347 lines
12 KiB
C++
347 lines
12 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* stepper.h - stepper motor driver: executes motion plans of planner.c using the stepper motors
|
|
* Derived from Grbl
|
|
*
|
|
* Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
*
|
|
* Grbl is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* Grbl is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef STEPPER_H
|
|
#define STEPPER_H
|
|
|
|
#include "planner.h"
|
|
#include "speed_lookuptable.h"
|
|
#include "stepper_indirection.h"
|
|
#include "language.h"
|
|
#include "types.h"
|
|
|
|
class Stepper;
|
|
extern Stepper stepper;
|
|
|
|
// intRes = intIn1 * intIn2 >> 16
|
|
// uses:
|
|
// r26 to store 0
|
|
// r27 to store the byte 1 of the 24 bit result
|
|
static FORCE_INLINE uint16_t MultiU16X8toH16(uint8_t charIn1, uint16_t intIn2) {
|
|
register uint8_t tmp;
|
|
register uint16_t intRes;
|
|
__asm__ __volatile__ (
|
|
A("clr %[tmp]")
|
|
A("mul %[charIn1], %B[intIn2]")
|
|
A("movw %A[intRes], r0")
|
|
A("mul %[charIn1], %A[intIn2]")
|
|
A("add %A[intRes], r1")
|
|
A("adc %B[intRes], %[tmp]")
|
|
A("lsr r0")
|
|
A("adc %A[intRes], %[tmp]")
|
|
A("adc %B[intRes], %[tmp]")
|
|
A("clr r1")
|
|
: [intRes] "=&r" (intRes),
|
|
[tmp] "=&r" (tmp)
|
|
: [charIn1] "d" (charIn1),
|
|
[intIn2] "d" (intIn2)
|
|
: "cc"
|
|
);
|
|
return intRes;
|
|
}
|
|
|
|
class Stepper {
|
|
|
|
public:
|
|
|
|
static block_t* current_block; // A pointer to the block currently being traced
|
|
|
|
#if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS)
|
|
static bool performing_homing;
|
|
#endif
|
|
|
|
#if HAS_MOTOR_CURRENT_PWM
|
|
#ifndef PWM_MOTOR_CURRENT
|
|
#define PWM_MOTOR_CURRENT DEFAULT_PWM_MOTOR_CURRENT
|
|
#endif
|
|
static uint32_t motor_current_setting[3];
|
|
#endif
|
|
|
|
private:
|
|
|
|
static uint8_t last_direction_bits, // The next stepping-bits to be output
|
|
last_movement_extruder; // Last movement extruder, as computed when the last movement was fetched from planner
|
|
static bool abort_current_block, // Signals to the stepper that current block should be aborted
|
|
last_movement_non_null[NUM_AXIS]; // Last Movement in the given direction is not null, as computed when the last movement was fetched from planner
|
|
|
|
#if ENABLED(X_DUAL_ENDSTOPS)
|
|
static bool locked_x_motor, locked_x2_motor;
|
|
#endif
|
|
#if ENABLED(Y_DUAL_ENDSTOPS)
|
|
static bool locked_y_motor, locked_y2_motor;
|
|
#endif
|
|
#if ENABLED(Z_DUAL_ENDSTOPS)
|
|
static bool locked_z_motor, locked_z2_motor;
|
|
#endif
|
|
|
|
// Counter variables for the Bresenham line tracer
|
|
static int32_t counter_X, counter_Y, counter_Z, counter_E;
|
|
static uint32_t step_events_completed; // The number of step events executed in the current block
|
|
|
|
#if ENABLED(BEZIER_JERK_CONTROL)
|
|
static int32_t bezier_A, // A coefficient in Bézier speed curve
|
|
bezier_B, // B coefficient in Bézier speed curve
|
|
bezier_C; // C coefficient in Bézier speed curve
|
|
static uint32_t bezier_F, // F coefficient in Bézier speed curve
|
|
bezier_AV; // AV coefficient in Bézier speed curve
|
|
static bool A_negative, // If A coefficient was negative
|
|
bezier_2nd_half; // If Bézier curve has been initialized or not
|
|
#endif
|
|
|
|
static uint32_t nextMainISR; // time remaining for the next Step ISR
|
|
static bool all_steps_done; // all steps done
|
|
|
|
#if ENABLED(LIN_ADVANCE)
|
|
|
|
static uint32_t LA_decelerate_after; // Copy from current executed block. Needed because current_block is set to NULL "too early".
|
|
static uint32_t nextAdvanceISR, eISR_Rate;
|
|
static uint16_t current_adv_steps, final_adv_steps, max_adv_steps; // Copy from current executed block. Needed because current_block is set to NULL "too early".
