MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
cbdbeb3e69
Firmware/Marlin
History
Roxy-3D cbdbeb3e69
PronterFace M105 work around (#9227) 
PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical).

This causes the printer to say "Click to resume..."

This is a temporary fix until we figure out the correct way to resolve the issue.

More work needed for G26.
2018-01-17 22:51:19 -06:00
..
example_configurations PronterFace M105 work around (#9227) 2018-01-17 22:51:19 -06:00
bitmap_flags.h Parity with 2.0.x bitmap functions 2017-11-25 19:56:22 -06:00
blinkm.cpp Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
blinkm.h Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
boards.h Creality Ender support. 2018-01-15 03:39:43 -06:00
buzzer.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
cardreader.cpp Fix UBL compilation warnings 2018-01-02 19:41:02 -06:00
cardreader.h SD Menu patches 2017-11-26 01:10:06 -06:00
circularqueue.h
Conditionals_LCD.h Adding support for using the MKS_12864OLED with the SSD1306 controller 2017-12-16 17:44:34 -06:00
Conditionals_post.h Fix mesh size... 2018-01-17 09:33:18 -06:00
Conditionals.h
Configuration_adv.h More up-front option to show SD percentage 2018-01-14 23:30:59 -06:00
configuration_store.cpp Patch EEPROM for 32-bit 2018-01-14 23:18:45 -06:00
configuration_store.h UBL G29 works without settings.load 2018-01-05 15:47:52 -06:00
Configuration.h Followup to Ender config 2018-01-15 05:48:50 -06:00
dac_mcp4728.cpp Fix get/setDrvPct declarations 2017-06-09 20:21:28 -07:00
dac_mcp4728.h Fix get/setDrvPct declarations 2017-06-09 20:21:28 -07:00
digipot_mcp4018.cpp Fix: set digipot mcp4018 Vrefmax to 1.666V 2017-06-24 12:35:34 -05:00
digipot_mcp4451.cpp Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00
dogm_bitmaps.h Followup to Ender config 2018-01-15 05:48:50 -06:00
dogm_font_data_6x9_marlin.h
dogm_font_data_HD44780_C.h
dogm_font_data_HD44780_J.h
dogm_font_data_HD44780_W.h
dogm_font_data_ISO10646_1_PL.h
dogm_font_data_ISO10646_1_tr.h
dogm_font_data_ISO10646_1.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
dogm_font_data_ISO10646_5_Cyrillic.h
dogm_font_data_ISO10646_CN.h
dogm_font_data_ISO10646_CZ.h UTF-8 mapper for Czech 2017-07-04 15:51:23 -05:00
dogm_font_data_ISO10646_Greek.h
dogm_font_data_ISO10646_Kana.h
dogm_font_data_ISO10646_SK.h Added Slovak C2C3C4 mapper implementation. 2017-10-06 14:40:15 -05:00
dogm_font_data_Marlin_symbols.h
duration_t.h
endstop_interrupts.h General code/bitmaps cleanup 2017-12-13 17:57:54 -06:00
endstops.cpp General code/bitmaps cleanup 2017-12-13 17:57:54 -06:00
endstops.h Set initial endstops state 2017-12-05 01:08:39 -06:00
enum.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
fastio_168.h
fastio_644.h
fastio_1280.h
fastio_1281.h
fastio_AT90USB.h Tweaks for M43 2017-07-06 21:47:50 -05:00
fastio.h Drop fastio timer cruft 2017-06-15 14:43:40 -05:00
fwretract.cpp Make FWRetract class for 2.0.x parity 2018-01-04 17:54:24 -06:00
fwretract.h Make FWRetract class for 2.0.x parity 2018-01-04 17:54:24 -06:00
G26_Mesh_Validation_Tool.cpp PronterFace M105 work around (#9227) 2018-01-17 22:51:19 -06:00
gcode.cpp Fix parser value handling 2017-11-14 23:23:22 -06:00
gcode.h Add pre-calculated planner.e_factor 2017-11-10 20:09:59 -06:00
hex_print_routines.cpp New GCode Parser - Implementation 2017-05-23 14:15:10 -05:00
hex_print_routines.h New GCode Parser - Implementation 2017-05-23 14:15:10 -05:00
I2CPositionEncoder.cpp Followup for I2C_POSITION_ENCODERS 2017-06-27 20:46:40 -05:00
I2CPositionEncoder.h Updates to TMC support 2018-01-10 04:32:49 -06:00
language_an.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_bg.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_ca.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_cn.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_cz_utf8.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_cz.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_da.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_de.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_el-gr.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_el.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_en.h Creality Ender support. 2018-01-15 03:39:43 -06:00
