5736 lines
199 KiB
C++
5736 lines
199 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#include "MarlinConfig.h"
|
|
|
|
#if ENABLED(ULTRA_LCD)
|
|
|
|
#include "ultralcd.h"
|
|
#include "Marlin.h"
|
|
#include "language.h"
|
|
#include "cardreader.h"
|
|
#include "temperature.h"
|
|
#include "planner.h"
|
|
#include "stepper.h"
|
|
#include "configuration_store.h"
|
|
#include "utility.h"
|
|
#include "parser.h"
|
|
|
|
#if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER)
|
|
#include "buzzer.h"
|
|
#endif
|
|
|
|
#include "printcounter.h"
|
|
|
|
#if ENABLED(PRINTCOUNTER)
|
|
#include "duration_t.h"
|
|
#endif
|
|
|
|
#if ENABLED(BLTOUCH)
|
|
#include "endstops.h"
|
|
#endif
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
|
#include "ubl.h"
|
|
#elif HAS_ABL
|
|
#include "planner.h"
|
|
#elif ENABLED(MESH_BED_LEVELING) && ENABLED(LCD_BED_LEVELING)
|
|
#include "mesh_bed_leveling.h"
|
|
#endif
|
|
|
|
#if ENABLED(FWRETRACT)
|
|
#include "fwretract.h"
|
|
#endif
|
|
|
|
#if ENABLED(POWER_LOSS_RECOVERY)
|
|
#include "power_loss_recovery.h"
|
|
#endif
|
|
|
|
#if ENABLED(STATUS_MESSAGE_SCROLLING)
|
|
#if LONG_FILENAME_LENGTH > CHARSIZE * 2 * (LCD_WIDTH)
|
|
#define MAX_MESSAGE_LENGTH LONG_FILENAME_LENGTH
|
|
#else
|
|
#define MAX_MESSAGE_LENGTH CHARSIZE * 2 * (LCD_WIDTH)
|
|
#endif
|
|
uint8_t status_scroll_pos = 0;
|
|
#else
|
|
#define MAX_MESSAGE_LENGTH CHARSIZE * (LCD_WIDTH)
|
|
#endif
|
|
|
|
char lcd_status_message[MAX_MESSAGE_LENGTH + 1];
|
|
uint8_t lcd_status_update_delay = 1, // First update one loop delayed
|
|
lcd_status_message_level; // Higher level blocks lower level
|
|
|
|
#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
|
|
millis_t previous_lcd_status_ms = 0;
|
|
#endif
|
|
|
|
#if ENABLED(ULTIPANEL) && ENABLED(SCROLL_LONG_FILENAMES)
|
|
uint8_t filename_scroll_pos, filename_scroll_max, filename_scroll_hash;
|
|
#endif
|
|
|
|
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
|
|
uint8_t progress_bar_percent;
|
|
#endif
|
|
|
|
#if ENABLED(DOGLCD)
|
|
#include "ultralcd_impl_DOGM.h"
|
|
#include <U8glib.h>
|
|
bool drawing_screen, // = false
|
|
first_page;
|
|
#else
|
|
#include "ultralcd_impl_HD44780.h"
|
|
constexpr bool first_page = true;
|
|
#endif
|
|
|
|
// The main status screen
|
|
void lcd_status_screen();
|
|
|
|
millis_t next_lcd_update_ms;
|
|
|
|
uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to draw, decrements after every draw. Set to 2 in LCD routines so the LCD gets at least 1 full redraw (first redraw is partial)
|
|
uint16_t max_display_update_time = 0;
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
|
|
#define DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(_type, _name, _strFunc) \
|
|
inline void lcd_implementation_drawmenu_setting_edit_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \
|
|
UNUSED(pstr2); \
|
|
DRAWMENU_SETTING_EDIT_GENERIC(_strFunc(*(data))); \
|
|
} \
|
|
inline void lcd_implementation_drawmenu_setting_edit_callback_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \
|
|
UNUSED(pstr2); \
|
|
DRAWMENU_SETTING_EDIT_GENERIC(_strFunc(*(data))); \
|
|
} \
|
|
inline void lcd_implementation_drawmenu_setting_edit_accessor_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type (*pget)(), void (*pset)(_type), ...) { \
|
|
UNUSED(pstr2); UNUSED(pset); \
|
|
DRAWMENU_SETTING_EDIT_GENERIC(_strFunc(pget())); \
|
|
} \
|
|
typedef void _name##_void
|
|
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int16_t, int3, itostr3);
|
|
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint8_t, int8, i8tostr3);
|
|
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3);
|
|
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52);
|
|
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float43, ftostr43sign);
|
|
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float5, ftostr5rj);
|
|
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign);
|
|
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52sign, ftostr52sign);
|
|
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj);
|
|
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint32_t, long5, ftostr5rj);
|
|
#define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) DRAW_BOOL_SETTING(sel, row, pstr, data)
|
|
#define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) DRAW_BOOL_SETTING(sel, row, pstr, data)
|
|
#define lcd_implementation_drawmenu_setting_edit_accessor_bool(sel, row, pstr, pstr2, pget, pset) DRAW_BOOL_SETTING(sel, row, pstr, data)
|
|
|
|
#ifndef TALL_FONT_CORRECTION
|
|
#define TALL_FONT_CORRECTION 0
|
|
#endif
|
|
|
|
bool no_reentry = false;
|
|
constexpr int8_t menu_bottom = LCD_HEIGHT - (TALL_FONT_CORRECTION);
|
|
|
|
// Initialized by settings.load()
|
|
int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2];
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
|
|
bool lcd_external_control; // = false
|
|
#endif
|
|
|
|
#if ENABLED(BABYSTEPPING)
|
|
long babysteps_done = 0;
|
|
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
|
static void lcd_babystep_zoffset();
|
|
#else
|
|
static void lcd_babystep_z();
|
|
#endif
|
|
#endif
|
|
|
|
#if ENABLED(DAC_STEPPER_CURRENT)
|
|
#include "stepper_dac.h" //was dac_mcp4728.h MarlinMain uses stepper dac for the m-codes
|
|
uint8_t driverPercent[XYZE];
|
|
#endif
|
|
|
|
////////////////////////////////////////////
|
|
///////////////// Menu Tree ////////////////
|
|
////////////////////////////////////////////
|
|
|
|
void lcd_main_menu();
|
|
void lcd_tune_menu();
|
|
void lcd_prepare_menu();
|
|
void lcd_move_menu();
|
|
void lcd_control_menu();
|
|
void lcd_control_temperature_menu();
|
|
void lcd_control_motion_menu();
|
|
|
|
#if DISABLED(SLIM_LCD_MENUS)
|
|
void lcd_control_temperature_preheat_material1_settings_menu();
|
|
void lcd_control_temperature_preheat_material2_settings_menu();
|
|
#endif
|
|
|
|
#if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
void lcd_control_filament_menu();
|
|
#endif
|
|
|
|
#if ENABLED(LCD_INFO_MENU)
|
|
#if ENABLED(PRINTCOUNTER)
|
|
void lcd_info_stats_menu();
|
|
#endif
|
|
void lcd_info_thermistors_menu();
|
|
void lcd_info_board_menu();
|
|
void lcd_info_menu();
|
|
#endif // LCD_INFO_MENU
|
|
|
|
#if ENABLED(LED_CONTROL_MENU)
|
|
#include "leds.h"
|
|
void lcd_led_menu();
|
|
#endif
|
|
|
|
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
#if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
|
void lcd_change_filament_menu();
|
|
#else
|
|
void lcd_temp_menu_e0_filament_change();
|
|
#endif
|
|
#endif
|
|
|
|
#if ENABLED(DAC_STEPPER_CURRENT)
|
|
void dac_driver_commit();
|
|
void dac_driver_getValues();
|
|
void lcd_dac_menu();
|
|
void lcd_dac_write_eeprom();
|
|
#endif
|
|
|
|
#if ENABLED(FWRETRACT)
|
|
void lcd_control_retract_menu();
|
|
#endif
|
|
|
|
#if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
|
|
void lcd_delta_calibrate_menu();
|
|
#endif
|
|
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
static float new_z_fade_height;
|
|
void _lcd_set_z_fade_height() { set_z_fade_height(new_z_fade_height); }
|
|
#endif
|
|
|
|
////////////////////////////////////////////
|
|
//////////// Menu System Actions ///////////
|
|
////////////////////////////////////////////
|
|
|
|
#define menu_action_back(dummy) _menu_action_back()
|
|
void _menu_action_back();
|
|
void menu_action_submenu(screenFunc_t data);
|
|
void menu_action_gcode(const char* pgcode);
|
|
void menu_action_function(menuAction_t data);
|
|
|
|
#define DECLARE_MENU_EDIT_TYPE(_type, _name) \
|
|
bool _menu_edit_ ## _name(); \
|
|
void menu_edit_ ## _name(); \
|
|
void menu_edit_callback_ ## _name(); \
|
|
void _menu_action_setting_edit_ ## _name(const char * const pstr, _type* const ptr, const _type minValue, const _type maxValue); \
|
|
void menu_action_setting_edit_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue); \
|
|
void menu_action_setting_edit_callback_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback, const bool live=false); \
|
|
typedef void _name##_void
|
|
|
|
DECLARE_MENU_EDIT_TYPE(int16_t, int3);
|
|
DECLARE_MENU_EDIT_TYPE(uint8_t, int8);
|
|
DECLARE_MENU_EDIT_TYPE(float, float3);
|
|
DECLARE_MENU_EDIT_TYPE(float, float52);
|
|
DECLARE_MENU_EDIT_TYPE(float, float43);
|
|
DECLARE_MENU_EDIT_TYPE(float, float5);
|
|
DECLARE_MENU_EDIT_TYPE(float, float51);
|
|
DECLARE_MENU_EDIT_TYPE(float, float52sign);
|
|
DECLARE_MENU_EDIT_TYPE(float, float62);
|
|
DECLARE_MENU_EDIT_TYPE(uint32_t, long5);
|
|
|
|
void menu_action_setting_edit_bool(const char* pstr, bool* ptr);
|
|
void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callbackFunc);
|
|
|
|
#if ENABLED(SDSUPPORT)
|
|
void lcd_sdcard_menu();
|
|
void menu_action_sdfile(const char* filename, char* longFilename);
|
|
void menu_action_sddirectory(const char* filename, char* longFilename);
|
|
#endif
|
|
|
|
////////////////////////////////////////////
|
|
//////////// Menu System Macros ////////////
|
|
////////////////////////////////////////////
|
|
|
|
/**
|
|
* MENU_ITEM generates draw & handler code for a menu item, potentially calling:
|
|
*
|
|
* lcd_implementation_drawmenu_[type](sel, row, label, arg3...)
|
|
* menu_action_[type](arg3...)
|
|
*
|
|
* Examples:
|
|
* MENU_ITEM(back, MSG_WATCH, 0 [dummy parameter] )
|
|
* or
|
|
* MENU_BACK(MSG_WATCH)
|
|
* lcd_implementation_drawmenu_back(sel, row, PSTR(MSG_WATCH))
|
|
* menu_action_back()
|
|
*
|
|
* MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause)
|
|
* lcd_implementation_drawmenu_function(sel, row, PSTR(MSG_PAUSE_PRINT), lcd_sdcard_pause)
|
|
* menu_action_function(lcd_sdcard_pause)
|
|
*
|
|
* MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999)
|
|
* MENU_ITEM(setting_edit_int3, MSG_SPEED, PSTR(MSG_SPEED), &feedrate_percentage, 10, 999)
|
|
* lcd_implementation_drawmenu_setting_edit_int3(sel, row, PSTR(MSG_SPEED), PSTR(MSG_SPEED), &feedrate_percentage, 10, 999)
|
|
* menu_action_setting_edit_int3(PSTR(MSG_SPEED), &feedrate_percentage, 10, 999)
|
|
*
|
|
*/
|
|
#define _MENU_ITEM_PART_1(TYPE, ...) \
|
|
if (_menuLineNr == _thisItemNr) { \
|
|
if (encoderLine == _thisItemNr && lcd_clicked) { \
|
|
lcd_clicked = false
|
|
|
|
#define _MENU_ITEM_PART_2(TYPE, PLABEL, ...) \
|
|
menu_action_ ## TYPE(__VA_ARGS__); \
|
|
if (screen_changed) return; \
|
|
} \
|
|
if (lcdDrawUpdate) \
|
|
lcd_implementation_drawmenu_ ## TYPE(encoderLine == _thisItemNr, _lcdLineNr, PLABEL, ## __VA_ARGS__); \
|
|
} \
|
|
++_thisItemNr
|
|
|
|
#define MENU_ITEM_P(TYPE, PLABEL, ...) do { \
|
|
_skipStatic = false; \
|
|
_MENU_ITEM_PART_1(TYPE, ## __VA_ARGS__); \
|
|
_MENU_ITEM_PART_2(TYPE, PLABEL, ## __VA_ARGS__); \
|
|
}while(0)
|
|
|
|
#define MENU_ITEM(TYPE, LABEL, ...) MENU_ITEM_P(TYPE, PSTR(LABEL), ## __VA_ARGS__)
|
|
|
|
#define MENU_BACK(LABEL) MENU_ITEM(back, LABEL, 0)
|
|
|
|
// Used to print static text with no visible cursor.
|
|
// Parameters: label [, bool center [, bool invert [, char *value] ] ]
|
|
#define STATIC_ITEM_P(LABEL, ...) \
|
|
if (_menuLineNr == _thisItemNr) { \
|
|
if (_skipStatic && encoderLine <= _thisItemNr) { \
|
|
encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
|
|
++encoderLine; \
|
|
} \
|
|
if (lcdDrawUpdate) \
|
|
lcd_implementation_drawmenu_static(_lcdLineNr, LABEL, ## __VA_ARGS__); \
|
|
} \
|
|
++_thisItemNr
|
|
|
|
#define STATIC_ITEM(LABEL, ...) STATIC_ITEM_P(PSTR(LABEL), ## __VA_ARGS__)
|
|
|
|
#if ENABLED(ENCODER_RATE_MULTIPLIER)
|
|
|
|
bool encoderRateMultiplierEnabled;
|
|
#define ENCODER_RATE_MULTIPLY(F) (encoderRateMultiplierEnabled = F)
|
|
|
|
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
|
|
|
/**
|
|
* MENU_MULTIPLIER_ITEM generates drawing and handling code for a multiplier menu item
|
|
*/
|
|
#define MENU_MULTIPLIER_ITEM(TYPE, LABEL, ...) do { \
|
|
_MENU_ITEM_PART_1(TYPE, ## __VA_ARGS__); \
|
|
encoderRateMultiplierEnabled = true; \
|
|
lastEncoderMovementMillis = 0; \
|
|
_MENU_ITEM_PART_2(TYPE, PSTR(LABEL), ## __VA_ARGS__); \
|
|
}while(0)
|
|
|
|
#else // !ENCODER_RATE_MULTIPLIER
|
|
#define ENCODER_RATE_MULTIPLY(F) NOOP
|
|
#endif // !ENCODER_RATE_MULTIPLIER
|
|
|
|
#define MENU_ITEM_DUMMY() do { _thisItemNr++; }while(0)
|
|
#define MENU_ITEM_EDIT(TYPE, LABEL, ...) MENU_ITEM(setting_edit_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__)
|
|
#define MENU_ITEM_EDIT_CALLBACK(TYPE, LABEL, ...) MENU_ITEM(setting_edit_callback_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__)
|
|
#if ENABLED(ENCODER_RATE_MULTIPLIER)
|
|
#define MENU_MULTIPLIER_ITEM_EDIT(TYPE, LABEL, ...) MENU_MULTIPLIER_ITEM(setting_edit_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__)
|
|
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(TYPE, LABEL, ...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__)
|
|
#else // !ENCODER_RATE_MULTIPLIER
|
|
#define MENU_MULTIPLIER_ITEM_EDIT(TYPE, LABEL, ...) MENU_ITEM(setting_edit_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__)
|
|
#define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(TYPE, LABEL, ...) MENU_ITEM(setting_edit_callback_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__)
|
|
#endif // !ENCODER_RATE_MULTIPLIER
|
|
|
|
#define SCREEN_OR_MENU_LOOP() \
|
|
int8_t _menuLineNr = encoderTopLine, _thisItemNr; \
|
|
for (int8_t _lcdLineNr = 0; _lcdLineNr < menu_bottom; _lcdLineNr++, _menuLineNr++) { \
|
|
_thisItemNr = 0
|
|
|
|
/**
|
|
* START_SCREEN Opening code for a screen having only static items.
|
|
* Do simplified scrolling of the entire screen.
|
|
*
|
|
* START_MENU Opening code for a screen with menu items.
|
|
* Scroll as-needed to keep the selected line in view.
|
|
*/
|
|
#define START_SCREEN() \
|
|
scroll_screen(menu_bottom, false); \
|
|
bool _skipStatic = false; \
|
|
SCREEN_OR_MENU_LOOP()
|
|
|
|
#define START_MENU() \
|
|
scroll_screen(1, true); \
|
|
bool _skipStatic = true; \
|
|
SCREEN_OR_MENU_LOOP()
|
|
|
|
#define END_SCREEN() \
|
|
} \
|
|
screen_items = _thisItemNr
|
|
|
|
#define END_MENU() \
|
|
} \
|
|
screen_items = _thisItemNr; \
|
|
UNUSED(_skipStatic)
|
|
|
|
////////////////////////////////////////////
|
|
///////////// Global Variables /////////////
|
|
////////////////////////////////////////////
|
|
|
|
/**
|
|
* REVERSE_MENU_DIRECTION
|
|
*
|
|
* To reverse the menu direction we need a general way to reverse
|
|
* the direction of the encoder everywhere. So encoderDirection is
|
|
* added to allow the encoder to go the other way.
|
|
*
|
|
* This behavior is limited to scrolling Menus and SD card listings,
|
|
* and is disabled in other contexts.
|
|
*/
|
|
#if ENABLED(REVERSE_MENU_DIRECTION)
|
|
int8_t encoderDirection = 1;
|
|
#define ENCODER_DIRECTION_NORMAL() (encoderDirection = 1)
|
|
#define ENCODER_DIRECTION_MENUS() (encoderDirection = -1)
|
|
#else
|
|
#define ENCODER_DIRECTION_NORMAL() ;
|
|
#define ENCODER_DIRECTION_MENUS() ;
|
|
#endif
|
|
|
|
// Encoder Movement
|
|
volatile int8_t encoderDiff; // Updated in lcd_buttons_update, added to encoderPosition every LCD update
|
|
uint32_t encoderPosition;
|
|
millis_t lastEncoderMovementMillis = 0;
|
|
|
|
// Button States
|
|
bool lcd_clicked, wait_for_unclick;
|
|
volatile uint8_t buttons;
|
|
millis_t next_button_update_ms;
|
|
#if ENABLED(REPRAPWORLD_KEYPAD)
|
|
volatile uint8_t buttons_reprapworld_keypad;
|
|
#endif
|
|
#if ENABLED(LCD_HAS_SLOW_BUTTONS)
|
|
volatile uint8_t slow_buttons;
|
|
#endif
|
|
|
|
// Menu System Navigation
|
|
screenFunc_t currentScreen = lcd_status_screen;
|
|
int8_t encoderTopLine;
|
|
typedef struct {
|
|
screenFunc_t menu_function;
|
|
uint32_t encoder_position;
|
|
} menuPosition;
|
|
menuPosition screen_history[6];
|
|
uint8_t screen_history_depth = 0;
|
|
bool screen_changed, defer_return_to_status;
|
|
|
|
// Value Editing
|
|
const char *editLabel;
|
|
void *editValue;
|
|
int32_t minEditValue, maxEditValue;
|
|
screenFunc_t callbackFunc;
|
|
bool liveEdit;
|
|
|
|
// Manual Moves
|
|
const float manual_feedrate_mm_m[] = MANUAL_FEEDRATE;
|
|
millis_t manual_move_start_time = 0;
|
|
int8_t manual_move_axis = (int8_t)NO_AXIS;
|
|
#if EXTRUDERS > 1
|
|
int8_t manual_move_e_index = 0;
|
|
#else
|
|
#define manual_move_e_index 0
|
|
#endif
|
|
|
|
#if IS_KINEMATIC
|
|
bool processing_manual_move = false;
|
|
float manual_move_offset = 0.0;
|
|
#else
|
|
constexpr bool processing_manual_move = false;
|
|
#endif
|
|
|
|
#if PIN_EXISTS(SD_DETECT)
|
|
uint8_t lcd_sd_status;
|
|
#endif
|
|
|
|
#if ENABLED(PIDTEMP)
|
|
float raw_Ki, raw_Kd; // place-holders for Ki and Kd edits
|
|
#endif
|
|
|
|
inline bool use_click() {
|
|
const bool click = lcd_clicked;
|
|
lcd_clicked = false;
|
|
return click;
|
|
}
|
|
|
|
/**
|
|
* General function to go directly to a screen
|
|
*/
|
|
void lcd_goto_screen(screenFunc_t screen, const uint32_t encoder/*=0*/) {
|
|
if (currentScreen != screen) {
|
|
|
|
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) && ENABLED(BABYSTEPPING)
|
|
static millis_t doubleclick_expire_ms = 0;
|
|
// Going to lcd_main_menu from status screen? Remember first click time.
|
|
// Going back to status screen within a very short time? Go to Z babystepping.
|
|
if (screen == lcd_main_menu) {
|
|
if (currentScreen == lcd_status_screen)
|
|
doubleclick_expire_ms = millis() + DOUBLECLICK_MAX_INTERVAL;
|
|
}
|
|
else if (screen == lcd_status_screen && currentScreen == lcd_main_menu && PENDING(millis(), doubleclick_expire_ms))
|
|
screen =
|
|
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
|
lcd_babystep_zoffset
|
|
#else
|
|
lcd_babystep_z
|
|
#endif
|
|
;
|
|
#endif
|
|
|
|
currentScreen = screen;
|
|
encoderPosition = encoder;
|
|
if (screen == lcd_status_screen) {
|
|
defer_return_to_status = false;
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
|
ubl.lcd_map_control = false;
|
|
#endif
|
|
screen_history_depth = 0;
|
|
}
|
|
lcd_implementation_clear();
|
|
// Re-initialize custom characters that may be re-used
|
|
#if DISABLED(DOGLCD) && ENABLED(AUTO_BED_LEVELING_UBL)
|
|
if (!ubl.lcd_map_control) {
|
|
lcd_set_custom_characters(
|
|
#if ENABLED(LCD_PROGRESS_BAR)
|
|
screen == lcd_status_screen ? CHARSET_INFO : CHARSET_MENU
|
|
#endif
|
|
);
|
|
}
|
|
#elif ENABLED(LCD_PROGRESS_BAR)
|
|
lcd_set_custom_characters(screen == lcd_status_screen ? CHARSET_INFO : CHARSET_MENU);
|
|
#endif
|
|
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
|
|
screen_changed = true;
|
|
#if ENABLED(DOGLCD)
|
|
drawing_screen = false;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Show "Moving..." till moves are done, then revert to previous display.
|
|
*/
|
|
static const char moving[] PROGMEM = MSG_MOVING;
|
|
static const char *sync_message = moving;
|
|
|
|
//
|
|
// Display the synchronize screen until moves are
|
|
// finished, and don't return to the caller until
|
|
// done. ** This blocks the command queue! **
|
|
//
|
|
void _lcd_synchronize() {
|
|
if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT >= 4 ? 1 : 0, sync_message);
|
|
if (no_reentry) return;
|
|
// Make this the current handler till all moves are done
|
|
no_reentry = true;
|
|
const screenFunc_t old_screen = currentScreen;
|
|
lcd_goto_screen(_lcd_synchronize);
|
|
stepper.synchronize(); // idle() is called until moves complete
|
|
no_reentry = false;
|
|
lcd_goto_screen(old_screen);
|
|
}
|
|
|
|
// Display the synchronize screen with a custom message
|
|
// ** This blocks the command queue! **
|
|
void lcd_synchronize(const char * const msg=NULL) {
|
|
sync_message = msg ? msg : moving;
|
|
_lcd_synchronize();
|
|
}
|
|
|
|
void lcd_return_to_status() { lcd_goto_screen(lcd_status_screen); }
|
|
|
|
void lcd_save_previous_screen() {
|
|
if (screen_history_depth < COUNT(screen_history)) {
|
|
screen_history[screen_history_depth].menu_function = currentScreen;
|
|
screen_history[screen_history_depth].encoder_position = encoderPosition;
|
|
++screen_history_depth;
|
|
}
|
|
}
|
|
|
|
void lcd_goto_previous_menu() {
|
|
if (screen_history_depth > 0) {
|
|
--screen_history_depth;
|
|
lcd_goto_screen(
|
|
screen_history[screen_history_depth].menu_function,
|
|
screen_history[screen_history_depth].encoder_position
|
|
);
|
|
}
|
|
else
|
|
lcd_return_to_status();
|
|
}
|
|
|
|
void lcd_goto_previous_menu_no_defer() {
|
|
defer_return_to_status = false;
|
|
lcd_goto_previous_menu();
|
|
}
|
|
|
|
/**
|
|
* Scrolling for menus and other line-based screens
|
|
*
|
|
* encoderLine is the position based on the encoder
|
|
* encoderTopLine is the top menu line to display
|
|
* _lcdLineNr is the index of the LCD line (e.g., 0-3)
|
|
* _menuLineNr is the menu item to draw and process
|
|
* _thisItemNr is the index of each MENU_ITEM or STATIC_ITEM
|
|
* screen_items is the total number of items in the menu (after one call)
|
|
*/
|
|
int8_t encoderLine, screen_items;
|
|
void scroll_screen(const uint8_t limit, const bool is_menu) {
|
|
ENCODER_DIRECTION_MENUS();
|
|
ENCODER_RATE_MULTIPLY(false);
|
|
if (encoderPosition > 0x8000) encoderPosition = 0;
|
|
if (first_page) {
|
|
encoderLine = encoderPosition / (ENCODER_STEPS_PER_MENU_ITEM);
|
|
screen_changed = false;
|
|
}
|
|
if (screen_items > 0 && encoderLine >= screen_items - limit) {
|
|
encoderLine = max(0, screen_items - limit);
|
|
encoderPosition = encoderLine * (ENCODER_STEPS_PER_MENU_ITEM);
|
|
}
|
|
if (is_menu) {
|
|
NOMORE(encoderTopLine, encoderLine);
|
|
if (encoderLine >= encoderTopLine + menu_bottom)
|
|
encoderTopLine = encoderLine - menu_bottom + 1;
|
|
}
|
|
else
|
|
encoderTopLine = encoderLine;
|
|
}
|
|
|
|
#endif // ULTIPANEL
|
|
|
|
/**
|
|
*
|
|
* "Info Screen"
|
|
*
|
|
* This is very display-dependent, so the lcd implementation draws this.
|
|
*/
|
|
|
|
void lcd_status_screen() {
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
ENCODER_DIRECTION_NORMAL();
|
|
ENCODER_RATE_MULTIPLY(false);
|
|
#endif
|
|
|
|
#if ENABLED(LCD_SET_PROGRESS_MANUALLY) && ENABLED(SDSUPPORT) && (ENABLED(LCD_PROGRESS_BAR) || ENABLED(DOGLCD))
|
|
// Progress bar % comes from SD when actively printing
|
|
if (IS_SD_PRINTING)
|
|
progress_bar_percent = card.percentDone();
|
|
#endif
|
|
|
|
#if ENABLED(LCD_PROGRESS_BAR)
|
|
|
|
//
|
|
// HD44780 implements the following message blinking and
|
|
// message expiration because Status Line and Progress Bar
|
|
// share the same line on the display.
|
|
//
|
|
|
|
millis_t ms = millis();
|
|
|
|
// If the message will blink rather than expire...
|
|
#if DISABLED(PROGRESS_MSG_ONCE)
|
|
if (ELAPSED(ms, progress_bar_ms + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME))
|
|
progress_bar_ms = ms;
|
|
#endif
|
|
|
|
#if PROGRESS_MSG_EXPIRE > 0
|
|
|
|
// Handle message expire
|
|
if (expire_status_ms > 0) {
|
|
|
|
#if DISABLED(LCD_SET_PROGRESS_MANUALLY)
|
|
const uint8_t progress_bar_percent = card.percentDone();
|
|
#endif
|
|
|
|
// Expire the message if a job is active and the bar has ticks
|
|
if (progress_bar_percent > 2 && !print_job_timer.isPaused()) {
|
|
if (ELAPSED(ms, expire_status_ms)) {
|
|
lcd_status_message[0] = '\0';
|
|
expire_status_ms = 0;
|
|
}
|
|
}
|
|
else {
|
|
// Defer message expiration before bar appears
|
|
// and during any pause (not just SD)
|
|
expire_status_ms += LCD_UPDATE_INTERVAL;
|
|
}
|
|
}
|
|
|
|
#endif // PROGRESS_MSG_EXPIRE
|
|
|
|
#endif // LCD_PROGRESS_BAR
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
|
|
if (use_click()) {
|
|
#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
|
|
previous_lcd_status_ms = millis(); // get status message to show up for a while
|
|
#endif
|
|
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
|
|
#if ENABLED(LCD_PROGRESS_BAR)
|
|
CHARSET_MENU
|
|
#endif
|
|
);
|
|
lcd_goto_screen(lcd_main_menu);
|
|
return;
|
|
}
|
|
|
|
#if ENABLED(ULTIPANEL_FEEDMULTIPLY)
|
|
const int16_t new_frm = feedrate_percentage + (int32_t)encoderPosition;
|
|
// Dead zone at 100% feedrate
|
|
if ((feedrate_percentage < 100 && new_frm > 100) || (feedrate_percentage > 100 && new_frm < 100)) {
|
|
feedrate_percentage = 100;
|
|
encoderPosition = 0;
|
|
}
|
|
else if (feedrate_percentage == 100) {
|
|
if ((int32_t)encoderPosition > ENCODER_FEEDRATE_DEADZONE) {
|
|
feedrate_percentage += (int32_t)encoderPosition - (ENCODER_FEEDRATE_DEADZONE);
|
|
encoderPosition = 0;
|
|
}
|
|
else if ((int32_t)encoderPosition < -(ENCODER_FEEDRATE_DEADZONE)) {
|
|
feedrate_percentage += (int32_t)encoderPosition + ENCODER_FEEDRATE_DEADZONE;
|
|
encoderPosition = 0;
|
|
}
|
|
}
|
|
else {
|
|
feedrate_percentage = new_frm;
|
|
encoderPosition = 0;
|
|
}
|
|
#endif // ULTIPANEL_FEEDMULTIPLY
|
|
|
|
feedrate_percentage = constrain(feedrate_percentage, 10, 999);
|
|
|
|
#endif // ULTIPANEL
|
|
|
|
lcd_implementation_status_screen();
|
|
}
|
|
|
|
/**
|
|
* Reset the status message
|
|
*/
|
|
void lcd_reset_status() {
|
|
static const char paused[] PROGMEM = MSG_PRINT_PAUSED;
|
|
static const char printing[] PROGMEM = MSG_PRINTING;
|
|
static const char welcome[] PROGMEM = WELCOME_MSG;
|
|
const char *msg;
|
|
if (print_job_timer.isPaused())
|
|
msg = paused;
|
|
#if ENABLED(SDSUPPORT)
|
|
else if (card.sdprinting)
|
|
return lcd_setstatus(card.longFilename[0] ? card.longFilename : card.filename, true);
|
|
#endif
|
|
else if (print_job_timer.isRunning())
|
|
msg = printing;
|
|
else
|
|
msg = welcome;
|
|
|
|
lcd_setstatusPGM(msg, -1);
|
|
}
|
|
|
|
/**
|
|
*
|
|
* draw the kill screen
|
|
*
|
|
*/
|
|
void kill_screen(const char* lcd_msg) {
|
|
lcd_init();
|
|
lcd_setalertstatusPGM(lcd_msg);
|
|
lcd_kill_screen();
|
|
}
|
|
|
|
/**
|
|
*
|
|
* Audio feedback for controller clicks
|
|
*
|
|
*/
|
|
void lcd_buzz(const long duration, const uint16_t freq) {
|
|
#if ENABLED(LCD_USE_I2C_BUZZER)
|
|
lcd.buzz(duration, freq);
|
|
#elif PIN_EXISTS(BEEPER)
|
|
buzzer.tone(duration, freq);
|
|
#else
|
|
UNUSED(duration); UNUSED(freq);
|
|
#endif
|
|
}
|
|
|
|
void lcd_quick_feedback(const bool clear_buttons) {
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
lcd_refresh();
|
|
if (clear_buttons) buttons = 0;
|
|
next_button_update_ms = millis() + 500;
|
|
#else
|
|
UNUSED(clear_buttons);
|
|
#endif
|
|
|
|
// Buzz and wait. The delay is needed for buttons to settle!
