8ac5b29e02
Changed to report on individual lines with "TRIGGERED" or "open" instead of "H" or "L" on one line as H&L could be confused with logic levels High and Low which may be wrong if using inverted logic. Added strings to language.h.
Fixed typo "deu" in English language that was fixed in #134 but got added back in via 9f7f7354f5
507 lines
21 KiB
C
507 lines
21 KiB
C
#ifndef LANGUAGE_H
|
|
#define LANGUAGE_H
|
|
|
|
// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
|
|
//
|
|
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
|
|
// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
|
|
|
|
// Languages
|
|
// 1 English
|
|
// 2 -
|
|
// 3 French (Waiting translation)
|
|
// 4 German
|
|
// 5 Spanish
|
|
// 6 Etc
|
|
|
|
#define LANGUAGE_CHOICE 1 // Pick your language from the list above
|
|
|
|
#define PROTOCOL_VERSION "1.0"
|
|
|
|
#if MOTHERBOARD == 7 || MOTHERBOARD == 71
|
|
#define MACHINE_NAME "Ultimaker"
|
|
#define FIRMWARE_URL "http://firmware.ultimaker.com"
|
|
#else
|
|
#define MACHINE_NAME "Mendel"
|
|
#define FIRMWARE_URL "http://www.mendel-parts.com"
|
|
#endif
|
|
|
|
#define STRINGIFY_(n) #n
|
|
#define STRINGIFY(n) STRINGIFY_(n)
|
|
|
|
#if LANGUAGE_CHOICE == 1
|
|
|
|
// LCD Menu Messages
|
|
#define WELCOME_MSG MACHINE_NAME " Ready."
|
|
#define MSG_SD_INSERTED "Card inserted"
|
|
#define MSG_SD_REMOVED "Card removed"
|
|
#define MSG_MAIN " Main \003"
|
|
#define MSG_AUTOSTART " Autostart"
|
|
#define MSG_DISABLE_STEPPERS " Disable Steppers"
|
|
#define MSG_AUTO_HOME " Auto Home"
|
|
#define MSG_SET_ORIGIN " Set Origin"
|
|
#define MSG_PREHEAT_PLA " Preheat PLA"
|
|
#define MSG_PREHEAT_PLA_SETTINGS " Preheat PLA Setting"
|
|
#define MSG_PREHEAT_ABS " Preheat ABS"
|
|
#define MSG_PREHEAT_ABS_SETTINGS " Preheat ABS Setting"
|
|
#define MSG_COOLDOWN " Cooldown"
|
|
#define MSG_EXTRUDE " Extrude"
|
|
#define MSG_RETRACT " Retract"
|
|
#define MSG_PREHEAT_PLA " Preheat PLA"
|
|
#define MSG_PREHEAT_ABS " Preheat ABS"
|
|
#define MSG_MOVE_AXIS " Move Axis \x7E"
|
|
#define MSG_SPEED " Speed:"
|
|
#define MSG_NOZZLE " \002Nozzle:"
|
|
#define MSG_NOZZLE1 " \002Nozzle2:"
|
|
#define MSG_NOZZLE2 " \002Nozzle3:"
|
|
#define MSG_BED " \002Bed:"
|
|
#define MSG_FAN_SPEED " Fan speed:"
|
|
#define MSG_FLOW " Flow:"
|
|
#define MSG_CONTROL " Control \003"
|
|
#define MSG_MIN " \002 Min:"
|
|
#define MSG_MAX " \002 Max:"
|
|
#define MSG_FACTOR " \002 Fact:"
|
|
#define MSG_AUTOTEMP " Autotemp:"
|
|
#define MSG_ON "On "
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P " PID-P: "
|
|
#define MSG_PID_I " PID-I: "
|
|
#define MSG_PID_D " PID-D: "
|
|
#define MSG_PID_C " PID-C: "
|
|
#define MSG_ACC " Acc:"
|
|
#define MSG_VXY_JERK " Vxy-jerk: "
|
|
#define MSG_VMAX " Vmax "
|
|
#define MSG_X "x:"
|
|
#define MSG_Y "y:"
|
|
#define MSG_Z "z:"
|
|
#define MSG_E "e:"
|
|
#define MSG_VMIN " Vmin:"
|
|
#define MSG_VTRAV_MIN " VTrav min:"
|
|
#define MSG_AMAX " Amax "
|
|
#define MSG_A_RETRACT " A-retract:"
|
|
#define MSG_XSTEPS " Xsteps/mm:"
|
|
#define MSG_YSTEPS " Ysteps/mm:"
|
|
#define MSG_ZSTEPS " Zsteps/mm:"
|
|
#define MSG_ESTEPS " Esteps/mm:"
|
|
#define MSG_MAIN_WIDE " Main \003"
|
|
#define MSG_RECTRACT_WIDE " Rectract \x7E"
|
|
#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
|
|
#define MSG_TEMPERATURE_RTN " Temperature \003"
|
|
#define MSG_MOTION_WIDE " Motion \x7E"
|
|
#define MSG_STORE_EPROM " Store memory"
|
|
#define MSG_LOAD_EPROM " Load memory"
|
|
#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