language_es.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_eu.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_fi.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_fr_utf8.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_fr.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_gl.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_hr.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_it.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_kana_utf8.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_kana.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_nl.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_pl-DOGM.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_pl-HD44780.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_pl.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_pt_utf8.h Fix WELCOME_MSG in PT 2017-12-24 18:45:16 -06:00
language_pt-br_utf8.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_pt-br.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
language_pt.h Fix WELCOME_MSG in PT 2017-12-24 18:42:50 -06:00
language_ru.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_sk_utf8.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_test.h Update links to old wiki page 2017-09-23 22:06:45 -05:00
language_tr.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_uk.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_zh_CN.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language_zh_TW.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
language.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
least_squares_fit.cpp Apply coding standards to recent merges 2017-07-13 00:46:16 -05:00
least_squares_fit.h Apply coding standards to recent merges 2017-07-13 00:46:16 -05:00
leds.cpp Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
leds.h Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
M100_Free_Mem_Chk.cpp Apply const, spacing, etc. 2017-06-27 05:23:49 -05:00
macros.h Update macros for parity with 2.0.x 2017-11-10 04:32:27 -06:00
Makefile Creality Ender support. 2018-01-15 03:39:43 -06:00
Marlin_main.cpp Cleanup spacing, commentary 2018-01-11 18:52:54 -06:00
Marlin.h Updates to TMC support 2018-01-10 04:32:49 -06:00
Marlin.ino
MarlinConfig.h Updates to TMC support 2018-01-10 04:32:49 -06:00
MarlinSerial.cpp PronterFace M105 work around (#9227) 2018-01-17 22:51:19 -06:00
MarlinSerial.h Remove redundant serial sanity check 2017-12-19 19:07:20 -06:00
MarlinSPI.h Fix PlatformIO dependencies 2017-11-16 15:16:21 -06:00
Max7219_Debug_LEDs.cpp Apply coding standards to Max7219 code 2017-11-17 15:33:55 -06:00
Max7219_Debug_LEDs.h Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104) 2017-10-26 11:44:55 -05:00
mesh_bed_leveling.cpp Make mbl.has_mesh() a method 2018-01-07 18:14:37 -06:00
mesh_bed_leveling.h Make mbl.has_mesh() a method 2018-01-07 18:14:37 -06:00
neopixel.cpp Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
neopixel.h Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
nozzle.cpp [1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8864) 2017-12-24 23:47:05 -06:00
nozzle.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
pca9632.cpp Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
pca9632.h Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
pins_3DRAG.h
pins_5DPRINT.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_ANET_10.h Adding support for the Tronxy and Zonestar LCD 2017-12-15 19:13:31 -06:00
pins_AZTEEG_X1.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_AZTEEG_X3_PRO.h Unify AVR90USB: Pins cleanup 2017-06-09 18:48:12 -05:00
pins_AZTEEG_X3.h Apply some tweaks based on 2.0.x 2017-10-09 17:39:03 -05:00
pins_BAM_DICE_DUE.h
pins_BQ_ZUM_MEGA_3D.h Add support for BQ heated bed kit with Hephestos 2 2017-07-07 03:10:38 -05:00
pins_BRAINWAVE_PRO.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_BRAINWAVE.h Remove extraneous USBCON defines for AT90USB boards 2017-07-23 16:41:48 -07:00
pins_CHEAPTRONIC.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_CHEAPTRONICv2.h Whitespace cleanup 2018-01-05 10:19:15 -06:00
pins_CNCONTROLS_11.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_CNCONTROLS_12.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_CREALITY_ENDER.h Creality Ender support. 2018-01-15 03:39:43 -06:00
pins_ELEFU_3.h
pins_FELIX2.h SPINDLE/LASER pins changes 2017-05-17 04:23:06 -05:00
pins_GEN3_MONOLITHIC.h
pins_GEN3_PLUS.h
pins_GEN6_DELUXE.h
pins_GEN6.h Minor patches to pins files 2017-08-23 18:32:59 -05:00
