Firmware/Marlin/language_nl.h
2016-12-10 21:59:45 -08:00

262 lines
14 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Dutch
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_NL_H
#define LANGUAGE_NL_H
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " gereed."
#define MSG_SD_INSERTED "Kaart ingestoken"
#define MSG_SD_REMOVED "Kaart verwijderd"
#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters
#define MSG_MAIN "Hoofdmenu"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Motoren uit"
#define MSG_AUTO_HOME "Auto home"
#define MSG_AUTO_HOME_X "Home X"
#define MSG_AUTO_HOME_Y "Home Y"
#define MSG_AUTO_HOME_Z "Home Z"
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
#define MSG_LEVEL_BED_WAITING "Klik voor begin"
#define MSG_LEVEL_BED_NEXT_POINT "Volgende Plaats"
#define MSG_LEVEL_BED_DONE "Bed level kompl."
#define MSG_LEVEL_BED_CANCEL "Bed level afbr."
#define MSG_SET_HOME_OFFSETS "Zet home offsets"
#define MSG_HOME_OFFSETS_APPLIED "H offset toegep."
#define MSG_SET_ORIGIN "Nulpunt instellen"
#define MSG_PREHEAT_1 "PLA voorverwarmen"
#define MSG_PREHEAT_1_N "PLA voorverw. "
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N "aan"
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N "Bed"
#define MSG_PREHEAT_1_SETTINGS "PLA verw. conf"
#define MSG_PREHEAT_2 "ABS voorverwarmen"
#define MSG_PREHEAT_2_N "ABS voorverw. "
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N "aan"
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N "Bed"
#define MSG_PREHEAT_2_SETTINGS "ABS verw. conf"
#define MSG_COOLDOWN "Afkoelen"
#define MSG_SWITCH_PS_ON "Stroom aan"
#define MSG_SWITCH_PS_OFF "Stroom uit"
#define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "As verplaatsen"
#define MSG_LEVEL_BED "Level bed"
#define MSG_MOVE_X "Verplaats X"
#define MSG_MOVE_Y "Verplaats Y"
#define MSG_MOVE_Z "Verplaats Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Verplaats 0.1mm"
#define MSG_MOVE_1MM "Verplaats 1mm"
#define MSG_MOVE_10MM "Verplaats 10mm"
#define MSG_SPEED "Snelheid"
#define MSG_BED_Z "Bed Z"
#define MSG_NOZZLE "Nozzle"
#define MSG_BED "Bed"
#define MSG_FAN_SPEED "Fan snelheid"
#define MSG_FLOW "Flow"
#define MSG_CONTROL "Control"
#define MSG_MIN " " LCD_STR_THERMOMETER " Min"
#define MSG_MAX " " LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR " " LCD_STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "Aan "
#define MSG_OFF "Uit"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_SELECT "Selecteer"
#define MSG_ACC "Versn"
#define MSG_VX_JERK "Vx-jerk"
#define MSG_VY_JERK "Vy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_A_TRAVEL "A-travel"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_E1STEPS "E1steps/mm"
#define MSG_E2STEPS "E2steps/mm"
#define MSG_E3STEPS "E3steps/mm"
#define MSG_E4STEPS "E4steps/mm"
#define MSG_TEMPERATURE "Temperatuur"
#define MSG_MOTION "Beweging"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Geheugen opslaan"
#define MSG_LOAD_EPROM "Geheugen laden"
#define MSG_RESTORE_FAILSAFE "Noodstop reset"
#define MSG_REFRESH "Ververs"
#define MSG_WATCH "Info scherm"
#define MSG_PREPARE "Voorbereiden"
#define MSG_TUNE "Afstellen"
#define MSG_PAUSE_PRINT "Print pauzeren"
#define MSG_RESUME_PRINT "Print hervatten"
#define MSG_STOP_PRINT "Print stoppen"
#define MSG_CARD_MENU "Print van SD"
#define MSG_NO_CARD "Geen SD kaart"
#define MSG_DWELL "Slapen..."
#define MSG_USERWAIT "Wachten..."
#define MSG_RESUMING "Print hervatten"
#define MSG_PRINT_ABORTED "Print afgebroken"
#define MSG_NO_MOVE "Geen beweging."
#define MSG_KILLED "Afgebroken. "
#define MSG_STOPPED "Gestopt. "
#define MSG_CONTROL_RETRACT "Retract mm" //accepted English term in Dutch
#define MSG_CONTROL_RETRACT_SWAP "Ruil Retract mm"
#define MSG_CONTROL_RETRACTF "Retract F"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ruil UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Verv. Filament"
#define MSG_INIT_SDCARD "Init. SD kaart"
#define MSG_CNG_SDCARD "Verv. SD Kaart"
#define MSG_ZPROBE_OUT "Z probe uit. bed"
#define MSG_BLTOUCH_SELFTEST "BLTouch Zelf-Test"
#define MSG_BLTOUCH_RESET "Reset BLTouch"
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "Eerst"
#define MSG_ZPROBE_ZOFFSET "Z Offset" //accepted English term in Dutch
#define MSG_BABYSTEP_X "Babystap X"
#define MSG_BABYSTEP_Y "Babystap Y"
#define MSG_BABYSTEP_Z "Babystap Z"
#define MSG_ENDSTOP_ABORT "Endstop afbr."
