![Blair Thompson](/assets/img/avatar_default.png)
Instead of adding a momentary switch to fake the insertion of the card I have modified the ultralcd menu item: Card Menu -> Refresh to reinitialise the card providing that the SDCARDDETECT pin has been set to -1 in the pins.h file. This requires one less switch on the front panel and the refresh menu item is in the most relevent place for a user who wishes to inert a card and then print from it. It also means that the "Card inserted" messages do not bother the users of these card readers (they dont make sense for users without SCCARDDETECT)
2260 lines
54 KiB
Plaintext
2260 lines
54 KiB
Plaintext
#include "ultralcd.h"
|
|
#ifdef ULTRA_LCD
|
|
#include "Marlin.h"
|
|
#include <LiquidCrystal.h>
|
|
//===========================================================================
|
|
//=============================imported variables============================
|
|
//===========================================================================
|
|
|
|
extern volatile int feedmultiply;
|
|
extern volatile bool feedmultiplychanged;
|
|
|
|
extern volatile int extrudemultiply;
|
|
|
|
extern long position[4];
|
|
extern CardReader card;
|
|
|
|
//===========================================================================
|
|
//=============================public variables============================
|
|
//===========================================================================
|
|
volatile char buttons=0; //the last checked buttons in a bit array.
|
|
int encoderpos=0;
|
|
short lastenc=0;
|
|
|
|
|
|
//===========================================================================
|
|
//=============================private variables============================
|
|
//===========================================================================
|
|
static char messagetext[LCD_WIDTH]="";
|
|
|
|
//return for string conversion routines
|
|
static char conv[8];
|
|
|
|
LiquidCrystal lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
|
|
|
static unsigned long previous_millis_lcd=0;
|
|
//static long previous_millis_buttons=0;
|
|
|
|
|
|
#ifdef NEWPANEL
|
|
static long blocking=0;
|
|
#else
|
|
static long blocking[8]={0,0,0,0,0,0,0,0};
|
|
#endif
|
|
|
|
static MainMenu menu;
|
|
|
|
|
|
void lcdProgMemprint(const char *str)
|
|
{
|
|
char ch=pgm_read_byte(str);
|
|
while(ch)
|
|
{
|
|
lcd.print(ch);
|
|
ch=pgm_read_byte(++str);
|
|
}
|
|
}
|
|
#define lcdprintPGM(x) lcdProgMemprint(MYPGM(x))
|
|
|
|
|
|
//===========================================================================
|
|
//=============================functions ============================
|
|
//===========================================================================
|
|
|
|
int intround(const float &x){return int(0.5+x);}
|
|
|
|
void lcd_status(const char* message)
|
|
{
|
|
strncpy(messagetext,message,LCD_WIDTH);
|
|
messagetext[strlen(message)]=0;
|
|
}
|
|
|
|
void lcd_statuspgm(const char* message)
|
|
{
|
|
char ch=pgm_read_byte(message);
|
|
char *target=messagetext;
|
|
uint8_t cnt=0;
|
|
while(ch &&cnt<LCD_WIDTH)
|
|
{
|
|
*target=ch;
|
|
target++;
|
|
cnt++;
|
|
ch=pgm_read_byte(++message);
|
|
}
|
|
*target=0;
|
|
}
|
|
|
|
FORCE_INLINE void clear()
|
|
{
|
|
lcd.clear();
|
|
}
|
|
|
|
|
|
void lcd_init()
|
|
{
|
|
//beep();
|
|
byte Degree[8] =
|
|
{
|
|
B01100,
|
|
B10010,
|
|
B10010,
|
|
B01100,
|
|
B00000,
|
|
B00000,
|
|
B00000,
|
|
B00000
|
|
};
|
|
byte Thermometer[8] =
|
|
{
|
|
B00100,
|
|
B01010,
|
|
B01010,
|
|
B01010,
|
|
B01010,
|
|
B10001,
|
|
B10001,
|
|
B01110
|
|
};
|
|
byte uplevel[8]={0x04, 0x0e, 0x1f, 0x04, 0x1c, 0x00, 0x00, 0x00};//thanks joris
|
|
byte refresh[8]={0x00, 0x06, 0x19, 0x18, 0x03, 0x13, 0x0c, 0x00}; //thanks joris
|
|
byte folder [8]={0x00, 0x1c, 0x1f, 0x11, 0x11, 0x1f, 0x00, 0x00}; //thanks joris
|
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
|
lcd.createChar(1,Degree);
|
|
lcd.createChar(2,Thermometer);
|
|
lcd.createChar(3,uplevel);
|
|
lcd.createChar(4,refresh);
|
|
lcd.createChar(5,folder);
|
|
LCD_MESSAGEPGM(WELCOME_MSG);
|
|
}
|
|
|
|
|
|
void beep()
|
|
{
|
|
//return;
|
|
#ifdef ULTIPANEL
|
|