|
|
lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
#if ENABLED(LCD_USE_I2C_BUZZER)
|
|
delay(10);
|
|
#elif PIN_EXISTS(BEEPER)
|
|
for (int8_t i = 5; i--;) { buzzer.tick(); delay(2); }
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
|
|
void lcd_completion_feedback(const bool good/*=true*/) {
|
|
if (good) {
|
|
lcd_buzz(100, 659);
|
|
lcd_buzz(100, 698);
|
|
}
|
|
else lcd_buzz(20, 440);
|
|
}
|
|
|
|
inline void line_to_current_z() {
|
|
planner.buffer_line_kinematic(current_position, MMM_TO_MMS(manual_feedrate_mm_m[Z_AXIS]), active_extruder);
|
|
}
|
|
|
|
inline void line_to_z(const float &z) {
|
|
current_position[Z_AXIS] = z;
|
|
line_to_current_z();
|
|
}
|
|
|
|
#if ENABLED(SDSUPPORT)
|
|
|
|
void lcd_sdcard_pause() {
|
|
card.pauseSDPrint();
|
|
print_job_timer.pause();
|
|
#if ENABLED(PARK_HEAD_ON_PAUSE)
|
|
enqueue_and_echo_commands_P(PSTR("M125"));
|
|
#endif
|
|
lcd_reset_status();
|
|
}
|
|
|
|
void lcd_sdcard_resume() {
|
|
#if ENABLED(PARK_HEAD_ON_PAUSE)
|
|
enqueue_and_echo_commands_P(PSTR("M24"));
|
|
#else
|
|
card.startFileprint();
|
|
print_job_timer.start();
|
|
#endif
|
|
lcd_reset_status();
|
|
}
|
|
|
|
bool abort_sd_printing; // =false
|
|
|
|
void lcd_sdcard_stop() {
|
|
wait_for_heatup = wait_for_user = false;
|
|
abort_sd_printing = true;
|
|
lcd_setstatusPGM(PSTR(MSG_PRINT_ABORTED), -1);
|
|
lcd_return_to_status();
|
|
|
|
#if ENABLED(POWER_LOSS_RECOVERY)
|
|
card.openJobRecoveryFile(false);
|
|
job_recovery_info.valid_head = job_recovery_info.valid_foot = 0;
|
|
(void)card.saveJobRecoveryInfo();
|
|
card.closeJobRecoveryFile();
|
|
job_recovery_commands_count = 0;
|
|
#endif
|
|
}
|
|
|
|
#endif // SDSUPPORT
|
|
|
|
#if ENABLED(POWER_LOSS_RECOVERY)
|
|
|
|
static void lcd_sdcard_recover_job() {
|
|
char cmd[20];
|
|
|
|
// Return to status now
|
|
lcd_return_to_status();
|
|
|
|
// Turn leveling off and home
|
|
enqueue_and_echo_commands_P(PSTR("M420 S0\nG28"
|
|
#if !IS_KINEMATIC
|
|
" X Y"
|
|
#endif
|
|
));
|
|
|
|
#if HAS_HEATED_BED
|
|
// Restore the bed temperature
|
|
sprintf_P(cmd, PSTR("M190 S%i"), job_recovery_info.target_temperature_bed);
|
|
enqueue_and_echo_command(cmd);
|
|
#endif
|
|
|
|
// Restore all hotend temperatures
|
|
HOTEND_LOOP() {
|
|
sprintf_P(cmd, PSTR("M109 S%i"), job_recovery_info.target_temperature[e]);
|
|
enqueue_and_echo_command(cmd);
|
|
}
|
|
|
|
// Restore print cooling fan speeds
|
|
for (uint8_t i = 0; i < FAN_COUNT; i++) {
|
|
sprintf_P(cmd, PSTR("M106 P%i S%i"), i, job_recovery_info.fanSpeeds[i]);
|
|
enqueue_and_echo_command(cmd);
|
|
}
|
|
|
|
// Start draining the job recovery command queue
|
|
job_recovery_phase = JOB_RECOVERY_YES;
|
|
|
|
// Resume the print job timer
|
|
if (job_recovery_info.print_job_elapsed)
|
|
print_job_timer.resume(job_recovery_info.print_job_elapsed);
|
|
|
|
// Start getting commands from SD
|
|
card.startFileprint();
|
|
}
|
|
|
|
static void lcd_job_recovery_menu() {
|
|
defer_return_to_status = true;
|
|
START_MENU();
|
|
MENU_ITEM(function, MSG_RESUME_PRINT, lcd_sdcard_recover_job);
|
|
MENU_ITEM(function, MSG_STOP_PRINT, lcd_sdcard_stop);
|
|
END_MENU();
|
|
}
|
|
|
|
#endif // POWER_LOSS_RECOVERY
|
|
|
|
#if ENABLED(MENU_ITEM_CASE_LIGHT)
|
|
|
|
extern uint8_t case_light_brightness;
|
|
extern bool case_light_on;
|
|
extern void update_case_light();
|
|
|
|
void case_light_menu() {
|
|
START_MENU();
|
|
//
|
|
// ^ Main
|
|
//
|
|
MENU_BACK(MSG_MAIN);
|
|
MENU_ITEM_EDIT_CALLBACK(int8, MSG_CASE_LIGHT_BRIGHTNESS, &case_light_brightness, 0, 255, update_case_light, true);
|
|
MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light);
|
|
END_MENU();
|
|
}
|
|
#endif // MENU_ITEM_CASE_LIGHT
|
|
|
|
#if ENABLED(BLTOUCH)
|
|
|
|
/**
|
|
*
|
|
* "BLTouch" submenu
|
|
*
|
|
*/
|
|
static void bltouch_menu() {
|
|
START_MENU();
|
|
//
|
|
// ^ Main
|
|
//
|
|
MENU_BACK(MSG_MAIN);
|
|
MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET)));
|
|
MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST)));
|
|
MENU_ITEM(gcode, MSG_BLTOUCH_DEPLOY, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_DEPLOY)));
|
|
MENU_ITEM(gcode, MSG_BLTOUCH_STOW, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_STOW)));
|
|
END_MENU();
|
|
}
|
|
|
|
#endif // BLTOUCH
|
|
|
|
#if ENABLED(LCD_PROGRESS_BAR_TEST)
|
|
|
|
static void progress_bar_test() {
|
|
static int8_t bar_percent = 0;
|
|
if (use_click()) {
|
|
lcd_goto_previous_menu();
|
|
lcd_set_custom_characters(CHARSET_MENU);
|
|
return;
|
|
}
|
|
bar_percent += (int8_t)encoderPosition;
|
|
bar_percent = constrain(bar_percent, 0, 100);
|
|
encoderPosition = 0;
|
|
lcd_implementation_drawmenu_static(0, PSTR(MSG_PROGRESS_BAR_TEST), true, true);
|
|
lcd.setCursor((LCD_WIDTH) / 2 - 2, LCD_HEIGHT - 2);
|
|
lcd.print(itostr3(bar_percent)); lcd.write('%');
|
|
lcd.setCursor(0, LCD_HEIGHT - 1); lcd_draw_progress_bar(bar_percent);
|
|
}
|
|
|
|
void _progress_bar_test() {
|
|
lcd_goto_screen(progress_bar_test);
|
|
lcd_set_custom_characters();
|
|
}
|
|
|
|
#endif // LCD_PROGRESS_BAR_TEST
|
|
|
|
#if HAS_DEBUG_MENU
|
|
|
|
void lcd_debug_menu() {
|
|
START_MENU();
|
|
|
|
MENU_BACK(MSG_MAIN); // ^ Main
|
|
|
|
#if ENABLED(LCD_PROGRESS_BAR_TEST)
|
|
MENU_ITEM(submenu, MSG_PROGRESS_BAR_TEST, _progress_bar_test);
|
|
#endif
|
|
|
|
END_MENU();
|
|
}
|
|
|
|
#endif // HAS_DEBUG_MENU
|
|
|
|
#if ENABLED(CUSTOM_USER_MENUS)
|
|
|
|
#ifdef USER_SCRIPT_DONE
|
|
#define _DONE_SCRIPT "\n" USER_SCRIPT_DONE
|
|
#else
|
|
#define _DONE_SCRIPT ""
|
|
#endif
|
|
|
|
void _lcd_user_gcode(const char * const cmd) {
|
|
enqueue_and_echo_commands_P(cmd);
|
|
#if ENABLED(USER_SCRIPT_AUDIBLE_FEEDBACK)
|
|
lcd_completion_feedback();
|
|
#endif
|
|
#if ENABLED(USER_SCRIPT_RETURN)
|
|
lcd_return_to_status();
|
|
#endif
|
|
}
|
|
|
|
#if defined(USER_DESC_1) && defined(USER_GCODE_1)
|
|
void lcd_user_gcode_1() { _lcd_user_gcode(PSTR(USER_GCODE_1 _DONE_SCRIPT)); }
|
|
#endif
|
|
#if defined(USER_DESC_2) && defined(USER_GCODE_2)
|
|
void lcd_user_gcode_2() { _lcd_user_gcode(PSTR(USER_GCODE_2 _DONE_SCRIPT)); }
|
|
#endif
|
|
#if defined(USER_DESC_3) && defined(USER_GCODE_3)
|
|
void lcd_user_gcode_3() { _lcd_user_gcode(PSTR(USER_GCODE_3 _DONE_SCRIPT)); }
|
|
#endif
|
|
#if defined(USER_DESC_4) && defined(USER_GCODE_4)
|
|
void lcd_user_gcode_4() { _lcd_user_gcode(PSTR(USER_GCODE_4 _DONE_SCRIPT)); }
|
|
#endif
|
|
#if defined(USER_DESC_5) && defined(USER_GCODE_5)
|
|
void lcd_user_gcode_5() { _lcd_user_gcode(PSTR(USER_GCODE_5 _DONE_SCRIPT)); }
|
|
#endif
|
|
|
|
void _lcd_user_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_MAIN);
|
|
#if defined(USER_DESC_1) && defined(USER_GCODE_1)
|
|
MENU_ITEM(function, USER_DESC_1, lcd_user_gcode_1);
|
|
#endif
|
|
#if defined(USER_DESC_2) && defined(USER_GCODE_2)
|
|
MENU_ITEM(function, USER_DESC_2, lcd_user_gcode_2);
|
|
#endif
|
|
#if defined(USER_DESC_3) && defined(USER_GCODE_3)
|
|
MENU_ITEM(function, USER_DESC_3, lcd_user_gcode_3);
|
|
#endif
|
|
#if defined(USER_DESC_4) && defined(USER_GCODE_4)
|
|
MENU_ITEM(function, USER_DESC_4, lcd_user_gcode_4);
|
|
#endif
|
|
#if defined(USER_DESC_5) && defined(USER_GCODE_5)
|
|
MENU_ITEM(function, USER_DESC_5, lcd_user_gcode_5);
|
|
#endif
|
|
END_MENU();
|
|
}
|
|
|
|
#endif
|
|
|
|
/**
|
|
*
|
|
* "Main" menu
|
|
*
|
|
*/
|
|
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
void _lcd_goto_tune_menu() {
|
|
lcd_goto_screen(lcd_tune_menu);
|
|
new_z_fade_height = planner.z_fade_height;
|
|
}
|
|
#endif
|
|
|
|
void lcd_main_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_WATCH);
|
|
|
|
#if ENABLED(CUSTOM_USER_MENUS)
|
|
MENU_ITEM(submenu, MSG_USER_MENU, _lcd_user_menu);
|
|
#endif
|
|
|
|
//
|
|
// Debug Menu when certain options are enabled
|
|
//
|
|
#if HAS_DEBUG_MENU
|
|
MENU_ITEM(submenu, MSG_DEBUG_MENU, lcd_debug_menu);
|
|
#endif
|
|
|
|
//
|
|
// Set Case light on/off/brightness
|
|
//
|
|
#if ENABLED(MENU_ITEM_CASE_LIGHT)
|
|
if (USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) {
|
|
MENU_ITEM(submenu, MSG_CASE_LIGHT, case_light_menu);
|
|
}
|
|
else
|
|
MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light);
|
|
#endif
|
|
|
|
if (planner.movesplanned() || IS_SD_PRINTING) {
|
|
MENU_ITEM(submenu, MSG_TUNE,
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
_lcd_goto_tune_menu
|
|
#else
|
|
lcd_tune_menu
|
|
#endif
|
|
);
|
|
}
|
|
else {
|
|
MENU_ITEM(submenu, MSG_PREPARE, lcd_prepare_menu);
|
|
}
|
|
MENU_ITEM(submenu, MSG_CONTROL, lcd_control_menu);
|
|
|
|
#if ENABLED(SDSUPPORT)
|
|
if (card.cardOK) {
|
|
if (card.isFileOpen()) {
|
|
if (card.sdprinting)
|
|
MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause);
|
|
else
|
|
MENU_ITEM(function, MSG_RESUME_PRINT, lcd_sdcard_resume);
|
|
MENU_ITEM(function, MSG_STOP_PRINT, lcd_sdcard_stop);
|
|
}
|
|
else {
|
|
MENU_ITEM(submenu, MSG_CARD_MENU, lcd_sdcard_menu);
|
|
#if !PIN_EXISTS(SD_DETECT)
|
|
MENU_ITEM(gcode, MSG_CNG_SDCARD, PSTR("M21")); // SD-card changed by user
|
|
#endif
|
|
}
|
|
}
|
|
else {
|
|
MENU_ITEM(submenu, MSG_NO_CARD, lcd_sdcard_menu);
|
|
#if !PIN_EXISTS(SD_DETECT)
|
|
MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually initialize the SD-card via user interface
|
|
#endif
|
|
}
|
|
#endif // SDSUPPORT
|
|
|
|
#if ENABLED(LCD_INFO_MENU)
|
|
MENU_ITEM(submenu, MSG_INFO_MENU, lcd_info_menu);
|
|
#endif
|
|
|
|
#if ENABLED(LED_CONTROL_MENU)
|
|
MENU_ITEM(submenu, MSG_LED_CONTROL, lcd_led_menu);
|
|
#endif
|
|
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
*
|
|
* "Tune" submenu items
|
|
*
|
|
*/
|
|
|
|
#if HAS_M206_COMMAND
|
|
/**
|
|
* Set the home offset based on the current_position
|
|
*/
|
|
void lcd_set_home_offsets() {
|
|
// M428 Command
|
|
enqueue_and_echo_commands_P(PSTR("M428"));
|
|
lcd_return_to_status();
|
|
}
|
|
#endif
|
|
|
|
#if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) || ENABLED(MESH_EDIT_GFX_OVERLAY)
|
|
|
|
void _lcd_zoffset_overlay_gfx(const float zvalue) {
|
|
// Determine whether the user is raising or lowering the nozzle.
|
|
static int8_t dir;
|
|
static float old_zvalue;
|
|
if (zvalue != old_zvalue) {
|
|
dir = zvalue ? zvalue < old_zvalue ? -1 : 1 : 0;
|
|
old_zvalue = zvalue;
|
|
}
|
|
|
|
#if ENABLED(OVERLAY_GFX_REVERSE)
|
|
const unsigned char *rot_up = ccw_bmp, *rot_down = cw_bmp;
|
|
#else
|
|
const unsigned char *rot_up = cw_bmp, *rot_down = ccw_bmp;
|
|
#endif
|
|
|
|
#if ENABLED(USE_BIG_EDIT_FONT)
|
|
const int left = 0, right = 45, nozzle = 95;
|
|
#else
|
|
const int left = 5, right = 90, nozzle = 60;
|
|
#endif
|
|
|
|
// Draw a representation of the nozzle
|
|
if (PAGE_CONTAINS(3, 16)) u8g.drawBitmapP(nozzle + 6, 4 - dir, 2, 12, nozzle_bmp);
|
|
if (PAGE_CONTAINS(20, 20)) u8g.drawBitmapP(nozzle + 0, 20, 3, 1, offset_bedline_bmp);
|
|
|
|
// Draw cw/ccw indicator and up/down arrows.
|
|
if (PAGE_CONTAINS(47, 62)) {
|
|
u8g.drawBitmapP(left + 0, 47, 3, 16, rot_down);
|
|
u8g.drawBitmapP(right + 0, 47, 3, 16, rot_up);
|
|
u8g.drawBitmapP(right + 20, 48 - dir, 2, 13, up_arrow_bmp);
|
|
u8g.drawBitmapP(left + 20, 49 - dir, 2, 13, down_arrow_bmp);
|
|
}
|
|
}
|
|
|
|
#endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY
|
|
|
|
#if ENABLED(BABYSTEPPING)
|
|
|
|
void _lcd_babystep(const AxisEnum axis, const char* msg) {
|
|
if (use_click()) { return lcd_goto_previous_menu_no_defer(); }
|
|
ENCODER_DIRECTION_NORMAL();
|
|
if (encoderPosition) {
|
|
const int16_t babystep_increment = (int32_t)encoderPosition * (BABYSTEP_MULTIPLICATOR);
|
|
encoderPosition = 0;
|
|
lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
|
|
thermalManager.babystep_axis(axis, babystep_increment);
|
|
babysteps_done += babystep_increment;
|
|
}
|
|
if (lcdDrawUpdate)
|
|
lcd_implementation_drawedit(msg, ftostr43sign(planner.steps_to_mm[axis] * babysteps_done));
|
|
}
|
|
|
|
#if ENABLED(BABYSTEP_XY)
|
|
void _lcd_babystep_x() { _lcd_babystep(X_AXIS, PSTR(MSG_BABYSTEP_X)); }
|
|
void _lcd_babystep_y() { _lcd_babystep(Y_AXIS, PSTR(MSG_BABYSTEP_Y)); }
|
|
void lcd_babystep_x() { lcd_goto_screen(_lcd_babystep_x); babysteps_done = 0; defer_return_to_status = true; }
|
|
void lcd_babystep_y() { lcd_goto_screen(_lcd_babystep_y); babysteps_done = 0; defer_return_to_status = true; }
|
|
#endif
|
|
|
|
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
|
|
|
void lcd_babystep_zoffset() {
|
|
if (use_click()) { return lcd_goto_previous_menu_no_defer(); }
|
|
defer_return_to_status = true;
|
|
ENCODER_DIRECTION_NORMAL();
|
|
if (encoderPosition) {
|
|
const int16_t babystep_increment = (int32_t)encoderPosition * (BABYSTEP_MULTIPLICATOR);
|
|
encoderPosition = 0;
|
|
|
|
const float new_zoffset = zprobe_zoffset + planner.steps_to_mm[Z_AXIS] * babystep_increment;
|
|
if (WITHIN(new_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) {
|
|
thermalManager.babystep_axis(Z_AXIS, babystep_increment);
|
|
zprobe_zoffset = new_zoffset;
|
|
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
|
|
}
|
|
}
|
|
if (lcdDrawUpdate) {
|
|
lcd_implementation_drawedit(PSTR(MSG_ZPROBE_ZOFFSET), ftostr43sign(zprobe_zoffset));
|
|
#if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY)
|
|
_lcd_zoffset_overlay_gfx(zprobe_zoffset);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#else // !BABYSTEP_ZPROBE_OFFSET
|
|
|
|
void _lcd_babystep_z() { _lcd_babystep(Z_AXIS, PSTR(MSG_BABYSTEP_Z)); }
|
|
void lcd_babystep_z() { lcd_goto_screen(_lcd_babystep_z); babysteps_done = 0; defer_return_to_status = true; }
|
|
|
|
#endif // !BABYSTEP_ZPROBE_OFFSET
|
|
|
|
#endif // BABYSTEPPING
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
|
|
|
float mesh_edit_value, mesh_edit_accumulator; // We round mesh_edit_value to 2.5 decimal places. So we keep a
|
|
// separate value that doesn't lose precision.
|
|
static int16_t ubl_encoderPosition = 0;
|
|
|
|
static void _lcd_mesh_fine_tune(const char* msg) {
|
|
defer_return_to_status = true;
|
|
if (ubl.encoder_diff) {
|
|
ubl_encoderPosition = (ubl.encoder_diff > 0) ? 1 : -1;
|
|
ubl.encoder_diff = 0;
|
|
|
|
mesh_edit_accumulator += float(ubl_encoderPosition) * 0.005 / 2.0;
|
|
mesh_edit_value = mesh_edit_accumulator;
|
|
encoderPosition = 0;
|
|
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
|
|
|
|
const int32_t rounded = (int32_t)(mesh_edit_value * 1000.0);
|
|
mesh_edit_value = float(rounded - (rounded % 5L)) / 1000.0;
|
|
}
|
|
|
|
if (lcdDrawUpdate) {
|
|
lcd_implementation_drawedit(msg, ftostr43sign(mesh_edit_value));
|
|
#if ENABLED(MESH_EDIT_GFX_OVERLAY)
|
|
_lcd_zoffset_overlay_gfx(mesh_edit_value);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void _lcd_mesh_edit_NOP() {
|
|
defer_return_to_status = true;
|
|
}
|
|
|
|
float lcd_mesh_edit() {
|
|
lcd_goto_screen(_lcd_mesh_edit_NOP);
|
|
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
|
|
_lcd_mesh_fine_tune(PSTR("Mesh Editor"));
|
|
return mesh_edit_value;
|
|
}
|
|
|
|
void lcd_mesh_edit_setup(const float &initial) {
|
|
mesh_edit_value = mesh_edit_accumulator = initial;
|
|
lcd_goto_screen(_lcd_mesh_edit_NOP);
|
|
}
|
|
|
|
void _lcd_z_offset_edit() {
|
|
_lcd_mesh_fine_tune(PSTR("Z-Offset: "));
|
|
}
|
|
|
|
float lcd_z_offset_edit() {
|
|
lcd_goto_screen(_lcd_z_offset_edit);
|
|
return mesh_edit_value;
|
|
}
|
|
|
|
void lcd_z_offset_edit_setup(const float &initial) {
|
|
mesh_edit_value = mesh_edit_accumulator = initial;
|
|
lcd_goto_screen(_lcd_z_offset_edit);
|
|
}
|
|
|
|
#endif // AUTO_BED_LEVELING_UBL
|
|
|
|
|
|
/**
|
|
* Watch temperature callbacks
|
|
*/
|
|
#if HAS_TEMP_HOTEND
|
|
#if WATCH_HOTENDS
|
|
#define _WATCH_FUNC(N) thermalManager.start_watching_heater(N)
|
|
#else
|
|
#define _WATCH_FUNC(N) NOOP
|
|
#endif
|
|
void watch_temp_callback_E0() { _WATCH_FUNC(0); }
|
|
#if HOTENDS > 1
|
|
void watch_temp_callback_E1() { _WATCH_FUNC(1); }
|
|
#if HOTENDS > 2
|
|
void watch_temp_callback_E2() { _WATCH_FUNC(2); }
|
|
#if HOTENDS > 3
|
|
void watch_temp_callback_E3() { _WATCH_FUNC(3); }
|
|
#if HOTENDS > 4
|
|
void watch_temp_callback_E4() { _WATCH_FUNC(4); }
|
|
#endif // HOTENDS > 4
|
|
#endif // HOTENDS > 3
|
|
#endif // HOTENDS > 2
|
|
#endif // HOTENDS > 1
|
|
#endif // HAS_TEMP_HOTEND
|
|
|
|
void watch_temp_callback_bed() {
|
|
#if WATCH_THE_BED
|
|
thermalManager.start_watching_bed();
|
|
#endif
|
|
}
|
|
|
|
// First Fan Speed title in "Tune" and "Control>Temperature" menus
|
|
#if FAN_COUNT > 0 && HAS_FAN0
|
|
#if FAN_COUNT > 1
|
|
#define FAN_SPEED_1_SUFFIX " 1"
|
|
#else
|
|
#define FAN_SPEED_1_SUFFIX ""
|
|
#endif
|
|
#endif
|
|
|
|
// Refresh the E factor after changing flow
|
|
inline void _lcd_refresh_e_factor_0() { planner.refresh_e_factor(0); }
|
|
#if EXTRUDERS > 1
|
|
inline void _lcd_refresh_e_factor() { planner.refresh_e_factor(active_extruder); }
|
|
inline void _lcd_refresh_e_factor_1() { planner.refresh_e_factor(1); }
|
|
#if EXTRUDERS > 2
|
|
inline void _lcd_refresh_e_factor_2() { planner.refresh_e_factor(2); }
|
|
#if EXTRUDERS > 3
|
|
inline void _lcd_refresh_e_factor_3() { planner.refresh_e_factor(3); }
|
|
#if EXTRUDERS > 4
|
|
inline void _lcd_refresh_e_factor_4() { planner.refresh_e_factor(4); }
|
|
#endif // EXTRUDERS > 4
|
|
#endif // EXTRUDERS > 3
|
|
#endif // EXTRUDERS > 2
|
|
#endif // EXTRUDERS > 1
|
|
|
|
/**
|
|
*
|
|
* "Tune" submenu
|
|
*
|
|
*/
|
|
void lcd_tune_menu() {
|
|
START_MENU();
|
|
|
|
//
|
|
// ^ Main
|
|
//
|
|
MENU_BACK(MSG_MAIN);
|
|
|
|
//
|
|
// Speed:
|
|
//
|
|
MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999);
|
|
|
|
//
|
|
// Manual bed leveling, Bed Z:
|
|
//
|
|
#if ENABLED(MESH_BED_LEVELING) && ENABLED(LCD_BED_LEVELING)
|
|
MENU_ITEM_EDIT(float43, MSG_BED_Z, &mbl.z_offset, -1, 1);
|
|
#endif
|
|
|
|
//
|
|
// Leveling Fade Height
|
|
//
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(SLIM_LCD_MENUS)
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0.0, 100.0, _lcd_set_z_fade_height);
|
|
#endif
|
|
|
|
//
|
|
// Nozzle:
|
|
// Nozzle [1-4]:
|
|
//
|
|
#if HOTENDS == 1
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
|
|
#else // HOTENDS > 1
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N1, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N2, &thermalManager.target_temperature[1], 0, HEATER_1_MAXTEMP - 15, watch_temp_callback_E1);
|
|
#if HOTENDS > 2
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N3, &thermalManager.target_temperature[2], 0, HEATER_2_MAXTEMP - 15, watch_temp_callback_E2);
|
|
#if HOTENDS > 3
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N4, &thermalManager.target_temperature[3], 0, HEATER_3_MAXTEMP - 15, watch_temp_callback_E3);
|
|
#if HOTENDS > 4
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N5, &thermalManager.target_temperature[4], 0, HEATER_4_MAXTEMP - 15, watch_temp_callback_E4);
|
|
#endif // HOTENDS > 4
|
|
#endif // HOTENDS > 3
|
|
#endif // HOTENDS > 2
|
|
#endif // HOTENDS > 1
|
|
|
|
//
|
|
// Bed:
|
|
//
|
|
#if HAS_HEATED_BED
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_BED, &thermalManager.target_temperature_bed, 0, BED_MAXTEMP - 15, watch_temp_callback_bed);
|
|
#endif
|
|
|
|
//
|
|
// Fan Speed:
|
|
//
|
|
#if FAN_COUNT > 0
|
|
#if HAS_FAN0
|
|
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fanSpeeds[0], 0, 255);
|
|
#if ENABLED(EXTRA_FAN_SPEED)
|
|
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fanSpeeds[0], 3, 255);
|
|
#endif
|
|
#endif
|
|
#if HAS_FAN1
|
|
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255);
|
|
#if ENABLED(EXTRA_FAN_SPEED)
|
|
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 2", &new_fanSpeeds[1], 3, 255);
|
|
#endif
|
|
#endif
|
|
#if HAS_FAN2
|
|
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 3", &fanSpeeds[2], 0, 255);
|
|
#if ENABLED(EXTRA_FAN_SPEED)
|
|
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 3", &new_fanSpeeds[2], 3, 255);
|
|
#endif
|
|
#endif
|
|
#endif // FAN_COUNT > 0
|
|
|
|
//
|
|
// Flow:
|
|
// Flow [1-5]:
|
|
//
|
|
#if EXTRUDERS == 1
|
|
MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW, &planner.flow_percentage[0], 10, 999, _lcd_refresh_e_factor_0);
|
|
#else // EXTRUDERS > 1
|
|
MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW, &planner.flow_percentage[active_extruder], 10, 999, _lcd_refresh_e_factor);
|
|
MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW MSG_N1, &planner.flow_percentage[0], 10, 999, _lcd_refresh_e_factor_0);
|
|
MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW MSG_N2, &planner.flow_percentage[1], 10, 999, _lcd_refresh_e_factor_1);
|
|
#if EXTRUDERS > 2
|
|
MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW MSG_N3, &planner.flow_percentage[2], 10, 999, _lcd_refresh_e_factor_2);
|
|
#if EXTRUDERS > 3
|
|
MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW MSG_N4, &planner.flow_percentage[3], 10, 999, _lcd_refresh_e_factor_3);
|
|
#if EXTRUDERS > 4
|
|
MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW MSG_N5, &planner.flow_percentage[4], 10, 999, _lcd_refresh_e_factor_4);
|
|
#endif // EXTRUDERS > 4
|
|
#endif // EXTRUDERS > 3
|
|
#endif // EXTRUDERS > 2
|
|
#endif // EXTRUDERS > 1
|
|
|
|
//
|
|
// Babystep X:
|
|
// Babystep Y:
|
|
// Babystep Z:
|
|
//
|
|
#if ENABLED(BABYSTEPPING)
|
|
#if ENABLED(BABYSTEP_XY)
|
|
MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x);
|
|
MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y);
|
|
#endif
|
|
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
|
MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset);
|
|
#else
|
|
MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z);
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// Change filament
|
|
//
|
|
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
#if E_STEPPERS == 1 && !ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
|
if (thermalManager.targetHotEnoughToExtrude(active_extruder))
|
|
MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
|
|
else
|
|
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_temp_menu_e0_filament_change);
|
|
#else
|
|
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_change_filament_menu);
|
|
#endif
|
|
#endif
|
|
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
*
|
|
* "Driver current control" submenu items
|
|
*
|
|
*/
|
|
#if ENABLED(DAC_STEPPER_CURRENT)
|
|
|
|
void dac_driver_getValues() { LOOP_XYZE(i) driverPercent[i] = dac_current_get_percent((AxisEnum)i); }
|
|
|
|
void dac_driver_commit() { dac_current_set_percents(driverPercent); }
|
|
|
|
void dac_driver_eeprom_write() { dac_commit_eeprom(); }
|
|
|
|
void lcd_dac_menu() {
|
|
dac_driver_getValues();
|
|
START_MENU();
|
|
MENU_BACK(MSG_CONTROL);
|
|
MENU_ITEM_EDIT_CALLBACK(int8, MSG_X " " MSG_DAC_PERCENT, &driverPercent[X_AXIS], 0, 100, dac_driver_commit);
|
|
MENU_ITEM_EDIT_CALLBACK(int8, MSG_Y " " MSG_DAC_PERCENT, &driverPercent[Y_AXIS], 0, 100, dac_driver_commit);
|
|
MENU_ITEM_EDIT_CALLBACK(int8, MSG_Z " " MSG_DAC_PERCENT, &driverPercent[Z_AXIS], 0, 100, dac_driver_commit);
|
|
MENU_ITEM_EDIT_CALLBACK(int8, MSG_E " " MSG_DAC_PERCENT, &driverPercent[E_AXIS], 0, 100, dac_driver_commit);
|
|
MENU_ITEM(function, MSG_DAC_EEPROM_WRITE, dac_driver_eeprom_write);
|
|
END_MENU();
|
|
}
|
|
|
|
#endif // DAC_STEPPER_CURRENT
|
|
|
|
#if HAS_MOTOR_CURRENT_PWM
|
|
|
|
void lcd_pwm_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_CONTROL);
|
|
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_X MSG_Y, &stepper.motor_current_setting[0], 100, 2000, Stepper::refresh_motor_power);
|
|
#endif
|
|
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_Z, &stepper.motor_current_setting[1], 100, 2000, Stepper::refresh_motor_power);
|
|
#endif
|
|
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_E, &stepper.motor_current_setting[2], 100, 2000, Stepper::refresh_motor_power);
|
|
#endif
|
|
END_MENU();
|
|
}
|
|
|
|
#endif // HAS_MOTOR_CURRENT_PWM
|
|
|
|
constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP);
|
|
|
|
/**
|
|
*
|
|
* "Prepare" submenu items
|
|
*
|
|
*/
|
|
void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb, const int16_t fan) {
|
|
if (temph > 0) thermalManager.setTargetHotend(min(heater_maxtemp[endnum], temph), endnum);
|
|
#if HAS_HEATED_BED
|
|
if (tempb >= 0) thermalManager.setTargetBed(tempb);
|
|
#else
|
|
UNUSED(tempb);
|
|
#endif
|
|
#if FAN_COUNT > 0
|
|
#if FAN_COUNT > 1
|
|
fanSpeeds[active_extruder < FAN_COUNT ? active_extruder : 0] = fan;
|
|
#else
|
|
fanSpeeds[0] = fan;
|
|
#endif
|
|
#else
|
|
UNUSED(fan);
|
|
#endif
|
|
lcd_return_to_status();
|
|
}
|
|
|
|
#if HAS_TEMP_HOTEND
|
|
void lcd_preheat_m1_e0_only() { _lcd_preheat(0, lcd_preheat_hotend_temp[0], -1, lcd_preheat_fan_speed[0]); }
|
|
void lcd_preheat_m2_e0_only() { _lcd_preheat(0, lcd_preheat_hotend_temp[1], -1, lcd_preheat_fan_speed[1]); }
|
|
#if HAS_HEATED_BED
|
|
void lcd_preheat_m1_e0() { _lcd_preheat(0, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
|
|
void lcd_preheat_m2_e0() { _lcd_preheat(0, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
|
|
#endif
|
|
#endif
|
|
|
|
#if HOTENDS > 1
|
|
void lcd_preheat_m1_e1_only() { _lcd_preheat(1, lcd_preheat_hotend_temp[0], -1, lcd_preheat_fan_speed[0]); }
|
|
void lcd_preheat_m2_e1_only() { _lcd_preheat(1, lcd_preheat_hotend_temp[1], -1, lcd_preheat_fan_speed[1]); }
|
|
#if HAS_HEATED_BED
|
|
void lcd_preheat_m1_e1() { _lcd_preheat(1, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
|
|
void lcd_preheat_m2_e1() { _lcd_preheat(1, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
|
|
#endif
|
|
#if HOTENDS > 2
|
|
void lcd_preheat_m1_e2_only() { _lcd_preheat(2, lcd_preheat_hotend_temp[0], -1, lcd_preheat_fan_speed[0]); }
|
|
void lcd_preheat_m2_e2_only() { _lcd_preheat(2, lcd_preheat_hotend_temp[1], -1, lcd_preheat_fan_speed[1]); }
|
|
#if HAS_HEATED_BED
|
|
void lcd_preheat_m1_e2() { _lcd_preheat(2, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
|
|
void lcd_preheat_m2_e2() { _lcd_preheat(2, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
|
|
#endif
|
|
#if HOTENDS > 3
|
|
void lcd_preheat_m1_e3_only() { _lcd_preheat(3, lcd_preheat_hotend_temp[0], -1, lcd_preheat_fan_speed[0]); }
|
|
void lcd_preheat_m2_e3_only() { _lcd_preheat(3, lcd_preheat_hotend_temp[1], -1, lcd_preheat_fan_speed[1]); }
|
|
#if HAS_HEATED_BED
|
|
void lcd_preheat_m1_e3() { _lcd_preheat(3, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
|
|
void lcd_preheat_m2_e3() { _lcd_preheat(3, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
|
|
#endif
|
|
#if HOTENDS > 4
|
|
void lcd_preheat_m1_e4_only() { _lcd_preheat(4, lcd_preheat_hotend_temp[0], -1, lcd_preheat_fan_speed[0]); }
