Firmware/Marlin/dogm_lcd_implementation.h

607 lines
21 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* dogm_lcd_implementation.h
*
* Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
* Demonstrator: http://www.reprap.org/wiki/STB_Electronics
* License: http://opensource.org/licenses/BSD-3-Clause
*
* With the use of:
* u8glib by Oliver Kraus
* https://github.com/olikraus/U8glib_Arduino
* License: http://opensource.org/licenses/BSD-3-Clause
*/
#ifndef DOGM_LCD_IMPLEMENTATION_H
#define DOGM_LCD_IMPLEMENTATION_H
/**
* Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays.
*/
#if ENABLED(ULTIPANEL)
#define BLEN_A 0
#define BLEN_B 1
#define BLEN_C 2
#define EN_A (_BV(BLEN_A))
#define EN_B (_BV(BLEN_B))
#define EN_C (_BV(BLEN_C))
#define LCD_CLICKED (buttons&EN_C)
#endif
#include <U8glib.h>
#include "dogm_bitmaps.h"
#include "ultralcd.h"
#include "ultralcd_st7920_u8glib_rrd.h"
#include "Configuration.h"
#if DISABLED(MAPPER_C2C3) && DISABLED(MAPPER_NON) && ENABLED(USE_BIG_EDIT_FONT)
#undef USE_BIG_EDIT_FONT
#endif
#if ENABLED(USE_SMALL_INFOFONT)
#include "dogm_font_data_6x9_marlin.h"
#define FONT_STATUSMENU_NAME u8g_font_6x9
#else
#define FONT_STATUSMENU_NAME FONT_MENU_NAME
#endif
#include "dogm_font_data_Marlin_symbols.h" // The Marlin special symbols
#define FONT_SPECIAL_NAME Marlin_symbols
#if DISABLED(SIMULATE_ROMFONT)
#if ENABLED(DISPLAY_CHARSET_ISO10646_1)
#include "dogm_font_data_ISO10646_1.h"
#define FONT_MENU_NAME ISO10646_1_5x7
#elif ENABLED(DISPLAY_CHARSET_ISO10646_5)
#include "dogm_font_data_ISO10646_5_Cyrillic.h"
#define FONT_MENU_NAME ISO10646_5_Cyrillic_5x7
#elif ENABLED(DISPLAY_CHARSET_ISO10646_KANA)
#include "dogm_font_data_ISO10646_Kana.h"
#define FONT_MENU_NAME ISO10646_Kana_5x7
#elif ENABLED(DISPLAY_CHARSET_ISO10646_CN)
#include "dogm_font_data_ISO10646_CN.h"
#define FONT_MENU_NAME ISO10646_CN
#define TALL_FONT_CORRECTION 1
#else // fall-back
#include "dogm_font_data_ISO10646_1.h"
#define FONT_MENU_NAME ISO10646_1_5x7
#endif
#else // SIMULATE_ROMFONT
#if ENABLED(DISPLAY_CHARSET_HD44780_JAPAN)
#include "dogm_font_data_HD44780_J.h"
#define FONT_MENU_NAME HD44780_J_5x7
#elif ENABLED(DISPLAY_CHARSET_HD44780_WESTERN)
#include "dogm_font_data_HD44780_W.h"
#define FONT_MENU_NAME HD44780_W_5x7
#elif ENABLED(DISPLAY_CHARSET_HD44780_CYRILLIC)
#include "dogm_font_data_HD44780_C.h"
#define FONT_MENU_NAME HD44780_C_5x7
#else // fall-back
#include "dogm_font_data_ISO10646_1.h"
#define FONT_MENU_NAME ISO10646_1_5x7
#endif
#endif // SIMULATE_ROMFONT
//#define FONT_STATUSMENU_NAME FONT_MENU_NAME
#define FONT_STATUSMENU 1
#define FONT_SPECIAL 2
#define FONT_MENU_EDIT 3
#define FONT_MENU 4
// DOGM parameters (size in pixels)
#define DOG_CHAR_WIDTH 6
#define DOG_CHAR_HEIGHT 12
#if ENABLED(USE_BIG_EDIT_FONT)
#define FONT_MENU_EDIT_NAME u8g_font_9x18
#define DOG_CHAR_WIDTH_EDIT 9
#define DOG_CHAR_HEIGHT_EDIT 18
#define LCD_WIDTH_EDIT 14
#else
#define FONT_MENU_EDIT_NAME FONT_MENU_NAME
#define DOG_CHAR_WIDTH_EDIT 6
#define DOG_CHAR_HEIGHT_EDIT 12
#define LCD_WIDTH_EDIT 22
#endif
#ifndef TALL_FONT_CORRECTION