#if (BEEPER > -1)
|
|
{
|
|
pinMode(BEEPER,OUTPUT);
|
|
for(int8_t i=0;i<20;i++){
|
|
WRITE(BEEPER,HIGH);
|
|
delay(5);
|
|
WRITE(BEEPER,LOW);
|
|
delay(5);
|
|
}
|
|
}
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
void beepshort()
|
|
{
|
|
//return;
|
|
#ifdef ULTIPANEL
|
|
#if (BEEPER > -1)
|
|
{
|
|
pinMode(BEEPER,OUTPUT);
|
|
for(int8_t i=0;i<10;i++){
|
|
WRITE(BEEPER,HIGH);
|
|
delay(3);
|
|
WRITE(BEEPER,LOW);
|
|
delay(3);
|
|
}
|
|
}
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
void lcd_status()
|
|
{
|
|
#ifdef ULTIPANEL
|
|
static uint8_t oldbuttons=0;
|
|
//static long previous_millis_buttons=0;
|
|
//static long previous_lcdinit=0;
|
|
// buttons_check(); // Done in temperature interrupt
|
|
//previous_millis_buttons=millis();
|
|
long ms=millis();
|
|
for(int8_t i=0; i<8; i++) {
|
|
#ifndef NEWPANEL
|
|
if((blocking[i]>ms))
|
|
buttons &= ~(1<<i);
|
|
#else
|
|
if((blocking>ms))
|
|
buttons &= ~(1<<i);
|
|
#endif
|
|
}
|
|
if((buttons==oldbuttons) && ((millis() - previous_millis_lcd) < LCD_UPDATE_INTERVAL) )
|
|
return;
|
|
oldbuttons=buttons;
|
|
#else
|
|
|
|
if(((millis() - previous_millis_lcd) < LCD_UPDATE_INTERVAL) )
|
|
return;
|
|
#endif
|
|
|
|
previous_millis_lcd=millis();
|
|
menu.update();
|
|
}
|
|
#ifdef ULTIPANEL
|
|
|
|
|
|
void buttons_init()
|
|
{
|
|
#ifdef NEWPANEL
|
|
pinMode(BTN_EN1,INPUT);
|
|
pinMode(BTN_EN2,INPUT);
|
|
pinMode(BTN_ENC,INPUT);
|
|
pinMode(SDCARDDETECT,INPUT);
|
|
WRITE(BTN_EN1,HIGH);
|
|
WRITE(BTN_EN2,HIGH);
|
|
WRITE(BTN_ENC,HIGH);
|
|
#if (SDCARDDETECT > -1)
|
|
{
|
|
WRITE(SDCARDDETECT,HIGH);
|
|
}
|
|
#endif
|
|
#else
|
|
pinMode(SHIFT_CLK,OUTPUT);
|
|
pinMode(SHIFT_LD,OUTPUT);
|
|
pinMode(SHIFT_EN,OUTPUT);
|
|
pinMode(SHIFT_OUT,INPUT);
|
|
WRITE(SHIFT_OUT,HIGH);
|
|
WRITE(SHIFT_LD,HIGH);
|
|
WRITE(SHIFT_EN,LOW);
|
|
#endif
|
|
}
|
|
|
|
|
|
void buttons_check()
|
|
{
|
|
|
|
#ifdef NEWPANEL
|
|
uint8_t newbutton=0;
|
|
if(READ(BTN_EN1)==0) newbutton|=EN_A;
|
|
if(READ(BTN_EN2)==0) newbutton|=EN_B;
|
|
if((blocking<millis()) &&(READ(BTN_ENC)==0))
|
|
newbutton|=EN_C;
|
|
buttons=newbutton;
|
|
#else //read it from the shift register
|
|
uint8_t newbutton=0;
|
|
WRITE(SHIFT_LD,LOW);
|
|
WRITE(SHIFT_LD,HIGH);
|
|
unsigned char tmp_buttons=0;
|
|
for(int8_t i=0;i<8;i++)
|
|
{
|
|
newbutton = newbutton>>1;
|
|
if(READ(SHIFT_OUT))
|
|
newbutton|=(1<<7);
|
|
WRITE(SHIFT_CLK,HIGH);
|
|
WRITE(SHIFT_CLK,LOW);
|
|
}
|
|
buttons=~newbutton; //invert it, because a pressed switch produces a logical 0
|
|
#endif
|
|
|
|
//manage encoder rotation
|
|
char enc=0;
|
|
if(buttons&EN_A)
|
|
enc|=(1<<0);
|
|
if(buttons&EN_B)
|
|
enc|=(1<<1);
|
|
if(enc!=lastenc)
|
|
{
|
|
switch(enc)
|
|
{
|
|
case encrot0:
|
|
if(lastenc==encrot3)
|
|
encoderpos++;
|
|
else if(lastenc==encrot1)
|
|
encoderpos--;
|
|
break;
|
|
case encrot1:
|
|
if(lastenc==encrot0)
|
|
encoderpos++;
|
|
else if(lastenc==encrot2)
|
|
encoderpos--;
|
|
break;
|
|
case encrot2:
|
|
if(lastenc==encrot1)
|
|
encoderpos++;
|
|
else if(lastenc==encrot3)
|
|
encoderpos--;
|
|
break;
|
|
case encrot3:
|
|
if(lastenc==encrot2)
|
|
encoderpos++;
|
|
else if(lastenc==encrot0)
|
|
encoderpos--;
|
|
break;
|
|
default:
|
|
;
|
|
}
|
|
}
|
|
lastenc=enc;
|
|
}
|
|
|
|
#endif
|
|
|
|
MainMenu::MainMenu()
|
|
{
|
|
status=Main_Status;
|
|
displayStartingRow=0;
|
|
activeline=0;
|
|
force_lcd_update=true;
|
|
#ifdef ULTIPANEL
|
|
buttons_init();
|
|
#endif
|
|
lcd_init();
|
|
linechanging=false;
|
|
tune=false;
|
|
}
|
|
|
|
void MainMenu::showStatus()
|
|
{
|
|
#if LCD_HEIGHT==4
|
|
static int olddegHotEnd0=-1;
|
|
static int oldtargetHotEnd0=-1;
|
|
//force_lcd_update=true;
|
|
if(force_lcd_update||feedmultiplychanged) //initial display of content
|
|
{
|
|
feedmultiplychanged=false;
|
|
encoderpos=feedmultiply;
|
|
clear();
|
|
lcd.setCursor(0,0);lcdprintPGM("\002123/567\001 ");
|
|
#if defined BED_USES_THERMISTOR || defined BED_USES_AD595
|
|
lcd.setCursor(10,0);lcdprintPGM("B123/567\001 ");
|
|
#endif
|
|
}
|
|
|
|
int tHotEnd0=intround(degHotend0());
|
|
if((abs(tHotEnd0-olddegHotEnd0)>1)||force_lcd_update) //>1 because otherwise the lcd is refreshed to often.
