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_MELZI_MAKR3D.h #if defined => #ifdef / PIN_EXISTS 2017-03-22 20:51:11 -05:00
pins_MELZI.h #if defined => #ifdef / PIN_EXISTS 2017-03-22 20:51:11 -05:00
pins_MIGHTYBOARD_REVE.h Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE 2017-04-09 06:44:53 -05:00
pins_MINIRAMBO.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_MINITRONICS.h Patch pins files hotends/e-steppers sanity check 2017-04-07 10:46:33 -05:00
pins_MKS_13.h Patch pins files hotends/e-steppers sanity check 2017-04-07 10:46:33 -05:00
pins_MKS_BASE.h Patch pins files hotends/e-steppers sanity check 2017-04-07 10:46:33 -05:00
pins_OMCA_A.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_OMCA.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_PRINTRBOARD_REVF.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_PRINTRBOARD.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_RAMBO.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_RAMPS_13.h pins_RAMPS_14.h => pins_RAMPS.h 2016-07-30 04:17:21 -07:00
pins_RAMPS_OLD.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_RAMPS.h Add TMC2130 support 2016-11-21 00:17:45 -06:00
pins_RIGIDBOARD_V2.h # This is a combination of 2 commits. 2017-04-06 16:16:27 -05:00
pins_RIGIDBOARD.h Remove BEEPER_PIN override in pins_RIGIDBOARD.h 2017-03-01 18:26:29 -06:00
pins_RUMBA.h Patch pins files hotends/e-steppers sanity check 2017-04-07 10:46:33 -05:00
pins_SAINSMART_2IN1.h Patch pins files hotends/e-steppers sanity check 2017-04-07 10:46:33 -05:00
pins_SANGUINOLOLU_11.h Add Support TinyBoy2 OLED/Encoder panel 2017-03-31 04:05:34 -05:00
pins_SANGUINOLOLU_12.h #if defined => #ifdef / PIN_EXISTS 2017-03-22 20:51:11 -05:00
pins_SAV_MKI.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_SCOOVO_X9H.h Board A4JP should be SCOOVO_X9H 2017-03-27 22:22:13 -05:00
pins_SETHI.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_STB_11.h #if defined => #ifdef / PIN_EXISTS 2017-03-22 20:51:11 -05:00
pins_TEENSY2.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_TEENSYLU.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_ULTIMAIN_2.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_ULTIMAKER_OLD.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_ULTIMAKER.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins.h Cheaptronic V2 2017-04-09 06:57:43 -05:00
pinsDebug_list.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
pinsDebug_Teensyduino.h Remove extraneous whitespace 2017-03-18 03:17:39 -05:00
pinsDebug.h Cleanup following Pins Debug update 2017-04-08 18:59:57 -05:00
planner_bezier.cpp Improve planner kinematics, fix delta ABL 2016-10-09 13:32:46 -05:00
planner_bezier.h Append units to feedrate variables 2016-07-17 13:29:41 -07:00
planner.cpp Simplify stepper macros by renaming enable/disable macros 2017-04-11 11:10:26 -05:00
planner.h Cleanup to planner.cpp 2017-03-29 06:48:07 -05:00
platformio.ini Move platformio directories out of source tree 2016-10-08 13:45:26 -04:00
point_t.h Adds missing documentation to the point_t structure 2016-07-22 15:19:20 +01:00
printcounter.cpp General comment cleanup 2017-04-08 18:58:33 -05:00
printcounter.h General comment cleanup 2017-04-08 18:58:33 -05:00
qr_solve.cpp Enable ABL by type, support bilinear on cartesian 2016-09-25 23:35:37 -05:00
qr_solve.h Enable ABL by type, support bilinear on cartesian 2016-09-25 23:35:37 -05:00
SanityCheck.h Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
Sd2Card.cpp Fix SD_CHECK_AND_RETRY condition 2017-02-11 23:55:56 -06:00
Sd2Card.h repair-software-spi 2016-07-31 15:50:42 +02:00
SdBaseFile.cpp Clear dir_t size, not pointer size 2016-10-25 22:59:40 -05:00
SdBaseFile.h
SdFatConfig.h repair-software-spi 2016-07-31 15:50:42 +02:00
SdFatStructs.h
SdFatUtil.cpp
SdFatUtil.h Cleanup SdFatUtil.h 2016-08-11 12:47:06 -07:00
SdFile.cpp
SdFile.h
SdInfo.h
SdVolume.cpp
SdVolume.h
serial.cpp Relocate serial macros and functions 2017-04-02 01:05:25 -05:00
serial.h Macros to print floats, hiding imprecision 2017-04-09 03:48:40 -05:00
servo.cpp Additional cleanup of UBL code 2017-03-22 20:51:10 -05:00
servo.h Add macros for delays by machine cycle 2017-04-11 09:18:32 -05:00