#define MSG_HEATING_FAILED_LCD "Voorverw. fout"
#define MSG_ERR_REDUNDANT_TEMP "Redun. temp fout"
#define MSG_THERMAL_RUNAWAY "Therm. wegloop"
#define MSG_ERR_MAXTEMP "Err: Max. temp"
#define MSG_ERR_MINTEMP "Err: Min. temp"
#define MSG_ERR_MAXTEMP_BED "Err: Max.tmp bed"
#define MSG_ERR_MINTEMP_BED "Err: Min.tmp bed"
#define MSG_ERR_Z_HOMING "Fout Z homing"
#define MSG_HALTED "PRINTER GESTOPT"
#define MSG_PLEASE_RESET "Reset A.U.B."
#define MSG_SHORT_DAY "d" // One character only. Keep English standard
#define MSG_SHORT_HOUR "h" // One character only
#define MSG_SHORT_MINUTE "m" // One character only
#define MSG_HEATING "Voorwarmen..."
#define MSG_HEATING_COMPLETE "Voorverw. kompl."
#define MSG_BED_HEATING "Bed voorverw."
#define MSG_BED_DONE "Bed is voorverw."
#define MSG_DELTA_CALIBRATE "Delta Calibratie"
#define MSG_DELTA_CALIBRATE_X "Kalibreer X"
#define MSG_DELTA_CALIBRATE_Y "Kalibreer Y"
#define MSG_DELTA_CALIBRATE_Z "Kalibreer Z"
#define MSG_DELTA_CALIBRATE_CENTER "Kalibreer Midden"
#define MSG_INFO_STATS_MENU "Printer Stats"
#define MSG_INFO_BOARD_MENU "Board Info" //accepted English term in Dutch
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
#define MSG_INFO_EXTRUDERS "Extruders"
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_MENU "Over Printer"
#define MSG_INFO_PRINTER_MENU "Printer Info"
#define MSG_INFO_PROTOCOL "Protocol"
#define MSG_LIGHTS_ON "Case licht aan"
#define MSG_LIGHTS_OFF "Case licht uit"
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Printed Aantal"
#define MSG_INFO_COMPLETED_PRINTS "Totaal Voltooid"
#define MSG_INFO_PRINT_TIME "Totale Printtijd"
#define MSG_INFO_PRINT_LONGEST "Langste Printtijd"
#define MSG_INFO_PRINT_FILAMENT "Totaal Extrudeert"
#else
#define MSG_INFO_PRINT_COUNT "Aantal"
#define MSG_INFO_COMPLETED_PRINTS "Voltooid"
#define MSG_INFO_PRINT_TIME "Printtijd "
#define MSG_INFO_PRINT_LONGEST "Langste"
#define MSG_INFO_PRINT_FILAMENT "Extrud."
#endif
#define MSG_INFO_MIN_TEMP "Min Temp"
#define MSG_INFO_MAX_TEMP "Max Temp"
#define MSG_INFO_PSU "Power Supply" //accepted English term in Dutch
#define MSG_DRIVE_STRENGTH "Motorstroom"
#define MSG_DAC_PERCENT "Driver %" //accepted English term in Dutch
#define MSG_DAC_EEPROM_WRITE "DAC Opslaan"
#define MSG_FILAMENT_CHANGE_HEADER "WISSEL FILAMENT"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "WISSEL OPTIES:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrudeer meer"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Hervat print"
//
// Filament Change screens show up to 3 lines on a 4-line display
// ...or up to 2 lines on a 3-line display
//
#if LCD_HEIGHT >= 4
// Up to 3 lines
#define MSG_FILAMENT_CHANGE_INIT_1 "Wacht voor start"
#define MSG_FILAMENT_CHANGE_INIT_2 "filament te"
#define MSG_FILAMENT_CHANGE_INIT_3 "verwisselen"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wacht voor"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament uit"
#define MSG_FILAMENT_CHANGE_UNLOAD_3 "te laden"
#define MSG_FILAMENT_CHANGE_INSERT_1 "Laad filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "en druk knop"
#define MSG_FILAMENT_CHANGE_INSERT_3 "om verder..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Wacht voor"
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament te"
#define MSG_FILAMENT_CHANGE_LOAD_3 "laden"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wacht voor"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament te"
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 "extruderen"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wacht voor print"
#define MSG_FILAMENT_CHANGE_RESUME_2 "om verder"
#define MSG_FILAMENT_CHANGE_RESUME_3 "te gaan"
#else // LCD_HEIGHT < 4
// Up to 2 lines
#define MSG_FILAMENT_CHANGE_INIT_1 "Wacht voor"
#define MSG_FILAMENT_CHANGE_INIT_2 "start..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wacht voor"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "uitladen..."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Laad filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "en druk knop"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Wacht voor"
#define MSG_FILAMENT_CHANGE_LOAD_2 "inladen..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wacht voor"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "extrudering"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wacht voor"
#define MSG_FILAMENT_CHANGE_RESUME_2 "printing..."
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_NL_H