|
|
#define MSG_REFRESH "\004Refresh"
|
|
#define MSG_WATCH " Watch \003"
|
|
#define MSG_PREPARE " Prepare \x7E"
|
|
#define MSG_PREPARE_ALT " Prepare \003"
|
|
#define MSG_CONTROL_ARROW " Control \x7E"
|
|
#define MSG_RETRACT_ARROW " Retract \x7E"
|
|
#define MSG_TUNE " Tune \x7E"
|
|
#define MSG_PAUSE_PRINT " Pause Print \x7E"
|
|
#define MSG_RESUME_PRINT " Resume Print \x7E"
|
|
#define MSG_STOP_PRINT " Stop Print \x7E"
|
|
#define MSG_CARD_MENU " Card Menu \x7E"
|
|
#define MSG_NO_CARD " No Card"
|
|
#define MSG_DWELL "Sleep..."
|
|
#define MSG_USERWAIT "Wait for user..."
|
|
#define MSG_NO_MOVE "No move."
|
|
#define MSG_PART_RELEASE "Partial Release"
|
|
#define MSG_KILLED "KILLED. "
|
|
#define MSG_STOPPED "STOPPED. "
|
|
#define MSG_STEPPER_RELEASED "Released."
|
|
#define MSG_CONTROL_RETRACT " Retract mm:"
|
|
#define MSG_CONTROL_RETRACTF " Retract F:"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
|
|
#define MSG_AUTORETRACT " AutoRetr.:"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "enqueing \""
|
|
#define MSG_POWERUP "PowerUp"
|
|
#define MSG_EXTERNAL_RESET " External Reset"
|
|
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
|
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
|
#define MSG_SOFTWARE_RESET " Software Reset"
|
|
#define MSG_MARLIN "Marlin "
|
|
#define MSG_AUTHOR " | Author: "
|
|
#define MSG_CONFIGURATION_VER " Last Updated: "
|
|
#define MSG_FREE_MEMORY " Free Memory: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Done saving file."
|
|
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
|
|
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
|
|
#define MSG_FILE_PRINTED "Done printing file"
|
|
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
|
#define MSG_END_FILE_LIST "End file list"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
|
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
|
#define MSG_HEATING "Heating..."
|
|
#define MSG_HEATING_COMPLETE "Heating done."
|
|
#define MSG_BED_HEATING "Bed Heating."
|
|
#define MSG_BED_DONE "Bed done."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
|
#define MSG_COUNT_X " Count X:"
|
|
#define MSG_ERR_KILLED "Printer halted. kill() called !!"
|
|
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)"
|
|
#define MSG_RESEND "Resend:"
|
|
#define MSG_UNKNOWN_COMMAND "Unknown command:\""
|
|
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
|
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Reporting endstop status"
|
|
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
|
#define MSG_ENDSTOP_OPEN "open"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
|
#define MSG_SD_INIT_FAIL "SD init fail"
|
|
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
|
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
|
#define MSG_SD_CARD_OK "SD card ok"
|
|
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
|
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
|
#define MSG_SD_FILE_OPENED "File opened:"
|
|
#define MSG_SD_SIZE " Size:"
|
|
#define MSG_SD_FILE_SELECTED "File selected"
|
|
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
|
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
|
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
|
|
|
|
#define MSG_STEPPER_TO_HIGH "Steprate to high : "
|
|
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
|
|
|
#endif
|
|
#if LANGUAGE_CHOICE == 4
|
|
|
|
// LCD Menu Messages
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " Bereit."