|
|
{
|
|
lcd.setCursor(1,0);
|
|
lcd.print(ftostr3(tHotEnd0));
|
|
olddegHotEnd0=tHotEnd0;
|
|
}
|
|
int ttHotEnd0=intround(degTargetHotend0());
|
|
if((ttHotEnd0!=oldtargetHotEnd0)||force_lcd_update)
|
|
{
|
|
lcd.setCursor(5,0);
|
|
lcd.print(ftostr3(ttHotEnd0));
|
|
oldtargetHotEnd0=ttHotEnd0;
|
|
}
|
|
#if defined BED_USES_THERMISTOR || defined BED_USES_AD595
|
|
static int oldtBed=-1;
|
|
static int oldtargetBed=-1;
|
|
int tBed=intround(degBed());
|
|
if((tBed!=oldtBed)||force_lcd_update)
|
|
{
|
|
lcd.setCursor(11,0);
|
|
lcd.print(ftostr3(tBed));
|
|
oldtBed=tBed;
|
|
}
|
|
int targetBed=intround(degTargetBed());
|
|
if((targetBed!=oldtargetBed)||force_lcd_update)
|
|
{
|
|
lcd.setCursor(15,0);
|
|
lcd.print(ftostr3(targetBed));
|
|
oldtargetBed=targetBed;
|
|
}
|
|
#endif
|
|
//starttime=2;
|
|
static uint16_t oldtime=0;
|
|
if(starttime!=0)
|
|
{
|
|
lcd.setCursor(0,1);
|
|
uint16_t time=millis()/60000-starttime/60000;
|
|
|
|
if(starttime!=oldtime)
|
|
{
|
|
lcd.print(itostr2(time/60));lcdprintPGM("h ");lcd.print(itostr2(time%60));lcdprintPGM("m");
|
|
oldtime=time;
|
|
}
|
|
}
|
|
static int oldzpos=0;
|
|
int currentz=current_position[2]*100;
|
|
if((currentz!=oldzpos)||force_lcd_update)
|
|
{
|
|
lcd.setCursor(10,1);
|
|
lcdprintPGM("Z:");lcd.print(ftostr52(current_position[2]));
|
|
oldzpos=currentz;
|
|
}
|
|
static int oldfeedmultiply=0;
|
|
int curfeedmultiply=feedmultiply;
|
|
if(encoderpos!=curfeedmultiply||force_lcd_update)
|
|
{
|
|
curfeedmultiply=encoderpos;
|
|
if(curfeedmultiply<10)
|
|
curfeedmultiply=10;
|
|
if(curfeedmultiply>999)
|
|
curfeedmultiply=999;
|
|
feedmultiply=curfeedmultiply;
|
|
encoderpos=curfeedmultiply;
|
|
}
|
|
if((curfeedmultiply!=oldfeedmultiply)||force_lcd_update)
|
|
{
|
|
oldfeedmultiply=curfeedmultiply;
|
|
lcd.setCursor(0,2);
|
|
lcd.print(itostr3(curfeedmultiply));lcdprintPGM("% ");
|
|
}
|
|
if(messagetext[0]!='\0')
|
|
{
|
|
lcd.setCursor(0,LCD_HEIGHT-1);
|
|
lcd.print(messagetext);
|
|
uint8_t n=strlen(messagetext);
|
|
for(int8_t i=0;i<LCD_WIDTH-n;i++)
|
|
lcd.print(" ");
|
|
|
|
messagetext[0]='\0';
|
|
}
|
|
|
|
static uint8_t oldpercent=101;
|
|
uint8_t percent=card.percentDone();
|
|
if(oldpercent!=percent ||force_lcd_update)
|
|
{
|
|
lcd.setCursor(7,2);
|
|
lcd.print(itostr3((int)percent));
|
|
lcdprintPGM("%SD");
|
|
}
|
|
|
|
#else //smaller LCDS----------------------------------
|
|
static int olddegHotEnd0=-1;
|
|
static int oldtargetHotEnd0=-1;
|
|
if(force_lcd_update) //initial display of content
|
|
{
|
|
encoderpos=feedmultiply;
|
|
lcd.setCursor(0,0);lcdprintPGM("\002123/567\001 ");
|
|
#if defined BED_USES_THERMISTOR || defined BED_USES_AD595
|
|
lcd.setCursor(10,0);lcdprintPGM("B123/567\001 ");
|
|
#endif
|
|
}
|
|
|
|
int tHotEnd0=intround(degHotend0());
|
|
int ttHotEnd0=intround(degTargetHotend0());
|
|
|
|
|
|
if((abs(tHotEnd0-olddegHotEnd0)>1)||force_lcd_update)
|
|
{
|
|
lcd.setCursor(1,0);
|
|
lcd.print(ftostr3(tHotEnd0));
|
|
olddegHotEnd0=tHotEnd0;
|
|
}
|
|
if((ttHotEnd0!=oldtargetHotEnd0)||force_lcd_update)
|
|
{
|
|
lcd.setCursor(5,0);
|
|
lcd.print(ftostr3(ttHotEnd0));
|
|
oldtargetHotEnd0=ttHotEnd0;
|
|
}
|
|
|
|
if(messagetext[0]!='\0')
|
|
{
|
|
lcd.setCursor(0,LCD_HEIGHT-1);
|
|
lcd.print(messagetext);
|
|
uint8_t n=strlen(messagetext);
|
|
for(int8_t i=0;i<LCD_WIDTH-n;i++)
|
|
lcd.print(" ");
|
|
messagetext[0]='\0';
|
|
}
|
|
|
|
#endif
|
|
force_lcd_update=false;
|
|
}
|
|
|
|
enum {ItemP_exit, ItemP_autostart,ItemP_disstep,ItemP_home, ItemP_origin, ItemP_preheat_pla, ItemP_preheat_abs, ItemP_cooldown,/*ItemP_extrude,*/ItemP_move};
|
|
|
|
//any action must not contain a ',' character anywhere, or this breaks:
|
|
#define MENUITEM(repaint_action, click_action) \
|
|
{\
|
|
if(force_lcd_update) { lcd.setCursor(0,line); repaint_action; } \
|
|
if((activeline==line) && CLICKED) {click_action} \
|
|
}
|
|
|
|
void MainMenu::showPrepare()
|
|
{
|
|
uint8_t line=0;
|
|
clearIfNecessary();
|
|
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
|
|
{
|
|
//Serial.println((int)(line-lineoffset));
|
|
switch(i)
|
|
{
|
|
case ItemP_exit:
|
|
MENUITEM( lcdprintPGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
|
break;
|
|
case ItemP_autostart:
|
|
MENUITEM( lcdprintPGM(MSG_AUTOSTART) , BLOCK;card.lastnr=0;card.setroot();card.checkautostart(true);beepshort(); ) ;