|
|
void lcd_preheat_m2_e4_only() { _lcd_preheat(4, lcd_preheat_hotend_temp[1], -1, lcd_preheat_fan_speed[1]); }
|
|
#if HAS_HEATED_BED
|
|
void lcd_preheat_m1_e4() { _lcd_preheat(4, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
|
|
void lcd_preheat_m2_e4() { _lcd_preheat(4, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
|
|
#endif
|
|
#endif // HOTENDS > 4
|
|
#endif // HOTENDS > 3
|
|
#endif // HOTENDS > 2
|
|
|
|
void lcd_preheat_m1_all() {
|
|
#if HOTENDS > 1
|
|
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 1);
|
|
#if HOTENDS > 2
|
|
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 2);
|
|
#if HOTENDS > 3
|
|
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 3);
|
|
#if HOTENDS > 4
|
|
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 4);
|
|
#endif // HOTENDS > 4
|
|
#endif // HOTENDS > 3
|
|
#endif // HOTENDS > 2
|
|
#endif // HOTENDS > 1
|
|
#if HAS_HEATED_BED
|
|
lcd_preheat_m1_e0();
|
|
#else
|
|
lcd_preheat_m1_e0_only();
|
|
#endif
|
|
}
|
|
void lcd_preheat_m2_all() {
|
|
#if HOTENDS > 1
|
|
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 1);
|
|
#if HOTENDS > 2
|
|
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 2);
|
|
#if HOTENDS > 3
|
|
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 3);
|
|
#if HOTENDS > 4
|
|
thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 4);
|
|
#endif // HOTENDS > 4
|
|
#endif // HOTENDS > 3
|
|
#endif // HOTENDS > 2
|
|
#endif // HOTENDS > 1
|
|
#if HAS_HEATED_BED
|
|
lcd_preheat_m2_e0();
|
|
#else
|
|
lcd_preheat_m2_e0_only();
|
|
#endif
|
|
}
|
|
|
|
#endif // HOTENDS > 1
|
|
|
|
#if HAS_HEATED_BED
|
|
void lcd_preheat_m1_bedonly() { _lcd_preheat(0, 0, lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); }
|
|
void lcd_preheat_m2_bedonly() { _lcd_preheat(0, 0, lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); }
|
|
#endif
|
|
|
|
#if HAS_TEMP_HOTEND && (TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || HAS_HEATED_BED)
|
|
|
|
void lcd_preheat_m1_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_PREPARE);
|
|
#if HOTENDS == 1
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0);
|
|
MENU_ITEM(function, MSG_PREHEAT_1_END, lcd_preheat_m1_e0_only);
|
|
#else
|
|
MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0_only);
|
|
#endif
|
|
#else
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H1, lcd_preheat_m1_e0);
|
|
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E1, lcd_preheat_m1_e0_only);
|
|
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H2, lcd_preheat_m1_e1);
|
|
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E2, lcd_preheat_m1_e1_only);
|
|
#else
|
|
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H1, lcd_preheat_m1_e0_only);
|
|
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H2, lcd_preheat_m1_e1_only);
|
|
#endif
|
|
#if HOTENDS > 2
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2);
|
|
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E3, lcd_preheat_m1_e2_only);
|
|
#else
|
|
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2_only);
|
|
#endif
|
|
#if HOTENDS > 3
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3);
|
|
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E4, lcd_preheat_m1_e3_only);
|
|
#else
|
|
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3_only);
|
|
#endif
|
|
#if HOTENDS > 4
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H5, lcd_preheat_m1_e4);
|
|
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E5, lcd_preheat_m1_e4_only);
|
|
#else
|
|
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H5, lcd_preheat_m1_e4_only);
|
|
#endif
|
|
#endif // HOTENDS > 4
|
|
#endif // HOTENDS > 3
|
|
#endif // HOTENDS > 2
|
|
MENU_ITEM(function, MSG_PREHEAT_1_ALL, lcd_preheat_m1_all);
|
|
#endif // HOTENDS > 1
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(function, MSG_PREHEAT_1_BEDONLY, lcd_preheat_m1_bedonly);
|
|
#endif
|
|
END_MENU();
|
|
}
|
|
|
|
void lcd_preheat_m2_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_PREPARE);
|
|
#if HOTENDS == 1
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0);
|
|
MENU_ITEM(function, MSG_PREHEAT_2_END, lcd_preheat_m2_e0_only);
|
|
#else
|
|
MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only);
|
|
#endif
|
|
#else
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0);
|
|
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E1, lcd_preheat_m2_e0_only);
|
|
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1);
|
|
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E2, lcd_preheat_m2_e1_only);
|
|
#else
|
|
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0_only);
|
|
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1_only);
|
|
#endif
|
|
#if HOTENDS > 2
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2);
|
|
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E3, lcd_preheat_m2_e2_only);
|
|
#else
|
|
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2_only);
|
|
#endif
|
|
#if HOTENDS > 3
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3);
|
|
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E4, lcd_preheat_m2_e3_only);
|
|
#else
|
|
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3_only);
|
|
#endif
|
|
#if HOTENDS > 4
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4);
|
|
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E5, lcd_preheat_m2_e4_only);
|
|
#else
|
|
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4_only);
|
|
#endif
|
|
#endif // HOTENDS > 4
|
|
#endif // HOTENDS > 3
|
|
#endif // HOTENDS > 2
|
|
MENU_ITEM(function, MSG_PREHEAT_2_ALL, lcd_preheat_m2_all);
|
|
#endif // HOTENDS > 1
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(function, MSG_PREHEAT_2_BEDONLY, lcd_preheat_m2_bedonly);
|
|
#endif
|
|
END_MENU();
|
|
}
|
|
|
|
#endif // TEMP_SENSOR_0 && (TEMP_SENSOR_1 || TEMP_SENSOR_2 || TEMP_SENSOR_3 || TEMP_SENSOR_4 || TEMP_SENSOR_BED)
|
|
|
|
void lcd_cooldown() {
|
|
#if FAN_COUNT > 0
|
|
for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0;
|
|
#endif
|
|
thermalManager.disable_all_heaters();
|
|
lcd_return_to_status();
|
|
}
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
|
|
/**
|
|
* If the queue is full, the command will fail, so we have to loop
|
|
* with idle() to make sure the command has been enqueued.
|
|
*/
|
|
void lcd_enqueue_command(char * const cmd) {
|
|
no_reentry = true;
|
|
enqueue_and_echo_command_now(cmd);
|
|
no_reentry = false;
|
|
}
|
|
|
|
void lcd_enqueue_commands_P(const char * const cmd) {
|
|
no_reentry = true;
|
|
enqueue_and_echo_commands_now_P(cmd);
|
|
no_reentry = false;
|
|
}
|
|
|
|
#endif
|
|
|
|
#if ENABLED(SDSUPPORT) && ENABLED(MENU_ADDAUTOSTART)
|
|
|
|
void lcd_autostart_sd() { card.beginautostart(); }
|
|
|
|
#endif
|
|
|
|
#if ENABLED(EEPROM_SETTINGS)
|
|
static void lcd_store_settings() { lcd_completion_feedback(settings.save()); }
|
|
static void lcd_load_settings() { lcd_completion_feedback(settings.load()); }
|
|
#endif
|
|
|
|
#if ENABLED(LEVEL_BED_CORNERS)
|
|
|
|
/**
|
|
* Level corners, starting in the front-left corner.
|
|
*/
|
|
static int8_t bed_corner;
|
|
void _lcd_goto_next_corner() {
|
|
line_to_z(4.0);
|
|
switch (bed_corner) {
|
|
case 0:
|
|
current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET;
|
|
current_position[Y_AXIS] = Y_MIN_BED + LEVEL_CORNERS_INSET;
|
|
break;
|
|
case 1:
|
|
current_position[X_AXIS] = X_MAX_BED - LEVEL_CORNERS_INSET;
|
|
break;
|
|
case 2:
|
|
current_position[Y_AXIS] = Y_MAX_BED - LEVEL_CORNERS_INSET;
|
|
break;
|
|
case 3:
|
|
current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET;
|
|
break;
|
|
#if ENABLED(LEVEL_CENTER_TOO)
|
|
case 4:
|
|
current_position[X_AXIS] = X_CENTER;
|
|
current_position[Y_AXIS] = Y_CENTER;
|
|
break;
|
|
#endif
|
|
}
|
|
planner.buffer_line_kinematic(current_position, MMM_TO_MMS(manual_feedrate_mm_m[X_AXIS]), active_extruder);
|
|
line_to_z(0.0);
|
|
if (++bed_corner > 3
|
|
#if ENABLED(LEVEL_CENTER_TOO)
|
|
+ 1
|
|
#endif
|
|
) bed_corner = 0;
|
|
}
|
|
|
|
void _lcd_corner_submenu() {
|
|
START_MENU();
|
|
MENU_ITEM(function,
|
|
#if ENABLED(LEVEL_CENTER_TOO)
|
|
MSG_LEVEL_BED_NEXT_POINT
|
|
#else
|
|
MSG_NEXT_CORNER
|
|
#endif
|
|
, _lcd_goto_next_corner);
|
|
MENU_ITEM(function, MSG_BACK, lcd_goto_previous_menu_no_defer);
|
|
END_MENU();
|
|
}
|
|
|
|
void _lcd_level_bed_corners() {
|
|
defer_return_to_status = true;
|
|
lcd_goto_screen(_lcd_corner_submenu);
|
|
bed_corner = 0;
|
|
_lcd_goto_next_corner();
|
|
}
|
|
|
|
#endif // LEVEL_BED_CORNERS
|
|
|
|
#if ENABLED(LCD_BED_LEVELING) && (ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING))
|
|
|
|
/**
|
|
*
|
|
* "Prepare" > "Level Bed" handlers
|
|
*
|
|
*/
|
|
|
|
static uint8_t manual_probe_index;
|
|
|
|
// LCD probed points are from defaults
|
|
constexpr uint8_t total_probe_points = (
|
|
#if ENABLED(AUTO_BED_LEVELING_3POINT)
|
|
3
|
|
#elif ABL_GRID || ENABLED(MESH_BED_LEVELING)
|
|
GRID_MAX_POINTS
|
|
#endif
|
|
);
|
|
|
|
bool lcd_wait_for_move;
|
|
|
|
//
|
|
// Bed leveling is done. Wait for G29 to complete.
|
|
// A flag is used so that this can release control
|
|
// and allow the command queue to be processed.
|
|
//
|
|
// When G29 finishes the last move:
|
|
// - Raise Z to the "manual probe height"
|
|
// - Don't return until done.
|
|
//
|
|
// ** This blocks the command queue! **
|
|
//
|
|
void _lcd_level_bed_done() {
|
|
if (!lcd_wait_for_move) {
|
|
#if MANUAL_PROBE_HEIGHT > 0 && DISABLED(MESH_BED_LEVELING)
|
|
// Display "Done" screen and wait for moves to complete
|
|
line_to_z(MANUAL_PROBE_HEIGHT);
|
|
lcd_synchronize(PSTR(MSG_LEVEL_BED_DONE));
|
|
#endif
|
|
lcd_goto_previous_menu_no_defer();
|
|
lcd_completion_feedback();
|
|
}
|
|
if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT >= 4 ? 1 : 0, PSTR(MSG_LEVEL_BED_DONE));
|
|
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
|
|
}
|
|
|
|
void _lcd_level_goto_next_point();
|
|
|
|
/**
|
|
* Step 7: Get the Z coordinate, click goes to the next point or exits
|
|
*/
|
|
void _lcd_level_bed_get_z() {
|
|
ENCODER_DIRECTION_NORMAL();
|
|
|
|
if (use_click()) {
|
|
|
|
//
|
|
// Save the current Z position and move
|
|
//
|
|
|
|
// If done...
|
|
if (++manual_probe_index >= total_probe_points) {
|
|
//
|
|
// The last G29 records the point and enables bed leveling
|
|
//
|
|
lcd_wait_for_move = true;
|
|
lcd_goto_screen(_lcd_level_bed_done);
|
|
#if ENABLED(MESH_BED_LEVELING)
|
|
enqueue_and_echo_commands_P(PSTR("G29 S2"));
|
|
#elif ENABLED(PROBE_MANUALLY)
|
|
enqueue_and_echo_commands_P(PSTR("G29 V1"));
|
|
#endif
|
|
}
|
|
else
|
|
_lcd_level_goto_next_point();
|
|
|
|
return;
|
|
}
|
|
|
|
//
|
|
// Encoder knob or keypad buttons adjust the Z position
|
|
//
|
|
if (encoderPosition) {
|
|
const float z = current_position[Z_AXIS] + float((int32_t)encoderPosition) * (MBL_Z_STEP);
|
|
line_to_z(constrain(z, -(LCD_PROBE_Z_RANGE) * 0.5, (LCD_PROBE_Z_RANGE) * 0.5));
|
|
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
|
|
encoderPosition = 0;
|
|
}
|
|
|
|
//
|
|
// Draw on first display, then only on Z change
|
|
//
|
|
if (lcdDrawUpdate) {
|
|
const float v = current_position[Z_AXIS];
|
|
lcd_implementation_drawedit(PSTR(MSG_MOVE_Z), ftostr43sign(v + (v < 0 ? -0.0001 : 0.0001), '+'));
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Step 6: Display "Next point: 1 / 9" while waiting for move to finish
|
|
*/
|
|
void _lcd_level_bed_moving() {
|
|
if (lcdDrawUpdate) {
|
|
char msg[10];
|
|
sprintf_P(msg, PSTR("%i / %u"), (int)(manual_probe_index + 1), total_probe_points);
|
|
lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_NEXT_POINT), msg);
|
|
}
|
|
lcdDrawUpdate = LCDVIEW_CALL_NO_REDRAW;
|
|
if (!lcd_wait_for_move) lcd_goto_screen(_lcd_level_bed_get_z);
|
|
}
|
|
|
|
/**
|
|
* Step 5: Initiate a move to the next point
|
|
*/
|
|
void _lcd_level_goto_next_point() {
|
|
lcd_goto_screen(_lcd_level_bed_moving);
|
|
|
|
// G29 Records Z, moves, and signals when it pauses
|
|
lcd_wait_for_move = true;
|
|
#if ENABLED(MESH_BED_LEVELING)
|
|
enqueue_and_echo_commands_P(manual_probe_index ? PSTR("G29 S2") : PSTR("G29 S1"));
|
|
#elif ENABLED(PROBE_MANUALLY)
|
|
enqueue_and_echo_commands_P(PSTR("G29 V1"));
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* Step 4: Display "Click to Begin", wait for click
|
|
* Move to the first probe position
|
|
*/
|
|
void _lcd_level_bed_homing_done() {
|
|
if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_WAITING));
|
|
if (use_click()) {
|
|
manual_probe_index = 0;
|
|
_lcd_level_goto_next_point();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Step 3: Display "Homing XYZ" - Wait for homing to finish
|
|
*/
|
|
void _lcd_level_bed_homing() {
|
|
if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_HOMING), NULL);
|
|
lcdDrawUpdate = LCDVIEW_CALL_NO_REDRAW;
|
|
if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS])
|
|
lcd_goto_screen(_lcd_level_bed_homing_done);
|
|
}
|
|
|
|
#if ENABLED(PROBE_MANUALLY)
|
|
extern bool g29_in_progress;
|
|
#endif
|
|
|
|
/**
|
|
* Step 2: Continue Bed Leveling...
|
|
*/
|
|
void _lcd_level_bed_continue() {
|
|
defer_return_to_status = true;
|
|
axis_homed[X_AXIS] = axis_homed[Y_AXIS] = axis_homed[Z_AXIS] = false;
|
|
lcd_goto_screen(_lcd_level_bed_homing);
|
|
enqueue_and_echo_commands_P(PSTR("G28"));
|
|
}
|
|
|
|
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
|
|
|
void _lcd_ubl_level_bed();
|
|
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
void _lcd_goto_ubl_level_bed() {
|
|
lcd_goto_screen(_lcd_ubl_level_bed);
|
|
new_z_fade_height = planner.z_fade_height;
|
|
}
|
|
#endif
|
|
|
|
static int16_t ubl_storage_slot = 0,
|
|
custom_hotend_temp = 190,
|
|
side_points = 3,
|
|
ubl_fillin_amount = 5,
|
|
ubl_height_amount = 1,
|
|
n_edit_pts = 1,
|
|
x_plot = 0,
|
|
y_plot = 0;
|
|
|
|
#if HAS_HEATED_BED
|
|
static int16_t custom_bed_temp = 50;
|
|
#endif
|
|
|
|
/**
|
|
* UBL Build Custom Mesh Command
|
|
*/
|
|
void _lcd_ubl_build_custom_mesh() {
|
|
char UBL_LCD_GCODE[20];
|
|
enqueue_and_echo_commands_P(PSTR("G28"));
|
|
#if HAS_HEATED_BED
|
|
sprintf_P(UBL_LCD_GCODE, PSTR("M190 S%i"), custom_bed_temp);
|
|
lcd_enqueue_command(UBL_LCD_GCODE);
|
|
#endif
|
|
sprintf_P(UBL_LCD_GCODE, PSTR("M109 S%i"), custom_hotend_temp);
|
|
lcd_enqueue_command(UBL_LCD_GCODE);
|
|
enqueue_and_echo_commands_P(PSTR("G29 P1"));
|
|
}
|
|
|
|
/**
|
|
* UBL Custom Mesh submenu
|
|
*
|
|
* << Build Mesh
|
|
* Hotend Temp: ---
|
|
* Bed Temp: ---
|
|
* Build Custom Mesh
|
|
*/
|
|
void _lcd_ubl_custom_mesh() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_UBL_BUILD_MESH_MENU);
|
|
MENU_ITEM_EDIT(int3, MSG_UBL_CUSTOM_HOTEND_TEMP, &custom_hotend_temp, EXTRUDE_MINTEMP, (HEATER_0_MAXTEMP - 10));
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM_EDIT(int3, MSG_UBL_CUSTOM_BED_TEMP, &custom_bed_temp, BED_MINTEMP, (BED_MAXTEMP - 15));
|
|
#endif
|
|
MENU_ITEM(function, MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_build_custom_mesh);
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
* UBL Adjust Mesh Height Command
|
|
*/
|
|
void _lcd_ubl_adjust_height_cmd() {
|
|
char UBL_LCD_GCODE[16];
|
|
const int ind = ubl_height_amount > 0 ? 9 : 10;
|
|
strcpy_P(UBL_LCD_GCODE, PSTR("G29 P6 C -"));
|
|
sprintf_P(&UBL_LCD_GCODE[ind], PSTR(".%i"), abs(ubl_height_amount));
|
|
lcd_enqueue_command(UBL_LCD_GCODE);
|
|
}
|
|
|
|
/**
|
|
* UBL Adjust Mesh Height submenu
|
|
*
|
|
* << Edit Mesh
|
|
* Height Amount: ---
|
|
* Adjust Mesh Height
|
|
* << Info Screen
|
|
*/
|
|
void _lcd_ubl_height_adjust_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_UBL_EDIT_MESH_MENU);
|
|
MENU_ITEM_EDIT_CALLBACK(int3, MSG_UBL_MESH_HEIGHT_AMOUNT, &ubl_height_amount, -9, 9, _lcd_ubl_adjust_height_cmd);
|
|
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
* UBL Edit Mesh submenu
|
|
*
|
|
* << UBL Tools
|
|
* Fine Tune All
|
|
* Fine Tune Closest
|
|
* - Adjust Mesh Height >>
|
|
* << Info Screen
|
|
*/
|
|
void _lcd_ubl_edit_mesh() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_UBL_TOOLS);
|
|
MENU_ITEM(gcode, MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R999 T"));
|
|
MENU_ITEM(gcode, MSG_UBL_FINE_TUNE_CLOSEST, PSTR("G29 P4 T"));
|
|
MENU_ITEM(submenu, MSG_UBL_MESH_HEIGHT_ADJUST, _lcd_ubl_height_adjust_menu);
|
|
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
* UBL Validate Custom Mesh Command
|
|
*/
|
|
void _lcd_ubl_validate_custom_mesh() {
|
|
char UBL_LCD_GCODE[24];
|
|
const int temp =
|
|
#if HAS_HEATED_BED
|
|
custom_bed_temp
|
|
#else
|
|
0
|
|
#endif
|
|
;
|
|
sprintf_P(UBL_LCD_GCODE, PSTR("G26 C B%i H%i P"), temp, custom_hotend_temp);
|
|
lcd_enqueue_commands_P(PSTR("G28"));
|
|
lcd_enqueue_command(UBL_LCD_GCODE);
|
|
}
|
|
|
|
/**
|
|
* UBL Validate Mesh submenu
|
|
*
|
|
* << UBL Tools
|
|
* PLA Mesh Validation
|
|
* ABS Mesh Validation
|
|
* Validate Custom Mesh
|
|
* << Info Screen
|
|
*/
|
|
void _lcd_ubl_validate_mesh() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_UBL_TOOLS);
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(gcode, MSG_UBL_VALIDATE_PLA_MESH, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_1_TEMP_BED) " H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P"));
|
|
MENU_ITEM(gcode, MSG_UBL_VALIDATE_ABS_MESH, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_2_TEMP_BED) " H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P"));
|
|
#else
|
|
MENU_ITEM(gcode, MSG_UBL_VALIDATE_PLA_MESH, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P"));
|
|
MENU_ITEM(gcode, MSG_UBL_VALIDATE_ABS_MESH, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P"));
|
|
#endif
|
|
MENU_ITEM(function, MSG_UBL_VALIDATE_CUSTOM_MESH, _lcd_ubl_validate_custom_mesh);
|
|
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
* UBL Grid Leveling Command
|
|
*/
|
|
void _lcd_ubl_grid_level_cmd() {
|
|
char UBL_LCD_GCODE[10];
|
|
sprintf_P(UBL_LCD_GCODE, PSTR("G29 J%i"), side_points);
|
|
lcd_enqueue_command(UBL_LCD_GCODE);
|
|
}
|
|
|
|
/**
|
|
* UBL Grid Leveling submenu
|
|
*
|
|
* << UBL Tools
|
|
* Side points: ---
|
|
* Level Mesh
|
|
*/
|
|
void _lcd_ubl_grid_level() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_UBL_TOOLS);
|
|
MENU_ITEM_EDIT(int3, MSG_UBL_SIDE_POINTS, &side_points, 2, 6);
|
|
MENU_ITEM(function, MSG_UBL_MESH_LEVEL, _lcd_ubl_grid_level_cmd);
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
* UBL Mesh Leveling submenu
|
|
*
|
|
* << UBL Tools
|
|
* 3-Point Mesh Leveling
|
|
* - Grid Mesh Leveling >>
|
|
* << Info Screen
|
|
*/
|
|
void _lcd_ubl_mesh_leveling() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_UBL_TOOLS);
|
|
MENU_ITEM(gcode, MSG_UBL_3POINT_MESH_LEVELING, PSTR("G29 J0"));
|
|
MENU_ITEM(submenu, MSG_UBL_GRID_MESH_LEVELING, _lcd_ubl_grid_level);
|
|
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
* UBL Fill-in Amount Mesh Command
|
|
*/
|
|
void _lcd_ubl_fillin_amount_cmd() {
|
|
char UBL_LCD_GCODE[16];
|
|
sprintf_P(UBL_LCD_GCODE, PSTR("G29 P3 R C.%i"), ubl_fillin_amount);
|
|
lcd_enqueue_command(UBL_LCD_GCODE);
|
|
}
|
|
|
|
/**
|
|
* UBL Fill-in Mesh submenu
|
|
*
|
|
* << Build Mesh
|
|
* Fill-in Amount: ---
|
|
* Fill-in Mesh
|
|
* Smart Fill-in
|
|
* Manual Fill-in
|
|
* << Info Screen
|
|
*/
|
|
void _lcd_ubl_fillin_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_UBL_BUILD_MESH_MENU);
|
|
MENU_ITEM_EDIT_CALLBACK(int3, MSG_UBL_FILLIN_AMOUNT, &ubl_fillin_amount, 0, 9, _lcd_ubl_fillin_amount_cmd);
|
|
MENU_ITEM(gcode, MSG_UBL_SMART_FILLIN, PSTR("G29 P3 T0"));
|
|
MENU_ITEM(gcode, MSG_UBL_MANUAL_FILLIN, PSTR("G29 P2 B T0"));
|
|
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
|
|
END_MENU();
|
|
}
|
|
|
|
void _lcd_ubl_invalidate() {
|
|
ubl.invalidate();
|
|
SERIAL_PROTOCOLLNPGM("Mesh invalidated.");
|
|
}
|
|
|
|
/**
|
|
* UBL Build Mesh submenu
|
|
*
|
|
* << UBL Tools
|
|
* Build PLA Mesh
|
|
* Build ABS Mesh
|
|
* - Build Custom Mesh >>
|
|
* Build Cold Mesh
|
|
* - Fill-in Mesh >>
|
|
* Continue Bed Mesh
|
|
* Invalidate All
|
|
* Invalidate Closest
|
|
* << Info Screen
|
|
*/
|
|
void _lcd_ubl_build_mesh() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_UBL_TOOLS);
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM(gcode, MSG_UBL_BUILD_PLA_MESH, PSTR(
|
|
"G28\n"
|
|
"M190 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\n"
|
|
"M109 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) "\n"
|
|
"G29 P1\n"
|
|
"M104 S0\n"
|
|
"M140 S0"
|
|
));
|
|
MENU_ITEM(gcode, MSG_UBL_BUILD_ABS_MESH, PSTR(
|
|
"G28\n"
|
|
"M190 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\n"
|
|
"M109 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) "\n"
|
|
"G29 P1\n"
|
|
"M104 S0\n"
|
|
"M140 S0"
|
|
));
|
|
#else
|
|
MENU_ITEM(gcode, MSG_UBL_BUILD_PLA_MESH, PSTR(
|
|
"G28\n"
|
|
"M109 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) "\n"
|
|
"G29 P1\n"
|
|
"M104 S0"
|
|
));
|
|
MENU_ITEM(gcode, MSG_UBL_BUILD_ABS_MESH, PSTR(
|
|
"G28\n"
|
|
"M109 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) "\n"
|
|
"G29 P1\n"
|
|
"M104 S0"
|
|
));
|
|
#endif
|
|
MENU_ITEM(submenu, MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_custom_mesh);
|
|
MENU_ITEM(gcode, MSG_UBL_BUILD_COLD_MESH, PSTR("G28\nG29 P1"));
|
|
MENU_ITEM(submenu, MSG_UBL_FILLIN_MESH, _lcd_ubl_fillin_menu);
|
|
MENU_ITEM(gcode, MSG_UBL_CONTINUE_MESH, PSTR("G29 P1 C"));
|
|
MENU_ITEM(function, MSG_UBL_INVALIDATE_ALL, _lcd_ubl_invalidate);
|
|
MENU_ITEM(gcode, MSG_UBL_INVALIDATE_CLOSEST, PSTR("G29 I"));
|
|
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
* UBL Load Mesh Command
|
|
*/
|
|
void _lcd_ubl_load_mesh_cmd() {
|
|
char UBL_LCD_GCODE[25];
|
|
sprintf_P(UBL_LCD_GCODE, PSTR("G29 L%i"), ubl_storage_slot);
|
|
lcd_enqueue_command(UBL_LCD_GCODE);
|
|
sprintf_P(UBL_LCD_GCODE, PSTR("M117 " MSG_MESH_LOADED), ubl_storage_slot);
|
|
lcd_enqueue_command(UBL_LCD_GCODE);
|
|
}
|
|
|
|
/**
|
|
* UBL Save Mesh Command
|
|
*/
|
|
void _lcd_ubl_save_mesh_cmd() {
|
|
char UBL_LCD_GCODE[25];
|
|
sprintf_P(UBL_LCD_GCODE, PSTR("G29 S%i"), ubl_storage_slot);
|
|
lcd_enqueue_command(UBL_LCD_GCODE);
|
|
sprintf_P(UBL_LCD_GCODE, PSTR("M117 " MSG_MESH_SAVED), ubl_storage_slot);
|
|
lcd_enqueue_command(UBL_LCD_GCODE);
|
|
}
|
|
|
|
/**
|
|
* UBL Mesh Storage submenu
|
|
*
|
|
* << Unified Bed Leveling
|
|
* Memory Slot: ---
|
|
* Load Bed Mesh
|
|
* Save Bed Mesh
|
|
*/
|
|
void _lcd_ubl_storage_mesh() {
|
|
int16_t a = settings.calc_num_meshes();
|
|
START_MENU();
|
|
MENU_BACK(MSG_UBL_LEVEL_BED);
|
|
if (!WITHIN(ubl_storage_slot, 0, a - 1)) {
|
|
STATIC_ITEM(MSG_NO_STORAGE);
|
|
}
|
|
else {
|
|
MENU_ITEM_EDIT(int3, MSG_UBL_STORAGE_SLOT, &ubl_storage_slot, 0, a - 1);
|
|
MENU_ITEM(function, MSG_UBL_LOAD_MESH, _lcd_ubl_load_mesh_cmd);
|
|
MENU_ITEM(function, MSG_UBL_SAVE_MESH, _lcd_ubl_save_mesh_cmd);
|
|
}
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
* UBL LCD "radar" map homing
|
|
*/
|
|
void _lcd_ubl_output_map_lcd();
|
|
|
|
void _lcd_ubl_map_homing() {
|
|
defer_return_to_status = true;
|
|
if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT < 3 ? 0 : (LCD_HEIGHT > 4 ? 2 : 1), PSTR(MSG_LEVEL_BED_HOMING));
|
|
lcdDrawUpdate = LCDVIEW_CALL_NO_REDRAW;
|
|
if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS]) {
|
|
ubl.lcd_map_control = true; // Return to the map screen
|
|
lcd_goto_screen(_lcd_ubl_output_map_lcd);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* UBL LCD "radar" map point editing
|
|
*/
|
|
void _lcd_ubl_map_lcd_edit_cmd() {
|
|
char UBL_LCD_GCODE[50], str[10], str2[10];
|
|
dtostrf(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot]), 0, 2, str);
|
|
dtostrf(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot]), 0, 2, str2);
|
|
snprintf_P(UBL_LCD_GCODE, sizeof(UBL_LCD_GCODE), PSTR("G29 P4 X%s Y%s R%i"), str, str2, n_edit_pts);
|
|
lcd_enqueue_command(UBL_LCD_GCODE);
|
|
}
|
|
|
|
/**
|
|
* UBL LCD Map Movement
|
|
*/
|
|
void ubl_map_move_to_xy() {
|
|
current_position[X_AXIS] = pgm_read_float(&ubl._mesh_index_to_xpos[x_plot]);
|
|
current_position[Y_AXIS] = pgm_read_float(&ubl._mesh_index_to_ypos[y_plot]);
|
|
planner.buffer_line_kinematic(current_position, MMM_TO_MMS(XY_PROBE_SPEED), active_extruder);
|
|
}
|
|
|
|
/**
|
|
* UBL LCD "radar" map
|
|
*/
|
|
void set_current_from_steppers_for_axis(const AxisEnum axis);
|
|
|
|
void _lcd_do_nothing() {}
|
|
void _lcd_hard_stop() {
|
|
stepper.quick_stop();
|
|
const screenFunc_t old_screen = currentScreen;
|
|
currentScreen = _lcd_do_nothing;
|
|
while (planner.movesplanned()) idle();
|
|
currentScreen = old_screen;
|
|
stepper.cleaning_buffer_counter = 0;
|
|
set_current_from_steppers_for_axis(ALL_AXES);
|
|
sync_plan_position();
|
|
}
|
|
|
|
void _lcd_ubl_output_map_lcd() {
|
|
static int16_t step_scaler = 0;
|
|
|
|
if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS]))
|
|
return lcd_goto_screen(_lcd_ubl_map_homing);
|
|
|
|
if (use_click()) return _lcd_ubl_map_lcd_edit_cmd();
|
|
ENCODER_DIRECTION_NORMAL();
|
|
|
|
if (encoderPosition) {
|
|
step_scaler += (int32_t)encoderPosition;
|
|
x_plot += step_scaler / (ENCODER_STEPS_PER_MENU_ITEM);
|
|
if (abs(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM) step_scaler = 0;
|
|
encoderPosition = 0;
|
|
lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
|
|
}
|
|
|
|
// Encoder to the right (++)
|
|
if (x_plot >= GRID_MAX_POINTS_X) { x_plot = 0; y_plot++; }
|
|
if (y_plot >= GRID_MAX_POINTS_Y) y_plot = 0;
|
|
|
|
// Encoder to the left (--)
|
|
if (x_plot <= GRID_MAX_POINTS_X - (GRID_MAX_POINTS_X + 1)) { x_plot = GRID_MAX_POINTS_X - 1; y_plot--; }
|
|
if (y_plot <= GRID_MAX_POINTS_Y - (GRID_MAX_POINTS_Y + 1)) y_plot = GRID_MAX_POINTS_Y - 1;
|
|
|
|
// Prevent underrun/overrun of plot numbers
|
|
x_plot = constrain(x_plot, GRID_MAX_POINTS_X - (GRID_MAX_POINTS_X + 1), GRID_MAX_POINTS_X + 1);
|
|
y_plot = constrain(y_plot, GRID_MAX_POINTS_Y - (GRID_MAX_POINTS_Y + 1), GRID_MAX_POINTS_Y + 1);
|
|
|
|
// Determine number of points to edit
|
|
#if IS_KINEMATIC
|
|
n_edit_pts = 9; //TODO: Delta accessible edit points
|
|
#else
|
|
const bool xc = WITHIN(x_plot, 1, GRID_MAX_POINTS_X - 2),
|
|
yc = WITHIN(y_plot, 1, GRID_MAX_POINTS_Y - 2);
|
|
n_edit_pts = yc ? (xc ? 9 : 6) : (xc ? 6 : 4); // Corners
|
|
#endif
|
|
|
|
if (lcdDrawUpdate) {
|
|
lcd_implementation_ubl_plot(x_plot, y_plot);
|
|
|
|
if (planner.movesplanned()) // If the nozzle is already moving, cancel the move.
