History

Scott Lahteine b7ddfddf51 Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values. Co-Authored-By: ejtagle <ejtagle@hotmail.com>		2018-06-10 01:56:00 -05:00
..
Dual-head	Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping	2018-06-10 01:56:00 -05:00
Configuration_adv.h	Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping	2018-06-10 01:56:00 -05:00
Configuration.h	Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping	2018-06-10 01:56:00 -05:00
README.md	Synchronize configs with 2.0.x	2017-12-31 00:02:22 -06:00

README.md

Configuration for Velleman K8400 Vertex

http://www.k8400.eu/

Configuration files for the K8400, ported upstream from the official Velleman firmware. Like its predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h.

Single and dual head configurations provided. Copy the correct Configuration.h and Configuration_adv.h to the /src/config directory.

NOTE: This configuration includes the community sourced feed rate fix. Use 100% feed rate in Repetier!

For implementation and updated K8400 firmware, see https://github.com/birkett/Velleman-K8400-Firmware

Original Sources

Credit to Velleman for the original 1.0.x based code:
http://www.vertex3dprinter.eu/downloads/files/vertex/firmware/vertex-m1-v1.4-h2.zip