#define TALL_FONT_CORRECTION 0
#endif
#define START_ROW 0
// LCD selection
#if ENABLED(U8GLIB_ST7920)
//U8GLIB_ST7920_128X64_RRD u8g(0,0,0);
U8GLIB_ST7920_128X64_RRD u8g(0);
#elif ENABLED(MAKRPANEL)
// The MaKrPanel display, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#elif ENABLED(VIKI2) || ENABLED(miniVIKI)
// Mini Viki and Viki 2.0 LCD, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#elif ENABLED(U8GLIB_LM6059_AF)
// Based on the Adafruit ST7565 (http://www.adafruit.com/products/250)
U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0);
#elif ENABLED(U8GLIB_SSD1306)
// Generic support for SSD1306 OLED I2C LCDs
U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);
#elif ENABLED(MINIPANEL)
// The MINIPanel display
U8GLIB_MINI12864 u8g(DOGLCD_CS, DOGLCD_A0);
#else
// for regular DOGM128 display with HW-SPI
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
#endif
#ifndef LCD_PIXEL_WIDTH
#define LCD_PIXEL_WIDTH 128
#endif
#ifndef LCD_PIXEL_HEIGHT
#define LCD_PIXEL_HEIGHT 64
#endif
#include "utf_mapper.h"
int lcd_contrast;
static char currentfont = 0;
static void lcd_setFont(char font_nr) {
switch(font_nr) {
case FONT_STATUSMENU : {u8g.setFont(FONT_STATUSMENU_NAME); currentfont = FONT_STATUSMENU;}; break;
case FONT_MENU : {u8g.setFont(FONT_MENU_NAME); currentfont = FONT_MENU;}; break;
case FONT_SPECIAL : {u8g.setFont(FONT_SPECIAL_NAME); currentfont = FONT_SPECIAL;}; break;
case FONT_MENU_EDIT : {u8g.setFont(FONT_MENU_EDIT_NAME); currentfont = FONT_MENU_EDIT;}; break;
break;
}
}
char lcd_print(char c) {
if ((c > 0) && (c <= LCD_STR_SPECIAL_MAX)) {
u8g.setFont(FONT_SPECIAL_NAME);
u8g.print(c);
lcd_setFont(currentfont);
return 1;
} else {
return charset_mapper(c);
}
}
char lcd_print(const char* str) {
char c;
int i = 0;
char n = 0;
while ((c = str[i++])) {
n += lcd_print(c);
}
return n;
}
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
char lcd_printPGM(const char* str) {
char c;
char n = 0;
while ((c = pgm_read_byte(str++))) {
n += lcd_print(c);
}
return n;
}
#if ENABLED(SHOW_BOOTSCREEN)
static bool show_bootscreen = true;
#endif
/* Warning: This function is called from interrupt context */
static void lcd_implementation_init() {
#if defined(LCD_PIN_BL) && LCD_PIN_BL > -1 // Enable LCD backlight
pinMode(LCD_PIN_BL, OUTPUT);
digitalWrite(LCD_PIN_BL, HIGH);
#endif
#if defined(LCD_PIN_RESET) && LCD_PIN_RESET > -1
pinMode(LCD_PIN_RESET, OUTPUT);
digitalWrite(LCD_PIN_RESET, HIGH);
#endif
#if DISABLED(MINIPANEL) // setContrast not working for Mini Panel
u8g.setContrast(lcd_contrast);
#endif
// FIXME: remove this workaround
// Uncomment this if you have the first generation (V1.10) of STBs board
// pinMode(17, OUTPUT); // Enable LCD backlight
// digitalWrite(17, HIGH);
#if ENABLED(LCD_SCREEN_ROT_90)
u8g.setRot90(); // Rotate screen by 90°
#elif ENABLED(LCD_SCREEN_ROT_180)
u8g.setRot180(); // Rotate screen by 180°
#elif ENABLED(LCD_SCREEN_ROT_270)
u8g.setRot270(); // Rotate screen by 270°
#endif
#if ENABLED(SHOW_BOOTSCREEN)
int offx = (u8g.getWidth() - (START_BMPWIDTH)) / 2;