|
|
_lcd_hard_stop();
|
|
|
|
ubl_map_move_to_xy(); // Move to new location
|
|
}
|
|
}
|
|
|
|
/**
|
|
* UBL Homing before LCD map
|
|
*/
|
|
void _lcd_ubl_output_map_lcd_cmd() {
|
|
if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS])) {
|
|
axis_homed[X_AXIS] = axis_homed[Y_AXIS] = axis_homed[Z_AXIS] = false;
|
|
enqueue_and_echo_commands_P(PSTR("G28"));
|
|
}
|
|
lcd_goto_screen(_lcd_ubl_map_homing);
|
|
}
|
|
|
|
/**
|
|
* UBL Output map submenu
|
|
*
|
|
* << Unified Bed Leveling
|
|
* Output for Host
|
|
* Output for CSV
|
|
* Off Printer Backup
|
|
* Output Mesh Map
|
|
*/
|
|
void _lcd_ubl_output_map() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_UBL_LEVEL_BED);
|
|
MENU_ITEM(gcode, MSG_UBL_OUTPUT_MAP_HOST, PSTR("G29 T0"));
|
|
MENU_ITEM(gcode, MSG_UBL_OUTPUT_MAP_CSV, PSTR("G29 T1"));
|
|
MENU_ITEM(gcode, MSG_UBL_OUTPUT_MAP_BACKUP, PSTR("G29 S-1"));
|
|
MENU_ITEM(function, MSG_UBL_OUTPUT_MAP, _lcd_ubl_output_map_lcd_cmd);
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
* UBL Tools submenu
|
|
*
|
|
* << Unified Bed Leveling
|
|
* - Build Mesh >>
|
|
* - Validate Mesh >>
|
|
* - Edit Mesh >>
|
|
* - Mesh Leveling >>
|
|
*/
|
|
void _lcd_ubl_tools_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_UBL_LEVEL_BED);
|
|
MENU_ITEM(submenu, MSG_UBL_BUILD_MESH_MENU, _lcd_ubl_build_mesh);
|
|
MENU_ITEM(gcode, MSG_UBL_MANUAL_MESH, PSTR("G29 I999\nG29 P2 B T0"));
|
|
MENU_ITEM(submenu, MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh);
|
|
MENU_ITEM(submenu, MSG_UBL_EDIT_MESH_MENU, _lcd_ubl_edit_mesh);
|
|
MENU_ITEM(submenu, MSG_UBL_MESH_LEVELING, _lcd_ubl_mesh_leveling);
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
* UBL Step-By-Step submenu
|
|
*
|
|
* << Unified Bed Leveling
|
|
* 1 Build Cold Mesh
|
|
* 2 Smart Fill-in
|
|
* - 3 Validate Mesh >>
|
|
* 4 Fine Tune All
|
|
* - 5 Validate Mesh >>
|
|
* 6 Fine Tune All
|
|
* 7 Save Bed Mesh
|
|
*/
|
|
void _lcd_ubl_step_by_step() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_UBL_LEVEL_BED);
|
|
MENU_ITEM(gcode, "1 " MSG_UBL_BUILD_COLD_MESH, PSTR("G28\nG29 P1"));
|
|
MENU_ITEM(gcode, "2 " MSG_UBL_SMART_FILLIN, PSTR("G29 P3 T0"));
|
|
MENU_ITEM(submenu, "3 " MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh);
|
|
MENU_ITEM(gcode, "4 " MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R999 T"));
|
|
MENU_ITEM(submenu, "5 " MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh);
|
|
MENU_ITEM(gcode, "6 " MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R999 T"));
|
|
MENU_ITEM(function, "7 " MSG_UBL_SAVE_MESH, _lcd_ubl_save_mesh_cmd);
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
* UBL System submenu
|
|
*
|
|
* << Prepare
|
|
* - Manually Build Mesh >>
|
|
* - Activate UBL >>
|
|
* - Deactivate UBL >>
|
|
* - Step-By-Step UBL >>
|
|
* - Mesh Storage >>
|
|
* - Output Map >>
|
|
* - UBL Tools >>
|
|
* - Output UBL Info >>
|
|
*/
|
|
|
|
void _lcd_ubl_level_bed() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_PREPARE);
|
|
MENU_ITEM(gcode, MSG_UBL_ACTIVATE_MESH, PSTR("G29 A"));
|
|
MENU_ITEM(gcode, MSG_UBL_DEACTIVATE_MESH, PSTR("G29 D"));
|
|
MENU_ITEM(submenu, MSG_UBL_STEP_BY_STEP_MENU, _lcd_ubl_step_by_step);
|
|
MENU_ITEM(function, MSG_UBL_MESH_EDIT, _lcd_ubl_output_map_lcd_cmd);
|
|
MENU_ITEM(submenu, MSG_UBL_STORAGE_MESH_MENU, _lcd_ubl_storage_mesh);
|
|
MENU_ITEM(submenu, MSG_UBL_OUTPUT_MAP, _lcd_ubl_output_map);
|
|
MENU_ITEM(submenu, MSG_UBL_TOOLS, _lcd_ubl_tools_menu);
|
|
MENU_ITEM(gcode, MSG_UBL_INFO_UBL, PSTR("G29 W"));
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0.0, 100.0, _lcd_set_z_fade_height);
|
|
#endif
|
|
END_MENU();
|
|
}
|
|
|
|
#endif // AUTO_BED_LEVELING_UBL
|
|
|
|
|
|
#if ENABLED(LCD_BED_LEVELING) || (PLANNER_LEVELING && DISABLED(SLIM_LCD_MENUS))
|
|
void _lcd_toggle_bed_leveling() { set_bed_leveling_enabled(!planner.leveling_active); }
|
|
#endif
|
|
|
|
#if ENABLED(LCD_BED_LEVELING)
|
|
|
|
/**
|
|
* Step 1: Bed Level entry-point
|
|
*
|
|
* << Prepare
|
|
* Auto Home (if homing needed)
|
|
* Leveling On/Off (if data exists, and homed)
|
|
* Fade Height: --- (Req: ENABLE_LEVELING_FADE_HEIGHT)
|
|
* Mesh Z Offset: --- (Req: MESH_BED_LEVELING)
|
|
* Z Probe Offset: --- (Req: HAS_BED_PROBE, Opt: BABYSTEP_ZPROBE_OFFSET)
|
|
* Level Bed >
|
|
* Level Corners > (if homed)
|
|
* Load Settings (Req: EEPROM_SETTINGS)
|
|
* Save Settings (Req: EEPROM_SETTINGS)
|
|
*/
|
|
void lcd_bed_leveling() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_PREPARE);
|
|
|
|
const bool is_homed = axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS];
|
|
|
|
// Auto Home if not using manual probing
|
|
#if DISABLED(PROBE_MANUALLY) && DISABLED(MESH_BED_LEVELING)
|
|
if (!is_homed) MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
|
|
#endif
|
|
|
|
// Level Bed
|
|
#if ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING)
|
|
// Manual leveling uses a guided procedure
|
|
MENU_ITEM(submenu, MSG_LEVEL_BED, _lcd_level_bed_continue);
|
|
#else
|
|
// Automatic leveling can just run the G-code
|
|
MENU_ITEM(gcode, MSG_LEVEL_BED, is_homed ? PSTR("G29") : PSTR("G28\nG29"));
|
|
#endif
|
|
|
|
// Homed and leveling is valid? Then leveling can be toggled.
|
|
if (is_homed && leveling_is_valid()) {
|
|
bool new_level_state = planner.leveling_active;
|
|
MENU_ITEM_EDIT_CALLBACK(bool, MSG_BED_LEVELING, &new_level_state, _lcd_toggle_bed_leveling);
|
|
}
|
|
|
|
// Z Fade Height
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0.0, 100.0, _lcd_set_z_fade_height);
|
|
#endif
|
|
|
|
//
|
|
// MBL Z Offset
|
|
//
|
|
#if ENABLED(MESH_BED_LEVELING)
|
|
MENU_ITEM_EDIT(float43, MSG_BED_Z, &mbl.z_offset, -1, 1);
|
|
#endif
|
|
|
|
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
|
MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset);
|
|
#elif HAS_BED_PROBE
|
|
MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
|
|
#endif
|
|
|
|
#if ENABLED(LEVEL_BED_CORNERS)
|
|
// Move to the next corner for leveling
|
|
if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS])
|
|
MENU_ITEM(submenu, MSG_LEVEL_CORNERS, _lcd_level_bed_corners);
|
|
#endif
|
|
|
|
#if ENABLED(EEPROM_SETTINGS)
|
|
MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings);
|
|
MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
|
|
#endif
|
|
END_MENU();
|
|
}
|
|
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
void _lcd_goto_bed_leveling() {
|
|
lcd_goto_screen(lcd_bed_leveling);
|
|
new_z_fade_height = planner.z_fade_height;
|
|
}
|
|
#endif
|
|
|
|
#endif // LCD_BED_LEVELING
|
|
|
|
/**
|
|
*
|
|
* "Prepare" submenu
|
|
*
|
|
*/
|
|
|
|
void lcd_prepare_menu() {
|
|
START_MENU();
|
|
|
|
//
|
|
// ^ Main
|
|
//
|
|
MENU_BACK(MSG_MAIN);
|
|
|
|
//
|
|
// Move Axis
|
|
//
|
|
#if ENABLED(DELTA)
|
|
if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS])
|
|
#endif
|
|
MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
|
|
|
|
//
|
|
// Auto Home
|
|
//
|
|
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
|
|
#if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU)
|
|
MENU_ITEM(gcode, MSG_AUTO_HOME_X, PSTR("G28 X"));
|
|
MENU_ITEM(gcode, MSG_AUTO_HOME_Y, PSTR("G28 Y"));
|
|
MENU_ITEM(gcode, MSG_AUTO_HOME_Z, PSTR("G28 Z"));
|
|
#endif
|
|
|
|
//
|
|
// Level Bed
|
|
//
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
|
|
|
MENU_ITEM(submenu, MSG_UBL_LEVEL_BED, (
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
_lcd_goto_ubl_level_bed
|
|
#else
|
|
_lcd_ubl_level_bed
|
|
#endif
|
|
)
|
|
);
|
|
|
|
#elif ENABLED(LCD_BED_LEVELING)
|
|
|
|
#if ENABLED(PROBE_MANUALLY)
|
|
if (!g29_in_progress)
|
|
#endif
|
|
|
|
MENU_ITEM(submenu, MSG_BED_LEVELING, (
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
_lcd_goto_bed_leveling
|
|
#else
|
|
lcd_bed_leveling
|
|
#endif
|
|
)
|
|
);
|
|
|
|
#elif PLANNER_LEVELING && DISABLED(SLIM_LCD_MENUS)
|
|
|
|
#if DISABLED(PROBE_MANUALLY)
|
|
MENU_ITEM(gcode, MSG_LEVEL_BED, PSTR("G28\nG29"));
|
|
#endif
|
|
if (leveling_is_valid()) {
|
|
bool new_level_state = planner.leveling_active;
|
|
MENU_ITEM_EDIT_CALLBACK(bool, MSG_BED_LEVELING, &new_level_state, _lcd_toggle_bed_leveling);
|
|
}
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0.0, 100.0, _lcd_set_z_fade_height);
|
|
#endif
|
|
|
|
#endif
|
|
|
|
#if ENABLED(LEVEL_BED_CORNERS) && DISABLED(LCD_BED_LEVELING)
|
|
if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS])
|
|
MENU_ITEM(function, MSG_LEVEL_CORNERS, _lcd_level_bed_corners);
|
|
#endif
|
|
|
|
#if HAS_M206_COMMAND && DISABLED(SLIM_LCD_MENUS)
|
|
//
|
|
// Set Home Offsets
|
|
//
|
|
MENU_ITEM(function, MSG_SET_HOME_OFFSETS, lcd_set_home_offsets);
|
|
#endif
|
|
|
|
//
|
|
// Disable Steppers
|
|
//
|
|
MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
|
|
|
|
//
|
|
// Change filament
|
|
//
|
|
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
if (!IS_SD_FILE_OPEN) {
|
|
#if E_STEPPERS == 1 && !ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
|
if (thermalManager.targetHotEnoughToExtrude(active_extruder))
|
|
MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
|
|
else
|
|
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_temp_menu_e0_filament_change);
|
|
#else
|
|
MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_change_filament_menu);
|
|
#endif
|
|
}
|
|
#endif // ADVANCED_PAUSE_FEATURE
|
|
|
|
#if HAS_TEMP_HOTEND
|
|
|
|
//
|
|
// Cooldown
|
|
//
|
|
bool has_heat = false;
|
|
HOTEND_LOOP() if (thermalManager.target_temperature[HOTEND_INDEX]) { has_heat = true; break; }
|
|
#if HAS_HEATED_BED
|
|
if (thermalManager.target_temperature_bed) has_heat = true;
|
|
#endif
|
|
if (has_heat) MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
|
|
|
|
//
|
|
// Preheat for Material 1 and 2
|
|
//
|
|
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || HAS_HEATED_BED
|
|
MENU_ITEM(submenu, MSG_PREHEAT_1, lcd_preheat_m1_menu);
|
|
MENU_ITEM(submenu, MSG_PREHEAT_2, lcd_preheat_m2_menu);
|
|
#else
|
|
MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0_only);
|
|
MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only);
|
|
#endif
|
|
|
|
#endif // HAS_TEMP_HOTEND
|
|
|
|
//
|
|
// BLTouch Self-Test and Reset
|
|
//
|
|
#if ENABLED(BLTOUCH)
|
|
MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST)));
|
|
if (!endstops.z_probe_enabled && TEST_BLTOUCH())
|
|
MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET)));
|
|
#endif
|
|
|
|
//
|
|
// Switch power on/off
|
|
//
|
|
#if HAS_POWER_SWITCH
|
|
if (powersupply_on)
|
|
MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
|
|
else
|
|
MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
|
|
#endif
|
|
|
|
//
|
|
// Autostart
|
|
//
|
|
#if ENABLED(SDSUPPORT) && ENABLED(MENU_ADDAUTOSTART)
|
|
MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
|
|
#endif
|
|
|
|
//
|
|
// Delta Calibration
|
|
//
|
|
#if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
|
|
MENU_ITEM(submenu, MSG_DELTA_CALIBRATE, lcd_delta_calibrate_menu);
|
|
#endif
|
|
|
|
END_MENU();
|
|
}
|
|
|
|
float move_menu_scale;
|
|
|
|
#if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
|
|
|
|
void lcd_move_z();
|
|
|
|
void _man_probe_pt(const float &rx, const float &ry) {
|
|
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
|
|
do_blocking_move_to_xy(rx, ry);
|
|
|
|
lcd_synchronize();
|
|
move_menu_scale = max(PROBE_MANUALLY_STEP, MIN_STEPS_PER_SEGMENT / float(DEFAULT_XYZ_STEPS_PER_UNIT));
|
|
lcd_goto_screen(lcd_move_z);
|
|
}
|
|
|
|
#endif // DELTA_CALIBRATION_MENU || DELTA_AUTO_CALIBRATION
|
|
|
|
#if ENABLED(DELTA_AUTO_CALIBRATION)
|
|
|
|
float lcd_probe_pt(const float &rx, const float &ry) {
|
|
_man_probe_pt(rx, ry);
|
|
KEEPALIVE_STATE(PAUSED_FOR_USER);
|
|
defer_return_to_status = true;
|
|
wait_for_user = true;
|
|
while (wait_for_user) idle();
|
|
KEEPALIVE_STATE(IN_HANDLER);
|
|
lcd_goto_previous_menu_no_defer();
|
|
return current_position[Z_AXIS];
|
|
}
|
|
|
|
#endif // DELTA_AUTO_CALIBRATION
|
|
|
|
#if ENABLED(DELTA_CALIBRATION_MENU)
|
|
|
|
void _lcd_calibrate_homing() {
|
|
if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT >= 4 ? 1 : 0, PSTR(MSG_LEVEL_BED_HOMING));
|
|
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
|
|
if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS])
|
|
lcd_goto_previous_menu();
|
|
}
|
|
|
|
void _lcd_delta_calibrate_home() {
|
|
enqueue_and_echo_commands_P(PSTR("G28"));
|
|
lcd_goto_screen(_lcd_calibrate_homing);
|
|
}
|
|
|
|
void _goto_tower_x() { _man_probe_pt(cos(RADIANS(210)) * delta_calibration_radius, sin(RADIANS(210)) * delta_calibration_radius); }
|
|
void _goto_tower_y() { _man_probe_pt(cos(RADIANS(330)) * delta_calibration_radius, sin(RADIANS(330)) * delta_calibration_radius); }
|
|
void _goto_tower_z() { _man_probe_pt(cos(RADIANS( 90)) * delta_calibration_radius, sin(RADIANS( 90)) * delta_calibration_radius); }
|
|
void _goto_center() { _man_probe_pt(0,0); }
|
|
|
|
#endif // DELTA_CALIBRATION_MENU
|
|
|
|
#if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
|
|
|
|
void _recalc_delta_settings() {
|
|
#if HAS_LEVELING
|
|
reset_bed_level(); // After changing kinematics bed-level data is no longer valid
|
|
#endif
|
|
recalc_delta_settings();
|
|
}
|
|
|
|
void lcd_delta_settings() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_DELTA_CALIBRATE);
|
|
MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10.0, delta_height + 10.0, _recalc_delta_settings);
|
|
MENU_ITEM_EDIT_CALLBACK(float43, "Ex", &delta_endstop_adj[A_AXIS], -5.0, 5.0, _recalc_delta_settings);
|
|
MENU_ITEM_EDIT_CALLBACK(float43, "Ey", &delta_endstop_adj[B_AXIS], -5.0, 5.0, _recalc_delta_settings);
|
|
MENU_ITEM_EDIT_CALLBACK(float43, "Ez", &delta_endstop_adj[C_AXIS], -5.0, 5.0, _recalc_delta_settings);
|
|
MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_RADIUS, &delta_radius, delta_radius - 5.0, delta_radius + 5.0, _recalc_delta_settings);
|
|
MENU_ITEM_EDIT_CALLBACK(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5.0, 5.0, _recalc_delta_settings);
|
|
MENU_ITEM_EDIT_CALLBACK(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5.0, 5.0, _recalc_delta_settings);
|
|
MENU_ITEM_EDIT_CALLBACK(float43, "Tz", &delta_tower_angle_trim[C_AXIS], -5.0, 5.0, _recalc_delta_settings);
|
|
MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_DIAG_ROD, &delta_diagonal_rod, delta_diagonal_rod - 5.0, delta_diagonal_rod + 5.0, _recalc_delta_settings);
|
|
END_MENU();
|
|
}
|
|
|
|
void lcd_delta_calibrate_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_MAIN);
|
|
#if ENABLED(DELTA_AUTO_CALIBRATION)
|
|
MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33"));
|
|
MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 P1"));
|
|
MENU_ITEM(gcode, MSG_DELTA_Z_OFFSET_CALIBRATE, PSTR("G33 P-1"));
|
|
#if ENABLED(EEPROM_SETTINGS)
|
|
MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
|
|
MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings);
|
|
#endif
|
|
#endif
|
|
MENU_ITEM(submenu, MSG_DELTA_SETTINGS, lcd_delta_settings);
|
|
#if ENABLED(DELTA_CALIBRATION_MENU)
|
|
MENU_ITEM(submenu, MSG_AUTO_HOME, _lcd_delta_calibrate_home);
|
|
if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS]) {
|
|
MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_X, _goto_tower_x);
|
|
MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_Y, _goto_tower_y);
|
|
MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_Z, _goto_tower_z);
|
|
MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_CENTER, _goto_center);
|
|
}
|
|
#endif
|
|
END_MENU();
|
|
}
|
|
|
|
#endif // DELTA_CALIBRATION_MENU || DELTA_AUTO_CALIBRATION
|
|
|
|
/**
|
|
* If the most recent manual move hasn't been fed to the planner yet,
|
|
* and the planner can accept one, send immediately
|
|
*/
|
|
inline void manage_manual_move() {
|
|
|
|
if (processing_manual_move) return;
|
|
|
|
if (manual_move_axis != (int8_t)NO_AXIS && ELAPSED(millis(), manual_move_start_time) && !planner.is_full()) {
|
|
|
|
#if IS_KINEMATIC
|
|
|
|
const float old_feedrate = feedrate_mm_s;
|
|
feedrate_mm_s = MMM_TO_MMS(manual_feedrate_mm_m[manual_move_axis]);
|
|
|
|
#if EXTRUDERS > 1
|
|
const int8_t old_extruder = active_extruder;
|
|
active_extruder = manual_move_e_index;
|
|
#endif
|
|
|
|
// Set movement on a single axis
|
|
set_destination_from_current();
|
|
destination[manual_move_axis] += manual_move_offset;
|
|
|
|
// Reset for the next move
|
|
manual_move_offset = 0.0;
|
|
manual_move_axis = (int8_t)NO_AXIS;
|
|
|
|
// DELTA and SCARA machines use segmented moves, which could fill the planner during the call to
|
|
// move_to_destination. This will cause idle() to be called, which can then call this function while the
|
|
// previous invocation is being blocked. Modifications to manual_move_offset shouldn't be made while
|
|
// processing_manual_move is true or the planner will get out of sync.
|
|
processing_manual_move = true;
|
|
prepare_move_to_destination(); // will call set_current_from_destination()
|
|
processing_manual_move = false;
|
|
|
|
feedrate_mm_s = old_feedrate;
|
|
#if EXTRUDERS > 1
|
|
active_extruder = old_extruder;
|
|
#endif
|
|
|
|
#else
|
|
|
|
planner.buffer_line_kinematic(current_position, MMM_TO_MMS(manual_feedrate_mm_m[manual_move_axis]), manual_move_e_index);
|
|
manual_move_axis = (int8_t)NO_AXIS;
|
|
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Set a flag that lcd_update() should start a move
|
|
* to "current_position" after a short delay.