|
|
break;
|
|
case ItemP_disstep:
|
|
MENUITEM( lcdprintPGM(MSG_DISABLE_STEPPERS) , BLOCK;enquecommand("M84");beepshort(); ) ;
|
|
break;
|
|
case ItemP_home:
|
|
MENUITEM( lcdprintPGM(MSG_AUTO_HOME) , BLOCK;enquecommand("G28");beepshort(); ) ;
|
|
break;
|
|
case ItemP_origin:
|
|
MENUITEM( lcdprintPGM(MSG_SET_ORIGIN) , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ;
|
|
break;
|
|
case ItemP_preheat_pla:
|
|
MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA) , BLOCK;setTargetHotend0(PLA_PREHEAT_HOTEND_TEMP);setTargetBed(PLA_PREHEAT_HPB_TEMP);analogWrite(FAN_PIN, PLA_PREHEAT_FAN_SPEED); beepshort(); ) ;
|
|
break;
|
|
case ItemP_preheat_abs:
|
|
MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS) , BLOCK;setTargetHotend0(ABS_PREHEAT_HOTEND_TEMP);setTargetBed(ABS_PREHEAT_HPB_TEMP); analogWrite(FAN_PIN, ABS_PREHEAT_FAN_SPEED); beepshort(); ) ;
|
|
break;
|
|
case ItemP_cooldown:
|
|
MENUITEM( lcdprintPGM(MSG_COOLDOWN) , BLOCK;setTargetHotend0(0);setTargetBed(0);beepshort(); ) ;
|
|
break;
|
|
// case ItemP_extrude:
|
|
// MENUITEM( lcdprintPGM(" Extrude") , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E50");beepshort(); ) ;
|
|
// break;
|
|
case ItemP_move:
|
|
MENUITEM( lcdprintPGM(MSG_MOVE_AXIS) , BLOCK;status=Sub_PrepareMove;beepshort(); );
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
line++;
|
|
}
|
|
updateActiveLines(ItemP_move,encoderpos);
|
|
}
|
|
|
|
enum {
|
|
ItemAM_exit,
|
|
ItemAM_X, ItemAM_Y, ItemAM_Z, ItemAM_E
|
|
};
|
|
|
|
void MainMenu::showAxisMove()
|
|
{
|
|
uint8_t line=0;
|
|
int oldencoderpos=0;
|
|
clearIfNecessary();
|
|
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
|
|
{
|
|
switch(i)
|
|
{
|
|
case ItemAM_exit:
|
|
MENUITEM( lcdprintPGM(MSG_PREPARE_ALT) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
|
break;
|
|
case ItemAM_X:
|
|
{
|
|
//oldencoderpos=0;
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(" X:");
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[X_AXIS]));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
enquecommand("G91");
|
|
}
|
|
else
|
|
{
|
|
enquecommand("G90");
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if (encoderpos >0)
|
|
{
|
|
enquecommand("G1 F700 X0.1");
|
|
oldencoderpos=encoderpos;
|
|
encoderpos=0;
|
|
}
|
|
|
|
else if (encoderpos < 0)
|
|
{
|
|
enquecommand("G1 F700 X-0.1");
|
|
oldencoderpos=encoderpos;
|
|
encoderpos=0;
|
|
}
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[X_AXIS]));
|
|
}
|
|
}
|
|
break;
|
|
case ItemAM_Y:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(" Y:");
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Y_AXIS]));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
enquecommand("G91");
|
|
}
|
|
else
|
|
{
|
|
enquecommand("G90");
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if (encoderpos >0)
|
|
{
|
|
enquecommand("G1 F700 Y0.1");
|
|
oldencoderpos=encoderpos;
|
|
encoderpos=0;
|
|
}
|
|
|
|
else if (encoderpos < 0)
|
|
{
|
|
enquecommand("G1 F700 Y-0.1");
|
|
oldencoderpos=encoderpos;
|
|
encoderpos=0;
|
|
}
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Y_AXIS]));
|
|
}
|
|
}
|
|
break;
|
|
case ItemAM_Z:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(" Z:");
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Z_AXIS]));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
enquecommand("G91");
|
|
}
|
|
else
|
|
{
|
|
enquecommand("G90");
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if (encoderpos >0)
|
|
{
|
|
enquecommand("G1 F170 Z0.1");
|
|
oldencoderpos=encoderpos;
|
|
encoderpos=0;
|
|
}
|
|
|
|
else if (encoderpos < 0)
|
|
{
|
|
enquecommand("G1 F1700 Z-0.1");
|
|
oldencoderpos=encoderpos;
|
|
encoderpos=0;
|
|
}
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Z_AXIS]));
|
|
}
|
|
}
|
|
break;
|
|
case ItemAM_E:
|
|
MENUITEM( lcdprintPGM(MSG_EXTRUDE) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E5");beepshort(); ) ;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
line++;
|
|
}
|
|
updateActiveLines(ItemAM_E,encoderpos);
|
|
}
|
|
|
|
enum {ItemT_exit,ItemT_speed,ItemT_flow,ItemT_nozzle,
|
|
#if (HEATER_BED_PIN > -1)
|
|
ItemT_bed,
|
|
#endif
|
|
ItemT_fan};
|
|
|
|
void MainMenu::showTune()
|
|
{
|
|
uint8_t line=0;
|
