f3f26f7cb3
Reverse engineered from the unpublished firmware from Creality, inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". Configurations were found by seeing what code was compiled into the firmware, and constants used there. They used Marlin 1.0.1, because * 1.0.0 had very different serial output in `setup()` and overall code structure. * 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`. For U8Glib, a version between 1.14 and 1.17 was used, because * 1.12 didn't have the extra speed argument to u8g_InitCom. * 1.13 didn't have the soft reset instruction for UC1701 initialization. * 1.18 has a new directory structure. Quirks * The value of PID_dT hints that F_CPU is 20M, but MarlinSerial.begin suggests it's indeed 16M (and the board uses 16M). Left at 16M for now. * The LED and DOGLCD_CS are on the same pin.
155 lines
7.2 KiB
C
155 lines
7.2 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#ifndef BOARDS_H
|
|
#define BOARDS_H
|
|
|
|
#define BOARD_UNKNOWN -1
|
|
|
|
//
|
|
// RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
|
|
//
|
|
|
|
#define BOARD_RAMPS_OLD 3 // MEGA/RAMPS up to 1.2
|
|
|
|
#define BOARD_RAMPS_13_EFB 33 // RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
|
|
#define BOARD_RAMPS_13_EEB 34 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
|
|
#define BOARD_RAMPS_13_EFF 35 // RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
|
|
#define BOARD_RAMPS_13_EEF 36 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
|
|
#define BOARD_RAMPS_13_SF 38 // RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
|
|
|
|
#define BOARD_RAMPS_14_EFB 43 // RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
|
|
#define BOARD_RAMPS_14_EEB 44 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
|
|
#define BOARD_RAMPS_14_EFF 45 // RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
|
|
#define BOARD_RAMPS_14_EEF 46 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
|
|
#define BOARD_RAMPS_14_SF 48 // RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
|
|
|
|
#define BOARD_RAMPS_PLUS_EFB 143 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed)
|
|
#define BOARD_RAMPS_PLUS_EEB 144 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed)
|
|
#define BOARD_RAMPS_PLUS_EFF 145 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1)
|
|
#define BOARD_RAMPS_PLUS_EEF 146 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan)
|
|
#define BOARD_RAMPS_PLUS_SF 148 // RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
|
|
|
|
//
|
|
// RAMPS Derivatives - ATmega1280, ATmega2560
|
|
//
|
|
|
|
#define BOARD_3DRAG 77 // 3Drag Controller
|
|
#define BOARD_K8200 78 // Velleman K8200 Controller (derived from 3Drag Controller)
|
|
#define BOARD_K8400 79 // Velleman K8400 Controller (derived from 3Drag Controller)
|
|
#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers
|
|
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
|
|
#define BOARD_MKS_BASE 40 // MKS BASE 1.0
|
|
#define BOARD_MKS_13 47 // MKS v1.3 or 1.4 (maybe higher)
|
|
#define BOARD_MKS_GEN_L 53 // MKS GEN L
|
|
#define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica)
|
|
#define BOARD_FELIX2 37 // Felix 2.0+ Electronics Board (RAMPS like)
|
|
#define BOARD_RIGIDBOARD 42 // Invent-A-Part RigidBoard
|
|
#define BOARD_RIGIDBOARD_V2 52 // Invent-A-Part RigidBoard V2
|
|
#define BOARD_SAINSMART_2IN1 49 // Sainsmart 2-in-1 board
|
|
#define BOARD_ULTIMAKER 7 // Ultimaker
|
|
#define BOARD_ULTIMAKER_OLD 71 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