|
|
*/
|
|
inline void manual_move_to_current(AxisEnum axis
|
|
#if E_MANUAL > 1
|
|
, const int8_t eindex=-1
|
|
#endif
|
|
) {
|
|
#if ENABLED(DUAL_X_CARRIAGE) || E_MANUAL > 1
|
|
#if E_MANUAL > 1
|
|
if (axis == E_AXIS)
|
|
#endif
|
|
manual_move_e_index = eindex >= 0 ? eindex : active_extruder;
|
|
#endif
|
|
manual_move_start_time = millis() + (move_menu_scale < 0.99 ? 0UL : 250UL); // delay for bigger moves
|
|
manual_move_axis = (int8_t)axis;
|
|
}
|
|
|
|
/**
|
|
*
|
|
* "Prepare" > "Move Axis" submenu
|
|
*
|
|
*/
|
|
|
|
void _lcd_move_xyz(const char* name, AxisEnum axis) {
|
|
if (use_click()) { return lcd_goto_previous_menu_no_defer(); }
|
|
ENCODER_DIRECTION_NORMAL();
|
|
if (encoderPosition && !processing_manual_move) {
|
|
|
|
// Start with no limits to movement
|
|
float min = current_position[axis] - 1000,
|
|
max = current_position[axis] + 1000;
|
|
|
|
// Limit to software endstops, if enabled
|
|
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
|
if (soft_endstops_enabled) switch (axis) {
|
|
case X_AXIS:
|
|
#if ENABLED(MIN_SOFTWARE_ENDSTOP_X)
|
|
min = soft_endstop_min[X_AXIS];
|
|
#endif
|
|
#if ENABLED(MAX_SOFTWARE_ENDSTOP_X)
|
|
max = soft_endstop_max[X_AXIS];
|
|
#endif
|
|
break;
|
|
case Y_AXIS:
|
|
#if ENABLED(MIN_SOFTWARE_ENDSTOP_Y)
|
|
min = soft_endstop_min[Y_AXIS];
|
|
#endif
|
|
#if ENABLED(MAX_SOFTWARE_ENDSTOP_Y)
|
|
max = soft_endstop_max[Y_AXIS];
|
|
#endif
|
|
break;
|
|
case Z_AXIS:
|
|
#if ENABLED(MIN_SOFTWARE_ENDSTOP_Z)
|
|
min = soft_endstop_min[Z_AXIS];
|
|
#endif
|
|
#if ENABLED(MAX_SOFTWARE_ENDSTOP_Z)
|
|
max = soft_endstop_max[Z_AXIS];
|
|
#endif
|
|
default: break;
|
|
}
|
|
#endif // MIN_SOFTWARE_ENDSTOPS || MAX_SOFTWARE_ENDSTOPS
|
|
|
|
// Delta limits XY based on the current offset from center
|
|
// This assumes the center is 0,0
|
|
#if ENABLED(DELTA)
|
|
if (axis != Z_AXIS) {
|
|
max = SQRT(sq((float)(DELTA_PRINTABLE_RADIUS)) - sq(current_position[Y_AXIS - axis])); // (Y_AXIS - axis) == the other axis
|
|
min = -max;
|
|
}
|
|
#endif
|
|
|
|
// Get the new position
|
|
const float diff = float((int32_t)encoderPosition) * move_menu_scale;
|
|
#if IS_KINEMATIC
|
|
manual_move_offset += diff;
|
|
if ((int32_t)encoderPosition < 0)
|
|
NOLESS(manual_move_offset, min - current_position[axis]);
|
|
else
|
|
NOMORE(manual_move_offset, max - current_position[axis]);
|
|
#else
|
|
current_position[axis] += diff;
|
|
if ((int32_t)encoderPosition < 0)
|
|
NOLESS(current_position[axis], min);
|
|
else
|
|
NOMORE(current_position[axis], max);
|
|
#endif
|
|
|
|
manual_move_to_current(axis);
|
|
lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
|
|
}
|
|
encoderPosition = 0;
|
|
if (lcdDrawUpdate) {
|
|
const float pos = NATIVE_TO_LOGICAL(processing_manual_move ? destination[axis] : current_position[axis]
|
|
#if IS_KINEMATIC
|
|
+ manual_move_offset
|
|
#endif
|
|
, axis);
|
|
lcd_implementation_drawedit(name, move_menu_scale >= 0.1 ? ftostr41sign(pos) : ftostr43sign(pos));
|
|
}
|
|
}
|
|
void lcd_move_x() { _lcd_move_xyz(PSTR(MSG_MOVE_X), X_AXIS); }
|
|
void lcd_move_y() { _lcd_move_xyz(PSTR(MSG_MOVE_Y), Y_AXIS); }
|
|
void lcd_move_z() { _lcd_move_xyz(PSTR(MSG_MOVE_Z), Z_AXIS); }
|
|
void _lcd_move_e(
|
|
#if E_MANUAL > 1
|
|
const int8_t eindex=-1
|
|
#endif
|
|
) {
|
|
if (use_click()) { return lcd_goto_previous_menu_no_defer(); }
|
|
ENCODER_DIRECTION_NORMAL();
|
|
if (encoderPosition) {
|
|
if (!processing_manual_move) {
|
|
const float diff = float((int32_t)encoderPosition) * move_menu_scale;
|
|
#if IS_KINEMATIC
|
|
manual_move_offset += diff;
|
|
#else
|
|
current_position[E_AXIS] += diff;
|
|
#endif
|
|
manual_move_to_current(E_AXIS
|
|
#if E_MANUAL > 1
|
|
, eindex
|
|
#endif
|
|
);
|
|
lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
|
|
}
|
|
encoderPosition = 0;
|
|
}
|
|
if (lcdDrawUpdate) {
|
|
PGM_P pos_label;
|
|
#if E_MANUAL == 1
|
|
pos_label = PSTR(MSG_MOVE_E);
|
|
#else
|
|
switch (eindex) {
|
|
default: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E1); break;
|
|
case 1: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E2); break;
|
|
#if E_MANUAL > 2
|
|
case 2: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E3); break;
|
|
#if E_MANUAL > 3
|
|
case 3: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E4); break;
|
|
#if E_MANUAL > 4
|
|
case 4: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E5); break;
|
|
#endif // E_MANUAL > 4
|
|
#endif // E_MANUAL > 3
|
|
#endif // E_MANUAL > 2
|
|
}
|
|
#endif // E_MANUAL > 1
|
|
lcd_implementation_drawedit(pos_label, ftostr41sign(current_position[E_AXIS]
|
|
#if IS_KINEMATIC
|
|
+ manual_move_offset
|
|
#endif
|
|
));
|
|
}
|
|
}
|
|
|
|
void lcd_move_e() { _lcd_move_e(); }
|
|
#if E_MANUAL > 1
|
|
void lcd_move_e0() { _lcd_move_e(0); }
|
|
void lcd_move_e1() { _lcd_move_e(1); }
|
|
#if E_MANUAL > 2
|
|
void lcd_move_e2() { _lcd_move_e(2); }
|
|
#if E_MANUAL > 3
|
|
void lcd_move_e3() { _lcd_move_e(3); }
|
|
#if E_MANUAL > 4
|
|
void lcd_move_e4() { _lcd_move_e(4); }
|
|
#endif // E_MANUAL > 4
|
|
#endif // E_MANUAL > 3
|
|
#endif // E_MANUAL > 2
|
|
#endif // E_MANUAL > 1
|
|
|
|
/**
|
|
*
|
|
* "Prepare" > "Move Xmm" > "Move XYZ" submenu
|
|
*
|
|
*/
|
|
|
|
screenFunc_t _manual_move_func_ptr;
|
|
|
|
void _goto_manual_move(const float scale) {
|
|
defer_return_to_status = true;
|
|
move_menu_scale = scale;
|
|
lcd_goto_screen(_manual_move_func_ptr);
|
|
}
|
|
void lcd_move_menu_10mm() { _goto_manual_move(10.0); }
|
|
void lcd_move_menu_1mm() { _goto_manual_move( 1.0); }
|
|
void lcd_move_menu_01mm() { _goto_manual_move( 0.1); }
|
|
|
|
void _lcd_move_distance_menu(const AxisEnum axis, const screenFunc_t func) {
|
|
_manual_move_func_ptr = func;
|
|
START_MENU();
|
|
if (LCD_HEIGHT >= 4) {
|
|
switch (axis) {
|
|
case X_AXIS:
|
|
STATIC_ITEM(MSG_MOVE_X, true, true); break;
|
|
case Y_AXIS:
|
|
STATIC_ITEM(MSG_MOVE_Y, true, true); break;
|
|
case Z_AXIS:
|
|
STATIC_ITEM(MSG_MOVE_Z, true, true); break;
|
|
default:
|
|
STATIC_ITEM(MSG_MOVE_E, true, true); break;
|
|
}
|
|
}
|
|
MENU_BACK(MSG_MOVE_AXIS);
|
|
MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm);
|
|
MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm);
|
|
MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm);
|
|
END_MENU();
|
|
}
|
|
void lcd_move_get_x_amount() { _lcd_move_distance_menu(X_AXIS, lcd_move_x); }
|
|
void lcd_move_get_y_amount() { _lcd_move_distance_menu(Y_AXIS, lcd_move_y); }
|
|
void lcd_move_get_z_amount() { _lcd_move_distance_menu(Z_AXIS, lcd_move_z); }
|
|
void lcd_move_get_e_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e); }
|
|
#if E_MANUAL > 1
|
|
void lcd_move_get_e0_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e0); }
|
|
void lcd_move_get_e1_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e1); }
|
|
#if E_MANUAL > 2
|
|
void lcd_move_get_e2_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e2); }
|
|
#if E_MANUAL > 3
|
|
void lcd_move_get_e3_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e3); }
|
|
#if E_MANUAL > 4
|
|
void lcd_move_get_e4_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e4); }
|
|
#endif // E_MANUAL > 4
|
|
#endif // E_MANUAL > 3
|
|
#endif // E_MANUAL > 2
|
|
#endif // E_MANUAL > 1
|
|
|
|
/**
|
|
*
|
|
* "Prepare" > "Move Axis" submenu
|
|
*
|
|
*/
|
|
|
|
#if IS_KINEMATIC || ENABLED(NO_MOTION_BEFORE_HOMING)
|
|
#define _MOVE_XYZ_ALLOWED (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS])
|
|
#else
|
|
#define _MOVE_XYZ_ALLOWED true
|
|
#endif
|
|
|
|
#if ENABLED(DELTA)
|
|
#define _MOVE_XY_ALLOWED (current_position[Z_AXIS] <= delta_clip_start_height)
|
|
void lcd_lower_z_to_clip_height() {
|
|
line_to_z(delta_clip_start_height);
|
|
lcd_synchronize();
|
|
}
|
|
#else
|
|
#define _MOVE_XY_ALLOWED true
|
|
#endif
|
|
|
|
void lcd_move_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_PREPARE);
|
|
|
|
#if HAS_SOFTWARE_ENDSTOPS && ENABLED(SOFT_ENDSTOPS_MENU_ITEM)
|
|
MENU_ITEM_EDIT(bool, MSG_LCD_SOFT_ENDSTOPS, &soft_endstops_enabled);
|
|
#endif
|
|
|
|
if (_MOVE_XYZ_ALLOWED) {
|
|
if (_MOVE_XY_ALLOWED) {
|
|
MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_get_x_amount);
|
|
MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_get_y_amount);
|
|
}
|
|
#if ENABLED(DELTA)
|
|
else
|
|
MENU_ITEM(function, MSG_FREE_XY, lcd_lower_z_to_clip_height);
|
|
#endif
|
|
|
|
MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_get_z_amount);
|
|
}
|
|
else
|
|
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
|
|
|
|
#if ENABLED(SWITCHING_EXTRUDER)
|
|
|
|
#if EXTRUDERS == 4
|
|
switch (active_extruder) {
|
|
case 0: MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); break;
|
|
case 1: MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); break;
|
|
case 2: MENU_ITEM(gcode, MSG_SELECT " " MSG_E4, PSTR("T3")); break;
|
|
case 3: MENU_ITEM(gcode, MSG_SELECT " " MSG_E3, PSTR("T2")); break;
|
|
}
|
|
#elif EXTRUDERS == 3
|
|
if (active_extruder < 2) {
|
|
if (active_extruder)
|
|
MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0"));
|
|
else
|
|
MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1"));
|
|
}
|
|
#else
|
|
if (active_extruder)
|
|
MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0"));
|
|
else
|
|
MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1"));
|
|
#endif
|
|
|
|
#elif ENABLED(DUAL_X_CARRIAGE)
|
|
|
|
if (active_extruder)
|
|
MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0"));
|
|
else
|
|
MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1"));
|
|
|
|
#endif
|
|
|
|
MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_get_e_amount);
|
|
#if E_MANUAL > 1
|
|
MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E1, lcd_move_get_e0_amount);
|
|
MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E2, lcd_move_get_e1_amount);
|
|
#if E_MANUAL > 2
|
|
MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E3, lcd_move_get_e2_amount);
|
|
#if E_MANUAL > 3
|
|
MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E4, lcd_move_get_e3_amount);
|
|
#if E_MANUAL > 4
|
|
MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E5, lcd_move_get_e4_amount);
|
|
#endif // E_MANUAL > 4
|
|
#endif // E_MANUAL > 3
|
|
#endif // E_MANUAL > 2
|
|
#endif // E_MANUAL > 1
|
|
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
*
|
|
* "Control" submenu
|
|
*
|
|
*/
|
|
|
|
#if HAS_LCD_CONTRAST
|
|
void lcd_callback_set_contrast() { set_lcd_contrast(lcd_contrast); }
|
|
#endif
|
|
|
|
static void lcd_factory_settings() {
|
|
settings.reset();
|
|
lcd_completion_feedback();
|
|
}
|
|
|
|
#if ENABLED(EEPROM_SETTINGS)
|
|
|
|
static void lcd_init_eeprom() {
|
|
lcd_completion_feedback(settings.init_eeprom());
|
|
lcd_goto_previous_menu();
|
|
}
|
|
|
|
static void lcd_init_eeprom_confirm() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_CONTROL);
|
|
MENU_ITEM(function, MSG_INIT_EEPROM, lcd_init_eeprom);
|
|
END_MENU();
|
|
}
|
|
|
|
#endif
|
|
|
|
void lcd_control_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_MAIN);
|
|
MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
|
|
MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
|
|
|
|
#if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu);
|
|
#elif ENABLED(LIN_ADVANCE)
|
|
MENU_ITEM_EDIT(float52, MSG_ADVANCE_K, &planner.extruder_advance_K, 0, 999);
|
|
#endif
|
|
|
|
#if HAS_LCD_CONTRAST
|
|
MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true);
|
|
#endif
|
|
#if ENABLED(FWRETRACT)
|
|
MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu);
|
|
#endif
|
|
#if ENABLED(DAC_STEPPER_CURRENT)
|
|
MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, lcd_dac_menu);
|
|
#endif
|
|
#if HAS_MOTOR_CURRENT_PWM
|
|
MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, lcd_pwm_menu);
|
|
#endif
|
|
|
|
#if ENABLED(BLTOUCH)
|
|
MENU_ITEM(submenu, MSG_BLTOUCH, bltouch_menu);
|
|
#endif
|
|
|
|
#if ENABLED(EEPROM_SETTINGS)
|
|
MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
|
|
MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings);
|
|
#endif
|
|
|
|
MENU_ITEM(function, MSG_RESTORE_FAILSAFE, lcd_factory_settings);
|
|
|
|
#if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS)
|
|
MENU_ITEM(submenu, MSG_INIT_EEPROM, lcd_init_eeprom_confirm);
|
|
#endif
|
|
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
*
|
|
* "Temperature" submenu
|
|
*
|
|
*/
|
|
|
|
#if ENABLED(PID_AUTOTUNE_MENU)
|
|
|
|
#if ENABLED(PIDTEMP)
|
|
int16_t autotune_temp[HOTENDS] = ARRAY_BY_HOTENDS1(150);
|
|
#endif
|
|
|
|
#if ENABLED(PIDTEMPBED)
|
|
int16_t autotune_temp_bed = 70;
|
|
#endif
|
|
|
|
void _lcd_autotune(int16_t e) {
|
|
char cmd[30];
|
|
sprintf_P(cmd, PSTR("M303 U1 E%i S%i"), e,
|
|
#if HAS_PID_FOR_BOTH
|
|
e < 0 ? autotune_temp_bed : autotune_temp[e]
|
|
#elif ENABLED(PIDTEMPBED)
|
|
autotune_temp_bed
|
|
#else
|
|
autotune_temp[e]
|
|
#endif
|
|
);
|
|
lcd_enqueue_command(cmd);
|
|
}
|
|
|
|
#endif // PID_AUTOTUNE_MENU
|
|
|
|
#if ENABLED(PIDTEMP)
|
|
|
|
// Helpers for editing PID Ki & Kd values
|
|
// grab the PID value out of the temp variable; scale it; then update the PID driver
|
|
void copy_and_scalePID_i(int16_t e) {
|
|
#if DISABLED(PID_PARAMS_PER_HOTEND) || HOTENDS == 1
|
|
UNUSED(e);
|
|
#endif
|
|
PID_PARAM(Ki, e) = scalePID_i(raw_Ki);
|
|
thermalManager.updatePID();
|
|
}
|
|
void copy_and_scalePID_d(int16_t e) {
|
|
#if DISABLED(PID_PARAMS_PER_HOTEND) || HOTENDS == 1
|
|
UNUSED(e);
|
|
#endif
|
|
PID_PARAM(Kd, e) = scalePID_d(raw_Kd);
|
|
thermalManager.updatePID();
|
|
}
|
|
#define _DEFINE_PIDTEMP_BASE_FUNCS(N) \
|
|
void copy_and_scalePID_i_E ## N() { copy_and_scalePID_i(N); } \
|
|
void copy_and_scalePID_d_E ## N() { copy_and_scalePID_d(N); }
|
|
|
|
#if ENABLED(PID_AUTOTUNE_MENU)
|
|
#define DEFINE_PIDTEMP_FUNCS(N) \
|
|
_DEFINE_PIDTEMP_BASE_FUNCS(N); \
|
|
void lcd_autotune_callback_E ## N() { _lcd_autotune(N); } typedef void _pid_##N##_void
|
|
#else
|
|
#define DEFINE_PIDTEMP_FUNCS(N) _DEFINE_PIDTEMP_BASE_FUNCS(N) typedef void _pid_##N##_void
|
|
#endif
|
|
|
|
DEFINE_PIDTEMP_FUNCS(0);
|
|
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
|
#if HOTENDS > 1
|
|
DEFINE_PIDTEMP_FUNCS(1);
|
|
#if HOTENDS > 2
|
|
DEFINE_PIDTEMP_FUNCS(2);
|
|
#if HOTENDS > 3
|
|
DEFINE_PIDTEMP_FUNCS(3);
|
|
#if HOTENDS > 4
|
|
DEFINE_PIDTEMP_FUNCS(4);
|
|
#endif // HOTENDS > 4
|
|
#endif // HOTENDS > 3
|
|
#endif // HOTENDS > 2
|
|
#endif // HOTENDS > 1
|
|
#endif // PID_PARAMS_PER_HOTEND
|
|
|
|
#endif // PIDTEMP
|
|
|
|
/**
|
|
*
|
|
* "Control" > "Temperature" submenu
|
|
*
|
|
*/
|
|
void lcd_control_temperature_menu() {
|
|
START_MENU();
|
|
|
|
//
|
|
// ^ Control
|
|
//
|
|
MENU_BACK(MSG_CONTROL);
|
|
|
|
//
|
|
// Nozzle:
|
|
// Nozzle [1-5]:
|
|
//
|
|
#if HOTENDS == 1
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
|
|
#else // HOTENDS > 1
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N1, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N2, &thermalManager.target_temperature[1], 0, HEATER_1_MAXTEMP - 15, watch_temp_callback_E1);
|
|
#if HOTENDS > 2
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N3, &thermalManager.target_temperature[2], 0, HEATER_2_MAXTEMP - 15, watch_temp_callback_E2);
|
|
#if HOTENDS > 3
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N4, &thermalManager.target_temperature[3], 0, HEATER_3_MAXTEMP - 15, watch_temp_callback_E3);
|
|
#if HOTENDS > 4
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N5, &thermalManager.target_temperature[4], 0, HEATER_4_MAXTEMP - 15, watch_temp_callback_E4);
|
|
#endif // HOTENDS > 4
|
|
#endif // HOTENDS > 3
|
|
#endif // HOTENDS > 2
|
|
#endif // HOTENDS > 1
|
|
|
|
//
|
|
// Bed:
|
|
//
|
|
#if HAS_HEATED_BED
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_BED, &thermalManager.target_temperature_bed, 0, BED_MAXTEMP - 15, watch_temp_callback_bed);
|
|
#endif
|
|
|
|
//
|
|
// Fan Speed:
|
|
//
|
|
#if FAN_COUNT > 0
|
|
#if HAS_FAN0
|
|
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fanSpeeds[0], 0, 255);
|
|
#if ENABLED(EXTRA_FAN_SPEED)
|
|
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fanSpeeds[0], 3, 255);
|
|
#endif
|
|
#endif
|
|
#if HAS_FAN1
|
|
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255);
|
|
#if ENABLED(EXTRA_FAN_SPEED)
|
|
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 2", &new_fanSpeeds[1], 3, 255);
|
|
#endif
|
|
#endif
|
|
#if HAS_FAN2
|
|
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 3", &fanSpeeds[2], 0, 255);
|
|
#if ENABLED(EXTRA_FAN_SPEED)
|
|
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 3", &new_fanSpeeds[2], 3, 255);
|
|
#endif
|
|
#endif
|
|
#endif // FAN_COUNT > 0
|
|
|
|
//
|
|
// Autotemp, Min, Max, Fact
|
|
//
|
|
#if ENABLED(AUTOTEMP) && HAS_TEMP_HOTEND
|
|
MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &planner.autotemp_enabled);
|
|
MENU_ITEM_EDIT(float3, MSG_MIN, &planner.autotemp_min, 0, HEATER_0_MAXTEMP - 15);
|
|
MENU_ITEM_EDIT(float3, MSG_MAX, &planner.autotemp_max, 0, HEATER_0_MAXTEMP - 15);
|
|
MENU_ITEM_EDIT(float52, MSG_FACTOR, &planner.autotemp_factor, 0.0, 1.0);
|
|
#endif
|
|
|
|
//
|
|
// PID-P, PID-I, PID-D, PID-C, PID Autotune
|
|
// PID-P E1, PID-I E1, PID-D E1, PID-C E1, PID Autotune E1
|
|
// PID-P E2, PID-I E2, PID-D E2, PID-C E2, PID Autotune E2
|
|
// PID-P E3, PID-I E3, PID-D E3, PID-C E3, PID Autotune E3
|
|
// PID-P E4, PID-I E4, PID-D E4, PID-C E4, PID Autotune E4
|
|
// PID-P E5, PID-I E5, PID-D E5, PID-C E5, PID Autotune E5
|
|
//
|
|
#if ENABLED(PIDTEMP)
|
|
|
|
#define _PID_BASE_MENU_ITEMS(ELABEL, eindex) \
|
|
raw_Ki = unscalePID_i(PID_PARAM(Ki, eindex)); \
|
|
raw_Kd = unscalePID_d(PID_PARAM(Kd, eindex)); \
|
|
MENU_ITEM_EDIT(float52sign, MSG_PID_P ELABEL, &PID_PARAM(Kp, eindex), 1, 9990); \
|
|
MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_PID_I ELABEL, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E ## eindex); \
|
|
MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_PID_D ELABEL, &raw_Kd, 1, 9990, copy_and_scalePID_d_E ## eindex)
|
|
|
|
#if ENABLED(PID_EXTRUSION_SCALING)
|
|
#define _PID_MENU_ITEMS(ELABEL, eindex) \
|
|
_PID_BASE_MENU_ITEMS(ELABEL, eindex); \
|
|
MENU_ITEM_EDIT(float3, MSG_PID_C ELABEL, &PID_PARAM(Kc, eindex), 1, 9990)
|
|
#else
|
|
#define _PID_MENU_ITEMS(ELABEL, eindex) _PID_BASE_MENU_ITEMS(ELABEL, eindex)
|
|
#endif
|
|
|
|
#if ENABLED(PID_AUTOTUNE_MENU)
|
|
#define PID_MENU_ITEMS(ELABEL, eindex) \
|
|
_PID_MENU_ITEMS(ELABEL, eindex); \
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_PID_AUTOTUNE ELABEL, &autotune_temp[eindex], 150, heater_maxtemp[eindex] - 15, lcd_autotune_callback_E ## eindex)
|
|
#else
|
|
#define PID_MENU_ITEMS(ELABEL, eindex) _PID_MENU_ITEMS(ELABEL, eindex)
|
|
#endif
|
|
|
|
#if ENABLED(PID_PARAMS_PER_HOTEND) && HOTENDS > 1
|
|
PID_MENU_ITEMS(" " MSG_E1, 0);
|
|
PID_MENU_ITEMS(" " MSG_E2, 1);
|
|
#if HOTENDS > 2
|
|
PID_MENU_ITEMS(" " MSG_E3, 2);
|
|
#if HOTENDS > 3
|
|
PID_MENU_ITEMS(" " MSG_E4, 3);
|
|
#if HOTENDS > 4
|
|
PID_MENU_ITEMS(" " MSG_E5, 4);
|
|
#endif // HOTENDS > 4
|
|
#endif // HOTENDS > 3
|
|
#endif // HOTENDS > 2
|
|
#else // !PID_PARAMS_PER_HOTEND || HOTENDS == 1
|
|
PID_MENU_ITEMS("", 0);
|
|
#endif // !PID_PARAMS_PER_HOTEND || HOTENDS == 1
|
|
|
|
#endif // PIDTEMP
|
|
|
|
#if DISABLED(SLIM_LCD_MENUS)
|
|
//
|
|
// Preheat Material 1 conf
|
|
//
|
|
MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, lcd_control_temperature_preheat_material1_settings_menu);
|
|
|
|
//
|
|
// Preheat Material 2 conf
|
|
//
|
|
MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, lcd_control_temperature_preheat_material2_settings_menu);
|
|
#endif
|
|
|
|
END_MENU();
|
|
}
|
|
|
|
#if DISABLED(SLIM_LCD_MENUS)
|
|
|
|
void _lcd_control_temperature_preheat_settings_menu(const uint8_t material) {
|
|
#if HOTENDS > 4
|
|
#define MINTEMP_ALL MIN5(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP)
|
|
#define MAXTEMP_ALL MAX5(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP)
|
|
#elif HOTENDS > 3
|
|
#define MINTEMP_ALL MIN4(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP)
|
|
#define MAXTEMP_ALL MAX4(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP)
|
|
#elif HOTENDS > 2
|
|
#define MINTEMP_ALL MIN3(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP)
|
|
#define MAXTEMP_ALL MAX3(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP)
|
|
#elif HOTENDS > 1
|
|
#define MINTEMP_ALL min(HEATER_0_MINTEMP, HEATER_1_MINTEMP)
|
|
#define MAXTEMP_ALL max(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP)
|
|
#else
|
|
#define MINTEMP_ALL HEATER_0_MINTEMP
|
|
#define MAXTEMP_ALL HEATER_0_MAXTEMP
|
|
#endif
|
|
START_MENU();
|
|
MENU_BACK(MSG_TEMPERATURE);
|
|
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255);
|
|
#if HAS_TEMP_HOTEND
|
|
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15);
|
|
#endif
|
|
#if HAS_HEATED_BED
|
|
MENU_ITEM_EDIT(int3, MSG_BED, &lcd_preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 15);
|
|
#endif
|
|
#if ENABLED(EEPROM_SETTINGS)
|
|
MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
|
|
#endif
|
|
END_MENU();
|
|
}
|
|
|
|
/**
|
|
*
|
|
* "Temperature" > "Preheat Material 1 conf" submenu
|
|
*
|
|
*/
|
|
void lcd_control_temperature_preheat_material1_settings_menu() { _lcd_control_temperature_preheat_settings_menu(0); }
|
|
|
|
/**
|
|
*
|
|
* "Temperature" > "Preheat Material 2 conf" submenu
|
|
*
|
|
*/
|
|
void lcd_control_temperature_preheat_material2_settings_menu() { _lcd_control_temperature_preheat_settings_menu(1); }
|
|
|
|
void _reset_acceleration_rates() { planner.reset_acceleration_rates(); }
|
|
#if ENABLED(DISTINCT_E_FACTORS)
|
|
void _reset_e_acceleration_rate(const uint8_t e) { if (e == active_extruder) _reset_acceleration_rates(); }
|
|
void _reset_e0_acceleration_rate() { _reset_e_acceleration_rate(0); }
|
|
void _reset_e1_acceleration_rate() { _reset_e_acceleration_rate(1); }
|
|
#if E_STEPPERS > 2
|
|
void _reset_e2_acceleration_rate() { _reset_e_acceleration_rate(2); }
|
|
#if E_STEPPERS > 3
|
|
void _reset_e3_acceleration_rate() { _reset_e_acceleration_rate(3); }
|
|
#if E_STEPPERS > 4
|
|
void _reset_e4_acceleration_rate() { _reset_e_acceleration_rate(4); }
|
|
#endif // E_STEPPERS > 4
|
|
#endif // E_STEPPERS > 3
|
|
#endif // E_STEPPERS > 2
|
|
#endif
|
|
|
|
void _planner_refresh_positioning() { planner.refresh_positioning(); }
|
|
#if ENABLED(DISTINCT_E_FACTORS)
|
|
void _planner_refresh_e_positioning(const uint8_t e) {
|
|
if (e == active_extruder)
|
|
_planner_refresh_positioning();
|
|
else
|
|
planner.steps_to_mm[E_AXIS + e] = 1.0 / planner.axis_steps_per_mm[E_AXIS + e];
|
|
}
|
|
void _planner_refresh_e0_positioning() { _planner_refresh_e_positioning(0); }
|
|
void _planner_refresh_e1_positioning() { _planner_refresh_e_positioning(1); }
|
|
#if E_STEPPERS > 2
|
|
void _planner_refresh_e2_positioning() { _planner_refresh_e_positioning(2); }
|
|
#if E_STEPPERS > 3
|
|
void _planner_refresh_e3_positioning() { _planner_refresh_e_positioning(3); }
|
|
#if E_STEPPERS > 4
|
|
void _planner_refresh_e4_positioning() { _planner_refresh_e_positioning(4); }
|
|
#endif // E_STEPPERS > 4
|
|
#endif // E_STEPPERS > 3
|
|
#endif // E_STEPPERS > 2
|
|
#endif
|
|
|
|
// M203 / M205 Velocity options
|
|
void lcd_control_motion_velocity_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_MOTION);
|
|
|
|
// M203 Max Feedrate
|
|
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_A, &planner.max_feedrate_mm_s[A_AXIS], 1, 999);
|
|
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_B, &planner.max_feedrate_mm_s[B_AXIS], 1, 999);
|
|
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_C, &planner.max_feedrate_mm_s[C_AXIS], 1, 999);
|
|
|
|
#if ENABLED(DISTINCT_E_FACTORS)
|
|
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS + active_extruder], 1, 999);
|
|
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E1, &planner.max_feedrate_mm_s[E_AXIS], 1, 999);
|
|
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E2, &planner.max_feedrate_mm_s[E_AXIS + 1], 1, 999);
|
|
#if E_STEPPERS > 2
|
|
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E3, &planner.max_feedrate_mm_s[E_AXIS + 2], 1, 999);
|
|
#if E_STEPPERS > 3
|
|
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E4, &planner.max_feedrate_mm_s[E_AXIS + 3], 1, 999);
|
|
#if E_STEPPERS > 4
|
|
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E5, &planner.max_feedrate_mm_s[E_AXIS + 4], 1, 999);
|
|
#endif // E_STEPPERS > 4
|
|
#endif // E_STEPPERS > 3
|
|
#endif // E_STEPPERS > 2
|
|
#else
|
|
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS], 1, 999);
|
|
#endif
|
|
|
|
// M205 S Min Feedrate
|
|
MENU_ITEM_EDIT(float3, MSG_VMIN, &planner.min_feedrate_mm_s, 0, 999);
|
|
|
|
// M205 T Min Travel Feedrate
|
|
MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &planner.min_travel_feedrate_mm_s, 0, 999);
|
|
|
|
END_MENU();
|
|
}
|
|
|
|
// M201 / M204 Accelerations
|
|
void lcd_control_motion_acceleration_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_MOTION);
|
|
|
|
// M204 P Acceleration
|
|
MENU_ITEM_EDIT(float5, MSG_ACC, &planner.acceleration, 10, 99000);
|
|
|
|
// M204 R Retract Acceleration
|
|
MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &planner.retract_acceleration, 100, 99000);
|
|
|
|
// M204 T Travel Acceleration
|
|
MENU_ITEM_EDIT(float5, MSG_A_TRAVEL, &planner.travel_acceleration, 100, 99000);
|
|
|
|
// M201 settings
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_A, &planner.max_acceleration_mm_per_s2[A_AXIS], 100, 99000, _reset_acceleration_rates);
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_B, &planner.max_acceleration_mm_per_s2[B_AXIS], 100, 99000, _reset_acceleration_rates);
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_C, &planner.max_acceleration_mm_per_s2[C_AXIS], 10, 99000, _reset_acceleration_rates);
|
|
|
|
#if ENABLED(DISTINCT_E_FACTORS)
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS + active_extruder], 100, 99000, _reset_acceleration_rates);
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E1, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_e0_acceleration_rate);
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E2, &planner.max_acceleration_mm_per_s2[E_AXIS + 1], 100, 99000, _reset_e1_acceleration_rate);
|
|
#if E_STEPPERS > 2
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E3, &planner.max_acceleration_mm_per_s2[E_AXIS + 2], 100, 99000, _reset_e2_acceleration_rate);
|
|
#if E_STEPPERS > 3
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E4, &planner.max_acceleration_mm_per_s2[E_AXIS + 3], 100, 99000, _reset_e3_acceleration_rate);
|
|
#if E_STEPPERS > 4
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E5, &planner.max_acceleration_mm_per_s2[E_AXIS + 4], 100, 99000, _reset_e4_acceleration_rate);
|
|
#endif // E_STEPPERS > 4
|
|
#endif // E_STEPPERS > 3
|
|
#endif // E_STEPPERS > 2
|
|
#else
|
|
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_acceleration_rates);
|
|
#endif
|
|
|
|
END_MENU();
|
|
}
|
|
|
|
// M205 Jerk
|
|
void lcd_control_motion_jerk_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_MOTION);
|
|
|
|
MENU_ITEM_EDIT(float3, MSG_VA_JERK, &planner.max_jerk[A_AXIS], 1, 990);
|
|
MENU_ITEM_EDIT(float3, MSG_VB_JERK, &planner.max_jerk[B_AXIS], 1, 990);
|
|
#if ENABLED(DELTA)
|
|
MENU_ITEM_EDIT(float3, MSG_VC_JERK, &planner.max_jerk[C_AXIS], 1, 990);
|
|
#else
|
|
MENU_ITEM_EDIT(float52sign, MSG_VC_JERK, &planner.max_jerk[C_AXIS], 0.1, 990);
|
|
#endif
|
|
MENU_ITEM_EDIT(float3, MSG_VE_JERK, &planner.max_jerk[E_AXIS], 1, 990);
|
|
|
|
END_MENU();
|
|
}
|
|
|
|
// M92 Steps-per-mm
|
|
void lcd_control_motion_steps_per_mm_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_MOTION);
|
|
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ASTEPS, &planner.axis_steps_per_mm[A_AXIS], 5, 9999, _planner_refresh_positioning);
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_BSTEPS, &planner.axis_steps_per_mm[B_AXIS], 5, 9999, _planner_refresh_positioning);
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_CSTEPS, &planner.axis_steps_per_mm[C_AXIS], 5, 9999, _planner_refresh_positioning);
|
|
|
|
#if ENABLED(DISTINCT_E_FACTORS)
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS + active_extruder], 5, 9999, _planner_refresh_positioning);