|
clearIfNecessary();
|
|
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
|
|
{
|
|
//Serial.println((int)(line-lineoffset));
|
|
switch(i)
|
|
{
|
|
case ItemT_exit:
|
|
MENUITEM( lcdprintPGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
|
break;
|
|
case ItemT_speed:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_SPEED);
|
|
lcd.setCursor(13,line);lcd.print(ftostr3(feedmultiply));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED) //AnalogWrite(FAN_PIN, fanpwm);
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=feedmultiply;
|
|
}
|
|
else
|
|
{
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<1) encoderpos=1;
|
|
if(encoderpos>400) encoderpos=400;
|
|
feedmultiply = encoderpos;
|
|
feedmultiplychanged=true;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
case ItemT_nozzle:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
|
|
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0())));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=intround(degTargetHotend0());
|
|
}
|
|
else
|
|
{
|
|
setTargetHotend0(encoderpos);
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>260) encoderpos=260;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
}break;
|
|
#if (HEATER_BED_PIN > -1)
|
|
case ItemT_bed:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
|
|
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetBed())));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=intround(degTargetBed());
|
|
}
|
|
else
|
|
{
|
|
setTargetBed(encoderpos);
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>260) encoderpos=260;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
}break;
|
|
#endif
|
|
|
|
|
|
case ItemT_fan:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
|
|
lcd.setCursor(13,line);lcd.print(ftostr3(fanpwm));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED) //nalogWrite(FAN_PIN, fanpwm);
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=fanpwm;
|
|
}
|
|
else
|
|
{
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>255) encoderpos=255;
|
|
fanpwm=encoderpos;
|
|
analogWrite(FAN_PIN, fanpwm);
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
case ItemT_flow://axis_steps_per_unit[i] = code_value();
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_FLOW);
|
|
lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[3]));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)axis_steps_per_unit[3];
|
|
}
|
|
else
|
|
{
|
|
float factor=float(encoderpos)/float(axis_steps_per_unit[3]);
|
|
position[E_AXIS]=lround(position[E_AXIS]*factor);
|
|
//current_position[3]*=factor;
|
|
axis_steps_per_unit[E_AXIS]= encoderpos;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<5) encoderpos=5;
|
|
if(encoderpos>9999) encoderpos=9999;
|
|
lcd.setCursor(13,line);lcd.print(itostr4(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
default:
|
|
break;
|
|
}
|
|
line++;
|
|
}
|
|
updateActiveLines(ItemT_fan,encoderpos);
|
|
}
|
|
|
|
//does not work
|
|
// #define MENUCHANGEITEM(repaint_action, enter_action, accept_action, change_action) \
|
|
// {\
|
|
// if(force_lcd_update) { lcd.setCursor(0,line); repaint_action; } \
|
|
// if(activeline==line) \
|
|
// { \
|
|
// if(CLICKED) \
|
|
// { \
|
|
// linechanging=!linechanging; \
|
|
// if(linechanging) {enter_action;} \
|
|
// else {accept_action;} \
|
|
// } \
|
|
// else \
|
|
// if(linechanging) {change_action};}\
|
|
// }
|
|
//
|
|
|
|
enum {
|
|
ItemCT_exit,ItemCT_nozzle,
|
|
#ifdef AUTOTEMP
|
|
ItemCT_autotempactive,
|
|
ItemCT_autotempmin,ItemCT_autotempmax,ItemCT_autotempfact,
|
|
#endif
|
|
#if (HEATER_BED_PIN > -1)
|
|
ItemCT_bed,
|
|
#endif
|
|
ItemCT_fan,
|
|
ItemCT_PID_P,ItemCT_PID_I,ItemCT_PID_D,ItemCT_PID_C
|
|
};
|
|
|
|
void MainMenu::showControlTemp()
|
|
{
|
|
uint8_t line=0;
|
|
clearIfNecessary();
|
|
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
|
|
{
|
|
switch(i)
|
|
{
|
|
case ItemCT_exit:
|
|
MENUITEM( lcdprintPGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
|
|
break;
|
|
case ItemCT_nozzle:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
|
|
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0())));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=intround(degTargetHotend0());
|
|
}
|
|
else
|
|
{
|
|
setTargetHotend0(encoderpos);
