Firmware/Marlin/example_configurations/wt150
Scott Lahteine e37a1ded0d Increase BABYSTEP_MULTIPLICATOR to 100
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
2017-09-27 00:14:26 -05:00
..
Configuration_adv.h Increase BABYSTEP_MULTIPLICATOR to 100 2017-09-27 00:14:26 -05:00
Configuration.h Update links to old wiki page 2017-09-23 22:06:45 -05:00