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E1STEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_e0_positioning);
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E2STEPS, &planner.axis_steps_per_mm[E_AXIS + 1], 5, 9999, _planner_refresh_e1_positioning);
|
|
#if E_STEPPERS > 2
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E3STEPS, &planner.axis_steps_per_mm[E_AXIS + 2], 5, 9999, _planner_refresh_e2_positioning);
|
|
#if E_STEPPERS > 3
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E4STEPS, &planner.axis_steps_per_mm[E_AXIS + 3], 5, 9999, _planner_refresh_e3_positioning);
|
|
#if E_STEPPERS > 4
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E5STEPS, &planner.axis_steps_per_mm[E_AXIS + 4], 5, 9999, _planner_refresh_e4_positioning);
|
|
#endif // E_STEPPERS > 4
|
|
#endif // E_STEPPERS > 3
|
|
#endif // E_STEPPERS > 2
|
|
#else
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning);
|
|
#endif
|
|
|
|
END_MENU();
|
|
}
|
|
|
|
#endif // !SLIM_LCD_MENUS
|
|
|
|
/**
|
|
*
|
|
* "Control" > "Motion" submenu
|
|
*
|
|
*/
|
|
|
|
void lcd_control_motion_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_CONTROL);
|
|
|
|
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
|
MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset);
|
|
#elif HAS_BED_PROBE
|
|
MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
|
|
#endif
|
|
|
|
#if DISABLED(SLIM_LCD_MENUS)
|
|
|
|
// M203 / M205 - Feedrate items
|
|
MENU_ITEM(submenu, MSG_VELOCITY, lcd_control_motion_velocity_menu);
|
|
|
|
// M201 - Acceleration items
|
|
MENU_ITEM(submenu, MSG_ACCELERATION, lcd_control_motion_acceleration_menu);
|
|
|
|
// M205 - Max Jerk
|
|
MENU_ITEM(submenu, MSG_JERK, lcd_control_motion_jerk_menu);
|
|
|
|
// M92 - Steps Per mm
|
|
MENU_ITEM(submenu, MSG_STEPS_PER_MM, lcd_control_motion_steps_per_mm_menu);
|
|
|
|
#endif // !SLIM_LCD_MENUS
|
|
|
|
// M540 S - Abort on endstop hit when SD printing
|
|
#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
|
|
MENU_ITEM_EDIT(bool, MSG_ENDSTOP_ABORT, &stepper.abort_on_endstop_hit);
|
|
#endif
|
|
|
|
END_MENU();
|
|
}
|
|
|
|
#if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
/**
|
|
*
|
|
* "Control" > "Filament" submenu
|
|
*
|
|
*/
|
|
void lcd_control_filament_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_CONTROL);
|
|
|
|
#if ENABLED(LIN_ADVANCE)
|
|
MENU_ITEM_EDIT(float52, MSG_ADVANCE_K, &planner.extruder_advance_K, 0, 999);
|
|
#endif
|
|
|
|
#if DISABLED(NO_VOLUMETRICS)
|
|
MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &parser.volumetric_enabled, planner.calculate_volumetric_multipliers);
|
|
|
|
if (parser.volumetric_enabled) {
|
|
#if EXTRUDERS == 1
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &planner.filament_size[0], 1.5, 3.25, planner.calculate_volumetric_multipliers);
|
|
#else // EXTRUDERS > 1
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &planner.filament_size[active_extruder], 1.5, 3.25, planner.calculate_volumetric_multipliers);
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E1, &planner.filament_size[0], 1.5, 3.25, planner.calculate_volumetric_multipliers);
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E2, &planner.filament_size[1], 1.5, 3.25, planner.calculate_volumetric_multipliers);
|
|
#if EXTRUDERS > 2
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E3, &planner.filament_size[2], 1.5, 3.25, planner.calculate_volumetric_multipliers);
|
|
#if EXTRUDERS > 3
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E4, &planner.filament_size[3], 1.5, 3.25, planner.calculate_volumetric_multipliers);
|
|
#if EXTRUDERS > 4
|
|
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E5, &planner.filament_size[4], 1.5, 3.25, planner.calculate_volumetric_multipliers);
|
|
#endif // EXTRUDERS > 4
|
|
#endif // EXTRUDERS > 3
|
|
#endif // EXTRUDERS > 2
|
|
#endif // EXTRUDERS > 1
|
|
}
|
|
#endif
|
|
|
|
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
const float extrude_maxlength =
|
|
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
|
|
EXTRUDE_MAXLENGTH
|
|
#else
|
|
999.0f
|
|
#endif
|
|
;
|
|
|
|
#if EXTRUDERS == 1
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD, &filament_change_unload_length[0], 0.0, extrude_maxlength);
|
|
#else // EXTRUDERS > 1
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD, &filament_change_unload_length[active_extruder], 0.0, extrude_maxlength);
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E1, &filament_change_unload_length[0], 0.0, extrude_maxlength);
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E2, &filament_change_unload_length[1], 0.0, extrude_maxlength);
|
|
#if EXTRUDERS > 2
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E3, &filament_change_unload_length[2], 0.0, extrude_maxlength);
|
|
#if EXTRUDERS > 3
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E4, &filament_change_unload_length[3], 0.0, extrude_maxlength);
|
|
#if EXTRUDERS > 4
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E5, &filament_change_unload_length[4], 0.0, extrude_maxlength);
|
|
#endif // EXTRUDERS > 4
|
|
#endif // EXTRUDERS > 3
|
|
#endif // EXTRUDERS > 2
|
|
#endif // EXTRUDERS > 1
|
|
|
|
#if EXTRUDERS == 1
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD, &filament_change_load_length[0], 0.0, extrude_maxlength);
|
|
#else // EXTRUDERS > 1
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD, &filament_change_load_length[active_extruder], 0.0, extrude_maxlength);
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E1, &filament_change_load_length[0], 0.0, extrude_maxlength);
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E2, &filament_change_load_length[1], 0.0, extrude_maxlength);
|
|
#if EXTRUDERS > 2
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E3, &filament_change_load_length[2], 0.0, extrude_maxlength);
|
|
#if EXTRUDERS > 3
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E4, &filament_change_load_length[3], 0.0, extrude_maxlength);
|
|
#if EXTRUDERS > 4
|
|
MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E5, &filament_change_load_length[4], 0.0, extrude_maxlength);
|
|
#endif // EXTRUDERS > 4
|
|
#endif // EXTRUDERS > 3
|
|
#endif // EXTRUDERS > 2
|
|
#endif // EXTRUDERS > 1
|
|
#endif
|
|
|
|
END_MENU();
|
|
}
|
|
#endif // !NO_VOLUMETRICS || ADVANCED_PAUSE_FEATURE
|
|
|
|
/**
|
|
*
|
|
* "Control" > "Retract" submenu
|
|
*
|
|
*/
|
|
#if ENABLED(FWRETRACT)
|
|
|
|
void lcd_control_retract_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_CONTROL);
|
|
MENU_ITEM_EDIT_CALLBACK(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract);
|
|
MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT, &fwretract.retract_length, 0, 100);
|
|
#if EXTRUDERS > 1
|
|
MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.swap_retract_length, 0, 100);
|
|
#endif
|
|
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &fwretract.retract_feedrate_mm_s, 1, 999);
|
|
MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_ZLIFT, &fwretract.retract_zlift, 0, 999);
|
|
MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER, &fwretract.retract_recover_length, -100, 100);
|
|
#if EXTRUDERS > 1
|
|
MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER_SWAP, &fwretract.swap_retract_recover_length, -100, 100);
|
|
#endif
|
|
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &fwretract.retract_recover_feedrate_mm_s, 1, 999);
|
|
#if EXTRUDERS > 1
|
|
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVER_SWAPF, &fwretract.swap_retract_recover_feedrate_mm_s, 1, 999);
|
|
#endif
|
|
END_MENU();
|
|
}
|
|
|
|
#endif // FWRETRACT
|
|
|
|
#if ENABLED(SDSUPPORT)
|
|
|
|
#if !PIN_EXISTS(SD_DETECT)
|
|
void lcd_sd_refresh() {
|
|
card.initsd();
|
|
encoderTopLine = 0;
|
|
}
|
|
#endif
|
|
|
|
void lcd_sd_updir() {
|
|
encoderPosition = card.updir() ? ENCODER_STEPS_PER_MENU_ITEM : 0;
|
|
encoderTopLine = 0;
|
|
screen_changed = true;
|
|
lcd_refresh();
|
|
}
|
|
|
|
/**
|
|
*
|
|
* "Print from SD" submenu
|
|
*
|
|
*/
|
|
|
|
#if ENABLED(SD_REPRINT_LAST_SELECTED_FILE)
|
|
uint32_t last_sdfile_encoderPosition = 0xFFFF;
|
|
|
|
void lcd_reselect_last_file() {
|
|
if (last_sdfile_encoderPosition == 0xFFFF) return;
|
|
#if ENABLED(DOGLCD)
|
|
// Some of this is a hack to force the screen update to work.
|
|
// TODO: Fix the real issue that causes this!
|
|
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
|
|
_lcd_synchronize();
|
|
safe_delay(50);
|
|
_lcd_synchronize();
|
|
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
|
|
drawing_screen = screen_changed = true;
|
|
#endif
|
|
|
|
lcd_goto_screen(lcd_sdcard_menu, last_sdfile_encoderPosition);
|
|
defer_return_to_status = true;
|
|
last_sdfile_encoderPosition = 0xFFFF;
|
|
|
|
#if ENABLED(DOGLCD)
|
|
lcd_update();
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
void lcd_sdcard_menu() {
|
|
ENCODER_DIRECTION_MENUS();
|
|
|
|
const uint16_t fileCnt = card.get_num_Files();
|
|
|
|
START_MENU();
|
|
MENU_BACK(MSG_MAIN);
|
|
card.getWorkDirName();
|
|
if (card.filename[0] == '/') {
|
|
#if !PIN_EXISTS(SD_DETECT)
|
|
MENU_ITEM(function, LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh);
|
|
#endif
|
|
}
|
|
else {
|
|
MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir);
|
|
}
|
|
|
|
for (uint16_t i = 0; i < fileCnt; i++) {
|
|
if (_menuLineNr == _thisItemNr) {
|
|
const uint16_t nr =
|
|
#if ENABLED(SDCARD_RATHERRECENTFIRST) && DISABLED(SDCARD_SORT_ALPHA)
|
|
fileCnt - 1 -
|
|
#endif
|
|
i;
|
|
|
|
#if ENABLED(SDCARD_SORT_ALPHA)
|
|
card.getfilename_sorted(nr);
|
|
#else
|
|
card.getfilename(nr);
|
|
#endif
|
|
|
|
if (card.filenameIsDir)
|
|
MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename);
|
|
else
|
|
MENU_ITEM(sdfile, MSG_CARD_MENU, card.filename, card.longFilename);
|
|
}
|
|
else {
|
|
MENU_ITEM_DUMMY();
|
|
}
|
|
}
|
|
END_MENU();
|
|
}
|
|
|
|
#endif // SDSUPPORT
|
|
|
|
#if ENABLED(LCD_INFO_MENU)
|
|
|
|
#if ENABLED(PRINTCOUNTER)
|
|
/**
|
|
*
|
|
* About Printer > Statistics submenu
|
|
*
|
|
*/
|
|
void lcd_info_stats_menu() {
|
|
if (use_click()) { return lcd_goto_previous_menu(); }
|
|
|
|
char buffer[21];
|
|
printStatistics stats = print_job_timer.getStats();
|
|
|
|
START_SCREEN(); // 12345678901234567890
|
|
STATIC_ITEM(MSG_INFO_PRINT_COUNT ": ", false, false, itostr3left(stats.totalPrints)); // Print Count: 999
|
|
STATIC_ITEM(MSG_INFO_COMPLETED_PRINTS": ", false, false, itostr3left(stats.finishedPrints)); // Completed : 666
|
|
|
|
duration_t elapsed = stats.printTime;
|
|
elapsed.toString(buffer);
|
|
|
|
STATIC_ITEM(MSG_INFO_PRINT_TIME ": ", false, false); // Total print Time:
|
|
STATIC_ITEM("", false, false, buffer); // 99y 364d 23h 59m 59s
|
|
|
|
elapsed = stats.longestPrint;
|
|
elapsed.toString(buffer);
|
|
|
|
STATIC_ITEM(MSG_INFO_PRINT_LONGEST ": ", false, false); // Longest job time:
|
|
STATIC_ITEM("", false, false, buffer); // 99y 364d 23h 59m 59s
|
|
|
|
sprintf_P(buffer, PSTR("%ld.%im"), long(stats.filamentUsed / 1000), int16_t(stats.filamentUsed / 100) % 10);
|
|
STATIC_ITEM(MSG_INFO_PRINT_FILAMENT ": ", false, false); // Extruded total:
|
|
STATIC_ITEM("", false, false, buffer); // 125m
|
|
END_SCREEN();
|
|
}
|
|
#endif // PRINTCOUNTER
|
|
|
|
/**
|
|
*
|
|
* About Printer > Thermistors
|
|
*
|
|
*/
|
|
void lcd_info_thermistors_menu() {
|
|
if (use_click()) { return lcd_goto_previous_menu(); }
|
|
START_SCREEN();
|
|
#define THERMISTOR_ID TEMP_SENSOR_0
|
|
#include "thermistornames.h"
|
|
STATIC_ITEM("T0: " THERMISTOR_NAME, false, true);
|
|
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_0_MINTEMP), false);
|
|
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_0_MAXTEMP), false);
|
|
|
|
#if TEMP_SENSOR_1 != 0
|
|
#undef THERMISTOR_ID
|
|
#define THERMISTOR_ID TEMP_SENSOR_1
|
|
#include "thermistornames.h"
|
|
STATIC_ITEM("T1: " THERMISTOR_NAME, false, true);
|
|
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_1_MINTEMP), false);
|
|
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_1_MAXTEMP), false);
|
|
#endif
|
|
|
|
#if TEMP_SENSOR_2 != 0
|
|
#undef THERMISTOR_ID
|
|
#define THERMISTOR_ID TEMP_SENSOR_2
|
|
#include "thermistornames.h"
|
|
STATIC_ITEM("T2: " THERMISTOR_NAME, false, true);
|
|
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_2_MINTEMP), false);
|
|
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_2_MAXTEMP), false);
|
|
#endif
|
|
|
|
#if TEMP_SENSOR_3 != 0
|
|
#undef THERMISTOR_ID
|
|
#define THERMISTOR_ID TEMP_SENSOR_3
|
|
#include "thermistornames.h"
|
|
STATIC_ITEM("T3: " THERMISTOR_NAME, false, true);
|
|
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_3_MINTEMP), false);
|
|
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_3_MAXTEMP), false);
|
|
#endif
|
|
|
|
#if TEMP_SENSOR_4 != 0
|
|
#undef THERMISTOR_ID
|
|
#define THERMISTOR_ID TEMP_SENSOR_4
|
|
#include "thermistornames.h"
|
|
STATIC_ITEM("T4: " THERMISTOR_NAME, false, true);
|
|
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_4_MINTEMP), false);
|
|
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_4_MAXTEMP), false);
|
|
#endif
|
|
|
|
#if HAS_HEATED_BED
|
|
#undef THERMISTOR_ID
|
|
#define THERMISTOR_ID TEMP_SENSOR_BED
|
|
#include "thermistornames.h"
|
|
STATIC_ITEM("TBed:" THERMISTOR_NAME, false, true);
|
|
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(BED_MINTEMP), false);
|
|
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(BED_MAXTEMP), false);
|
|
#endif
|
|
END_SCREEN();
|
|
}
|
|
|
|
/**
|
|
*
|
|
* About Printer > Board Info
|
|
*
|
|
*/
|
|
void lcd_info_board_menu() {
|
|
if (use_click()) { return lcd_goto_previous_menu(); }
|
|
START_SCREEN();
|
|
STATIC_ITEM(BOARD_NAME, true, true); // MyPrinterController
|
|
STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000
|
|
STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION, true); // Protocol: 1.0
|
|
#if POWER_SUPPLY == 0
|
|
STATIC_ITEM(MSG_INFO_PSU ": Generic", true);
|
|
#elif POWER_SUPPLY == 1
|
|
STATIC_ITEM(MSG_INFO_PSU ": ATX", true); // Power Supply: ATX
|
|
#elif POWER_SUPPLY == 2
|
|
STATIC_ITEM(MSG_INFO_PSU ": XBox", true); // Power Supply: XBox
|
|
#endif
|
|
END_SCREEN();
|
|
}
|
|
|
|
/**
|
|
*
|
|
* About Printer > Printer Info
|
|
*
|
|
*/
|
|
void lcd_info_printer_menu() {
|
|
if (use_click()) { return lcd_goto_previous_menu(); }
|
|
START_SCREEN();
|
|
STATIC_ITEM(MSG_MARLIN, true, true); // Marlin
|
|
STATIC_ITEM(SHORT_BUILD_VERSION, true); // x.x.x-Branch
|
|
STATIC_ITEM(STRING_DISTRIBUTION_DATE, true); // YYYY-MM-DD HH:MM
|
|
STATIC_ITEM(MACHINE_NAME, true); // My3DPrinter
|
|
STATIC_ITEM(WEBSITE_URL, true); // www.my3dprinter.com
|
|
STATIC_ITEM(MSG_INFO_EXTRUDERS ": " STRINGIFY(EXTRUDERS), true); // Extruders: 2
|
|
#if ENABLED(AUTO_BED_LEVELING_3POINT)
|
|
STATIC_ITEM(MSG_3POINT_LEVELING, true); // 3-Point Leveling
|
|
#elif ENABLED(AUTO_BED_LEVELING_LINEAR)
|
|
STATIC_ITEM(MSG_LINEAR_LEVELING, true); // Linear Leveling
|
|
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
|
STATIC_ITEM(MSG_BILINEAR_LEVELING, true); // Bi-linear Leveling
|
|
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
|
STATIC_ITEM(MSG_UBL_LEVELING, true); // Unified Bed Leveling
|
|
#elif ENABLED(MESH_BED_LEVELING)
|
|
STATIC_ITEM(MSG_MESH_LEVELING, true); // Mesh Leveling
|
|
#endif
|
|
END_SCREEN();
|
|
}
|
|
|
|
/**
|
|
*
|
|
* "About Printer" submenu
|
|
*
|
|
*/
|
|
void lcd_info_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_MAIN);
|
|
MENU_ITEM(submenu, MSG_INFO_PRINTER_MENU, lcd_info_printer_menu); // Printer Info >
|
|
MENU_ITEM(submenu, MSG_INFO_BOARD_MENU, lcd_info_board_menu); // Board Info >
|
|
MENU_ITEM(submenu, MSG_INFO_THERMISTOR_MENU, lcd_info_thermistors_menu); // Thermistors >
|
|
#if ENABLED(PRINTCOUNTER)
|
|
MENU_ITEM(submenu, MSG_INFO_STATS_MENU, lcd_info_stats_menu); // Printer Statistics >
|
|
#endif
|
|
END_MENU();
|
|
}
|
|
#endif // LCD_INFO_MENU
|
|
|
|
/**
|
|
*
|
|
* LED Menu
|
|
*
|
|
*/
|
|
|
|
#if ENABLED(LED_CONTROL_MENU)
|
|
|
|
#if ENABLED(LED_COLOR_PRESETS)
|
|
|
|
void lcd_led_presets_menu() {
|
|
START_MENU();
|
|
#if LCD_HEIGHT > 2
|
|
STATIC_ITEM(MSG_LED_PRESETS, true, true);
|
|
#endif
|
|
MENU_BACK(MSG_LED_CONTROL);
|
|
MENU_ITEM(function, MSG_SET_LEDS_WHITE, leds.set_white);
|
|
MENU_ITEM(function, MSG_SET_LEDS_RED, leds.set_red);
|
|
MENU_ITEM(function, MSG_SET_LEDS_ORANGE, leds.set_orange);
|
|
MENU_ITEM(function, MSG_SET_LEDS_YELLOW,leds.set_yellow);
|
|
MENU_ITEM(function, MSG_SET_LEDS_GREEN, leds.set_green);
|
|
MENU_ITEM(function, MSG_SET_LEDS_BLUE, leds.set_blue);
|
|
MENU_ITEM(function, MSG_SET_LEDS_INDIGO, leds.set_indigo);
|
|
MENU_ITEM(function, MSG_SET_LEDS_VIOLET, leds.set_violet);
|
|
END_MENU();
|
|
}
|
|
#endif // LED_COLOR_PRESETS
|
|
|
|
void lcd_led_custom_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_LED_CONTROL);
|
|
MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_R, &leds.color.r, 0, 255, leds.update, true);
|
|
MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_G, &leds.color.g, 0, 255, leds.update, true);
|
|
MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_B, &leds.color.b, 0, 255, leds.update, true);
|
|
#if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
|
|
MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_W, &leds.color.w, 0, 255, leds.update, true);
|
|
#if ENABLED(NEOPIXEL_LED)
|
|
MENU_ITEM_EDIT_CALLBACK(int8, MSG_LED_BRIGHTNESS, &leds.color.i, 0, 255, leds.update, true);
|
|
#endif
|
|
#endif
|
|
END_MENU();
|
|
}
|
|
|
|
void lcd_led_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_MAIN);
|
|
if (leds.lights_on)
|
|
MENU_ITEM(function, MSG_LEDS_OFF, leds.toggle);
|
|
else
|
|
MENU_ITEM(function, MSG_LEDS_ON, leds.toggle);
|
|
MENU_ITEM(function, MSG_SET_LEDS_DEFAULT, leds.set_default);
|
|
#if ENABLED(LED_COLOR_PRESETS)
|
|
MENU_ITEM(submenu, MSG_LED_PRESETS, lcd_led_presets_menu);
|
|
#endif
|
|
MENU_ITEM(submenu, MSG_CUSTOM_LEDS, lcd_led_custom_menu);
|
|
END_MENU();
|
|
}
|
|
|
|
#endif // LED_CONTROL_MENU
|
|
|
|
/**
|
|
*
|
|
* Filament Change Feature Screens
|
|
*
|
|
*/
|
|
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
|
|
/**
|
|
*
|
|
* "Change Filament" > "Change/Unload/Load Filament" submenu
|
|
*
|
|
*/
|
|
static AdvancedPauseMode _change_filament_temp_mode;
|
|
static int8_t _change_filament_temp_extruder;
|
|
|
|
static const char* _change_filament_temp_command() {
|
|
switch (_change_filament_temp_mode) {
|
|
case ADVANCED_PAUSE_MODE_LOAD_FILAMENT:
|
|
return PSTR("M701 T%d");
|
|
case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT:
|
|
return _change_filament_temp_extruder >= 0 ? PSTR("M702 T%d") : PSTR("M702 ;%d");
|
|
case ADVANCED_PAUSE_MODE_PAUSE_PRINT:
|
|
default:
|
|
return PSTR("M600 B0 T%d");
|
|
}
|
|
return PSTR(MSG_FILAMENTCHANGE);
|
|
}
|
|
|
|
void _change_filament_temp(const uint8_t index) {
|
|
char cmd[11];
|
|
sprintf_P(cmd, _change_filament_temp_command(), _change_filament_temp_extruder);
|
|
thermalManager.setTargetHotend(index == 1 ? PREHEAT_1_TEMP_HOTEND : PREHEAT_2_TEMP_HOTEND, _change_filament_temp_extruder);
|
|
lcd_enqueue_command(cmd);
|
|
}
|
|
void _lcd_change_filament_temp_1_menu() { _change_filament_temp(1); }
|
|
void _lcd_change_filament_temp_2_menu() { _change_filament_temp(2); }
|
|
|
|
static const char* change_filament_header(const AdvancedPauseMode mode) {
|
|
switch (mode) {
|
|
case ADVANCED_PAUSE_MODE_LOAD_FILAMENT:
|
|
return PSTR(MSG_FILAMENTLOAD);
|
|
case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT:
|
|
return PSTR(MSG_FILAMENTUNLOAD);
|
|
default: break;
|
|
}
|
|
return PSTR(MSG_FILAMENTCHANGE);
|
|
}
|
|
|
|
void _lcd_temp_menu_filament_op(const AdvancedPauseMode mode, const int8_t extruder) {
|
|
_change_filament_temp_mode = mode;
|
|
_change_filament_temp_extruder = extruder;
|
|
START_MENU();
|
|
if (LCD_HEIGHT >= 4) STATIC_ITEM_P(change_filament_header(mode), true, true);
|
|
MENU_BACK(MSG_FILAMENTCHANGE);
|
|
MENU_ITEM(submenu, MSG_PREHEAT_1, _lcd_change_filament_temp_1_menu);
|
|
MENU_ITEM(submenu, MSG_PREHEAT_2, _lcd_change_filament_temp_2_menu);
|
|
END_MENU();
|
|
}
|
|
void lcd_temp_menu_e0_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 0); }
|
|
void lcd_temp_menu_e0_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 0); }
|
|
void lcd_temp_menu_e0_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 0); }
|
|
#if E_STEPPERS > 1
|
|
void lcd_temp_menu_e1_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 1); }
|
|
void lcd_temp_menu_e1_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 1); }
|
|
void lcd_temp_menu_e1_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 1); }
|
|
#if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS)
|
|
void lcd_unload_filament_all_temp_menu() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, -1); }
|
|
#endif
|
|
#if E_STEPPERS > 2
|
|
void lcd_temp_menu_e2_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 2); }
|
|
void lcd_temp_menu_e2_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 2); }
|
|
void lcd_temp_menu_e2_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 2); }
|
|
#if E_STEPPERS > 3
|
|
void lcd_temp_menu_e3_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 3); }
|
|
void lcd_temp_menu_e3_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 3); }
|
|
void lcd_temp_menu_e3_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 3); }
|
|
#if E_STEPPERS > 4
|
|
void lcd_temp_menu_e4_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 4); }
|
|
void lcd_temp_menu_e4_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 4); }
|
|
void lcd_temp_menu_e4_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 4); }
|
|
#endif // E_STEPPERS > 4
|
|
#endif // E_STEPPERS > 3
|
|
#endif // E_STEPPERS > 2
|
|
#endif // E_STEPPERS > 1
|
|
|
|
/**
|
|
*
|
|
* "Change Filament" submenu
|
|
*
|
|
*/
|
|
#if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
|
void lcd_change_filament_menu() {
|
|
START_MENU();
|
|
MENU_BACK(MSG_PREPARE);
|
|
|
|
// Change filament
|
|
#if E_STEPPERS == 1
|
|
PGM_P msg0 = PSTR(MSG_FILAMENTCHANGE);
|
|
if (thermalManager.targetTooColdToExtrude(active_extruder))
|
|
MENU_ITEM_P(submenu, msg0, lcd_temp_menu_e0_filament_change);
|
|
else
|
|
MENU_ITEM_P(gcode, msg0, PSTR("M600 B0"));
|
|
#else
|
|
PGM_P msg0 = PSTR(MSG_FILAMENTCHANGE " " MSG_E1);
|
|
PGM_P msg1 = PSTR(MSG_FILAMENTCHANGE " " MSG_E2);
|
|
if (thermalManager.targetTooColdToExtrude(0))
|
|
MENU_ITEM_P(submenu, msg0, lcd_temp_menu_e0_filament_change);
|
|
else
|
|
MENU_ITEM_P(gcode, msg0, PSTR("M600 B0 T0"));
|
|
if (thermalManager.targetTooColdToExtrude(1))
|
|
MENU_ITEM_P(submenu, msg1, lcd_temp_menu_e1_filament_change);
|
|
else
|
|
MENU_ITEM_P(gcode, msg1, PSTR("M600 B0 T1"));
|
|
#if E_STEPPERS > 2
|
|
PGM_P msg2 = PSTR(MSG_FILAMENTCHANGE " " MSG_E3);
|
|
if (thermalManager.targetTooColdToExtrude(2))
|
|
MENU_ITEM_P(submenu, msg2, lcd_temp_menu_e2_filament_change);
|
|
else
|
|
MENU_ITEM_P(gcode, msg2, PSTR("M600 B0 T2"));
|
|
#if E_STEPPERS > 3
|
|
PGM_P msg3 = PSTR(MSG_FILAMENTCHANGE " " MSG_E4);
|
|
if (thermalManager.targetTooColdToExtrude(3))
|
|
MENU_ITEM_P(submenu, msg3, lcd_temp_menu_e3_filament_change);
|
|
else
|
|
MENU_ITEM_P(gcode, msg3, PSTR("M600 B0 T3"));
|
|
#if E_STEPPERS > 4
|
|
PGM_P msg4 = PSTR(MSG_FILAMENTCHANGE " " MSG_E5);
|
|
if (thermalManager.targetTooColdToExtrude(4))
|
|
MENU_ITEM_P(submenu, msg4, lcd_temp_menu_e4_filament_change);
|
|
else
|
|
MENU_ITEM_P(gcode, msg4, PSTR("M600 B0 T4"));
|
|
#endif // E_STEPPERS > 4
|
|
#endif // E_STEPPERS > 3
|
|
#endif // E_STEPPERS > 2
|
|
#endif // E_STEPPERS == 1
|
|
|
|
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
|
if (!planner.movesplanned() && !IS_SD_FILE_OPEN) {
|
|
// Load filament
|
|
#if E_STEPPERS == 1
|
|
PGM_P msg0 = PSTR(MSG_FILAMENTLOAD);
|
|
if (thermalManager.targetTooColdToExtrude(active_extruder))
|
|
MENU_ITEM_P(submenu, msg0, lcd_temp_menu_e0_filament_load);
|
|
else
|
|
MENU_ITEM_P(gcode, msg0, PSTR("M701"));
|
|
#else
|
|
PGM_P msg0 = PSTR(MSG_FILAMENTLOAD " " MSG_E1);
|
|
PGM_P msg1 = PSTR(MSG_FILAMENTLOAD " " MSG_E2);
|
|
if (thermalManager.targetTooColdToExtrude(0))
|
|
MENU_ITEM_P(submenu, msg0, lcd_temp_menu_e0_filament_load);
|
|
else
|
|
MENU_ITEM_P(gcode, msg0, PSTR("M701 T0"));
|
|
if (thermalManager.targetTooColdToExtrude(1))
|
|
MENU_ITEM_P(submenu, msg1, lcd_temp_menu_e1_filament_load);
|
|
else
|
|
MENU_ITEM_P(gcode, msg1, PSTR("M701 T1"));
|
|
#if E_STEPPERS > 2
|
|
PGM_P msg2 = PSTR(MSG_FILAMENTLOAD " " MSG_E3);
|
|
if (thermalManager.targetTooColdToExtrude(2))
|
|
MENU_ITEM_P(submenu, msg2, lcd_temp_menu_e2_filament_load);
|
|
else
|
|
MENU_ITEM_P(gcode, msg2, PSTR("M701 T2"));
|
|
#if E_STEPPERS > 3
|
|
PGM_P msg3 = PSTR(MSG_FILAMENTLOAD " " MSG_E4);
|
|
if (thermalManager.targetTooColdToExtrude(3))
|
|
MENU_ITEM_P(submenu, msg3, lcd_temp_menu_e3_filament_load);
|
|
else
|
|
MENU_ITEM_P(gcode, msg3, PSTR("M701 T3"));
|
|
#if E_STEPPERS > 4
|
|
PGM_P msg4 = PSTR(MSG_FILAMENTLOAD " " MSG_E5);
|
|
if (thermalManager.targetTooColdToExtrude(4))
|
|
MENU_ITEM_P(submenu, msg4, lcd_temp_menu_e4_filament_load);
|
|
else
|
|
MENU_ITEM_P(gcode, msg4, PSTR("M701 T4"));
|
|
#endif // E_STEPPERS > 4
|
|
#endif // E_STEPPERS > 3
|
|
#endif // E_STEPPERS > 2
|
|
#endif // E_STEPPERS == 1
|
|
|
|
// Unload filament
|
|
#if E_STEPPERS == 1
|
|
if (thermalManager.targetHotEnoughToExtrude(active_extruder))
|
|
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD, PSTR("M702"));
|
|
else
|
|
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD, lcd_temp_menu_e0_filament_unload);
|
|
#else
|
|
#if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS)
|
|
if (thermalManager.targetHotEnoughToExtrude(0)
|
|
#if E_STEPPERS > 1
|
|
&& thermalManager.targetHotEnoughToExtrude(1)
|
|
#if E_STEPPERS > 2
|
|
&& thermalManager.targetHotEnoughToExtrude(2)
|
|
#if E_STEPPERS > 3
|
|
&& thermalManager.targetHotEnoughToExtrude(3)
|
|
#if E_STEPPERS > 4
|
|
&& thermalManager.targetHotEnoughToExtrude(4)
|
|
#endif // E_STEPPERS > 4
|
|
#endif // E_STEPPERS > 3
|
|
#endif // E_STEPPERS > 2
|
|
#endif // E_STEPPERS > 1
|
|
)
|
|
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD_ALL, PSTR("M702"));
|
|
else
|
|
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD_ALL, lcd_unload_filament_all_temp_menu);
|
|
#endif
|
|
if (thermalManager.targetHotEnoughToExtrude(0))
|
|
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E1, PSTR("M702 T0"));
|
|
else
|
|
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E1, lcd_temp_menu_e0_filament_unload);
|
|
if (thermalManager.targetHotEnoughToExtrude(1))
|
|
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E2, PSTR("M702 T1"));
|
|
else
|
|
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E2, lcd_temp_menu_e1_filament_unload);
|
|
#if E_STEPPERS > 2
|
|
if (thermalManager.targetHotEnoughToExtrude(2))
|
|
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E3, PSTR("M702 T2"));
|
|
else
|
|
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E3, lcd_temp_menu_e2_filament_unload);
|
|
#if E_STEPPERS > 3
|
|
if (thermalManager.targetHotEnoughToExtrude(3))
|
|
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E4, PSTR("M702 T3"));
|
|
else
|
|
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E4, lcd_temp_menu_e3_filament_unload);
|
|
#if E_STEPPERS > 4
|
|
if (thermalManager.targetHotEnoughToExtrude(4))
|
|
MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E5, PSTR("M702 T4"));
|
|
else
|
|
MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E5, lcd_temp_menu_e4_filament_unload);
|
|
#endif // E_STEPPERS > 4
|
|
#endif // E_STEPPERS > 3
|
|
#endif // E_STEPPERS > 2
|
|
#endif // E_STEPPERS == 1
|
|
}
|
|
#endif
|
|
|
|
END_MENU();
|
|
}
|
|
#endif
|
|
|
|
static AdvancedPauseMode advanced_pause_mode = ADVANCED_PAUSE_MODE_PAUSE_PRINT;
|
|
static uint8_t hotend_status_extruder = 0;
|
|
|
|
static const char* advanced_pause_header() {
|
|
switch (advanced_pause_mode) {
|
|
case ADVANCED_PAUSE_MODE_LOAD_FILAMENT:
|
|
return PSTR(MSG_FILAMENT_CHANGE_HEADER_LOAD);
|
|
case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT:
|
|
return PSTR(MSG_FILAMENT_CHANGE_HEADER_UNLOAD);
|
|
default: break;
|
|
}
|
|
return PSTR(MSG_FILAMENT_CHANGE_HEADER_PAUSE);
|
|
}
|
|
|
|
// Portions from STATIC_ITEM...
