Firmware/Marlin
2012-12-10 12:02:29 +01:00
..
cardreader.cpp Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
cardreader.h Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
Configuration_adv.h Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up. 2012-12-06 10:36:07 +01:00
Configuration.h Add support for Printrboard (from https://github.com/lincomatic/Marlin) and Brainwave (from https://github.com/metrix/Sprinter). 2012-12-08 10:49:01 -08:00
ConfigurationStore.cpp Fixed #317 2012-11-24 17:32:30 +01:00
ConfigurationStore.h Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
COPYING first commit 2011-08-12 22:28:35 +02:00
create_speed_lookuptable.py Added 20MHz support. 2012-03-11 12:25:04 +01:00
createTemperatureLookupMarlin.py Added new temperature lookup table creation tool. This one uses stein hart-hart equations. 2012-11-16 23:51:05 +01:00
fastio.h Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7. 2012-12-08 15:16:38 -08:00
language.h I hope last changes to french translation 2012-11-18 22:34:56 +01:00
LCD Menu Tree.pdf Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included. 2012-08-29 21:08:41 +01:00
LiquidCrystalRus.cpp First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions. 2012-11-06 12:06:41 +01:00
LiquidCrystalRus.h Enables support the Cyrillic alphabet for LCD 2012-10-12 19:06:43 +04:00
Makefile Add printrboard and brainwave to Makefile. 2012-12-09 23:30:55 +01:00
Marlin_main.cpp The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message. 2012-12-05 19:32:02 +01:00
Marlin.h AT90USB is only defined after pins.h is included. 2012-12-09 01:40:33 -08:00
Marlin.pde Mistake there, not sure why I did that. My bad. 2012-12-05 20:23:13 +01:00
MarlinSerial.cpp Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well. 2012-12-09 01:32:09 -08:00
MarlinSerial.h Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well. 2012-12-09 01:32:09 -08:00
Menu Plans.xlsx Tidy up 2012-08-29 22:53:41 +01:00
motion_control.cpp software_endstops: use *_MIN_POS and *_MAX_POS for arcs 2012-08-10 19:36:30 +01:00
motion_control.h Removed interrupt nesting in the stepper ISR. 2011-11-27 21:12:55 +01:00
pins.h Teensylu and Printrboard use different analog pins for thermistors. 2012-12-09 02:19:13 -08:00
planner.cpp Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
planner.h Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer. 2012-05-09 08:05:13 +03:00
Sd2Card.cpp Fix for a few -Wextra warnings. 2012-11-12 15:35:28 +01:00
Sd2Card.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
Sd2PinMap.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdBaseFile.cpp Few simple fixes that save RAM, as static strings are stored in RAM by default. 2012-11-28 10:30:34 +01:00
SdBaseFile.h Added long filename support. 2012-08-22 14:49:57 +02:00
SdFatConfig.h Added long filename support. 2012-08-22 14:49:57 +02:00
SdFatStructs.h Added long filename support. 2012-08-22 14:49:57 +02:00
SdFatUtil.cpp Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0. 2012-02-11 16:02:47 +01:00
SdFatUtil.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdFile.cpp First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions. 2012-11-06 12:06:41 +01:00
SdFile.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdInfo.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdVolume.cpp made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdVolume.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
speed_lookuptable.h Made the 2nd speed lookup table condition more explicit. 2012-11-11 12:02:48 +01:00
stepper.cpp Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-12-09 23:46:42 +01:00
stepper.h Few simple fixes that save RAM, as static strings are stored in RAM by default. 2012-11-28 10:30:34 +01:00
temperature.cpp Add MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder. 2012-12-10 10:48:46 +01:00
temperature.h Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 2012-12-09 23:00:06 +01:00
thermistortables.h Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 2012-12-09 23:00:06 +01:00
ultralcd.cpp Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
ultralcd.h Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
watchdog.cpp Fix compiling the watchdog error message when the manual reset watchdog is used. 2012-12-06 10:27:50 +01:00
watchdog.h First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions. 2012-11-06 12:06:41 +01:00
wiring.h add wiring.h, that can be used to overwrite: 2011-12-22 14:57:28 +01:00