|
|
static int8_t e_steps;
|
|
static bool use_advance_lead;
|
|
#if E_STEPPERS > 1
|
|
static int8_t LA_active_extruder; // Copy from current executed block. Needed because current_block is set to NULL "too early".
|
|
#else
|
|
static constexpr int8_t LA_active_extruder = 0;
|
|
#endif
|
|
|
|
#endif // LIN_ADVANCE
|
|
|
|
static uint32_t acceleration_time, deceleration_time;
|
|
static uint8_t step_loops, step_loops_nominal;
|
|
|
|
static uint32_t ticks_nominal;
|
|
#if DISABLED(BEZIER_JERK_CONTROL)
|
|
static uint32_t acc_step_rate; // needed for deceleration start point
|
|
#endif
|
|
|
|
static volatile int32_t endstops_trigsteps[XYZ];
|
|
static volatile int32_t endstops_stepsTotal, endstops_stepsDone;
|
|
|
|
//
|
|
// Positions of stepper motors, in step units
|
|
//
|
|
static volatile int32_t count_position[NUM_AXIS];
|
|
|
|
//
|
|
// Current direction of stepper motors (+1 or -1)
|
|
//
|
|
static volatile signed char count_direction[NUM_AXIS];
|
|
|
|
//
|
|
// Mixing extruder mix counters
|
|
//
|
|
#if ENABLED(MIXING_EXTRUDER)
|
|
static int32_t counter_m[MIXING_STEPPERS];
|
|
#define MIXING_STEPPERS_LOOP(VAR) \
|
|
for (uint8_t VAR = 0; VAR < MIXING_STEPPERS; VAR++) \
|
|
if (current_block->mix_event_count[VAR])
|
|
#endif
|
|
|
|
public:
|
|
|
|
//
|
|
// Constructor / initializer
|
|
//
|
|
Stepper() { };
|
|
|
|
// Initialize stepper hardware
|
|
static void init();
|
|
|
|
// Interrupt Service Routines
|
|
|
|
// The ISR scheduler
|
|
static hal_timer_t isr_scheduler();
|
|
|
|
// The stepper pulse phase ISR
|
|
static void stepper_pulse_phase_isr();
|
|
|
|
// The stepper block processing phase ISR
|
|
static uint32_t stepper_block_phase_isr();
|
|
|
|
#if ENABLED(LIN_ADVANCE)
|
|
// The Linear advance stepper ISR
|
|
static uint32_t advance_isr();
|
|
#endif
|
|
|
|
// Get the position of a stepper, in steps
|
|
static int32_t position(const AxisEnum axis);
|
|
|
|
// Report the positions of the steppers, in steps
|
|
static void report_positions();
|
|
|
|
// The stepper subsystem goes to sleep when it runs out of things to execute. Call this
|
|
// to notify the subsystem that it is time to go to work.
|
|
static void wake_up();
|
|
|
|
// Quickly stop all steppers
|
|
FORCE_INLINE static void quick_stop() { abort_current_block = true; }
|
|
|
|
// The direction of a single motor
|
|
FORCE_INLINE static bool motor_direction(const AxisEnum axis) { return TEST(last_direction_bits, axis); }
|
|
|
|
// The last movement direction was not null on the specified axis. Note that motor direction is not necessarily the same.
|
|
FORCE_INLINE static bool movement_non_null(const AxisEnum axis) { return last_movement_non_null[axis]; }
|
|
|
|
// The extruder associated to the last movement
|
|
FORCE_INLINE static uint8_t movement_extruder() { return last_movement_extruder; }
|
|
|
|
// Handle a triggered endstop
|
|
static void endstop_triggered(const AxisEnum axis);
|
|
|
|
// Triggered position of an axis in steps
|
|
static int32_t triggered_position(const AxisEnum axis);
|
|
|
|
#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
|
|
static void digitalPotWrite(const int16_t address, const int16_t value);
|
|
static void digipot_current(const uint8_t driver, const int16_t current);
|
|
#endif
|
|
|
|
#if HAS_MICROSTEPS
|
|
static void microstep_ms(const uint8_t driver, const int8_t ms1, const int8_t ms2);
|
|
static void microstep_mode(const uint8_t driver, const uint8_t stepping);
|
|
static void microstep_readings();
|
|
#endif
|
|
|
|
#if ENABLED(X_DUAL_ENDSTOPS)
|
|
FORCE_INLINE static void set_homing_flag_x(const bool state) { performing_homing = state; }
|