#if ENABLED(START_BMPHIGH)
int offy = 0;
#else
int offy = DOG_CHAR_HEIGHT;
#endif
int txt1X = (u8g.getWidth() - (sizeof(STRING_SPLASH_LINE1) - 1) * (DOG_CHAR_WIDTH)) / 2;
u8g.firstPage();
do {
if (show_bootscreen) {
u8g.drawBitmapP(offx, offy, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
lcd_setFont(FONT_MENU);
#ifndef STRING_SPLASH_LINE2
u8g.drawStr(txt1X, u8g.getHeight() - (DOG_CHAR_HEIGHT), STRING_SPLASH_LINE1);
#else
int txt2X = (u8g.getWidth() - (sizeof(STRING_SPLASH_LINE2) - 1) * (DOG_CHAR_WIDTH)) / 2;
u8g.drawStr(txt1X, u8g.getHeight() - (DOG_CHAR_HEIGHT) * 3 / 2, STRING_SPLASH_LINE1);
u8g.drawStr(txt2X, u8g.getHeight() - (DOG_CHAR_HEIGHT) * 1 / 2, STRING_SPLASH_LINE2);
#endif
}
} while (u8g.nextPage());
if (show_bootscreen) {
delay(1000);
show_bootscreen = false;
}
#endif
}
static void lcd_implementation_clear() { } // Automatically cleared by Picture Loop
static void _draw_heater_status(int x, int heater) {
bool isBed = heater < 0;
int y = 17 + (isBed ? 1 : 0);
lcd_setFont(FONT_STATUSMENU);
u8g.setPrintPos(x, 7);
lcd_print(itostr3(int((heater >= 0 ? degTargetHotend(heater) : degTargetBed()) + 0.5)));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
u8g.setPrintPos(x, 28);
lcd_print(itostr3(int(heater >= 0 ? degHotend(heater) : degBed()) + 0.5));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (heater >= 0 ? !isHeatingHotend(heater) : !isHeatingBed()) {
u8g.drawBox(x+7,y,2,2);
}
else {
u8g.setColorIndex(0); // white on black
u8g.drawBox(x + 7, y, 2, 2);
u8g.setColorIndex(1); // black on white
}
}
static void lcd_implementation_status_screen() {
u8g.setColorIndex(1); // black on white
bool blink = lcd_blink();
// Symbols menu graphics, animated fan
u8g.drawBitmapP(9, 1, STATUS_SCREENBYTEWIDTH, STATUS_SCREENHEIGHT,
#if HAS_FAN0
blink && fanSpeeds[0] ? status_screen0_bmp : status_screen1_bmp
#else
status_screen0_bmp
#endif
);
#if ENABLED(SDSUPPORT)
// SD Card Symbol
u8g.drawBox(42, 42 - (TALL_FONT_CORRECTION), 8, 7);
u8g.drawBox(50, 44 - (TALL_FONT_CORRECTION), 2, 5);
u8g.drawFrame(42, 49 - (TALL_FONT_CORRECTION), 10, 4);
u8g.drawPixel(50, 43 - (TALL_FONT_CORRECTION));
// Progress bar frame
u8g.drawFrame(54, 49, 73, 4 - (TALL_FONT_CORRECTION));
// SD Card Progress bar and clock
lcd_setFont(FONT_STATUSMENU);
if (IS_SD_PRINTING) {
// Progress bar solid part
u8g.drawBox(55, 50, (unsigned int)(71.f * card.percentDone() / 100.f), 2 - (TALL_FONT_CORRECTION));
}
u8g.setPrintPos(80,48);
uint16_t time = print_job_timer.duration() / 60;
if (time != 0) {
lcd_print(itostr2(time/60));
lcd_print(':');
lcd_print(itostr2(time%60));
}
else {
lcd_printPGM(PSTR("--:--"));
}
#endif
// Extruders
for (int i = 0; i < EXTRUDERS; i++) _draw_heater_status(6 + i * 25, i);
// Heatbed
if (EXTRUDERS < 4) _draw_heater_status(81, -1);
// Fan
lcd_setFont(FONT_STATUSMENU);
u8g.setPrintPos(104, 27);
#if HAS_FAN0
int per = ((fanSpeeds[0] + 1) * 100) / 256;
if (per) {
lcd_print(itostr3(per));
lcd_print('%');
}
else
#endif
{
lcd_printPGM(PSTR("---"));
}
// X, Y, Z-Coordinates
// Before homing the axis letters are blinking 'X' <-> '?'.
