39b3e4c501
* Support for multiple Max7219 units in a chain I'll move this support over to bugfix_2.0.0 in the next few days. And then look at updating the Max7219_idle() routine to make use of multiple units in a chain. * spelling correction
148 lines
6.9 KiB
C
148 lines
6.9 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* This module is off by default, but can be enabled to facilitate the display of
|
|
* extra debug information during code development.
|
|
*
|
|
* Just connect up 5V and GND to give it power, then connect up the pins assigned
|
|
* in Configuration_adv.h. For example, on the Re-ARM you could use:
|
|
*
|
|
* #define MAX7219_CLK_PIN 77
|
|
* #define MAX7219_DIN_PIN 78
|
|
* #define MAX7219_LOAD_PIN 79
|
|
*
|
|
* Max7219_init() is called automatically at startup, and then there are a number of
|
|
* support functions available to control the LEDs in the 8x8 grid.
|
|
*
|
|
* If you are using the Max7219 matrix for firmware debug purposes in time sensitive
|
|
* areas of the code, please be aware that the orientation (rotation) of the display can
|
|
* affect the speed. The Max7219 can update a single column fairly fast. It is much
|
|
* faster to do a Max7219_Set_Column() with a rotation of 90 or 270 degrees than to do
|
|
* a Max7219_Set_Row(). The opposite is true for rotations of 0 or 180 degrees.
|
|
*/
|
|
|
|
#ifndef __MAX7219_DEBUG_LEDS_H__
|
|
#define __MAX7219_DEBUG_LEDS_H__
|
|
|
|
//
|
|
// MAX7219 registers
|
|
//
|
|
#define max7219_reg_noop 0x00
|
|
#define max7219_reg_digit0 0x01
|
|
#define max7219_reg_digit1 0x02
|
|
#define max7219_reg_digit2 0x03
|
|
#define max7219_reg_digit3 0x04
|
|
#define max7219_reg_digit4 0x05
|
|
#define max7219_reg_digit5 0x06
|
|
#define max7219_reg_digit6 0x07
|
|
#define max7219_reg_digit7 0x08
|
|
|
|
#define max7219_reg_decodeMode 0x09
|
|
#define max7219_reg_intensity 0x0A
|
|
#define max7219_reg_scanLimit 0x0B
|
|
#define max7219_reg_shutdown 0x0C
|
|
#define max7219_reg_displayTest 0x0F
|
|
|
|
void Max7219_init();
|
|
void Max7219_PutByte(uint8_t data);
|
|
void Max7219_pulse_load();
|
|
|
|
// Set a single register (e.g., a whole native row)
|
|
void Max7219(const uint8_t reg, const uint8_t data);
|
|
|
|
// Set a single LED by XY coordinate
|
|
void Max7219_LED_Set(const uint8_t x, const uint8_t y, const bool on);
|
|
void Max7219_LED_On(const uint8_t x, const uint8_t y);
|
|
void Max7219_LED_Off(const uint8_t x, const uint8_t y);
|
|
void Max7219_LED_Toggle(const uint8_t x, const uint8_t y);
|
|
|
|
// Set all LEDs in a single column
|
|
void Max7219_Set_Column(const uint8_t col, const uint32_t val);
|
|
void Max7219_Clear_Column(const uint8_t col);
|
|
|
|
// Set all LEDs in a single row
|
|
void Max7219_Set_Row(const uint8_t row, const uint32_t val);
|
|
void Max7219_Clear_Row(const uint8_t row);
|
|
|
|
// 16 and 32 bit versions of Row and Column functions
|
|
// Multiple rows and columns will be used to display the value if
|
|
// the array of matrix LED's is too narrow to accomplish the goal
|
|
void Max7219_Set_Rows_16bits(const uint8_t y, uint32_t val);
|
|
void Max7219_Set_Rows_32bits(const uint8_t y, uint32_t val);
|
|
void Max7219_Set_Columns_16bits(const uint8_t x, uint32_t val);
|
|
void Max7219_Set_Columns_32bits(const uint8_t x, uint32_t val);
|
|
|
|
// Quickly clear the whole matrix
|
|
void Max7219_Clear();