|
FORCE_INLINE static void set_x_lock(const bool state) { locked_x_motor = state; }
|
|
FORCE_INLINE static void set_x2_lock(const bool state) { locked_x2_motor = state; }
|
|
#endif
|
|
#if ENABLED(Y_DUAL_ENDSTOPS)
|
|
FORCE_INLINE static void set_homing_flag_y(const bool state) { performing_homing = state; }
|
|
FORCE_INLINE static void set_y_lock(const bool state) { locked_y_motor = state; }
|
|
FORCE_INLINE static void set_y2_lock(const bool state) { locked_y2_motor = state; }
|
|
#endif
|
|
#if ENABLED(Z_DUAL_ENDSTOPS)
|
|
FORCE_INLINE static void set_homing_flag_z(const bool state) { performing_homing = state; }
|
|
FORCE_INLINE static void set_z_lock(const bool state) { locked_z_motor = state; }
|
|
FORCE_INLINE static void set_z2_lock(const bool state) { locked_z2_motor = state; }
|
|
#endif
|
|
|
|
#if ENABLED(BABYSTEPPING)
|
|
static void babystep(const AxisEnum axis, const bool direction); // perform a short step with a single stepper motor, outside of any convention
|
|
#endif
|
|
|
|
#if HAS_MOTOR_CURRENT_PWM
|
|
static void refresh_motor_power();
|
|
#endif
|
|
|
|
// Set the current position in steps
|
|
inline static void set_position(const int32_t &a, const int32_t &b, const int32_t &c, const int32_t &e) {
|
|
planner.synchronize();
|
|
CRITICAL_SECTION_START;
|
|
_set_position(a, b, c, e);
|
|
CRITICAL_SECTION_END;
|
|
}
|
|
|
|
inline static void set_position(const AxisEnum a, const int32_t &v) {
|
|
planner.synchronize();
|
|
CRITICAL_SECTION_START;
|
|
count_position[a] = v;
|
|
CRITICAL_SECTION_END;
|
|
}
|
|
|
|
private:
|
|
|
|
// Set the current position in steps
|
|
static void _set_position(const int32_t &a, const int32_t &b, const int32_t &c, const int32_t &e);
|
|
|
|
// Set direction bits for all steppers
|
|
static void set_directions();
|
|
|
|
FORCE_INLINE static uint32_t calc_timer_interval(uint32_t step_rate) {
|
|
uint32_t timer;
|
|
|
|
NOMORE(step_rate, uint32_t(MAX_STEP_FREQUENCY));
|
|
|
|
if (step_rate > 20000) { // If steprate > 20kHz >> step 4 times
|
|
step_rate >>= 2;
|
|
step_loops = 4;
|
|
}
|
|
else if (step_rate > 10000) { // If steprate > 10kHz >> step 2 times
|
|
step_rate >>= 1;
|
|
step_loops = 2;
|
|
}
|
|
else {
|
|
step_loops = 1;
|
|
}
|
|
|
|
NOLESS(step_rate, uint32_t(F_CPU / 500000U));
|
|
step_rate -= F_CPU / 500000; // Correct for minimal speed
|
|
if (step_rate >= (8 * 256)) { // higher step rate
|
|
const uint8_t tmp_step_rate = (step_rate & 0x00FF);
|
|
const uint16_t table_address = (uint16_t)&speed_lookuptable_fast[(uint8_t)(step_rate >> 8)][0],
|
|
gain = (uint16_t)pgm_read_word_near(table_address + 2);
|
|
timer = MultiU16X8toH16(tmp_step_rate, gain);
|
|
timer = (uint16_t)pgm_read_word_near(table_address) - timer;
|
|
}
|
|
else { // lower step rates
|
|
uint16_t table_address = (uint16_t)&speed_lookuptable_slow[0][0];
|
|
table_address += ((step_rate) >> 1) & 0xFFFC;
|
|
timer = (uint16_t)pgm_read_word_near(table_address)
|
|
- (((uint16_t)pgm_read_word_near(table_address + 2) * (uint8_t)(step_rate & 0x0007)) >> 3);
|
|
}
|
|
if (timer < 100) { // (20kHz - this should never happen)
|
|
timer = 100;
|
|
SERIAL_ECHOLNPAIR(MSG_STEPPER_TOO_HIGH, step_rate);
|
|
}
|
|
|
|
return timer;
|
|
}
|
|
|
|
#if ENABLED(BEZIER_JERK_CONTROL)
|
|
static void _calc_bezier_curve_coeffs(const int32_t v0, const int32_t v1, const uint32_t av);
|
|
static int32_t _eval_bezier_curve(const uint32_t curr_step);
|
|
#endif
|
|
|
|
#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM
|
|
static void digipot_init();
|
|
#endif
|
|
|
|
#if HAS_MICROSTEPS
|
|
static void microstep_init();
|
|
#endif
|
|
|
|
};
|
|
|
|
#endif // STEPPER_H
|