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>260) encoderpos=260;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
#ifdef AUTOTEMP
|
|
case ItemCT_autotempmin:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_MIN);
|
|
lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_min));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=intround(autotemp_min);
|
|
}
|
|
else
|
|
{
|
|
autotemp_min=encoderpos;
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>260) encoderpos=260;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
case ItemCT_autotempmax:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_MAX);
|
|
lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_max));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=intround(autotemp_max);
|
|
}
|
|
else
|
|
{
|
|
autotemp_max=encoderpos;
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>260) encoderpos=260;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
case ItemCT_autotempfact:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_FACTOR);
|
|
lcd.setCursor(13,line);lcd.print(ftostr32(autotemp_factor));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=intround(autotemp_factor*100);
|
|
}
|
|
else
|
|
{
|
|
autotemp_max=encoderpos;
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>99) encoderpos=99;
|
|
lcd.setCursor(13,line);lcd.print(ftostr32(encoderpos/100.));
|
|
}
|
|
|
|
}break;
|
|
case ItemCT_autotempactive:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_AUTOTEMP);
|
|
lcd.setCursor(13,line);
|
|
if(autotemp_enabled)
|
|
lcdprintPGM(MSG_ON);
|
|
else
|
|
lcdprintPGM(MSG_OFF);
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
autotemp_enabled=!autotemp_enabled;
|
|
lcd.setCursor(13,line);
|
|
if(autotemp_enabled)
|
|
lcdprintPGM(MSG_ON);
|
|
else
|
|
lcdprintPGM(MSG_OFF);
|
|
BLOCK;
|
|
}
|
|
|
|
}break;
|
|
#endif //autotemp
|
|
#if (HEATER_BED_PIN > -1)
|
|
case ItemCT_bed:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
|
|
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetBed())));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=intround(degTargetBed());
|
|
}
|
|
else
|
|
{
|
|
setTargetBed(encoderpos);
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>260) encoderpos=260;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
}break;
|
|
#endif
|
|
case ItemCT_fan:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
|
|
lcd.setCursor(13,line);lcd.print(ftostr3(fanpwm));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED) //nalogWrite(FAN_PIN, fanpwm);
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=fanpwm;
|
|
}
|
|
else
|
|
{
|
|
encoderpos=activeline*lcdslow;
|
|
beepshort();
|
|
}
|
|
BLOCK;
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>255) encoderpos=255;
|
|
fanpwm=encoderpos;
|
|
analogWrite(FAN_PIN, fanpwm);
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
case ItemCT_PID_P:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(" PID-P: ");
|
|
lcd.setCursor(13,line);lcd.print(itostr4(Kp));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)Kp;
|
|
}
|
|
else
|
|
{
|
|
Kp= encoderpos;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<1) encoderpos=1;
|
|
if(encoderpos>9990) encoderpos=9990;
|
|
lcd.setCursor(13,line);lcd.print(itostr4(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
case ItemCT_PID_I:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_PID_I);
|
|
lcd.setCursor(13,line);lcd.print(ftostr51(Ki/PID_dT));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)(Ki*10/PID_dT);
|
|
}
|
|
else
|
|
{
|
|
Ki= encoderpos/10.*PID_dT;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>9990) encoderpos=9990;
|
|
lcd.setCursor(13,line);lcd.print(ftostr51(encoderpos/10.));
|
|
}
|
|
|
|
}break;
|
|
case ItemCT_PID_D:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_PID_D);
|
|
lcd.setCursor(13,line);lcd.print(itostr4(Kd*PID_dT));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)(Kd/5./PID_dT);
|
|
}
|
|
else
|
|
{
|
|
Kd= encoderpos;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>9990) encoderpos=9990;
|
|
lcd.setCursor(13,line);lcd.print(itostr4(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
case ItemCT_PID_C:
|
|
#ifdef PID_ADD_EXTRUSION_RATE
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_PID_C);
|
|
