History

Scott Lahteine e37a1ded0d Increase BABYSTEP_MULTIPLICATOR to 100 Ideally, it should be calculated based on Z steps per unit so that each babystep corresponds to around 0.025mm. Smaller than this is largely insignificant for typical layer heights.		2017-09-27 00:14:26 -05:00
..
Configuration_adv.h	Increase BABYSTEP_MULTIPLICATOR to 100	2017-09-27 00:14:26 -05:00
Configuration.h	Update links to old wiki page	2017-09-23 22:06:45 -05:00
README.md	readme.md -> README.md	2016-07-03 22:15:24 +01:00

README.md

Example Configuration for OpenBeam Kossel Pro BRAINWAVE_PRO

Configuration files for the Openbeam Kossel Pro as delivered in their KickStarter distribution

I @Wackerbarth tested this version on my Kossel Pro and Arduino 1.6.5 for Mac. This configuration is a transition to merge Terence Tam's configuration with up-to-date Marlin source and a current Arduino IDE