Firmware/Marlin/language_fi.h
2015-03-10 17:46:25 +01:00

132 lines
6.8 KiB
C

/**
* Finnish
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_FI_H
#define LANGUAGE_FI_H
#define MAPPER_C2C3
#define WELCOME_MSG MACHINE_NAME " valmis."
#define MSG_SD_INSERTED "Kortti asetettu"
#define MSG_SD_REMOVED "Kortti poistettu"
#define MSG_MAIN "Palaa"
#define MSG_AUTOSTART "Automaatti"
#define MSG_DISABLE_STEPPERS "Vapauta moottorit"
#define MSG_AUTO_HOME "Aja referenssiin"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Aseta origo"
#define MSG_PREHEAT_PLA "Esilämmitä PLA"
#define MSG_PREHEAT_PLA_N "Esilämmitä PLA "
#define MSG_PREHEAT_PLA_ALL "Esilä. PLA Kaikki"
#define MSG_PREHEAT_PLA_BEDONLY "Esilä. PLA Alusta"
#define MSG_PREHEAT_PLA_SETTINGS "Esilämm. PLA konf"
#define MSG_PREHEAT_ABS "Esilämmitä ABS"
#define MSG_PREHEAT_ABS_N "Esilämmitä ABS "
#define MSG_PREHEAT_ABS_ALL "Esilä. ABS Kaikki"
#define MSG_PREHEAT_ABS_BEDONLY "Esilä. ABS Alusta"
#define MSG_PREHEAT_ABS_SETTINGS "Esilämm. ABS konf"
#define MSG_COOLDOWN "Jäähdytä"
#define MSG_SWITCH_PS_ON "Virta päälle"
#define MSG_SWITCH_PS_OFF "Virta pois"
#define MSG_EXTRUDE "Pursota"
#define MSG_RETRACT "Vedä takaisin"
#define MSG_MOVE_AXIS "Liikuta akseleita"
#define MSG_MOVE_X "Liikuta X"
#define MSG_MOVE_Y "Liikuta Y"
#define MSG_MOVE_Z "Liikuta Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Liikuta 0.1mm"
#define MSG_MOVE_1MM "Liikuta 1mm"
#define MSG_MOVE_10MM "Liikuta 10mm"
#define MSG_SPEED "Nopeus"
#define MSG_NOZZLE "Suutin"
#define MSG_BED "Alusta"
#define MSG_FAN_SPEED "Tuul. nopeus"
#define MSG_FLOW "Virtaus"
#define MSG_CONTROL "Kontrolli"
#define MSG_MIN LCD_STR_THERMOMETER "" Min"
#define MSG_MAX LCD_STR_THERMOMETER "" Max"
#define MSG_FACTOR LCD_STR_THERMOMETER "" Kerr"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Kiihtyv"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VLiike min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-peruuta"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_TEMPERATURE "Lämpötila"
#define MSG_MOTION "Liike"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm³"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_CONTRAST "LCD kontrasti"
#define MSG_STORE_EPROM "Tallenna muistiin"
#define MSG_LOAD_EPROM "Lataa muistista"
#define MSG_RESTORE_FAILSAFE "Palauta oletus"
#define MSG_REFRESH "Päivitä"
#define MSG_WATCH "Seuraa"
#define MSG_PREPARE "Valmistele"
#define MSG_TUNE "Säädä"
#define MSG_PAUSE_PRINT "Keskeytä tulostus"
#define MSG_RESUME_PRINT "Jatka tulostusta"
#define MSG_STOP_PRINT "Pysäytä tulostus"
#define MSG_CARD_MENU "Korttivalikko"
#define MSG_NO_CARD "Ei korttia"
#define MSG_DWELL "Nukkumassa..."
#define MSG_USERWAIT "Odotet. valintaa"
#define MSG_RESUMING "Jatke. tulostusta"
#define MSG_PRINT_ABORTED "Print aborted"
#define MSG_NO_MOVE "Ei liiketta."
#define MSG_KILLED "KILLED. "
#define MSG_STOPPED "STOPPED. "
#define MSG_CONTROL_RETRACT "Vedä mm"
#define MSG_CONTROL_RETRACT_SWAP "Va. Vedä mm"
#define MSG_CONTROL_RETRACTF "Vedä V"
#define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Va. UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoVeto."
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
#define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Kalibrointi"
#define MSG_DELTA_CALIBRATE_X "Kalibroi X"
#define MSG_DELTA_CALIBRATE_Y "Kalibroi Y"
#define MSG_DELTA_CALIBRATE_Z "Kalibroi Z"
#define MSG_DELTA_CALIBRATE_CENTER "Kalibroi Center"
#endif // DELTA_CALIBRATION_MENU
#endif // LANGUAGE_FI_H