pins_GEN7_12.h
pins_GEN7_13.h
pins_GEN7_14.h
pins_GEN7_CUSTOM.h Unify AVR90USB: Pins cleanup 2017-06-09 18:48:12 -05:00
pins_GT2560_REV_A_PLUS.h Fix GT2560 A+ servo pins 2017-12-25 02:20:13 -06:00
pins_GT2560_REV_A.h Fix GT2560 A+ servo pins 2017-12-25 02:20:13 -06:00
pins_K8200.h
pins_K8400.h
pins_LEAPFROG.h
pins_MAKEBOARD_MINI.h Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041) 2017-10-21 00:24:22 -05:00
pins_MEGACONTROLLER.h
pins_MEGATRONICS_2.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_MEGATRONICS_3.h Use MB() for Megatronics 3.1 2017-12-08 23:39:47 -06:00
pins_MEGATRONICS.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_MELZI_CREALITY.h Whitespace clean 2017-12-06 16:19:49 -06:00
pins_MELZI_MAKR3D.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_MELZI_MALYAN.h [1.1.x] Fix support for Malyan M150 (#9146) 2018-01-12 01:14:07 -06:00
pins_MELZI.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_MIGHTYBOARD_REVE.h Fix TEMP_BED_PIN for Mightyboard Rev.E 2017-12-07 21:52:43 -06:00
pins_MINIRAMBO.h Board definition and PIN assignments for Mini RAMBo1.0a 2017-12-08 23:41:34 -06:00
pins_MINITRONICS.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_MKS_13.h MKS 1.3+: Add pin mapping for PS_ON 2017-07-21 18:50:05 -05:00
pins_MKS_BASE.h Whitespace cleanup 2018-01-05 10:19:15 -06:00
pins_MKS_GEN_L.h Added MKS GEN L board (#8088) 2017-10-27 02:13:41 -05:00
pins_OMCA_A.h
pins_OMCA.h
pins_PRINTRBOARD_REVF.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_PRINTRBOARD.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_RAMBO.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_RAMPS_13.h
pins_RAMPS_OLD.h
pins_RAMPS_PLUS.h Adding support for using the MKS_12864OLED with the SSD1306 controller 2017-12-16 17:44:34 -06:00
pins_RAMPS.h Adding support for using the MKS_12864OLED with the SSD1306 controller 2017-12-16 17:44:34 -06:00
pins_RIGIDBOARD_V2.h
pins_RIGIDBOARD.h
pins_RUMBA.h
pins_SAINSMART_2IN1.h
pins_SANGUINOLOLU_11.h Creality Ender support. 2018-01-15 03:39:43 -06:00
pins_SANGUINOLOLU_12.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_SAV_MKI.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_SCOOVO_X9H.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_SETHI.h Formatting adjustments 2017-06-15 15:25:24 -05:00
pins_SILVER_GATE.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_STB_11.h Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
pins_TEENSY2.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_TEENSYLU.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_ULTIMAIN_2.h Edit digipot currents via LCD, save to EEPROM 2017-06-25 01:02:36 -05:00
pins_ULTIMAKER_OLD.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_ULTIMAKER.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_ZRIB_V20.h Support for ZRIB v2.0 Control Board 2017-06-02 12:05:46 -05:00
pins.h Creality Ender support. 2018-01-15 03:39:43 -06:00
pinsDebug_list.h [1.1.x] TMC driver update (#8712) 2017-12-15 15:02:39 -06:00
pinsDebug_plus_70.h Support for SilverGate Board 2017-10-31 15:26:27 -05:00
pinsDebug_Teensyduino.h Unify AVR90USB: pinsDebug changes 2017-06-09 19:20:16 -05:00
pinsDebug.h Support for SilverGate Board 2017-10-31 15:26:27 -05:00
planner_bezier.cpp Tweaks to cubic_b_sline code style 2017-11-04 22:00:45 -05:00
planner_bezier.h
planner.cpp Revert "[1.1.x] Fix missing deceleration steps" 2018-01-16 11:31:27 -06:00
planner.h Cleanup spacing, commentary 2018-01-11 18:52:54 -06:00
point_t.h Cleanup Nozzle class, fix XY vs Z move order 2017-11-05 18:14:18 -06:00
printcounter.cpp Patch some serial macros 2017-06-09 17:17:23 -05:00
printcounter.h
SanityCheck.h Updates to TMC support 2018-01-10 04:32:49 -06:00
Sd2Card.cpp Save some program memory 2018-01-13 09:46:54 +01:00
Sd2Card.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdBaseFile.cpp Tweak readDir code 2017-11-26 18:23:34 -06:00
SdBaseFile.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatConfig.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatStructs.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatUtil.cpp Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatUtil.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFile.cpp Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFile.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdInfo.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdVolume.cpp Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdVolume.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