|
|
|
|
// Apply custom code to update the matrix
|
|
void Max7219_idle_tasks();
|
|
|
|
#ifndef MAX7219_ROTATE
|
|
#define MAX7219_ROTATE 0
|
|
#endif
|
|
#define _ROT ((MAX7219_ROTATE + 360) % 360)
|
|
#if _ROT == 0
|
|
#define MAX7219_UPDATE_AXIS y // Fast line update axis for this orientation of the matrix display
|
|
#define MAX7219_X_LEDS (8 * MAX7219_NUMBER_UNITS)
|
|
#define MAX7219_Y_LEDS 8
|
|
#define XOR_7219(x, y) LEDs[y + (x >> 3) * 8] ^= _BV(7 - (x & 0x07))
|
|
#define SET_PIXEL_7219(x, y) LEDs[y + (x >> 3) * 8] |= _BV(7 - (x & 0x07))
|
|
#define CLEAR_PIXEL_7219(x, y) LEDs[y + (x >> 3) * 8] &= (_BV(7 - (x & 0x07)) ^ 0xff)
|
|
#define BIT_7219(x, y) TEST(LEDs[y + (x >> 3) * 8], 7 - (x & 0x07))
|
|
#define SEND_7219(R) do {for(int8_t jj = 0; jj < MAX7219_NUMBER_UNITS; jj++) Max7219(max7219_reg_digit0 + (R & 0x7), LEDs[(R & 0x7) + jj * 8]); Max7219_pulse_load(); } while (0);
|
|
#elif _ROT == 90
|
|
#define MAX7219_UPDATE_AXIS x // Fast line update axis for this orientation of the matrix display
|
|
#define MAX7219_X_LEDS 8
|
|
#define MAX7219_Y_LEDS (8 * MAX7219_NUMBER_UNITS)
|
|
#define XOR_7219(x, y) LEDs[x + (((MAX7219_Y_LEDS - 1 - y) >> 3) * 8)] ^= _BV((y & 0x7))
|
|
#define SET_PIXEL_7219(x, y) LEDs[x + (((MAX7219_Y_LEDS - 1 - y) >> 3) * 8)] |= _BV((y & 0x7))
|
|
#define CLEAR_PIXEL_7219(x, y) LEDs[x + (((MAX7219_Y_LEDS - 1 - y) >> 3) * 8)] &= (_BV((y & 0x7)) ^ 0xff)
|
|
#define BIT_7219(x, y) TEST(LEDs[x + (((MAX7219_Y_LEDS - 1 - y) >> 3) * 8)], (y & 0x7))
|
|
#define SEND_7219(R) do {for(int8_t jj = 0; jj < MAX7219_NUMBER_UNITS; jj++) Max7219(max7219_reg_digit0 + (R & 0x7), LEDs[(R & 0x7) + jj * 8]); Max7219_pulse_load(); } while (0);
|
|
#elif _ROT == 180
|
|
#define MAX7219_UPDATE_AXIS y // Fast line update axis for this orientation of the matrix display
|
|
#define MAX7219_X_LEDS (8 * MAX7219_NUMBER_UNITS)
|
|
#define MAX7219_Y_LEDS 8
|
|
#define XOR_7219(x, y) LEDs[y + ((MAX7219_X_LEDS - 1 - x) >> 3) * 8] ^= _BV((x & 0x07))
|
|
#define SET_PIXEL_7219(x, y) LEDs[y + ((MAX7219_X_LEDS - 1 - x) >> 3) * 8] |= _BV((x & 0x07))
|
|
#define CLEAR_PIXEL_7219(x, y) LEDs[y + ((MAX7219_X_LEDS - 1 - x) >> 3) * 8] &= (_BV((x & 0x07)) ^ 0xff)
|
|
#define BIT_7219(x, y) TEST(LEDs[y + ((MAX7219_X_LEDS - 1 - x) >> 3) * 8], ((x & 0x07)))
|
|
#define SEND_7219(R) do {for(int8_t jj = 0; jj < MAX7219_NUMBER_UNITS; jj++) Max7219(max7219_reg_digit7 - (R & 0x7), LEDs[(R & 0x7) + jj * 8]); Max7219_pulse_load(); } while (0);
|
|
#elif _ROT == 270
|
|
#define MAX7219_UPDATE_AXIS x // Fast line update axis for this orientation of the matrix display
|
|
#define MAX7219_X_LEDS 8
|
|
#define MAX7219_Y_LEDS (8 * MAX7219_NUMBER_UNITS)
|
|
#define XOR_7219(x, y) LEDs[x + (y >> 3) * 8] ^= _BV(7 - (y & 0x7))
|
|
#define SET_PIXEL_7219(x, y) LEDs[x + (y >> 3) * 8] |= _BV(7 - (y & 0x7))
|
|
#define CLEAR_PIXEL_7219(x, y) LEDs[x + (y >> 3) * 8] &= (_BV(7 - (y & 0x7)) ^ 0xff)
|
|
#define BIT_7219(x, y) TEST(LEDs[x + ( y >> 3) * 8], 7 - (y & 0x7))
|
|
#define SEND_7219(R) do {for(int8_t jj = 0; jj < MAX7219_NUMBER_UNITS; jj++) Max7219(max7219_reg_digit7 - (R & 0x7), LEDs[(R & 0x7) + jj * 8]); Max7219_pulse_load(); } while (0);
|
|
#else
|
|
#error "MAX7219_ROTATE must be a multiple of +/- 90°."
|
|
#endif
|
|
|
|
extern uint8_t LEDs[8*MAX7219_NUMBER_UNITS];
|
|
|
|
#endif // __MAX7219_DEBUG_LEDS_H__
|