// When axis is homed but axis_known_position is false the axis letters are blinking 'X' <-> ' '.
// When everything is ok you see a constant 'X'.
#define XYZ_BASELINE 38
lcd_setFont(FONT_STATUSMENU);
#if ENABLED(USE_SMALL_INFOFONT)
u8g.drawBox(0, 30, LCD_PIXEL_WIDTH, 10);
#else
u8g.drawBox(0, 30, LCD_PIXEL_WIDTH, 9);
#endif
u8g.setColorIndex(0); // white on black
u8g.setPrintPos(2, XYZ_BASELINE);
if (blink)
lcd_printPGM(PSTR(MSG_X));
else {
if (!axis_homed[X_AXIS])
lcd_printPGM(PSTR("?"));
else {
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
if (!axis_known_position[X_AXIS])
lcd_printPGM(PSTR(" "));
else
#endif
lcd_printPGM(PSTR(MSG_X));
}
}
u8g.drawPixel(8, XYZ_BASELINE - 5);
u8g.drawPixel(8, XYZ_BASELINE - 3);
u8g.setPrintPos(10, XYZ_BASELINE);
lcd_print(ftostr31ns(current_position[X_AXIS]));
u8g.setPrintPos(43, XYZ_BASELINE);
if (blink)
lcd_printPGM(PSTR(MSG_Y));
else {
if (!axis_homed[Y_AXIS])
lcd_printPGM(PSTR("?"));
else {
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
if (!axis_known_position[Y_AXIS])
lcd_printPGM(PSTR(" "));
else
#endif
lcd_printPGM(PSTR(MSG_Y));
}
}
u8g.drawPixel(49, XYZ_BASELINE - 5);
u8g.drawPixel(49, XYZ_BASELINE - 3);
u8g.setPrintPos(51, XYZ_BASELINE);
lcd_print(ftostr31ns(current_position[Y_AXIS]));
u8g.setPrintPos(83, XYZ_BASELINE);
if (blink)
lcd_printPGM(PSTR(MSG_Z));
else {
if (!axis_homed[Z_AXIS])
lcd_printPGM(PSTR("?"));
else {
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
if (!axis_known_position[Z_AXIS])
lcd_printPGM(PSTR(" "));
else
#endif
lcd_printPGM(PSTR(MSG_Z));
}
}
u8g.drawPixel(89, XYZ_BASELINE - 5);
u8g.drawPixel(89, XYZ_BASELINE - 3);
u8g.setPrintPos(91, XYZ_BASELINE);
lcd_print(ftostr32sp(current_position[Z_AXIS]));
u8g.setColorIndex(1); // black on white
// Feedrate
lcd_setFont(FONT_MENU);
u8g.setPrintPos(3, 49);
lcd_print(LCD_STR_FEEDRATE[0]);
lcd_setFont(FONT_STATUSMENU);
u8g.setPrintPos(12, 49);
lcd_print(itostr3(feedrate_multiplier));
lcd_print('%');
// Status line
lcd_setFont(FONT_STATUSMENU);
#if ENABLED(USE_SMALL_INFOFONT)
u8g.setPrintPos(0, 62);
#else
u8g.setPrintPos(0, 63);
#endif
#if DISABLED(FILAMENT_LCD_DISPLAY)
lcd_print(lcd_status_message);
#else
if (millis() < previous_lcd_status_ms + 5000) { //Display both Status message line and Filament display on the last line
lcd_print(lcd_status_message);
}
else {
lcd_printPGM(PSTR("dia:"));
lcd_print(ftostr12ns(filament_width_meas));
lcd_printPGM(PSTR(" factor:"));
lcd_print(itostr3(100.0 * volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]));
lcd_print('%');
}
#endif
}
static void lcd_implementation_mark_as_selected(uint8_t row, bool isSelected) {
if (isSelected) {
u8g.setColorIndex(1); // black on white
u8g.drawBox(0, row * (DOG_CHAR_HEIGHT) + 3 - (TALL_FONT_CORRECTION), LCD_PIXEL_WIDTH, DOG_CHAR_HEIGHT);
u8g.setColorIndex(0); // following text must be white on black
}
else {
u8g.setColorIndex(1); // unmarked text is black on white
}
u8g.setPrintPos((START_ROW) * (DOG_CHAR_WIDTH), (row + 1) * (DOG_CHAR_HEIGHT));
}
static void lcd_implementation_drawmenu_generic(bool isSelected, uint8_t row, const char* pstr, char pre_char, char post_char) {
char c;
uint8_t n = LCD_WIDTH - 2;
lcd_implementation_mark_as_selected(row, isSelected);
while (c = pgm_read_byte(pstr)) {
n -= lcd_print(c);
pstr++;
}
while (n--) lcd_print(' ');
u8g.setPrintPos(LCD_PIXEL_WIDTH - (DOG_CHAR_WIDTH), (row + 1) * (DOG_CHAR_HEIGHT));
lcd_print(post_char);
lcd_print(' ');
}
static void _drawmenu_setting_edit_generic(bool isSelected, uint8_t row, const char* pstr, const char* data, bool pgm) {