lcd.setCursor(13,line);lcd.print(itostr3(Kc));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)Kc;
|
|
}
|
|
else
|
|
{
|
|
Kc= encoderpos;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>990) encoderpos=990;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
|
|
}
|
|
#endif
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
line++;
|
|
}
|
|
#ifdef PID_ADD_EXTRUSION_RATE
|
|
updateActiveLines(ItemCT_PID_C,encoderpos);
|
|
#else
|
|
updateActiveLines(ItemCT_PID_D,encoderpos);
|
|
#endif
|
|
}
|
|
|
|
|
|
enum {
|
|
ItemCM_exit,
|
|
ItemCM_acc, ItemCM_xyjerk,
|
|
ItemCM_vmaxx, ItemCM_vmaxy, ItemCM_vmaxz, ItemCM_vmaxe,
|
|
ItemCM_vtravmin,ItemCM_vmin,
|
|
ItemCM_amaxx, ItemCM_amaxy, ItemCM_amaxz, ItemCM_amaxe,
|
|
ItemCM_aret, ItemCM_xsteps,ItemCM_ysteps, ItemCM_zsteps, ItemCM_esteps
|
|
};
|
|
|
|
|
|
|
|
void MainMenu::showControlMotion()
|
|
{
|
|
uint8_t line=0;
|
|
clearIfNecessary();
|
|
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
|
|
{
|
|
switch(i)
|
|
{
|
|
case ItemCM_exit:
|
|
MENUITEM( lcdprintPGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
|
|
break;
|
|
case ItemCM_acc:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_ACC);
|
|
lcd.setCursor(13,line);lcd.print(itostr3(acceleration/100));lcdprintPGM("00");
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)acceleration/100;
|
|
}
|
|
else
|
|
{
|
|
acceleration= encoderpos*100;
|
|
encoderpos=activeline*lcdslow;
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<5) encoderpos=5;
|
|
if(encoderpos>990) encoderpos=990;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00");
|
|
}
|
|
|
|
}break;
|
|
case ItemCM_xyjerk: //max_xy_jerk
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_VXY_JERK);
|
|
lcd.setCursor(13,line);lcd.print(itostr3(max_xy_jerk));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)max_xy_jerk;
|
|
}
|
|
else
|
|
{
|
|
max_xy_jerk= encoderpos;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<1) encoderpos=1;
|
|
if(encoderpos>990) encoderpos=990;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
|
|
case ItemCM_vmaxx:
|
|
case ItemCM_vmaxy:
|
|
case ItemCM_vmaxz:
|
|
case ItemCM_vmaxe:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_VMAX);
|
|
if(i==ItemCM_vmaxx)lcdprintPGM(MSG_X);
|
|
if(i==ItemCM_vmaxy)lcdprintPGM(MSG_Y);
|
|
if(i==ItemCM_vmaxz)lcdprintPGM(MSG_Z);
|
|
if(i==ItemCM_vmaxe)lcdprintPGM(MSG_E);
|
|
lcd.setCursor(13,line);lcd.print(itostr3(max_feedrate[i-ItemCM_vmaxx]));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)max_feedrate[i-ItemCM_vmaxx];
|
|
}
|
|
else
|
|
{
|
|
max_feedrate[i-ItemCM_vmaxx]= encoderpos;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<1) encoderpos=1;
|
|
if(encoderpos>990) encoderpos=990;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
|
|
case ItemCM_vmin:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_VMIN);
|
|
lcd.setCursor(13,line);lcd.print(itostr3(minimumfeedrate));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)(minimumfeedrate);
|
|
}
|
|
else
|
|
{
|
|
minimumfeedrate= encoderpos;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>990) encoderpos=990;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
case ItemCM_vtravmin:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_VTRAV_MIN);
|
|
lcd.setCursor(13,line);lcd.print(itostr3(mintravelfeedrate));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)mintravelfeedrate;
|
|
}
|
|
else
|
|
{
|
|
mintravelfeedrate= encoderpos;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<0) encoderpos=0;
|
|
if(encoderpos>990) encoderpos=990;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
|
|
}
|
|
|
|
}break;
|
|
|
|
case ItemCM_amaxx:
|
|
case ItemCM_amaxy:
|
|
case ItemCM_amaxz:
|
|
case ItemCM_amaxe:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(" Amax ");
|
|
if(i==ItemCM_amaxx)lcdprintPGM(MSG_X);
|
|
if(i==ItemCM_amaxy)lcdprintPGM(MSG_Y);
|
|
if(i==ItemCM_amaxz)lcdprintPGM(MSG_Z);
|
|
if(i==ItemCM_amaxe)lcdprintPGM(MSG_E);
|
|
lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100));lcdprintPGM("00");
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100;
|
|
}
|
|
else
|
|
{
|
|
max_acceleration_units_per_sq_second[i-ItemCM_amaxx]= encoderpos*100;
|
|
encoderpos=activeline*lcdslow;
