Firmware/Marlin/example_configurations/Velleman/K8400
Roxy-3D c8d3069580
UBL - Allow user to control Z-Height correction for off mesh movements (#9663)
* UBL - Allow user to control Z-Height correction for off mesh movements

* Enable UBL_Z_RAISE_WHEN_OFF_MESH on test machine for time being
2018-02-15 19:23:01 -06:00
..
Dual-head UBL - Allow user to control Z-Height correction for off mesh movements (#9663) 2018-02-15 19:23:01 -06:00
Configuration_adv.h Update DIGIPOT_I2C_MOTOR_CURRENTS comments 2018-02-13 22:56:03 -06:00
Configuration.h UBL - Allow user to control Z-Height correction for off mesh movements (#9663) 2018-02-15 19:23:01 -06:00
README.md Synchronize configs with 2.0.x 2017-12-31 00:02:22 -06:00

Configuration for Velleman K8400 Vertex

http://www.k8400.eu/

Configuration files for the K8400, ported upstream from the official Velleman firmware. Like its predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h.

Single and dual head configurations provided. Copy the correct Configuration.h and Configuration_adv.h to the /src/config directory.

NOTE: This configuration includes the community sourced feed rate fix. Use 100% feed rate in Repetier!

For implementation and updated K8400 firmware, see https://github.com/birkett/Velleman-K8400-Firmware

Original Sources

Credit to Velleman for the original 1.0.x based code:
http://www.vertex3dprinter.eu/downloads/files/vertex/firmware/vertex-m1-v1.4-h2.zip