Firmware/Marlin/language_bg.h
2016-03-24 18:01:20 +00:00

160 lines
8.9 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Bulgarian
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_BG_H
#define LANGUAGE_BG_H
#define MAPPER_D0D1 // For Cyrillic
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_5
#define WELCOME_MSG MACHINE_NAME " Готов."
#define MSG_SD_INSERTED "Картата е поставена"
#define MSG_SD_REMOVED "Картата е извадена"
#define MSG_MAIN "Меню"
#define MSG_AUTOSTART "Автостарт"
#define MSG_DISABLE_STEPPERS "Изкл. двигатели"
#define MSG_AUTO_HOME "Паркиране"
#define MSG_LEVEL_BED_HOMING "Homing"
#define MSG_SET_HOME_OFFSETS "Задай Начало"
#define MSG_SET_ORIGIN "Изходна точка"
#define MSG_PREHEAT_PLA "Подгряване PLA"
#define MSG_PREHEAT_PLA_N "Подгряване PLA"
#define MSG_PREHEAT_PLA_ALL "Подгр. PLA Всички"
#define MSG_PREHEAT_PLA_BEDONLY "Подгр. PLA Легло"
#define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA"
#define MSG_PREHEAT_ABS "Подгряване ABS"
#define MSG_PREHEAT_ABS_N "Подгряване ABS"
#define MSG_PREHEAT_ABS_ALL "Подгр. ABS Всички"
#define MSG_PREHEAT_ABS_BEDONLY "Подгр. ABS Легло"
#define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS"
#define MSG_COOLDOWN "Охлаждане"
#define MSG_SWITCH_PS_ON "Вкл. захранване"
#define MSG_SWITCH_PS_OFF "Изкл. захранване"
#define MSG_EXTRUDE "Екструзия"
#define MSG_RETRACT "Откат"
#define MSG_MOVE_AXIS "Движение по ос"
#define MSG_MOVE_X "Движение по X"
#define MSG_MOVE_Y "Движение по Y"
#define MSG_MOVE_Z "Движение по Z"
#define MSG_MOVE_E "Екструдер"
#define MSG_MOVE_01MM "Премести с 0.1mm"
#define MSG_MOVE_1MM "Премести с 1mm"
#define MSG_MOVE_10MM "Премести с 10mm"
#define MSG_LEVEL_BED "Нивелиране"
#define MSG_SPEED "Скорост"
#define MSG_NOZZLE LCD_STR_THERMOMETER " Дюза"
#define MSG_BED LCD_STR_THERMOMETER " Легло"
#define MSG_FAN_SPEED "Вентилатор"
#define MSG_FLOW "Поток"
#define MSG_CONTROL "Управление"
#define MSG_MIN LCD_STR_THERMOMETER " Минимум"
#define MSG_MAX LCD_STR_THERMOMETER " Максимум"
#define MSG_FACTOR LCD_STR_THERMOMETER " Фактор"
#define MSG_AUTOTEMP "Авто-темп."
#define MSG_ON "Вкл. "
#define MSG_OFF "Изкл. "
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Acc"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-откат"
#define MSG_XSTEPS "X стъпки/mm"
#define MSG_YSTEPS "Y стъпки/mm"
#define MSG_ZSTEPS "Z стъпки/mm"
#define MSG_ESTEPS "E стъпки/mm"
#define MSG_TEMPERATURE "Температура"
#define MSG_MOTION "Движение"
#define MSG_VOLUMETRIC "Нишка"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_DIAM "Диам. нишка"
#define MSG_CONTRAST "LCD контраст"
#define MSG_STORE_EPROM "Запази в EPROM"
#define MSG_LOAD_EPROM "Зареди от EPROM"
#define MSG_RESTORE_FAILSAFE "Фабрични настройки"
#define MSG_REFRESH LCD_STR_REFRESH "Обнови"
#define MSG_WATCH "Преглед"
#define MSG_PREPARE "Действия"
#define MSG_TUNE "Настройка"
#define MSG_PAUSE_PRINT "Пауза"
#define MSG_RESUME_PRINT "Възобнови печата"
#define MSG_STOP_PRINT "Спри печата"
#define MSG_CARD_MENU "Меню карта"
#define MSG_NO_CARD "Няма карта"
#define MSG_DWELL "Почивка..."
#define MSG_USERWAIT "Изчакване"
#define MSG_RESUMING "Продълж. печата"
#define MSG_PRINT_ABORTED "Печатът е прекъснат"
#define MSG_NO_MOVE "Няма движение"
#define MSG_KILLED "УБИТО."
#define MSG_STOPPED "СПРЯНО."
#define MSG_CONTROL_RETRACT "Откат mm"
#define MSG_CONTROL_RETRACT_SWAP "Смяна Откат mm"
#define MSG_CONTROL_RETRACTF "Откат V"
#define MSG_CONTROL_RETRACT_ZLIFT "Скок mm"
#define MSG_CONTROL_RETRACT_RECOVER "Възврат +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Смяна Възврат +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "Възврат V"
#define MSG_AUTORETRACT "Автоoткат"
#define MSG_FILAMENTCHANGE "Смяна нишка"
#define MSG_INIT_SDCARD "Иниц. SD-Карта"
#define MSG_CNG_SDCARD "Смяна SD-Карта"
#define MSG_ZPROBE_OUT "Z-сондата е извадена"
#define MSG_POSITION_UNKNOWN "Задайте X/Y преди Z"
#define MSG_ZPROBE_ZOFFSET "Z Отстояние"
#define MSG_BABYSTEP_X "Министъпка X"
#define MSG_BABYSTEP_Y "Министъпка Y"
#define MSG_BABYSTEP_Z "Министъпка Z"
#define MSG_ENDSTOP_ABORT "Стоп Кр.Изключватели"
#define MSG_END_HOUR "часа"
#define MSG_END_MINUTE "минути"
#if ENABLED(DELTA_CALIBRATION_MENU)
#define MSG_DELTA_CALIBRATE "Делта Калибровка"
#define MSG_DELTA_CALIBRATE_X "Калибровка X"
#define MSG_DELTA_CALIBRATE_Y "Калибровка Y"
#define MSG_DELTA_CALIBRATE_Z "Калибровка Z"
#define MSG_DELTA_CALIBRATE_CENTER "Калибровка Център"
#endif // DELTA_CALIBRATION_MENU
#endif // LANGUAGE_BG_H