History

Scott Lahteine e37a1ded0d Increase BABYSTEP_MULTIPLICATOR to 100 Ideally, it should be calculated based on Z steps per unit so that each babystep corresponds to around 0.025mm. Smaller than this is largely insignificant for typical layer heights.		2017-09-27 00:14:26 -05:00
..
_Bootscreen.h	Arrange example configurations by vendor	2017-07-07 04:48:23 -05:00
Configuration_adv.h	Increase BABYSTEP_MULTIPLICATOR to 100	2017-09-27 00:14:26 -05:00
Configuration.h	Update links to old wiki page	2017-09-23 22:06:45 -05:00
README.md	Arrange example configurations by vendor	2017-07-07 04:48:23 -05:00

README.md

Example Configuration for BQ Hephestos 2

This configuration file is based on the original configuration file shipped with the heavily modified Marlin fork by BQ. The original firmware and configuration file can be found at BQ Github repository.

NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will change by using the original Marlin firmware.

Changelog

2016/03/01 - Initial release
2016/03/21 - Activated 4-point auto leveling by default Updated miscellaneous z-probe values
2016/06/21 - Disabled hot bed related options Activated software endstops SD printing now disables the heater when finished
2016/07/13 - Update the DEFAULT_AXIS_STEPS_PER_UNIT for the Z axis Increased the DEFAULT_XYJERK
2016/12/13 - Configuration updated.
2017/07/06 - Configuration updated to the latest Marlin version. Added support for the official BQ heated bed kit.