|
|
#define HOTEND_STATUS_ITEM() do { \
|
|
if (_menuLineNr == _thisItemNr) { \
|
|
if (lcdDrawUpdate) { \
|
|
lcd_implementation_drawmenu_static(_lcdLineNr, PSTR(MSG_FILAMENT_CHANGE_NOZZLE), false, true); \
|
|
lcd_implementation_hotend_status(_lcdLineNr, hotend_status_extruder); \
|
|
} \
|
|
if (_skipStatic && encoderLine <= _thisItemNr) { \
|
|
encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
|
|
++encoderLine; \
|
|
} \
|
|
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; \
|
|
} \
|
|
++_thisItemNr; \
|
|
}while(0)
|
|
|
|
void lcd_advanced_pause_resume_print() {
|
|
advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_RESUME_PRINT;
|
|
}
|
|
|
|
void lcd_advanced_pause_extrude_more() {
|
|
advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE;
|
|
}
|
|
|
|
void lcd_advanced_pause_option_menu() {
|
|
START_MENU();
|
|
#if LCD_HEIGHT > 2
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_OPTION_HEADER, true, false);
|
|
#endif
|
|
MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_RESUME, lcd_advanced_pause_resume_print);
|
|
MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_PURGE, lcd_advanced_pause_extrude_more);
|
|
END_MENU();
|
|
}
|
|
|
|
void lcd_advanced_pause_init_message() {
|
|
START_SCREEN();
|
|
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_INIT_1);
|
|
#ifdef MSG_FILAMENT_CHANGE_INIT_2
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_INIT_2);
|
|
#define __FC_LINES_A 3
|
|
#else
|
|
#define __FC_LINES_A 2
|
|
#endif
|
|
#ifdef MSG_FILAMENT_CHANGE_INIT_3
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_INIT_3);
|
|
#define _FC_LINES_A (__FC_LINES_A + 1)
|
|
#else
|
|
#define _FC_LINES_A __FC_LINES_A
|
|
#endif
|
|
#if LCD_HEIGHT > _FC_LINES_A + 1
|
|
STATIC_ITEM(" ");
|
|
#endif
|
|
HOTEND_STATUS_ITEM();
|
|
END_SCREEN();
|
|
}
|
|
|
|
void lcd_advanced_pause_unload_message() {
|
|
START_SCREEN();
|
|
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_UNLOAD_1);
|
|
#ifdef MSG_FILAMENT_CHANGE_UNLOAD_2
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_UNLOAD_2);
|
|
#define __FC_LINES_B 3
|
|
#else
|
|
#define __FC_LINES_B 2
|
|
#endif
|
|
#ifdef MSG_FILAMENT_CHANGE_UNLOAD_3
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_UNLOAD_3);
|
|
#define _FC_LINES_B (__FC_LINES_B + 1)
|
|
#else
|
|
#define _FC_LINES_B __FC_LINES_B
|
|
#endif
|
|
#if LCD_HEIGHT > _FC_LINES_B + 1
|
|
STATIC_ITEM(" ");
|
|
#endif
|
|
HOTEND_STATUS_ITEM();
|
|
END_SCREEN();
|
|
}
|
|
|
|
void lcd_advanced_pause_wait_for_nozzles_to_heat() {
|
|
START_SCREEN();
|
|
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEATING_1);
|
|
#ifdef MSG_FILAMENT_CHANGE_HEATING_2
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEATING_2);
|
|
#define _FC_LINES_C 3
|
|
#else
|
|
#define _FC_LINES_C 2
|
|
#endif
|
|
#if LCD_HEIGHT > _FC_LINES_C + 1
|
|
STATIC_ITEM(" ");
|
|
#endif
|
|
HOTEND_STATUS_ITEM();
|
|
END_SCREEN();
|
|
}
|
|
|
|
void lcd_advanced_pause_heat_nozzle() {
|
|
START_SCREEN();
|
|
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEAT_1);
|
|
#ifdef MSG_FILAMENT_CHANGE_INSERT_2
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEAT_2);
|
|
#define _FC_LINES_D 3
|
|
#else
|
|
#define _FC_LINES_D 2
|
|
#endif
|
|
#if LCD_HEIGHT > _FC_LINES_D + 1
|
|
STATIC_ITEM(" ");
|
|
#endif
|
|
HOTEND_STATUS_ITEM();
|
|
END_SCREEN();
|
|
}
|
|
|
|
void lcd_advanced_pause_insert_message() {
|
|
START_SCREEN();
|
|
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_INSERT_1);
|
|
#ifdef MSG_FILAMENT_CHANGE_INSERT_2
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_INSERT_2);
|
|
#define __FC_LINES_E 3
|
|
#else
|
|
#define __FC_LINES_E 2
|
|
#endif
|
|
#ifdef MSG_FILAMENT_CHANGE_INSERT_3
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_INSERT_3);
|
|
#define _FC_LINES_E (__FC_LINES_E + 1)
|
|
#else
|
|
#define _FC_LINES_E __FC_LINES_E
|
|
#endif
|
|
#if LCD_HEIGHT > _FC_LINES_E + 1
|
|
STATIC_ITEM(" ");
|
|
#endif
|
|
HOTEND_STATUS_ITEM();
|
|
END_SCREEN();
|
|
}
|
|
|
|
void lcd_advanced_pause_load_message() {
|
|
START_SCREEN();
|
|
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_LOAD_1);
|
|
#ifdef MSG_FILAMENT_CHANGE_LOAD_2
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_LOAD_2);
|
|
#define __FC_LINES_F 3
|
|
#else
|
|
#define __FC_LINES_F 2
|
|
#endif
|
|
#ifdef MSG_FILAMENT_CHANGE_LOAD_3
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_LOAD_3);
|
|
#define _FC_LINES_F (__FC_LINES_F + 1)
|
|
#else
|
|
#define _FC_LINES_F __FC_LINES_F
|
|
#endif
|
|
#if LCD_HEIGHT > _FC_LINES_F + 1
|
|
STATIC_ITEM(" ");
|
|
#endif
|
|
HOTEND_STATUS_ITEM();
|
|
END_SCREEN();
|
|
}
|
|
|
|
void lcd_advanced_pause_purge_message() {
|
|
START_SCREEN();
|
|
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_1);
|
|
#ifdef MSG_FILAMENT_CHANGE_PURGE_2
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_2);
|
|
#define __FC_LINES_G 3
|
|
#else
|
|
#define __FC_LINES_G 2
|
|
#endif
|
|
#ifdef MSG_FILAMENT_CHANGE_PURGE_3
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_3);
|
|
#define _FC_LINES_G (__FC_LINES_G + 1)
|
|
#else
|
|
#define _FC_LINES_G __FC_LINES_G
|
|
#endif
|
|
#if LCD_HEIGHT > _FC_LINES_G + 1
|
|
STATIC_ITEM(" ");
|
|
#endif
|
|
HOTEND_STATUS_ITEM();
|
|
END_SCREEN();
|
|
}
|
|
|
|
#if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
|
|
void lcd_advanced_pause_continuous_purge_menu() {
|
|
START_SCREEN();
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_1);
|
|
#ifdef MSG_FILAMENT_CHANGE_PURGE_2
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_2);
|
|
#define __FC_LINES_G 3
|
|
#else
|
|
#define __FC_LINES_G 2
|
|
#endif
|
|
#ifdef MSG_FILAMENT_CHANGE_PURGE_3
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_3);
|
|
#define _FC_LINES_G (__FC_LINES_G + 1)
|
|
#else
|
|
#define _FC_LINES_G __FC_LINES_G
|
|
#endif
|
|
#if LCD_HEIGHT > _FC_LINES_G + 1
|
|
STATIC_ITEM(" ");
|
|
#endif
|
|
HOTEND_STATUS_ITEM();
|
|
STATIC_ITEM(MSG_USERWAIT);
|
|
END_SCREEN();
|
|
}
|
|
#endif
|
|
|
|
void lcd_advanced_pause_resume_message() {
|
|
START_SCREEN();
|
|
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_RESUME_1);
|
|
#ifdef MSG_FILAMENT_CHANGE_RESUME_2
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_RESUME_2);
|
|
#endif
|
|
#ifdef MSG_FILAMENT_CHANGE_RESUME_3
|
|
STATIC_ITEM(MSG_FILAMENT_CHANGE_RESUME_3);
|
|
#endif
|
|
END_SCREEN();
|
|
}
|
|
|
|
FORCE_INLINE screenFunc_t ap_message_screen(const AdvancedPauseMessage message) {
|
|
switch (message) {
|
|
case ADVANCED_PAUSE_MESSAGE_INIT: return lcd_advanced_pause_init_message;
|
|
case ADVANCED_PAUSE_MESSAGE_UNLOAD: return lcd_advanced_pause_unload_message;
|
|
case ADVANCED_PAUSE_MESSAGE_INSERT: return lcd_advanced_pause_insert_message;
|
|
case ADVANCED_PAUSE_MESSAGE_LOAD: return lcd_advanced_pause_load_message;
|
|
case ADVANCED_PAUSE_MESSAGE_PURGE: return lcd_advanced_pause_purge_message;
|
|
case ADVANCED_PAUSE_MESSAGE_RESUME: return lcd_advanced_pause_resume_message;
|
|
case ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE: return lcd_advanced_pause_heat_nozzle;
|
|
case ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT: return lcd_advanced_pause_wait_for_nozzles_to_heat;
|
|
case ADVANCED_PAUSE_MESSAGE_OPTION: advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_WAIT_FOR;
|
|
return lcd_advanced_pause_option_menu;
|
|
#if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
|
|
case ADVANCED_PAUSE_MESSAGE_CONTINUOUS_PURGE: return lcd_advanced_pause_continuous_purge_menu;
|
|
#endif
|
|
case ADVANCED_PAUSE_MESSAGE_STATUS:
|
|
default: break;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
void lcd_advanced_pause_show_message(
|
|
const AdvancedPauseMessage message,
|
|
const AdvancedPauseMode mode/*=ADVANCED_PAUSE_MODE_PAUSE_PRINT*/,
|
|
const uint8_t extruder/*=active_extruder*/
|
|
) {
|
|
advanced_pause_mode = mode;
|
|
hotend_status_extruder = extruder;
|
|
const screenFunc_t next_screen = ap_message_screen(message);
|
|
if (next_screen) {
|
|
defer_return_to_status = true;
|
|
lcd_goto_screen(next_screen);
|
|
}
|
|
else
|
|
lcd_return_to_status();
|
|
}
|
|
|
|
#endif // ADVANCED_PAUSE_FEATURE
|
|
|
|
/**
|
|
*
|
|
* Functions for editing single values
|
|
*
|
|
* The "DEFINE_MENU_EDIT_TYPE" macro generates the functions needed to edit a numerical value.
|
|
*
|
|
* For example, DEFINE_MENU_EDIT_TYPE(int16_t, int3, itostr3, 1) expands into these functions:
|
|
*
|
|
* bool _menu_edit_int3();
|
|
* void menu_edit_int3(); // edit int16_t (interactively)
|
|
* void menu_edit_callback_int3(); // edit int16_t (interactively) with callback on completion
|
|
* void _menu_action_setting_edit_int3(const char * const pstr, int16_t * const ptr, const int16_t minValue, const int16_t maxValue);
|
|
* void menu_action_setting_edit_int3(const char * const pstr, int16_t * const ptr, const int16_t minValue, const int16_t maxValue);
|
|
* void menu_action_setting_edit_callback_int3(const char * const pstr, int16_t * const ptr, const int16_t minValue, const int16_t maxValue, const screenFunc_t callback, const bool live); // edit int16_t with callback
|
|
*
|
|
* You can then use one of the menu macros to present the edit interface:
|
|
* MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999)
|
|
*
|
|
* This expands into a more primitive menu item:
|
|
* MENU_ITEM(setting_edit_int3, MSG_SPEED, PSTR(MSG_SPEED), &feedrate_percentage, 10, 999)
|
|
*
|
|
* ...which calls:
|
|
* menu_action_setting_edit_int3(PSTR(MSG_SPEED), &feedrate_percentage, 10, 999)
|
|
*/
|
|
#define DEFINE_MENU_EDIT_TYPE(_type, _name, _strFunc, _scale) \
|
|
bool _menu_edit_ ## _name() { \
|
|
ENCODER_DIRECTION_NORMAL(); \
|
|
if ((int32_t)encoderPosition < 0) encoderPosition = 0; \
|
|
if ((int32_t)encoderPosition > maxEditValue) encoderPosition = maxEditValue; \
|
|
if (lcdDrawUpdate) \
|
|
lcd_implementation_drawedit(editLabel, _strFunc(((_type)((int32_t)encoderPosition + minEditValue)) * (1.0 / _scale))); \
|
|
if (lcd_clicked || (liveEdit && lcdDrawUpdate)) { \
|
|
_type value = ((_type)((int32_t)encoderPosition + minEditValue)) * (1.0 / _scale); \
|
|
if (editValue != NULL) *((_type*)editValue) = value; \
|
|
if (liveEdit) (*callbackFunc)(); \
|
|
if (lcd_clicked) lcd_goto_previous_menu(); \
|
|
} \
|
|
return use_click(); \
|
|
} \
|
|
void menu_edit_ ## _name() { _menu_edit_ ## _name(); } \
|
|
void menu_edit_callback_ ## _name() { if (_menu_edit_ ## _name()) (*callbackFunc)(); } \
|
|
void _menu_action_setting_edit_ ## _name(const char * const pstr, _type* const ptr, const _type minValue, const _type maxValue) { \
|
|
lcd_save_previous_screen(); \
|
|
lcd_refresh(); \
|
|
\
|
|
editLabel = pstr; \
|
|
editValue = ptr; \
|
|
minEditValue = minValue * _scale; \
|
|
maxEditValue = maxValue * _scale - minEditValue; \
|
|
encoderPosition = (*ptr) * _scale - minEditValue; \
|
|
} \
|
|
void menu_action_setting_edit_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue) { \
|
|
_menu_action_setting_edit_ ## _name(pstr, ptr, minValue, maxValue); \
|
|
currentScreen = menu_edit_ ## _name; \
|
|
} \
|
|
void menu_action_setting_edit_callback_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback, const bool live) { \
|
|
_menu_action_setting_edit_ ## _name(pstr, ptr, minValue, maxValue); \
|
|
currentScreen = menu_edit_callback_ ## _name; \
|
|
callbackFunc = callback; \
|
|
liveEdit = live; \
|
|
} \
|
|
typedef void _name
|
|
|
|
DEFINE_MENU_EDIT_TYPE(int16_t, int3, itostr3, 1);
|
|
DEFINE_MENU_EDIT_TYPE(uint8_t, int8, i8tostr3, 1);
|
|
DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1.0);
|
|
DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52, 100.0);
|
|
DEFINE_MENU_EDIT_TYPE(float, float43, ftostr43sign, 1000.0);
|
|
DEFINE_MENU_EDIT_TYPE(float, float5, ftostr5rj, 0.01);
|
|
DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10.0);
|
|
DEFINE_MENU_EDIT_TYPE(float, float52sign, ftostr52sign, 100.0);
|
|
DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100.0);
|
|
DEFINE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01);
|
|
|
|
/**
|
|
*
|
|
* Handlers for Keypad input
|
|
*
|
|
*/
|
|
#if ENABLED(ADC_KEYPAD)
|
|
|
|
inline bool handle_adc_keypad() {
|
|
#define ADC_MIN_KEY_DELAY 100
|
|
if (buttons_reprapworld_keypad) {
|
|
lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
|
|
if (encoderDirection == -1) { // side effect which signals we are inside a menu
|
|
if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_DOWN) encoderPosition -= ENCODER_STEPS_PER_MENU_ITEM;
|
|
else if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_UP) encoderPosition += ENCODER_STEPS_PER_MENU_ITEM;
|
|
else if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_LEFT) { menu_action_back(); lcd_quick_feedback(true); }
|
|
else if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_RIGHT) { lcd_return_to_status(); lcd_quick_feedback(true); }
|
|
}
|
|
else {
|
|
if (buttons_reprapworld_keypad & (EN_REPRAPWORLD_KEYPAD_DOWN|EN_REPRAPWORLD_KEYPAD_UP|EN_REPRAPWORLD_KEYPAD_RIGHT)) {
|
|
if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_DOWN) encoderPosition += ENCODER_PULSES_PER_STEP;
|
|
else if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_UP) encoderPosition -= ENCODER_PULSES_PER_STEP;
|
|
else if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_RIGHT) encoderPosition = 0;
|
|
}
|
|
}
|
|
#if ENABLED(ADC_KEYPAD_DEBUG)
|
|
SERIAL_PROTOCOLLNPAIR("buttons_reprapworld_keypad = ", (uint32_t)buttons_reprapworld_keypad);
|
|
SERIAL_PROTOCOLLNPAIR("encoderPosition = ", (uint32_t)encoderPosition);
|
|
#endif
|
|
next_button_update_ms = millis() + ADC_MIN_KEY_DELAY;
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
#elif ENABLED(REPRAPWORLD_KEYPAD)
|
|
|
|
void _reprapworld_keypad_move(const AxisEnum axis, const int16_t dir) {
|
|
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
|
|
encoderPosition = dir;
|
|
switch (axis) {
|
|
case X_AXIS: lcd_move_x(); break;
|
|
case Y_AXIS: lcd_move_y(); break;
|
|
case Z_AXIS: lcd_move_z();
|
|
default: break;
|
|
}
|
|
}
|
|
void reprapworld_keypad_move_z_up() { _reprapworld_keypad_move(Z_AXIS, 1); }
|
|
void reprapworld_keypad_move_z_down() { _reprapworld_keypad_move(Z_AXIS, -1); }
|
|
void reprapworld_keypad_move_x_left() { _reprapworld_keypad_move(X_AXIS, -1); }
|
|
void reprapworld_keypad_move_x_right() { _reprapworld_keypad_move(X_AXIS, 1); }
|
|
void reprapworld_keypad_move_y_up() { _reprapworld_keypad_move(Y_AXIS, -1); }
|
|
void reprapworld_keypad_move_y_down() { _reprapworld_keypad_move(Y_AXIS, 1); }
|
|
void reprapworld_keypad_move_home() { enqueue_and_echo_commands_P(PSTR("G28")); } // move all axes home and wait
|
|
void reprapworld_keypad_move_menu() { lcd_goto_screen(lcd_move_menu); }
|
|
|
|
inline void handle_reprapworld_keypad() {
|
|
|
|
static uint8_t keypad_debounce = 0;
|
|
|
|
if (!REPRAPWORLD_KEYPAD_PRESSED) {
|
|
if (keypad_debounce > 0) keypad_debounce--;
|
|
}
|
|
else if (!keypad_debounce) {
|
|
keypad_debounce = 2;
|
|
|
|
if (REPRAPWORLD_KEYPAD_MOVE_MENU) reprapworld_keypad_move_menu();
|
|
|
|
#if DISABLED(DELTA) && Z_HOME_DIR == -1
|
|
if (REPRAPWORLD_KEYPAD_MOVE_Z_UP) reprapworld_keypad_move_z_up();
|
|
#endif
|
|
|
|
if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS]) {
|
|
#if ENABLED(DELTA) || Z_HOME_DIR != -1
|
|
if (REPRAPWORLD_KEYPAD_MOVE_Z_UP) reprapworld_keypad_move_z_up();
|
|
#endif
|
|
if (REPRAPWORLD_KEYPAD_MOVE_Z_DOWN) reprapworld_keypad_move_z_down();
|
|
if (REPRAPWORLD_KEYPAD_MOVE_X_LEFT) reprapworld_keypad_move_x_left();
|
|
if (REPRAPWORLD_KEYPAD_MOVE_X_RIGHT) reprapworld_keypad_move_x_right();
|
|
if (REPRAPWORLD_KEYPAD_MOVE_Y_DOWN) reprapworld_keypad_move_y_down();
|
|
if (REPRAPWORLD_KEYPAD_MOVE_Y_UP) reprapworld_keypad_move_y_up();
|
|
}
|
|
else {
|
|
if (REPRAPWORLD_KEYPAD_MOVE_HOME) reprapworld_keypad_move_home();
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif // REPRAPWORLD_KEYPAD
|
|
|
|
/**
|
|
*
|
|
* Menu actions
|
|
*
|
|
*/
|
|
void _menu_action_back() { lcd_goto_previous_menu(); }
|
|
void menu_action_submenu(screenFunc_t func) { lcd_save_previous_screen(); lcd_goto_screen(func); }
|
|
void menu_action_gcode(const char* pgcode) { enqueue_and_echo_commands_P(pgcode); }
|
|
void menu_action_function(screenFunc_t func) { (*func)(); }
|
|
|
|
#if ENABLED(SDSUPPORT)
|
|
|
|
void menu_action_sdfile(const char* filename, char* longFilename) {
|
|
#if ENABLED(SD_REPRINT_LAST_SELECTED_FILE)
|
|
last_sdfile_encoderPosition = encoderPosition; // Save which file was selected for later use
|
|
#endif
|
|
UNUSED(longFilename);
|
|
card.openAndPrintFile(filename);
|
|
lcd_return_to_status();
|
|
lcd_reset_status();
|
|
}
|
|
|
|
void menu_action_sddirectory(const char* filename, char* longFilename) {
|
|
UNUSED(longFilename);
|
|
card.chdir(filename);
|
|
encoderTopLine = 0;
|
|
encoderPosition = 2 * ENCODER_STEPS_PER_MENU_ITEM;
|
|
screen_changed = true;
|
|
#if ENABLED(DOGLCD)
|
|
drawing_screen = false;
|
|
#endif
|
|
lcd_refresh();
|
|
}
|
|
|
|
#endif // SDSUPPORT
|
|
|
|
void menu_action_setting_edit_bool(const char* pstr, bool* ptr) { UNUSED(pstr); *ptr ^= true; lcd_refresh(); }
|
|
void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callback) {
|
|
menu_action_setting_edit_bool(pstr, ptr);
|
|
(*callback)();
|
|
}
|
|
|
|
#endif // ULTIPANEL
|
|
|
|
void lcd_init() {
|
|
|
|
lcd_implementation_init();
|
|
|
|
#if ENABLED(NEWPANEL)
|
|
#if BUTTON_EXISTS(EN1)
|
|
SET_INPUT_PULLUP(BTN_EN1);
|
|
#endif
|
|
#if BUTTON_EXISTS(EN2)
|
|
SET_INPUT_PULLUP(BTN_EN2);
|
|
#endif
|
|
#if BUTTON_EXISTS(ENC)
|
|
SET_INPUT_PULLUP(BTN_ENC);
|
|
#endif
|
|
|
|
#if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(ADC_KEYPAD)
|
|
SET_OUTPUT(SHIFT_CLK);
|
|
OUT_WRITE(SHIFT_LD, HIGH);
|
|
SET_INPUT_PULLUP(SHIFT_OUT);
|
|
#endif
|
|
|
|
#if BUTTON_EXISTS(UP)
|
|
SET_INPUT(BTN_UP);
|
|
#endif
|
|
#if BUTTON_EXISTS(DWN)
|
|
SET_INPUT(BTN_DWN);
|
|
#endif
|
|
#if BUTTON_EXISTS(LFT)
|
|
SET_INPUT(BTN_LFT);
|
|
#endif
|
|
#if BUTTON_EXISTS(RT)
|
|
SET_INPUT(BTN_RT);
|
|
#endif
|
|
|
|
#else // !NEWPANEL
|
|
|
|
#if ENABLED(SR_LCD_2W_NL) // Non latching 2 wire shift register
|
|
SET_OUTPUT(SR_DATA_PIN);
|
|
SET_OUTPUT(SR_CLK_PIN);
|
|
#elif defined(SHIFT_CLK)
|
|
SET_OUTPUT(SHIFT_CLK);
|
|
OUT_WRITE(SHIFT_LD, HIGH);
|
|
OUT_WRITE(SHIFT_EN, LOW);
|
|
SET_INPUT_PULLUP(SHIFT_OUT);
|
|
#endif // SR_LCD_2W_NL
|
|
|
|
#endif // !NEWPANEL
|
|
|
|
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
|
|
SET_INPUT_PULLUP(SD_DETECT_PIN);
|
|
lcd_sd_status = 2; // UNKNOWN
|
|
#endif
|
|
|
|
#if ENABLED(LCD_HAS_SLOW_BUTTONS)
|
|
slow_buttons = 0;
|
|
#endif
|
|
|
|
lcd_buttons_update();
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
encoderDiff = 0;
|
|
#endif
|
|
}
|
|
|
|
int16_t lcd_strlen(const char* s) {
|
|
int16_t i = 0, j = 0;
|
|
while (s[i]) {
|
|
if (PRINTABLE(s[i])) j++;
|
|
i++;
|
|
}
|
|
return j;
|
|
}
|
|
|
|
int16_t lcd_strlen_P(const char* s) {
|
|
int16_t j = 0;
|
|
while (pgm_read_byte(s)) {
|
|
if (PRINTABLE(pgm_read_byte(s))) j++;
|
|
s++;
|
|
}
|
|
return j;
|
|
}
|
|
|
|
bool lcd_blink() {
|
|
static uint8_t blink = 0;
|
|
static millis_t next_blink_ms = 0;
|
|
millis_t ms = millis();
|
|
if (ELAPSED(ms, next_blink_ms)) {
|
|
blink ^= 0xFF;
|
|
next_blink_ms = ms + 1000 - (LCD_UPDATE_INTERVAL) / 2;
|
|
}
|
|
return blink != 0;
|
|
}
|
|
|
|
/**
|
|
* Update the LCD, read encoder buttons, etc.
