.. |
example_configurations
|
Patch BQ Hephestos 2 filament diameter
|
2018-01-23 20:38:43 -06:00 |
bitmap_flags.h
|
Parity with 2.0.x bitmap functions
|
2017-11-25 19:56:22 -06:00 |
blinkm.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
blinkm.h
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
boards.h
|
Creality Ender support.
|
2018-01-15 03:39:43 -06:00 |
buzzer.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
cardreader.cpp
|
Fix UBL compilation warnings
|
2018-01-02 19:41:02 -06:00 |
cardreader.h
|
SD Menu patches
|
2017-11-26 01:10:06 -06:00 |
circularqueue.h
|
|
|
Conditionals_LCD.h
|
Adding support for using the MKS_12864OLED with the SSD1306 controller
|
2017-12-16 17:44:34 -06:00 |
Conditionals_post.h
|
[1.1.x] Fix change filament for delta machines (#9296)
|
2018-01-22 10:19:00 -06:00 |
Conditionals.h
|
|
|
Configuration_adv.h
|
Use NEOPIXEL as case light
|
2018-01-20 16:57:04 -06:00 |
configuration_store.cpp
|
Optimize some serial strings
|
2018-01-23 18:59:35 -06:00 |
configuration_store.h
|
UBL G29 works without settings.load
|
2018-01-05 15:47:52 -06:00 |
Configuration.h
|
Better probe boundaries for linear/grid
|
2018-01-22 01:10:34 -06:00 |
dac_mcp4728.cpp
|
Fix get/setDrvPct declarations
|
2017-06-09 20:21:28 -07:00 |
dac_mcp4728.h
|
Fix get/setDrvPct declarations
|
2017-06-09 20:21:28 -07:00 |
digipot_mcp4018.cpp
|
Fix: set digipot mcp4018 Vrefmax to 1.666V
|
2017-06-24 12:35:34 -05:00 |
digipot_mcp4451.cpp
|
Apply maths macros and type changes ahead of HAL
|
2017-06-19 22:57:42 -05:00 |
dogm_bitmaps.h
|
Followup to Ender config
|
2018-01-15 05:48:50 -06:00 |
dogm_font_data_6x9_marlin.h
|
|
|
dogm_font_data_HD44780_C.h
|
|
|
dogm_font_data_HD44780_J.h
|
|
|
dogm_font_data_HD44780_W.h
|
|
|
dogm_font_data_ISO10646_1_PL.h
|
Polish font
|
2017-04-21 21:42:41 -05:00 |
dogm_font_data_ISO10646_1_tr.h
|
|
|
dogm_font_data_ISO10646_1.h
|
Fix non-extended font option
|
2017-11-06 21:43:18 -06:00 |
dogm_font_data_ISO10646_5_Cyrillic.h
|
|
|
dogm_font_data_ISO10646_CN.h
|
|
|
dogm_font_data_ISO10646_CZ.h
|
UTF-8 mapper for Czech
|
2017-07-04 15:51:23 -05:00 |
dogm_font_data_ISO10646_Greek.h
|
|
|
dogm_font_data_ISO10646_Kana.h
|
|
|
dogm_font_data_ISO10646_SK.h
|
Added Slovak C2C3C4 mapper implementation.