|
|
|
|
#define MSG_SD_INSERTED "SDKarte erkannt"
|
|
#define MSG_SD_REMOVED "SDKarte entfernt"
|
|
#define MSG_MAIN " Hauptmneü \003"
|
|
#define MSG_AUTOSTART " Autostart"
|
|
#define MSG_DISABLE_STEPPERS " Stepper abschalten"
|
|
#define MSG_AUTO_HOME " Auto Nullpunkt"
|
|
#define MSG_SET_ORIGIN " Setze Nullpunkt"
|
|
#define MSG_PREHEAT_PLA " Vorwärmen PLA"
|
|
#define MSG_PREHEAT_PLA_SETTINGS " Vorwärmen PLA Einstellungen"
|
|
#define MSG_PREHEAT_ABS " Vorwärmen ABS"
|
|
#define MSG_PREHEAT_ABS_SETTINGS " Vorwärmen ABS Einstellungen"
|
|
#define MSG_COOLDOWN " Abkühlen"
|
|
#define MSG_EXTRUDE " Extrude"
|
|
#define MSG_RETRACT " Retract"
|
|
#define MSG_MOVE_AXIS " Achsen bewegen\x7E"
|
|
#define MSG_SPEED " Geschw:"
|
|
#define MSG_NOZZLE " \002Düse:"
|
|
#define MSG_NOZZLE1 " \002Düse2:"
|
|
#define MSG_NOZZLE2 " \002Düse3:"
|
|
#define MSG_BED " \002Bett:"
|
|
#define MSG_FAN_SPEED " Lüftergeschw.:"
|
|
#define MSG_FLOW " Fluß:"
|
|
#define MSG_CONTROL " Einstellungen \003"
|
|
#define MSG_MIN " \002 Min:"
|
|
#define MSG_MAX " \002 Max:"
|
|
#define MSG_FACTOR " \002 Faktor:"
|
|
#define MSG_AUTOTEMP " AutoTemp:"
|
|
#define MSG_ON "Ein "
|
|
#define MSG_OFF "Aus "
|
|
#define MSG_PID_P " PID-P: "
|
|
#define MSG_PID_I " PID-I: "
|
|
#define MSG_PID_D " PID-D: "
|
|
#define MSG_PID_C " PID-C: "
|
|
#define MSG_ACC " Acc:"
|
|
#define MSG_VXY_JERK " Vxy-jerk: "
|
|
#define MSG_VMAX " Vmax "
|
|
#define MSG_X "x:"
|
|
#define MSG_Y "y:"
|
|
#define MSG_Z "z:"
|
|
#define MSG_E "e:"
|
|
#define MSG_VMIN " Vmin:"
|
|
#define MSG_VTRAV_MIN " VTrav min:"
|
|
#define MSG_AMAX " Amax "
|
|
#define MSG_A_RETRACT " A-Retract:"
|
|
#define MSG_XSTEPS " Xsteps/mm:"
|
|
#define MSG_YSTEPS " Ysteps/mm:"
|
|
#define MSG_ZSTEPS " Zsteps/mm:"
|
|
#define MSG_ESTEPS " Esteps/mm:"
|
|
#define MSG_MAIN_WIDE " Hauptmenü \003"
|
|
#define MSG_RECTRACT_WIDE " Rectract \x7E"
|
|
#define MSG_WATCH " Beobachten \003"
|
|
#define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
|
|
#define MSG_TEMPERATURE_RTN " Temperatur \003"
|
|
#define MSG_MOTION_WIDE " Bewegung \x7E"
|
|
#define MSG_STORE_EPROM " EPROM speichern"
|
|
#define MSG_LOAD_EPROM " EPROM laden"
|
|
#define MSG_RESTORE_FAILSAFE " Standardkonfig."
|
|
#define MSG_REFRESH "\004Aktualisieren"
|
|
#define MSG_PREPARE " Vorbereitung \x7E"
|
|
#define MSG_PREPARE_ALT " Vorbereitung \003"
|
|
#define MSG_CONTROL_ARROW " Einstellungen \x7E"
|
|
#define MSG_TUNE " Justierung \x7E"
|
|
#define MSG_PAUSE_PRINT " Druck anhalten\x7E"
|
|
#define MSG_RESUME_PRINT " Druck fortsetz\x7E"
|
|
#define MSG_STOP_PRINT " Druck stoppen \x7E"
|
|
#define MSG_CARD_MENU " SDKarten Menü \x7E"
|
|
#define MSG_NO_CARD " Keine SDKarte"
|
|
#define MSG_DWELL "Warten..."
|
|
#define MSG_USERWAIT "Warte auf Nutzer..."
|
|
#define MSG_NO_MOVE "Kein Zug."
|
|
#define MSG_PART_RELEASE "Stepper tlw frei"
|
|
#define MSG_KILLED "KILLED"
|
|
#define MSG_STOPPED "GESTOPPT"
|
|
#define MSG_STEPPER_RELEASED "Stepper frei"
|
|
#define MSG_CONTROL_RETRACT " Retract mm:"
|
|
#define MSG_CONTROL_RETRACTF " Retract F:"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
|
|
#define MSG_AUTORETRACT " AutoRetr.:"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in Menüstruktur."