|
|
* - Read button states
|
|
* - Check the SD Card slot state
|
|
* - Act on RepRap World keypad input
|
|
* - Update the encoder position
|
|
* - Apply acceleration to the encoder position
|
|
* - Set lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NOW on controller events
|
|
* - Reset the Info Screen timeout if there's any input
|
|
* - Update status indicators, if any
|
|
*
|
|
* Run the current LCD menu handler callback function:
|
|
* - Call the handler only if lcdDrawUpdate != LCDVIEW_NONE
|
|
* - Before calling the handler, LCDVIEW_CALL_NO_REDRAW => LCDVIEW_NONE
|
|
* - Call the menu handler. Menu handlers should do the following:
|
|
* - If a value changes, set lcdDrawUpdate to LCDVIEW_REDRAW_NOW and draw the value
|
|
* (Encoder events automatically set lcdDrawUpdate for you.)
|
|
* - if (lcdDrawUpdate) { redraw }
|
|
* - Before exiting the handler set lcdDrawUpdate to:
|
|
* - LCDVIEW_CLEAR_CALL_REDRAW to clear screen and set LCDVIEW_CALL_REDRAW_NEXT.
|
|
* - LCDVIEW_REDRAW_NOW to draw now (including remaining stripes).
|
|
* - LCDVIEW_CALL_REDRAW_NEXT to draw now and get LCDVIEW_REDRAW_NOW on the next loop.
|
|
* - LCDVIEW_CALL_NO_REDRAW to draw now and get LCDVIEW_NONE on the next loop.
|
|
* - NOTE: For graphical displays menu handlers may be called 2 or more times per loop,
|
|
* so don't change lcdDrawUpdate without considering this.
|
|
*
|
|
* After the menu handler callback runs (or not):
|
|
* - Clear the LCD if lcdDrawUpdate == LCDVIEW_CLEAR_CALL_REDRAW
|
|
* - Update lcdDrawUpdate for the next loop (i.e., move one state down, usually)
|
|
*
|
|
* No worries. This function is only called from the main thread.
|
|
*/
|
|
void lcd_update() {
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
static millis_t return_to_status_ms = 0;
|
|
|
|
// Handle any queued Move Axis motion
|
|
manage_manual_move();
|
|
|
|
// Update button states for LCD_CLICKED, etc.
|
|
// After state changes the next button update
|
|
// may be delayed 300-500ms.
|
|
lcd_buttons_update();
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
|
// Don't run the debouncer if UBL owns the display
|
|
#define UBL_CONDITION !lcd_external_control
|
|
#else
|
|
#define UBL_CONDITION true
|
|
#endif
|
|
|
|
// If the action button is pressed...
|
|
if (UBL_CONDITION && LCD_CLICKED) {
|
|
if (!wait_for_unclick) { // If not waiting for a debounce release:
|
|
wait_for_unclick = true; // Set debounce flag to ignore continous clicks
|
|
lcd_clicked = !wait_for_user && !no_reentry; // Keep the click if not waiting for a user-click
|
|
wait_for_user = false; // Any click clears wait for user
|
|
lcd_quick_feedback(true); // Always make a click sound
|
|
}
|
|
}
|
|
else wait_for_unclick = false;
|
|
|
|
#if BUTTON_EXISTS(BACK)
|
|
if (LCD_BACK_CLICKED) {
|
|
lcd_quick_feedback(true);
|
|
lcd_goto_previous_menu();
|
|
}
|
|
#endif
|
|
|
|
#endif // ULTIPANEL
|
|
|
|
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
|
|
|
|
const uint8_t sd_status = (uint8_t)IS_SD_INSERTED;
|
|
if (sd_status != lcd_sd_status && lcd_detected()) {
|
|
|
|
uint8_t old_sd_status = lcd_sd_status; // prevent re-entry to this block!
|
|
lcd_sd_status = sd_status;
|
|
|
|
if (sd_status) {
|
|
safe_delay(500); // Some boards need a delay to get settled
|
|
card.initsd();
|
|
if (old_sd_status == 2)
|
|
card.beginautostart(); // Initial boot
|
|
else
|
|
LCD_MESSAGEPGM(MSG_SD_INSERTED);
|
|
}
|
|
else {
|
|
card.release();
|
|
if (old_sd_status != 2) LCD_MESSAGEPGM(MSG_SD_REMOVED);
|
|
}
|
|
|
|
lcd_refresh();
|
|
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
|
|
#if ENABLED(LCD_PROGRESS_BAR)
|
|
currentScreen == lcd_status_screen ? CHARSET_INFO : CHARSET_MENU
|
|
#endif
|
|
);
|
|
}
|
|
|
|
#endif // SDSUPPORT && SD_DETECT_PIN
|
|
|
|
#if ENABLED(POWER_LOSS_RECOVERY)
|
|
if (job_recovery_commands_count && job_recovery_phase == JOB_RECOVERY_IDLE) {
|
|
lcd_goto_screen(lcd_job_recovery_menu);
|
|
job_recovery_phase = JOB_RECOVERY_MAYBE; // Waiting for a response
|
|
}
|
|
#endif
|
|
|
|
const millis_t ms = millis();
|
|
if (ELAPSED(ms, next_lcd_update_ms)
|
|
#if ENABLED(DOGLCD)
|
|
|| drawing_screen
|
|
#endif
|
|
) {
|
|
|
|
next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL;
|
|
|
|
#if ENABLED(LCD_HAS_STATUS_INDICATORS)
|
|
lcd_implementation_update_indicators();
|
|
#endif
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
|
|
#if ENABLED(LCD_HAS_SLOW_BUTTONS)
|
|
slow_buttons = lcd_implementation_read_slow_buttons(); // buttons which take too long to read in interrupt context
|
|
#endif
|
|
|
|
#if ENABLED(ADC_KEYPAD)
|
|
|
|
if (handle_adc_keypad())
|
|
return_to_status_ms = ms + LCD_TIMEOUT_TO_STATUS;
|
|
|
|
#elif ENABLED(REPRAPWORLD_KEYPAD)
|
|
|
|
handle_reprapworld_keypad();
|
|
|
|
#endif
|
|
|
|
const bool encoderPastThreshold = (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP);
|
|
if (encoderPastThreshold || lcd_clicked) {
|
|
if (encoderPastThreshold) {
|
|
int32_t encoderMultiplier = 1;
|
|
|
|
#if ENABLED(ENCODER_RATE_MULTIPLIER)
|
|
|
|
if (encoderRateMultiplierEnabled) {
|
|
int32_t encoderMovementSteps = abs(encoderDiff) / ENCODER_PULSES_PER_STEP;
|
|
|
|
if (lastEncoderMovementMillis) {
|
|
// Note that the rate is always calculated between two passes through the
|
|
// loop and that the abs of the encoderDiff value is tracked.
|
|
float encoderStepRate = float(encoderMovementSteps) / float(ms - lastEncoderMovementMillis) * 1000.0;
|
|
|
|
if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC) encoderMultiplier = 100;
|
|
else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC) encoderMultiplier = 10;
|
|
|
|
#if ENABLED(ENCODER_RATE_MULTIPLIER_DEBUG)
|
|
SERIAL_ECHO_START();
|
|
SERIAL_ECHOPAIR("Enc Step Rate: ", encoderStepRate);
|
|
SERIAL_ECHOPAIR(" Multiplier: ", encoderMultiplier);
|
|
SERIAL_ECHOPAIR(" ENCODER_10X_STEPS_PER_SEC: ", ENCODER_10X_STEPS_PER_SEC);
|
|
SERIAL_ECHOPAIR(" ENCODER_100X_STEPS_PER_SEC: ", ENCODER_100X_STEPS_PER_SEC);
|
|
SERIAL_EOL();
|
|
#endif // ENCODER_RATE_MULTIPLIER_DEBUG
|
|
}
|
|
|
|
lastEncoderMovementMillis = ms;
|
|
} // encoderRateMultiplierEnabled
|
|
#endif // ENCODER_RATE_MULTIPLIER
|
|
|
|
encoderPosition += (encoderDiff * encoderMultiplier) / ENCODER_PULSES_PER_STEP;
|
|
encoderDiff = 0;
|
|
}
|
|
return_to_status_ms = ms + LCD_TIMEOUT_TO_STATUS;
|
|
lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
|
|
}
|
|
#endif // ULTIPANEL
|
|
|
|
// We arrive here every ~100ms when idling often enough.
|
|
// Instead of tracking the changes simply redraw the Info Screen ~1 time a second.
|
|
if (
|
|
#if ENABLED(ULTIPANEL)
|
|
currentScreen == lcd_status_screen &&
|
|
#endif
|
|
!lcd_status_update_delay--
|
|
) {
|
|
lcd_status_update_delay = 9
|
|
#if ENABLED(DOGLCD)
|
|
+ 3
|
|
#endif
|
|
;
|
|
max_display_update_time--;
|
|
lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
|
|
}
|
|
|
|
#if ENABLED(ULTIPANEL) && ENABLED(SCROLL_LONG_FILENAMES)
|
|
// If scrolling of long file names is enabled and we are in the sd card menu,
|
|
// cause a refresh to occur until all the text has scrolled into view.
|
|
if (currentScreen == lcd_sdcard_menu && filename_scroll_pos < filename_scroll_max && !lcd_status_update_delay--) {
|
|
lcd_status_update_delay = 6;
|
|
lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
|
|
filename_scroll_pos++;
|
|
return_to_status_ms = ms + LCD_TIMEOUT_TO_STATUS;
|
|
}
|
|
#endif
|
|
|
|
// then we want to use 1/2 of the time only.
|
|
uint16_t bbr2 = planner.block_buffer_runtime() >> 1;
|
|
|
|
#if ENABLED(DOGLCD)
|
|
#define IS_DRAWING drawing_screen
|
|
#else
|
|
#define IS_DRAWING false
|
|
#endif
|
|
|
|
if ((lcdDrawUpdate || IS_DRAWING) && (!bbr2 || bbr2 > max_display_update_time)) {
|
|
|
|
// Change state of drawing flag between screen updates
|
|
if (!IS_DRAWING) switch (lcdDrawUpdate) {
|
|
case LCDVIEW_CALL_NO_REDRAW:
|
|
lcdDrawUpdate = LCDVIEW_NONE;
|
|
break;
|
|
case LCDVIEW_CLEAR_CALL_REDRAW:
|
|
case LCDVIEW_CALL_REDRAW_NEXT:
|
|
lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
|
|
case LCDVIEW_REDRAW_NOW: // set above, or by a handler through LCDVIEW_CALL_REDRAW_NEXT
|
|
case LCDVIEW_NONE:
|
|
break;
|
|
} // switch
|
|
|
|
#if ENABLED(ADC_KEYPAD)
|
|
buttons_reprapworld_keypad = 0;
|
|
#endif
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
#define CURRENTSCREEN() (*currentScreen)()
|
|
#else
|
|
#define CURRENTSCREEN() lcd_status_screen()
|
|
#endif
|
|
|
|
#if ENABLED(DOGLCD)
|
|
#if ENABLED(LIGHTWEIGHT_UI)
|
|
#if ENABLED(ULTIPANEL)
|
|
const bool in_status = currentScreen == lcd_status_screen;
|
|
#else
|
|
constexpr bool in_status = true;
|
|
#endif
|
|
const bool do_u8g_loop = !in_status;
|
|
lcd_in_status(in_status);
|
|
if (in_status) lcd_status_screen();
|
|
#else
|
|
constexpr bool do_u8g_loop = true;
|
|
#endif
|
|
if (do_u8g_loop) {
|
|
if (!drawing_screen) { // If not already drawing pages
|
|
u8g.firstPage(); // Start the first page
|
|
drawing_screen = first_page = true; // Flag as drawing pages
|
|
}
|
|
lcd_setFont(FONT_MENU); // Setup font for every page draw
|
|
u8g.setColorIndex(1); // And reset the color
|
|
CURRENTSCREEN(); // Draw and process the current screen
|
|
first_page = false;
|
|
|
|
// The screen handler can clear drawing_screen for an action that changes the screen.
|
|
// If still drawing and there's another page, update max-time and return now.
|
|
// The nextPage will already be set up on the next call.
|
|
if (drawing_screen && (drawing_screen = u8g.nextPage())) {
|
|
NOLESS(max_display_update_time, millis() - ms);
|
|
return;
|
|
}
|
|
}
|
|
#else
|
|
CURRENTSCREEN();
|
|
#endif
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
lcd_clicked = false;
|
|
#endif
|
|
|
|
// Keeping track of the longest time for an individual LCD update.
|
|
// Used to do screen throttling when the planner starts to fill up.
|
|
NOLESS(max_display_update_time, millis() - ms);
|
|
}
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
|
|
// Return to Status Screen after a timeout
|
|
if (currentScreen == lcd_status_screen || defer_return_to_status)
|
|
return_to_status_ms = ms + LCD_TIMEOUT_TO_STATUS;
|
|
else if (ELAPSED(ms, return_to_status_ms))
|
|
lcd_return_to_status();
|
|
|
|
#endif // ULTIPANEL
|
|
|
|
// Change state of drawing flag between screen updates
|
|
if (!IS_DRAWING) switch (lcdDrawUpdate) {
|
|
case LCDVIEW_CLEAR_CALL_REDRAW:
|
|
lcd_implementation_clear(); break;
|
|
case LCDVIEW_REDRAW_NOW:
|
|
lcdDrawUpdate = LCDVIEW_NONE;
|
|
case LCDVIEW_NONE:
|
|
case LCDVIEW_CALL_REDRAW_NEXT:
|
|
case LCDVIEW_CALL_NO_REDRAW:
|
|
default: break;
|
|
} // switch
|
|
|
|
} // ELAPSED(ms, next_lcd_update_ms)
|
|
}
|
|
|
|
inline void pad_message_string() {
|
|
uint8_t i = 0, j = 0;
|
|
char c;
|
|
lcd_status_message[MAX_MESSAGE_LENGTH] = '\0';
|
|
while ((c = lcd_status_message[i]) && j < LCD_WIDTH) {
|
|
if (PRINTABLE(c)) j++;
|
|
i++;
|
|
}
|
|
if (true
|
|
#if ENABLED(STATUS_MESSAGE_SCROLLING)
|
|
&& j < LCD_WIDTH
|
|
#endif
|
|
) {
|
|
// pad with spaces to fill up the line
|
|
while (j++ < LCD_WIDTH) lcd_status_message[i++] = ' ';
|
|
// chop off at the edge
|
|
lcd_status_message[i] = '\0';
|
|
}
|
|
}
|
|
|
|
void lcd_finishstatus(const bool persist=false) {
|
|
|
|
pad_message_string();
|
|
|
|
#if !(ENABLED(LCD_PROGRESS_BAR) && (PROGRESS_MSG_EXPIRE > 0))
|
|
UNUSED(persist);
|
|
#endif
|
|
|
|
#if ENABLED(LCD_PROGRESS_BAR)
|
|
progress_bar_ms = millis();
|
|
#if PROGRESS_MSG_EXPIRE > 0
|
|
expire_status_ms = persist ? 0 : progress_bar_ms + PROGRESS_MSG_EXPIRE;
|
|
#endif
|
|
#endif
|
|
lcd_refresh();
|
|
|
|
#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
|
|
previous_lcd_status_ms = millis(); //get status message to show up for a while
|
|
#endif
|
|
|
|
#if ENABLED(STATUS_MESSAGE_SCROLLING)
|
|
status_scroll_pos = 0;
|
|
#endif
|
|
}
|
|
|
|
#if ENABLED(LCD_PROGRESS_BAR) && PROGRESS_MSG_EXPIRE > 0
|
|
void dontExpireStatus() { expire_status_ms = 0; }
|
|
#endif
|
|
|
|
bool lcd_hasstatus() { return (lcd_status_message[0] != '\0'); }
|
|
|
|
void lcd_setstatus(const char * const message, const bool persist) {
|
|
if (lcd_status_message_level > 0) return;
|
|
strncpy(lcd_status_message, message, MAX_MESSAGE_LENGTH);
|
|
lcd_finishstatus(persist);
|
|
}
|
|
|
|
void lcd_setstatusPGM(const char * const message, int8_t level) {
|
|
if (level < 0) level = lcd_status_message_level = 0;
|
|
if (level < lcd_status_message_level) return;
|
|
lcd_status_message_level = level;
|
|
strncpy_P(lcd_status_message, message, MAX_MESSAGE_LENGTH);
|
|
lcd_finishstatus(level > 0);
|
|
}
|
|
|
|
void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...) {
|
|
if (level < lcd_status_message_level) return;
|
|
lcd_status_message_level = level;
|
|
va_list args;
|
|
va_start(args, fmt);
|
|
vsnprintf_P(lcd_status_message, MAX_MESSAGE_LENGTH, fmt, args);
|
|
va_end(args);
|
|
lcd_finishstatus(level > 0);
|
|
}
|
|
|
|
void lcd_setalertstatusPGM(const char * const message) {
|
|
lcd_setstatusPGM(message, 1);
|
|
#if ENABLED(ULTIPANEL)
|
|
lcd_return_to_status();
|
|
#endif
|
|
}
|
|
|
|
void lcd_reset_alert_level() { lcd_status_message_level = 0; }
|
|
|
|
#if HAS_LCD_CONTRAST
|
|
|
|
void set_lcd_contrast(const int16_t value) {
|
|
lcd_contrast = constrain(value, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX);
|
|
u8g.setContrast(lcd_contrast);
|
|
}
|
|
|
|
#endif
|
|
|
|
#if ENABLED(ULTIPANEL)
|
|
|
|
/**
|
|
* Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
|
|
* These values are independent of which pins are used for EN_A and EN_B indications
|
|
* The rotary encoder part is also independent to the chipset used for the LCD
|
|
*/
|
|
#if defined(EN_A) && defined(EN_B)
|
|
#define encrot0 0
|
|
#define encrot1 2
|
|
#define encrot2 3
|
|
#define encrot3 1
|
|
#endif
|
|
|
|
#define GET_SHIFT_BUTTON_STATES(DST) \
|
|
uint8_t new_##DST = 0; \
|
|
WRITE(SHIFT_LD, LOW); \
|
|
WRITE(SHIFT_LD, HIGH); \
|
|
for (int8_t i = 0; i < 8; i++) { \
|
|
new_##DST >>= 1; \
|
|
if (READ(SHIFT_OUT)) SBI(new_##DST, 7); \
|
|
WRITE(SHIFT_CLK, HIGH); \
|
|
WRITE(SHIFT_CLK, LOW); \
|
|
} \
|
|
DST = ~new_##DST; //invert it, because a pressed switch produces a logical 0
|
|
|
|
|
|
/**
|
|
* Read encoder buttons from the hardware registers
|
|
* Warning: This function is called from interrupt context!
|
|
*/
|
|
void lcd_buttons_update() {
|
|
static uint8_t lastEncoderBits;
|
|
const millis_t now = millis();
|
|
if (ELAPSED(now, next_button_update_ms)) {
|
|
|
|
#if ENABLED(NEWPANEL)
|
|
uint8_t newbutton = 0;
|
|
|
|
#if BUTTON_EXISTS(EN1)
|
|
if (BUTTON_PRESSED(EN1)) newbutton |= EN_A;
|
|
#endif
|
|
|
|
#if BUTTON_EXISTS(EN2)
|
|
if (BUTTON_PRESSED(EN2)) newbutton |= EN_B;
|
|
#endif
|
|
|
|
#if BUTTON_EXISTS(ENC)
|
|
if (BUTTON_PRESSED(ENC)) newbutton |= EN_C;
|
|
#endif
|
|
#if BUTTON_EXISTS(BACK)
|
|
if (BUTTON_PRESSED(BACK)) newbutton |= EN_D;
|
|
#endif
|
|
|
|
//
|
|
// Directional buttons
|
|
//
|
|
#if LCD_HAS_DIRECTIONAL_BUTTONS
|
|
|
|
#if ENABLED(REVERSE_MENU_DIRECTION)
|
|
#define _ENCODER_UD_STEPS (ENCODER_STEPS_PER_MENU_ITEM * encoderDirection)
|
|
#else
|
|
#define _ENCODER_UD_STEPS ENCODER_STEPS_PER_MENU_ITEM
|
|
#endif
|
|
#if ENABLED(REVERSE_ENCODER_DIRECTION)
|
|
#define ENCODER_UD_STEPS _ENCODER_UD_STEPS
|
|
#define ENCODER_LR_PULSES ENCODER_PULSES_PER_STEP
|
|
#else
|
|
#define ENCODER_UD_STEPS -(_ENCODER_UD_STEPS)
|
|
#define ENCODER_LR_PULSES -(ENCODER_PULSES_PER_STEP)
|
|
#endif
|
|
|
|
if (false) {
|
|
// for the else-ifs below
|
|
}
|
|
#if BUTTON_EXISTS(UP)
|
|
else if (BUTTON_PRESSED(UP)) {
|
|
encoderDiff = -(ENCODER_UD_STEPS);
|
|
next_button_update_ms = now + 300;
|
|
}
|
|
#endif
|
|
#if BUTTON_EXISTS(DWN)
|
|
else if (BUTTON_PRESSED(DWN)) {
|
|
encoderDiff = ENCODER_UD_STEPS;
|
|
next_button_update_ms = now + 300;
|
|
}
|
|
#endif
|
|
#if BUTTON_EXISTS(LFT)
|
|
else if (BUTTON_PRESSED(LFT)) {
|
|
encoderDiff = -(ENCODER_LR_PULSES);
|
|
next_button_update_ms = now + 300;
|
|
}
|
|
#endif
|
|
#if BUTTON_EXISTS(RT)
|
|
else if (BUTTON_PRESSED(RT)) {
|
|
encoderDiff = ENCODER_LR_PULSES;
|
|
next_button_update_ms = now + 300;
|
|
}
|
|
#endif
|
|
|
|
#endif // LCD_HAS_DIRECTIONAL_BUTTONS
|
|
|
|
buttons = newbutton;
|
|
#if ENABLED(LCD_HAS_SLOW_BUTTONS)
|
|
buttons |= slow_buttons;
|
|
#endif
|
|
|
|
#if ENABLED(ADC_KEYPAD)
|
|
|
|
uint8_t newbutton_reprapworld_keypad = 0;
|
|
buttons = 0;
|
|
if (buttons_reprapworld_keypad == 0) {
|
|
newbutton_reprapworld_keypad = get_ADC_keyValue();
|
|
if (WITHIN(newbutton_reprapworld_keypad, 1, 8))
|
|
buttons_reprapworld_keypad = _BV(newbutton_reprapworld_keypad - 1);
|
|
}
|
|
|
|
#elif ENABLED(REPRAPWORLD_KEYPAD)
|
|
|
|
GET_SHIFT_BUTTON_STATES(buttons_reprapworld_keypad);
|
|
|
|
#endif
|
|
|
|
#else // !NEWPANEL
|
|
|
|
GET_SHIFT_BUTTON_STATES(buttons);
|
|
|
|
#endif
|
|
|
|
} // next_button_update_ms
|
|
|
|
// Manage encoder rotation
|
|
#if ENABLED(REVERSE_MENU_DIRECTION) && ENABLED(REVERSE_ENCODER_DIRECTION)
|
|
#define ENCODER_DIFF_CW (encoderDiff -= encoderDirection)
|
|
#define ENCODER_DIFF_CCW (encoderDiff += encoderDirection)
|
|
#elif ENABLED(REVERSE_MENU_DIRECTION)
|
|
#define ENCODER_DIFF_CW (encoderDiff += encoderDirection)
|
|
#define ENCODER_DIFF_CCW (encoderDiff -= encoderDirection)
|
|
#elif ENABLED(REVERSE_ENCODER_DIRECTION)
|
|
#define ENCODER_DIFF_CW (encoderDiff--)
|
|
#define ENCODER_DIFF_CCW (encoderDiff++)
|
|
#else
|
|
#define ENCODER_DIFF_CW (encoderDiff++)
|
|
#define ENCODER_DIFF_CCW (encoderDiff--)
|
|
#endif
|
|
#define ENCODER_SPIN(_E1, _E2) switch (lastEncoderBits) { case _E1: ENCODER_DIFF_CW; break; case _E2: ENCODER_DIFF_CCW; }
|
|
|
|
uint8_t enc = 0;
|
|
if (buttons & EN_A) enc |= B01;
|
|
if (buttons & EN_B) enc |= B10;
|
|
if (enc != lastEncoderBits) {
|
|
switch (enc) {
|
|
case encrot0: ENCODER_SPIN(encrot3, encrot1); break;
|
|
case encrot1: ENCODER_SPIN(encrot0, encrot2); break;
|
|
case encrot2: ENCODER_SPIN(encrot1, encrot3); break;
|
|
case encrot3: ENCODER_SPIN(encrot2, encrot0); break;
|
|
}
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
|
if (lcd_external_control) {
|
|
ubl.encoder_diff = encoderDiff; // Make encoder rotation available to UBL G29 mesh editing.
|
|
encoderDiff = 0; // Hide the encoder event from the current screen handler.
|
|
}
|
|
#endif
|
|
lastEncoderBits = enc;
|
|
}
|
|
}
|
|
|
|
#if (ENABLED(LCD_I2C_TYPE_MCP23017) || ENABLED(LCD_I2C_TYPE_MCP23008)) && ENABLED(DETECT_DEVICE)
|
|
bool lcd_detected() { return lcd.LcdDetected() == 1; }
|
|
#else
|
|
bool lcd_detected() { return true; }
|
|
#endif
|
|
|
|
#if ENABLED(G26_MESH_VALIDATION)
|
|
void lcd_chirp() {
|
|
#if ENABLED(LCD_USE_I2C_BUZZER)
|
|
lcd.buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
|
|
#elif PIN_EXISTS(BEEPER)
|
|
buzzer.tone(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
|
|
bool is_lcd_clicked() { return LCD_CLICKED; }
|
|
void wait_for_release() {
|
|
while (is_lcd_clicked()) safe_delay(50);
|
|
safe_delay(50);
|
|
}
|
|
#endif
|
|
|
|
#endif // ULTIPANEL
|
|
|
|
#if ENABLED(ADC_KEYPAD)
|
|
|
|
typedef struct {
|
|
uint16_t ADCKeyValueMin, ADCKeyValueMax;
|
|
uint8_t ADCKeyNo;
|
|
} _stADCKeypadTable_;
|
|
|
|
static const _stADCKeypadTable_ stADCKeyTable[] PROGMEM = {
|
|
// VALUE_MIN, VALUE_MAX, KEY
|
|
{ 4000, 4096, BLEN_REPRAPWORLD_KEYPAD_F1 + 1 }, // F1
|
|
{ 4000, 4096, BLEN_REPRAPWORLD_KEYPAD_F2 + 1 }, // F2
|
|
{ 4000, 4096, BLEN_REPRAPWORLD_KEYPAD_F3 + 1 }, // F3
|
|
{ 300, 500, BLEN_REPRAPWORLD_KEYPAD_LEFT + 1 }, // LEFT
|
|
{ 1900, 2200, BLEN_REPRAPWORLD_KEYPAD_RIGHT + 1 }, // RIGHT
|
|
{ 570, 870, BLEN_REPRAPWORLD_KEYPAD_UP + 1 }, // UP
|
|
{ 2670, 2870, BLEN_REPRAPWORLD_KEYPAD_DOWN + 1 }, // DOWN
|
|
{ 1150, 1450, BLEN_REPRAPWORLD_KEYPAD_MIDDLE + 1 }, // ENTER
|
|
};
|
|
|
|
uint8_t get_ADC_keyValue(void) {
|
|
if (thermalManager.ADCKey_count >= 16) {
|
|
const uint16_t currentkpADCValue = thermalManager.current_ADCKey_raw >> 2;
|
|
#if ENABLED(ADC_KEYPAD_DEBUG)
|
|
SERIAL_PROTOCOLLN(currentkpADCValue);
|
|
#endif
|
|
thermalManager.current_ADCKey_raw = 0;
|
|
thermalManager.ADCKey_count = 0;
|
|
if (currentkpADCValue < 4000)
|
|
for (uint8_t i = 0; i < ADC_KEY_NUM; i++) {
|
|
const uint16_t lo = pgm_read_word(&stADCKeyTable[i].ADCKeyValueMin),
|
|
hi = pgm_read_word(&stADCKeyTable[i].ADCKeyValueMax);
|
|
if (WITHIN(currentkpADCValue, lo, hi)) return pgm_read_byte(&stADCKeyTable[i].ADCKeyNo);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#endif // ULTRA_LCD
|