Firmware/Marlin
2012-08-22 10:54:55 +02:00
..
Gen7 Fix cast warning in Gen7 2012-02-23 18:50:05 +01:00
hardware/tools/avr/etc ATMega1284P support for Arduino IDE 2012-02-17 11:41:47 +01:00
Sanguino Fixed compiler warning for Sanguino compile 2012-02-26 17:35:01 +01:00
cardreader.cpp made prepare->autostart independent of current folder. 2012-03-19 20:24:40 +01:00
cardreader.h __ header file replace 2012-06-02 20:44:17 +02:00
Configuration_adv.h Added support for dual Z axis stepper drivers 2012-08-04 00:32:26 -06:00
Configuration.h Disable FAST_PWM by default. On some systems it does not work ok. 2012-08-11 15:51:04 +02:00
COPYING first commit 2011-08-12 22:28:35 +02:00
create_speed_lookuptable.py Added 20MHz support. 2012-03-11 12:25:04 +01:00
createTemperatureLookup.py first commit 2011-08-12 22:28:35 +02:00
EEPROMwrite.h Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory. 2012-08-21 23:46:10 +01:00
fastio.h Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2012-02-13 13:07:55 +01:00
language.h Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory. 2012-08-21 23:46:10 +01:00
Makefile Makefile: Better display of size (device memory usage) 2012-08-10 19:36:30 +01:00
Marlin.h Merge pull request #208 from Enchiridion/Marlin_v1 2012-08-11 01:42:49 -07:00
Marlin.pde Do not use feedrate multiiply on Z and E only moves. 2012-08-12 18:13:34 +02:00
MarlinSerial.cpp Teensylu support. 2012-02-09 19:27:45 +01:00
MarlinSerial.h Teensylu support. 2012-02-09 19:27:45 +01:00
motion_control.cpp software_endstops: use *_MIN_POS and *_MAX_POS for arcs 2012-08-10 19:36:30 +01:00
motion_control.h Removed interrupt nesting in the stepper ISR. 2011-11-27 21:12:55 +01:00
pins.h Added support for dual Z axis stepper drivers 2012-08-04 00:32:26 -06:00
planner.cpp Fixed AD595 define 2012-06-11 17:33:42 +02:00
planner.h Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer. 2012-05-09 08:05:13 +03:00
Sd2Card.cpp made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
Sd2Card.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
Sd2PinMap.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdBaseFile.cpp Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0. 2012-02-11 16:02:47 +01:00
SdBaseFile.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdFatConfig.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdFatStructs.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdFatUtil.cpp Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0. 2012-02-11 16:02:47 +01:00
SdFatUtil.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdFile.cpp made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdFile.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdInfo.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdVolume.cpp made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdVolume.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
speed_lookuptable.h Added 20MHz support. 2012-03-11 12:25:04 +01:00
stepper.cpp Added support for dual Z axis stepper drivers 2012-08-04 00:32:26 -06:00
stepper.h merging 2011-12-12 20:35:46 +01:00
temperature.cpp Add Duty Cycling to the Heater Bed 2012-08-11 09:17:47 +03:00
temperature.h Added support for 2nd extruder temperature to UltraLCD 2012-04-27 14:51:32 +02:00
thermistortables.h Merge pull request #170 from linagee/Marlin_v1 2012-06-02 03:46:56 -07:00
ultralcd.h Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory. 2012-08-21 23:46:10 +01:00
ultralcd.pde Fix for #201 2012-08-22 10:54:55 +02:00
watchdog.h __ header file replace 2012-06-02 20:44:17 +02:00
watchdog.pde simplified the includes, makefile now works with arduino23 2011-12-22 14:55:45 +01:00
wiring.h add wiring.h, that can be used to overwrite: 2011-12-22 14:57:28 +01:00