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "enqueing \""
|
|
#define MSG_POWERUP "PowerUp"
|
|
#define MSG_EXTERNAL_RESET " External Reset"
|
|
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
|
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
|
#define MSG_SOFTWARE_RESET " Software Reset"
|
|
#define MSG_MARLIN "Marlin: "
|
|
#define MSG_AUTHOR " | Author: "
|
|
#define MSG_CONFIGURATION_VER " Last Updated: "
|
|
#define MSG_FREE_MEMORY " Free Memory: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Done saving file."
|
|
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
|
|
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
|
|
#define MSG_FILE_PRINTED "Done printing file"
|
|
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
|
#define MSG_END_FILE_LIST "End file list"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
|
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
|
#define MSG_HEATING "Heating..."
|
|
#define MSG_HEATING_COMPLETE "Heating done."
|
|
#define MSG_BED_HEATING "Bed Heating."
|
|
#define MSG_BED_DONE "Bed done."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
|
#define MSG_COUNT_X " Count X:"
|
|
#define MSG_ERR_KILLED "Printer halted. kill() called !!"
|
|
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
|
|
#define MSG_RESEND "Resend:"
|
|
#define MSG_UNKNOWN_COMMAND "Unknown command:\""
|
|
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
|
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Reporting endstop status"
|
|
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
|
#define MSG_ENDSTOP_OPEN "open"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
|
#define MSG_SD_INIT_FAIL "SD init fail"
|
|
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
|
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
|
#define MSG_SD_CARD_OK "SD card ok"
|
|
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
|
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
|
#define MSG_SD_FILE_OPENED "File opened:"
|
|
#define MSG_SD_SIZE " Size:"
|
|
#define MSG_SD_FILE_SELECTED "File selected"
|
|
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
|
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
|
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
|
|
|
|
#define MSG_STEPPER_TO_HIGH "Steprate to high : "
|
|
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
|
|
|
#endif
|
|
|
|
#if LANGUAGE_CHOICE == 5
|
|
|
|
// LCD Menu Messages
|
|
#define WELCOME_MSG MACHINE_NAME " Lista."
|
|
#define MSG_SD_INSERTED "Tarjeta SD Colocada"
|
|
#define MSG_SD_REMOVED "Tarjeta SD Retirada"
|
|
#define MSG_MAIN " Menu Principal \003"
|
|
#define MSG_AUTOSTART " Autostart"
|
|
#define MSG_DISABLE_STEPPERS " Apagar Motores"
|
|
#define MSG_AUTO_HOME " Llevar Ejes al Cero"
|
|
#define MSG_SET_ORIGIN " Establecer Cero"
|
|
#define MSG_COOLDOWN " Enfriar"
|
|
#define MSG_EXTRUDE " Extruir"
|
|
#define MSG_RETRACT " Retract"
|
|
#define MSG_PREHEAT_PLA " Precalentar PLA"
|
|
#define MSG_PREHEAT_PLA_SETTINGS " Precalentar PLA Setting"
|
|
#define MSG_PREHEAT_ABS " Precalentar ABS"
|
|
#define MSG_PREHEAT_ABS_SETTINGS " Precalentar ABS Setting"
|
|
#define MSG_MOVE_AXIS " Mover Ejes \x7E"
|
|
#define MSG_SPEED " Velocidad:"
|
|
#define MSG_NOZZLE " \002Nozzle:"
|
|
#define MSG_NOZZLE1 " \002Nozzle2:"
|
|
#define MSG_NOZZLE2 " \002Nozzle3:"
|
|
#define MSG_BED " \002Base:"
|
|
#define MSG_FAN_SPEED " Ventilador:"
|
|
#define MSG_FLOW " Flujo:"
|
|
#define MSG_CONTROL " Control \003"
|
|
#define MSG_MIN " \002 Min:"
|
|
#define MSG_MAX " \002 Max:"
|
|
#define MSG_FACTOR " \002 Fact:"
|
|
#define MSG_AUTOTEMP " Autotemp:"
|
|
#define MSG_ON "On "
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P " PID-P: "
|
|
#define MSG_PID_I " PID-I: "
|
|
#define MSG_PID_D " PID-D: "
|
|
#define MSG_PID_C " PID-C: "
|
|
#define MSG_ACC " Acc:"
|
|
#define MSG_VXY_JERK " Vxy-jerk: "
|
|
#define MSG_VMAX " Vmax "
|
|
#define MSG_X "x:"
|
|
#define MSG_Y "y:"
|
|
#define MSG_Z "z:"
|
|
#define MSG_E "e:"
|
|
#define MSG_VMIN " Vmin:"
|
|
#define MSG_VTRAV_MIN " VTrav min:"
|
|
#define MSG_AMAX " Amax "
|
|
#define MSG_A_RETRACT " A-retrac.:"
|
|
#define MSG_XSTEPS " Xpasos/mm:"
|
|
#define MSG_YSTEPS " Ypasos/mm:"