|
2017-10-06 14:40:15 -05:00 |
dogm_font_data_Marlin_symbols.h
|
|
|
duration_t.h
|
Fix toDigital length with days
|
2018-01-21 02:50:54 -06:00 |
endstop_interrupts.h
|
General code/bitmaps cleanup
|
2017-12-13 17:57:54 -06:00 |
endstops.cpp
|
Fix DUAL_X_CARRIAGE endstops
|
2018-01-21 16:32:29 +01:00 |
endstops.h
|
Set initial endstops state
|
2017-12-05 01:08:39 -06:00 |
enum.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
fastio_168.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
fastio_644.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
fastio_1280.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
fastio_1281.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
fastio_AT90USB.h
|
Tweaks for M43
|
2017-07-06 21:47:50 -05:00 |
fastio.h
|
Drop fastio timer cruft
|
2017-06-15 14:43:40 -05:00 |
fwretract.cpp
|
Make FWRetract class for 2.0.x parity
|
2018-01-04 17:54:24 -06:00 |
fwretract.h
|
Make FWRetract class for 2.0.x parity
|
2018-01-04 17:54:24 -06:00 |
G26_Mesh_Validation_Tool.cpp
|
Further clean up for serial over run issue during long operations
|
2018-01-18 14:38:18 -06:00 |
gcode.cpp
|
Optimize some serial strings
|
2018-01-23 18:59:35 -06:00 |
gcode.h
|
Add pre-calculated planner.e_factor
|
2017-11-10 20:09:59 -06:00 |
hex_print_routines.cpp
|
New GCode Parser - Implementation
|
2017-05-23 14:15:10 -05:00 |
hex_print_routines.h
|
New GCode Parser - Implementation
|
2017-05-23 14:15:10 -05:00 |
I2CPositionEncoder.cpp
|
Optimize some serial strings
|
2018-01-23 18:59:35 -06:00 |
I2CPositionEncoder.h
|
Updates to TMC support
|
2018-01-10 04:32:49 -06:00 |
language_an.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_bg.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
language_ca.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_cn.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
language_cz_utf8.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_cz.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_da.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_de.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_el-gr.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
language_el.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_en.h
|
Better LCD message when heating needed
|
2018-01-22 05:46:29 -06:00 |
language_es.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_eu.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_fi.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
language_fr_utf8.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_fr.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_gl.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_hr.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_it.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_kana_utf8.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_kana.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_nl.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_pl-DOGM.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_pl-HD44780.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_pl.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
language_pt_utf8.h
|
Fix WELCOME_MSG in PT
|
2017-12-24 18:45:16 -06:00 |
language_pt-br_utf8.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
language_pt-br.h
|
Fix non-extended font option
|
2017-11-06 21:43:18 -06:00 |
language_pt.h
|
Fix WELCOME_MSG in PT
|
2017-12-24 18:42:50 -06:00 |
language_ru.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_sk_utf8.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_test.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
language_tr.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_uk.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_zh_CN.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language_zh_TW.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
language.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
least_squares_fit.cpp
|
Apply coding standards to recent merges
|
2017-07-13 00:46:16 -05:00 |
least_squares_fit.h
|
Apply coding standards to recent merges
|
2017-07-13 00:46:16 -05:00 |
leds.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
leds.h
|
Use NEOPIXEL as case light
|
2018-01-20 16:57:04 -06:00 |
M100_Free_Mem_Chk.cpp
|
Apply const, spacing, etc.
|
2017-06-27 05:23:49 -05:00 |
macros.h
|
Update macros for parity with 2.0.x
|
2017-11-10 04:32:27 -06:00 |
Makefile
|
Creality Ender support.
|
2018-01-15 03:39:43 -06:00 |
Marlin_main.cpp
|
Optimize some serial strings
|
2018-01-23 18:59:35 -06:00 |
Marlin.h
|
Updates to TMC support
|
2018-01-10 04:32:49 -06:00 |
Marlin.ino
|
TMC2130 Library: @teemuatlut replaces @makertum
|
2017-03-07 04:22:06 -06:00 |
MarlinConfig.h
|
Updates to TMC support
|
2018-01-10 04:32:49 -06:00 |
MarlinSerial.cpp
|
Better handle serial over runs...
|
2018-01-18 16:51:27 -06:00 |
MarlinSerial.h
|
Remove redundant serial sanity check
|
2017-12-19 19:07:20 -06:00 |
MarlinSPI.h
|
Fix PlatformIO dependencies
|
2017-11-16 15:16:21 -06:00 |
Max7219_Debug_LEDs.cpp
|
Apply coding standards to Max7219 code
|
2017-11-17 15:33:55 -06:00 |
Max7219_Debug_LEDs.h
|
Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104)
|
2017-10-26 11:44:55 -05:00 |
mesh_bed_leveling.cpp
|
Make mbl.has_mesh() a method
|
2018-01-07 18:14:37 -06:00 |
mesh_bed_leveling.h
|
Make mbl.has_mesh() a method
|
2018-01-07 18:14:37 -06:00 |
neopixel.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
neopixel.h
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
nozzle.cpp
|
[1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8864)
|
2017-12-24 23:47:05 -06:00 |
nozzle.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
pca9632.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
pca9632.h
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
pins_3DRAG.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_5DPRINT.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
pins_ANET_10.h
|
Adding support for the Tronxy and Zonestar LCD
|
2017-12-15 19:13:31 -06:00 |
pins_AZTEEG_X1.h
|
Tweak Sanguinololu-related pins files
|
2017-08-23 18:32:59 -05:00 |
pins_AZTEEG_X3_PRO.h
|
Unify AVR90USB: Pins cleanup
|
2017-06-09 18:48:12 -05:00 |
pins_AZTEEG_X3.h
|
Apply some tweaks based on 2.0.x
|
2017-10-09 17:39:03 -05:00 |
pins_BAM_DICE_DUE.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_BQ_ZUM_MEGA_3D.h
|
Add support for BQ heated bed kit with Hephestos 2
|
2017-07-07 03:10:38 -05:00 |
pins_BRAINWAVE_PRO.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
pins_BRAINWAVE.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
pins_CHEAPTRONIC.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
pins_CHEAPTRONICv2.h
|
Whitespace cleanup
|
2018-01-05 10:19:15 -06:00 |
pins_CNCONTROLS_11.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
pins_CNCONTROLS_12.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
pins_CREALITY_ENDER.h
|
Creality Ender support.