serial.cpp
serial.h Updates to TMC support 2018-01-10 04:32:49 -06:00
servo.cpp Implement SERVO_DELAY as array 2017-08-15 00:28:47 -05:00
servo.h
softspi.h Fix hexadecimal number formatting 2017-08-14 22:50:44 -05:00
speed_lookuptable.h Minimal include for speed_lookuptable 2017-12-05 21:44:59 -06:00
stepper_dac.cpp Apply const to axis args 2017-12-11 00:20:29 -06:00
stepper_dac.h Apply const to axis args 2017-12-11 00:20:29 -06:00
stepper_indirection.cpp Synchronize configs with 2.0.x 2017-12-31 00:02:22 -06:00
stepper_indirection.h [1.1.x] TMC driver update (#8712) 2017-12-15 15:02:39 -06:00
stepper.cpp Revert "[1.1.x] Fix missing deceleration steps" 2018-01-16 11:31:27 -06:00
stepper.h Revert "[Bugfix-1.1.x] initial step correction (#8735)" 2017-12-17 02:04:44 -06:00
stopwatch.cpp
stopwatch.h
temperature.cpp More reliable temperature serial output? 2018-01-15 00:44:55 -06:00
temperature.h Cleanup, commentary of M303 pid tuning code 2018-01-03 20:48:43 -06:00
thermistornames.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_1.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_2.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_3.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_4.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_5.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_6.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_7.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_8.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_9.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_10.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_11.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_12.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_13.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_20.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_51.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_52.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_55.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_60.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_66.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_70.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_71.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_75.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_110.h
thermistortable_147.h
thermistortable_998.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_999.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_1010.h
thermistortable_1047.h
thermistortables.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
tmc_util.cpp Updates to TMC support 2018-01-10 04:32:49 -06:00
tmc_util.h Updates to TMC support 2018-01-10 04:32:49 -06:00
twibus.cpp Patch some serial macros 2017-06-09 17:17:23 -05:00
twibus.h Clean up some trailing spaces 2017-07-01 22:32:20 -05:00
types.h Make G26 work with all mesh leveling. 2017-11-23 21:41:27 -06:00
ubl_G29.cpp PronterFace M105 work around (#9227) 2018-01-17 22:51:19 -06:00
ubl_motion.cpp Comment return false in motion functions 2017-12-24 22:56:56 -06:00
ubl.cpp UBL devel debugging flag 2017-12-11 00:20:29 -06:00
ubl.h PronterFace M105 work around (#9227) 2018-01-17 22:51:19 -06:00
ultralcd_impl_DOGM.h Fix duration when time is exactly 86400s 2018-01-16 08:16:42 +00:00
ultralcd_impl_HD44780.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
ultralcd_st7565_u8glib_VIKI.h Support for SilverGate Board 2017-10-31 15:26:27 -05:00
ultralcd_st7920_u8glib_rrd.h Support for SilverGate Board 2017-10-31 15:26:27 -05:00
ultralcd.cpp Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213) 2018-01-17 00:27:50 -06:00
ultralcd.h Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213) 2018-01-17 00:27:50 -06:00
utf_mapper.h Tweak spacing in utf8_mapper.h 2017-10-06 15:11:27 -05:00
utility.cpp convert DAC percent to uint8_t 2017-06-19 17:46:41 -05:00
utility.h Updates for G33-LCD interface 2017-07-07 05:00:59 -05:00
vector_3.cpp Add a struct defining EEPROM storage 2018-01-05 15:47:51 -06:00
vector_3.h Add a struct defining EEPROM storage 2018-01-05 15:47:51 -06:00
Version.h Encourage users to re-examine their configs 2017-10-24 18:33:31 -05:00
watchdog.cpp Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR 2017-11-03 04:45:13 +01:00
watchdog.h