char c;
uint8_t vallen = (pgm ? lcd_strlen_P(data) : (lcd_strlen((char*)data)));
uint8_t n = LCD_WIDTH - 2 - vallen;
lcd_implementation_mark_as_selected(row, isSelected);
while (c = pgm_read_byte(pstr)) {
n -= lcd_print(c);
pstr++;
}
lcd_print(':');
while (n--) lcd_print(' ');
u8g.setPrintPos(LCD_PIXEL_WIDTH - (DOG_CHAR_WIDTH) * vallen, (row + 1) * (DOG_CHAR_HEIGHT));
if (pgm) lcd_printPGM(data); else lcd_print((char*)data);
}
#define lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, false)
#define lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, true)
#define lcd_implementation_drawmenu_setting_edit_int3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float32(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float43(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float52(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float51(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51(*(data)))
#define lcd_implementation_drawmenu_setting_edit_long5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
//Add version for callback functions
#define lcd_implementation_drawmenu_setting_edit_callback_int3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float32(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float43(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float52(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float51(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_long5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
void lcd_implementation_drawedit(const char* pstr, const char* value) {
uint8_t rows = 1;
uint8_t lcd_width = LCD_WIDTH, char_width = DOG_CHAR_WIDTH;
uint8_t vallen = lcd_strlen(value);
#if ENABLED(USE_BIG_EDIT_FONT)
if (lcd_strlen_P(pstr) <= LCD_WIDTH_EDIT - 1) {
lcd_setFont(FONT_MENU_EDIT);
lcd_width = LCD_WIDTH_EDIT + 1;
char_width = DOG_CHAR_WIDTH_EDIT;
if (lcd_strlen_P(pstr) >= LCD_WIDTH_EDIT - vallen) rows = 2;
}
else {
lcd_setFont(FONT_MENU);
}
#endif
if (lcd_strlen_P(pstr) > LCD_WIDTH - 2 - vallen) rows = 2;
const float kHalfChar = (DOG_CHAR_HEIGHT_EDIT) / 2;
float rowHeight = u8g.getHeight() / (rows + 1); // 1/(rows+1) = 1/2 or 1/3
u8g.setPrintPos(0, rowHeight + kHalfChar);
lcd_printPGM(pstr);
if (value != NULL) {
lcd_print(':');
u8g.setPrintPos((lcd_width - 1 - vallen) * char_width, rows * rowHeight + kHalfChar);
lcd_print(value);
}
}
#if ENABLED(SDSUPPORT)
static void _drawmenu_sd(bool isSelected, uint8_t row, const char* pstr, const char* filename, char* const longFilename, bool isDir) {
char c;
uint8_t n = LCD_WIDTH - 1;
if (longFilename[0]) {
filename = longFilename;
longFilename[n] = '\0';
}
lcd_implementation_mark_as_selected(row, isSelected);
if (isDir) lcd_print(LCD_STR_FOLDER[0]);
while ((c = *filename)) {
n -= lcd_print(c);
filename++;
}
while (n--) lcd_print(' ');
}
#define lcd_implementation_drawmenu_sdfile(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, false)
#define lcd_implementation_drawmenu_sddirectory(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, true)
#endif //SDSUPPORT
#define lcd_implementation_drawmenu_back(sel, row, pstr) lcd_implementation_drawmenu_generic(sel, row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
#define lcd_implementation_drawmenu_submenu(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
#define lcd_implementation_drawmenu_gcode(sel, row, pstr, gcode) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_function(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
#endif //__DOGM_LCD_IMPLEMENTATION_H