|
2018-01-15 03:39:43 -06:00 |
pins_ELEFU_3.h
|
|
|
pins_FELIX2.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_GEN3_MONOLITHIC.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_GEN3_PLUS.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_GEN6_DELUXE.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_GEN6.h
|
Minor patches to pins files
|
2017-08-23 18:32:59 -05:00 |
pins_GEN7_12.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_GEN7_13.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_GEN7_14.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_GEN7_CUSTOM.h
|
Unify AVR90USB: Pins cleanup
|
2017-06-09 18:48:12 -05:00 |
pins_GT2560_REV_A_PLUS.h
|
Fix GT2560 A+ servo pins
|
2017-12-25 02:20:13 -06:00 |
pins_GT2560_REV_A.h
|
Fix GT2560 A+ servo pins
|
2017-12-25 02:20:13 -06:00 |
pins_K8200.h
|
|
|
pins_K8400.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_LEAPFROG.h
|
|
|
pins_MAKEBOARD_MINI.h
|
Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041)
|
2017-10-21 00:24:22 -05:00 |
pins_MEGACONTROLLER.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_MEGATRONICS_2.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
pins_MEGATRONICS_3.h
|
Use MB() for Megatronics 3.1
|
2017-12-08 23:39:47 -06:00 |
pins_MEGATRONICS.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
pins_MELZI_CREALITY.h
|
Whitespace clean
|
2017-12-06 16:19:49 -06:00 |
pins_MELZI_MAKR3D.h
|
Tweak Sanguinololu-related pins files
|
2017-08-23 18:32:59 -05:00 |
pins_MELZI_MALYAN.h
|
[1.1.x] Fix support for Malyan M150 (#9146)
|
2018-01-12 01:14:07 -06:00 |
pins_MELZI.h
|
Tweak Sanguinololu-related pins files
|
2017-08-23 18:32:59 -05:00 |
pins_MIGHTYBOARD_REVE.h
|
Fix TEMP_BED_PIN for Mightyboard Rev.E
|
2017-12-07 21:52:43 -06:00 |
pins_MINIRAMBO.h
|
Board definition and PIN assignments for Mini RAMBo1.0a
|
2017-12-08 23:41:34 -06:00 |
pins_MINITRONICS.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
pins_MKS_13.h
|
MKS 1.3+: Add pin mapping for PS_ON
|
2017-07-21 18:50:05 -05:00 |
pins_MKS_BASE.h
|
Whitespace cleanup
|
2018-01-05 10:19:15 -06:00 |
pins_MKS_GEN_L.h
|
Added MKS GEN L board (#8088)
|
2017-10-27 02:13:41 -05:00 |
pins_OMCA_A.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_OMCA.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_PRINTRBOARD_REVF.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
pins_PRINTRBOARD.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
pins_RAMBO.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
pins_RAMPS_13.h
|
|
|
pins_RAMPS_OLD.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_RAMPS_PLUS.h
|
Adding support for using the MKS_12864OLED with the SSD1306 controller
|
2017-12-16 17:44:34 -06:00 |
pins_RAMPS.h
|
Allow FIL_RUNOUT_PIN override on RAMPS-based boards
|
2018-01-20 12:00:03 -06:00 |
pins_RIGIDBOARD_V2.h
|
Need to define this for Rigidboard V2
|
2017-04-30 19:04:27 -05:00 |
pins_RIGIDBOARD.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
pins_RUMBA.h
|
Pins-related cleanup, formatting
|
2017-05-21 07:18:03 -05:00 |
pins_SAINSMART_2IN1.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
pins_SANGUINOLOLU_11.h
|
Creality Ender support.