softspi.h Add software spi support for max6675 2017-04-09 06:44:53 -05:00
speed_lookuptable.h Spacing, cleanup in speed_lookuptable.h 2016-12-19 14:52:45 -08:00
spi.h Add software spi support for max6675 2017-04-09 06:44:53 -05:00
stepper_dac.cpp # This is a combination of 2 commits. 2017-04-06 16:16:27 -05:00
stepper_dac.h Cleanup of code style 2016-10-07 15:57:24 -05:00
stepper_indirection.cpp Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
stepper_indirection.h Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
stepper.cpp Apply const in Stepper::isr 2017-04-13 06:20:36 -05:00
stepper.h First draft of Unified Stepper / E Advance ISR 2016-12-21 01:34:39 -08:00
stopwatch.cpp General comment cleanup 2017-04-08 18:58:33 -05:00
stopwatch.h General comment cleanup 2017-04-08 18:58:33 -05:00
temperature.cpp Make ADC sensor reading frequency adjustable 2017-04-09 22:18:21 -05:00
temperature.h Make ADC sensor reading frequency adjustable 2017-04-09 22:18:21 -05:00
thermistornames.h Add Thermistor 75: MGB18 silicon pad 2017-03-18 11:35:20 -05:00
thermistortable_1.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_2.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_3.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_4.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_5.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_6.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_7.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_8.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_9.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_10.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_11.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_12.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_13.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_20.h Header and pins changes to support 5 extruders 2017-04-07 10:46:36 -05:00
thermistortable_51.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_52.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_55.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_60.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_66.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_70.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_71.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_75.h Add Thermistor 75: MGB18 silicon pad 2017-03-18 11:35:20 -05:00
thermistortable_110.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_147.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_998.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_999.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_1010.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_1047.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortables.h Header and pins changes to support 5 extruders 2017-04-07 10:46:36 -05:00
twibus.cpp General comment cleanup 2017-04-08 18:58:33 -05:00
twibus.h General comment cleanup 2017-04-08 18:58:33 -05:00
types.h Adds types.h 2016-07-30 02:55:52 +01:00
ubl_G29.cpp Toggle with XOR 2017-04-09 07:58:47 -05:00
ubl_motion.cpp UBL's Grid Based Leveling code 2017-04-06 19:55:41 -05:00
ubl.cpp Getting setup for debugging 2017-04-08 14:59:14 -05:00
ubl.h Getting setup for debugging 2017-04-08 14:59:14 -05:00
ultralcd_impl_DOGM.h Apply FIXFLOAT macro 2017-03-31 09:27:48 -05:00
ultralcd_impl_HD44780.h Apply FIXFLOAT macro 2017-03-31 09:27:48 -05:00
ultralcd_st7920_u8glib_rrd.h Add macros for delays by machine cycle 2017-04-11 09:18:32 -05:00
ultralcd.cpp Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
ultralcd.h status_printf => lcd_status_printf_P 2017-04-02 01:05:25 -05:00
utf_mapper.h utf8-mapper for Turkish 2016-12-12 15:56:59 +01:00
utility.cpp Patch a display issue with LCD_DECIMAL_SMALL_XY 2017-04-09 10:25:35 -05:00
utility.h Replace ftostr62sign with ftostr62rj 2016-12-12 20:25:20 +01:00
vector_3.cpp Adjust vector_3 code with const, some optimization 2017-03-23 19:41:42 -05:00
vector_3.h Enable ABL by type, support bilinear on cartesian 2016-09-25 23:35:37 -05:00
Version.h Document PROTOCOL_VERSION 2017-03-05 04:43:46 -06:00
watchdog.cpp Correct comment on watchdog timer 2016-12-19 22:27:28 -08:00
watchdog.h