|
#define BOARD_AZTEEG_X3 67 // Azteeg X3
|
|
#define BOARD_AZTEEG_X3_PRO 68 // Azteeg X3 Pro
|
|
#define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
|
#define BOARD_RUMBA 80 // Rumba
|
|
#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D
|
|
#define BOARD_MAKEBOARD_MINI 431 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
|
|
|
//
|
|
// Other ATmega1280, ATmega2560
|
|
//
|
|
|
|
#define BOARD_CNCONTROLS_11 111 // Cartesio CN Controls V11
|
|
#define BOARD_CNCONTROLS_12 112 // Cartesio CN Controls V12
|
|
#define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0
|
|
#define BOARD_CHEAPTRONIC_V2 21 // Cheaptronic v2.0
|
|
#define BOARD_MIGHTYBOARD_REVE 200 // Makerbot Mightyboard Revision E
|
|
#define BOARD_MEGATRONICS 70 // Megatronics
|
|
#define BOARD_MEGATRONICS_2 701 // Megatronics v2.0
|
|
#define BOARD_MEGATRONICS_3 703 // Megatronics v3.0
|
|
#define BOARD_MEGATRONICS_31 704 // Megatronics v3.1
|
|
#define BOARD_RAMBO 301 // Rambo
|
|
#define BOARD_MINIRAMBO 302 // Mini-Rambo
|
|
#define BOARD_MINIRAMBO_10A 303 // Mini-Rambo 1.0a
|
|
#define BOARD_ELEFU_3 21 // Elefu Ra Board (v3)
|
|
#define BOARD_LEAPFROG 999 // Leapfrog
|
|
#define BOARD_MEGACONTROLLER 310 // Mega controller
|
|
#define BOARD_SCOOVO_X9H 321 // abee Scoovo X9H
|
|
#define BOARD_GT2560_REV_A 74 // Geeetech GT2560 Rev. A
|
|
#define BOARD_GT2560_REV_A_PLUS 75 // Geeetech GT2560 Rev. A+ (with auto level probe)
|
|
|
|
//
|
|
// ATmega1281, ATmega2561
|
|
//
|
|
|
|
#define BOARD_MINITRONICS 702 // Minitronics v1.0/1.1
|
|
#define BOARD_SILVER_GATE 25 // Silvergate v1.0
|
|
|
|
//
|
|
// Sanguinololu and Derivatives - ATmega644P, ATmega1284P
|
|
//
|
|
|
|
#define BOARD_SANGUINOLOLU_11 6 // Sanguinololu < 1.2
|
|
#define BOARD_SANGUINOLOLU_12 62 // Sanguinololu 1.2 and above
|
|
#define BOARD_MELZI 63 // Melzi
|
|
#define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version)
|
|
#define BOARD_MELZI_CREALITY 89 // Melzi Creality3D board (for CR-10 etc)
|
|
#define BOARD_MELZI_MALYAN 92 // Melzi Malyan M150 board
|
|
#define BOARD_CREALITY_ENDER 601 // Creality Ender
|
|
#define BOARD_STB_11 64 // STB V1.1
|
|
#define BOARD_AZTEEG_X1 65 // Azteeg X1
|
|
|
|
//
|
|
// Other ATmega644P, ATmega644, ATmega1284P
|
|
//
|
|
|
|
#define BOARD_GEN3_MONOLITHIC 22 // Gen3 Monolithic Electronics
|
|
#define BOARD_GEN3_PLUS 9 // Gen3+
|
|
#define BOARD_GEN6 5 // Gen6
|
|
#define BOARD_GEN6_DELUXE 51 // Gen6 deluxe
|
|
#define BOARD_GEN7_CUSTOM 10 // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
|
|
#define BOARD_GEN7_12 11 // Gen7 v1.1, v1.2
|
|
#define BOARD_GEN7_13 12 // Gen7 v1.3
|
|
#define BOARD_GEN7_14 13 // Gen7 v1.4
|
|
#define BOARD_OMCA_A 90 // Alpha OMCA board
|
|
#define BOARD_OMCA 91 // Final OMCA board
|
|
#define BOARD_SETHI 20 // Sethi 3D_1
|
|
#define BOARD_ANET_10 69 // Anet 1.0 (Melzi clone)
|
|
|
|
//
|
|
// Teensyduino - AT90USB1286, AT90USB1286P
|
|
//
|
|
|
|
#define BOARD_TEENSYLU 8 // Teensylu
|
|
#define BOARD_PRINTRBOARD 81 // Printrboard (AT90USB1286)
|
|
#define BOARD_PRINTRBOARD_REVF 811 // Printrboard Revision F (AT90USB1286)
|
|
#define BOARD_BRAINWAVE 82 // Brainwave (AT90USB646)
|
|
#define BOARD_BRAINWAVE_PRO 85 // Brainwave Pro (AT90USB1286)
|
|
#define BOARD_SAV_MKI 83 // SAV Mk-I (AT90USB1286)
|
|
#define BOARD_TEENSY2 84 // Teensy++2.0 (AT90USB1286) - CLI compile: HARDWARE_MOTHERBOARD=84 make
|
|
#define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board
|
|
|
|
#define MB(board) (MOTHERBOARD==BOARD_##board)
|
|
|
|
#endif // __BOARDS_H
|