|
2018-01-15 03:39:43 -06:00 |
pins_SANGUINOLOLU_12.h
|
Tweak Sanguinololu-related pins files
|
2017-08-23 18:32:59 -05:00 |
pins_SAV_MKI.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
pins_SCOOVO_X9H.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
pins_SETHI.h
|
Formatting adjustments
|
2017-06-15 15:25:24 -05:00 |
pins_SILVER_GATE.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
pins_STB_11.h
|
Tweak Sanguinololu-related pins files
|
2017-08-23 18:32:59 -05:00 |
pins_TEENSY2.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
pins_TEENSYLU.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
pins_ULTIMAIN_2.h
|
Edit digipot currents via LCD, save to EEPROM
|
2017-06-25 01:02:36 -05:00 |
pins_ULTIMAKER_OLD.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
pins_ULTIMAKER.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
pins_ZRIB_V20.h
|
Support for ZRIB v2.0 Control Board
|
2017-06-02 12:05:46 -05:00 |
pins.h
|
Update pins.h for parity, protect MS pins
|
2018-01-22 02:19:04 -06:00 |
pinsDebug_list.h
|
Update pins.h for parity, protect MS pins
|
2018-01-22 02:19:04 -06:00 |
pinsDebug_plus_70.h
|
Support for SilverGate Board
|
2017-10-31 15:26:27 -05:00 |
pinsDebug_Teensyduino.h
|
Unify AVR90USB: pinsDebug changes
|
2017-06-09 19:20:16 -05:00 |
pinsDebug.h
|
Support for SilverGate Board
|
2017-10-31 15:26:27 -05:00 |
planner_bezier.cpp
|
Tweaks to cubic_b_sline code style
|
2017-11-04 22:00:45 -05:00 |
planner_bezier.h
|
|
|
planner.cpp
|
Lightly optimize arc length calculation
|
2018-01-23 18:59:35 -06:00 |
planner.h
|
Cleanup spacing, commentary
|
2018-01-11 18:52:54 -06:00 |
point_t.h
|
Cleanup Nozzle class, fix XY vs Z move order
|
2017-11-05 18:14:18 -06:00 |
printcounter.cpp
|
Optimize some serial strings
|
2018-01-23 18:59:35 -06:00 |
printcounter.h
|
Cosmetic patches
|
2017-04-26 06:24:23 -05:00 |
SanityCheck.h
|
Added missing SoftwareSerial begin for TMC2208
|
2018-01-22 10:49:40 -06:00 |
Sd2Card.cpp
|
Save some program memory
|
2018-01-13 09:46:54 +01:00 |
Sd2Card.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
SdBaseFile.cpp
|
Tweak readDir code
|
2017-11-26 18:23:34 -06:00 |
SdBaseFile.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
SdFatConfig.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
SdFatStructs.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
SdFatUtil.cpp
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
SdFatUtil.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
SdFile.cpp
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
SdFile.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
SdInfo.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
SdVolume.cpp
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
SdVolume.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
serial.cpp
|
Add proportional font adjustment ratio
|
2017-05-10 17:19:03 -04:00 |
serial.h
|
Updates to TMC support
|
2018-01-10 04:32:49 -06:00 |
servo.cpp
|
Implement SERVO_DELAY as array
|
2017-08-15 00:28:47 -05:00 |
servo.h
|
Add macros for delays by machine cycle
|
2017-04-11 09:18:32 -05:00 |
softspi.h
|
Fix hexadecimal number formatting
|
2017-08-14 22:50:44 -05:00 |
speed_lookuptable.h
|
Minimal include for speed_lookuptable
|
2017-12-05 21:44:59 -06:00 |
stepper_dac.cpp
|
Apply const to axis args
|
2017-12-11 00:20:29 -06:00 |
stepper_dac.h
|
Apply const to axis args
|
2017-12-11 00:20:29 -06:00 |
stepper_indirection.cpp
|
Followup patch for TMC stepper init
|
2018-01-23 13:58:36 -06:00 |
stepper_indirection.h
|
[1.1.x] TMC driver update (#8712)
|
2017-12-15 15:02:39 -06:00 |
stepper.cpp
|
Minor bugfix to the code that enables the 2nd X stepper. It needs to be enabled for X_DUAL_STEPPER_DRIVERS. (#9286)
|
2018-01-22 01:32:09 -06:00 |
stepper.h
|
Revert "[Bugfix-1.1.x] initial step correction (#8735)"
|
2017-12-17 02:04:44 -06:00 |