|
|
#define MSG_ZSTEPS " Zpasos/mm:"
|
|
#define MSG_ESTEPS " Epasos/mm:"
|
|
#define MSG_MAIN_WIDE " Menu Principal \003"
|
|
#define MSG_RECTRACT_WIDE " Retraer \x7E"
|
|
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
|
|
#define MSG_TEMPERATURE_RTN " Temperatura \003"
|
|
#define MSG_MOTION_WIDE " Movimiento \x7E"
|
|
#define MSG_STORE_EPROM " Guardar Memoria"
|
|
#define MSG_LOAD_EPROM " Cargar Memoria"
|
|
#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
|
|
#define MSG_REFRESH "\004Volver a cargar"
|
|
#define MSG_WATCH " Monitorizar \003"
|
|
#define MSG_PREPARE " Preparar \x7E"
|
|
#define MSG_PREPARE_ALT " Preparar \003"
|
|
#define MSG_CONTROL_ARROW " Control \x7E"
|
|
#define MSG_RETRACT_ARROW " Control \x7E"
|
|
#define MSG_TUNE " Ajustar \x7E"
|
|
#define MSG_PAUSE_PRINT " Pause Print \x7E"
|
|
#define MSG_RESUME_PRINT " Resume Print \x7E"
|
|
#define MSG_STOP_PRINT " Detener Impresion \x7E"
|
|
#define MSG_CARD_MENU " Menu de SD \x7E"
|
|
#define MSG_NO_CARD " No hay Tarjeta SD"
|
|
#define MSG_DWELL "Reposo..."
|
|
#define MSG_USERWAIT "Esperando Ordenes..."
|
|
#define MSG_NO_MOVE "Sin movimiento"
|
|
#define MSG_PART_RELEASE "Desacople Parcial"
|
|
#define MSG_KILLED "PARADA DE EMERGENCIA. "
|
|
#define MSG_STOPPED "PARADA. "
|
|
#define MSG_STEPPER_RELEASED "Desacoplada."
|
|
#define MSG_CONTROL_RETRACT " Retraer mm:"
|
|
#define MSG_CONTROL_RETRACTF " Retraer F:"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
|
|
#define MSG_AUTORETRACT " AutoRetr.:"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Hay un error en la estructura del menu"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "En cola \""
|
|
#define MSG_POWERUP "PowerUp"
|
|
#define MSG_EXTERNAL_RESET " Reset Externo"
|
|
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
|
|
#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
|
|
#define MSG_SOFTWARE_RESET " Reset por Software"
|
|
#define MSG_MARLIN "Marlin "
|
|
#define MSG_AUTHOR " | Autor: "
|
|
#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
|
|
#define MSG_FREE_MEMORY " Memoria libre: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Guardado."
|
|
#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
|
|
#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
|
|
#define MSG_FILE_PRINTED "Impresion terminada"
|
|
#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
|
|
#define MSG_END_FILE_LIST "Fin de la lista de archivos"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
|
|
#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
|
|
#define MSG_HEATING "Calentando..."
|
|
#define MSG_HEATING_COMPLETE "Calentamiento Hecho."
|
|
#define MSG_BED_HEATING "Calentando la base."
|
|
#define MSG_BED_DONE "Base Caliente."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
|
#define MSG_COUNT_X " Cuenta X:"
|
|
#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
|
|
#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
|
|
#define MSG_RESEND "Reenviar:"
|
|
#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
|
|
#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
|
|
#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_M119_REPORT "Reporting endstop status"
|
|
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
|
#define MSG_ENDSTOP_OPEN "open"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
|
|
#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
|
|
#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
|
|
#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
|
|
#define MSG_SD_CARD_OK "Tarjeta SD OK"
|
|
#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
|
|
#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
|
|
#define MSG_SD_FILE_OPENED "Archivo abierto:"
|
|
#define MSG_SD_SIZE " Tamaño:"
|
|
#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
|
|
#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
|
|
#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
|
|
#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "No se puede entrar en la carpeta:"
|
|
|
|
#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
|
|
#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
|
|
|
|
#endif
|
|
#endif // ifndef LANGUAGE_H
|