stopwatch.cpp
|
General comment cleanup
|
2017-04-08 18:58:33 -05:00 |
stopwatch.h
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
temperature.cpp
|
Use delay() in serial temp report
|
2018-01-20 14:12:30 -06:00 |
temperature.h
|
Add hotEnough methods
|
2018-01-22 05:46:19 -06:00 |
thermistornames.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_1.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_2.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_3.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_4.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_5.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_6.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_7.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_8.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_9.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_10.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_11.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_12.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_13.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_15.h
|
Add thermistor 15 tuned for JGAurora A5
|
2018-01-21 16:57:47 -06:00 |
thermistortable_20.h
|
Add OV() macro for thermistor tables
|
2017-11-15 03:20:36 -06:00 |
thermistortable_51.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_52.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_55.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_60.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_66.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_70.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_71.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_75.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
thermistortable_110.h
|
|
|
thermistortable_147.h
|
|
|
thermistortable_998.h
|
Add OV() macro for thermistor tables
|
2017-11-15 03:20:36 -06:00 |
thermistortable_999.h
|
Add OV() macro for thermistor tables
|
2017-11-15 03:20:36 -06:00 |
thermistortable_1010.h
|
|
|
thermistortable_1047.h
|
|
|
thermistortables.h
|
Add thermistor 15 tuned for JGAurora A5
|
2018-01-21 16:57:47 -06:00 |
tmc_util.cpp
|
Updates to TMC support
|
2018-01-10 04:32:49 -06:00 |
tmc_util.h
|
Updates to TMC support
|
2018-01-10 04:32:49 -06:00 |
twibus.cpp
|
Patch some serial macros
|
2017-06-09 17:17:23 -05:00 |
twibus.h
|
Clean up some trailing spaces
|
2017-07-01 22:32:20 -05:00 |
types.h
|
Make G26 work with all mesh leveling.
|
2017-11-23 21:41:27 -06:00 |
ubl_G29.cpp
|
PronterFace M105 work around (#9227)
|
2018-01-17 22:51:19 -06:00 |
ubl_motion.cpp
|
Comment return false in motion functions
|
2017-12-24 22:56:56 -06:00 |
ubl.cpp
|
UBL devel debugging flag
|
2017-12-11 00:20:29 -06:00 |
ubl.h
|
PronterFace M105 work around (#9227)
|
2018-01-17 22:51:19 -06:00 |
ultralcd_impl_DOGM.h
|
Add a heating indicator X offset
|
2018-01-21 01:58:40 -06:00 |
ultralcd_impl_HD44780.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
ultralcd_st7565_u8glib_VIKI.h
|
Support for SilverGate Board
|
2017-10-31 15:26:27 -05:00 |
ultralcd_st7920_u8glib_rrd.h
|
Support for SilverGate Board
|
2017-10-31 15:26:27 -05:00 |
ultralcd.cpp
|
Add hotEnough methods
|
2018-01-22 05:46:19 -06:00 |
ultralcd.h
|
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213)
|
2018-01-17 00:27:50 -06:00 |
utf_mapper.h
|
Tweak spacing in utf8_mapper.h
|
2017-10-06 15:11:27 -05:00 |
utility.cpp
|
convert DAC percent to uint8_t
|
2017-06-19 17:46:41 -05:00 |
utility.h
|
Updates for G33-LCD interface
|
2017-07-07 05:00:59 -05:00 |
vector_3.cpp
|
Add a struct defining EEPROM storage
|
2018-01-05 15:47:51 -06:00 |
vector_3.h
|
Add a struct defining EEPROM storage
|
2018-01-05 15:47:51 -06:00 |
Version.h
|
Date refresh
|
2018-01-20 09:17:00 -06:00 |
watchdog.cpp
|
Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR
|
2017-11-03 04:45:13 +01:00 |
watchdog.h
|
|
|