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<1) encoderpos=1;
|
|
if(encoderpos>990) encoderpos=990;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00");
|
|
}
|
|
|
|
}break;
|
|
case ItemCM_aret://float retract_acceleration = 7000;
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_A_RETRACT);
|
|
lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));lcdprintPGM("00");
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)retract_acceleration/100;
|
|
}
|
|
else
|
|
{
|
|
retract_acceleration= encoderpos*100;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<10) encoderpos=10;
|
|
if(encoderpos>990) encoderpos=990;
|
|
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00");
|
|
}
|
|
|
|
}break;
|
|
case ItemCM_xsteps://axis_steps_per_unit[i] = code_value();
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_XSTEPS);
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[0]));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)(axis_steps_per_unit[0]*100.0);
|
|
}
|
|
else
|
|
{
|
|
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[0]);
|
|
position[X_AXIS]=lround(position[X_AXIS]*factor);
|
|
//current_position[3]*=factor;
|
|
axis_steps_per_unit[X_AXIS]= encoderpos/100.0;
|
|
encoderpos=activeline*lcdslow;
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<5) encoderpos=5;
|
|
if(encoderpos>99999) encoderpos=99999;
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(encoderpos/100.0));
|
|
}
|
|
|
|
}break;
|
|
case ItemCM_ysteps://axis_steps_per_unit[i] = code_value();
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_YSTEPS);
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[1]));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)(axis_steps_per_unit[1]*100.0);
|
|
}
|
|
else
|
|
{
|
|
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[1]);
|
|
position[Y_AXIS]=lround(position[Y_AXIS]*factor);
|
|
//current_position[3]*=factor;
|
|
axis_steps_per_unit[Y_AXIS]= encoderpos/100.0;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<5) encoderpos=5;
|
|
if(encoderpos>9999) encoderpos=9999;
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(encoderpos/100.0));
|
|
}
|
|
|
|
}break;
|
|
case ItemCM_zsteps://axis_steps_per_unit[i] = code_value();
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_ZSTEPS);
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[2]));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)(axis_steps_per_unit[2]*100.0);
|
|
}
|
|
else
|
|
{
|
|
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[2]);
|
|
position[Z_AXIS]=lround(position[Z_AXIS]*factor);
|
|
//current_position[3]*=factor;
|
|
axis_steps_per_unit[Z_AXIS]= encoderpos/100.0;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<5) encoderpos=5;
|
|
if(encoderpos>9999) encoderpos=9999;
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(encoderpos/100.0));
|
|
}
|
|
|
|
}break;
|
|
|
|
case ItemCM_esteps://axis_steps_per_unit[i] = code_value();
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_ESTEPS);
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[3]));
|
|
}
|
|
|
|
if((activeline!=line) )
|
|
break;
|
|
|
|
if(CLICKED)
|
|
{
|
|
linechanging=!linechanging;
|
|
if(linechanging)
|
|
{
|
|
encoderpos=(int)(axis_steps_per_unit[3]*100.0);
|
|
}
|
|
else
|
|
{
|
|
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[3]);
|
|
position[E_AXIS]=lround(position[E_AXIS]*factor);
|
|
//current_position[3]*=factor;
|
|
axis_steps_per_unit[E_AXIS]= encoderpos/100.0;
|
|
encoderpos=activeline*lcdslow;
|
|
|
|
}
|
|
BLOCK;
|
|
beepshort();
|
|
}
|
|
if(linechanging)
|
|
{
|
|
if(encoderpos<5) encoderpos=5;
|
|
if(encoderpos>9999) encoderpos=9999;
|
|
lcd.setCursor(11,line);lcd.print(ftostr52(encoderpos/100.0));
|
|
}
|
|
|
|
}break;
|
|
default:
|
|
break;
|
|
}
|
|
line++;
|
|
}
|
|
updateActiveLines(ItemCM_esteps,encoderpos);
|
|
}
|
|
|
|
|
|
enum {
|
|
ItemC_exit,ItemC_temp,ItemC_move,
|
|
ItemC_store, ItemC_load,ItemC_failsafe
|
|
};
|
|
|
|
void MainMenu::showControl()
|
|
{
|
|
uint8_t line=0;
|
|
clearIfNecessary();
|
|
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
|
|
{
|
|
switch(i)
|
|
{
|
|
case ItemC_exit:
|
|
MENUITEM( lcdprintPGM(MSG_MAIN_WIDE) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
|
break;
|
|
case ItemC_temp:
|
|
MENUITEM( lcdprintPGM(MSG_TEMPERATURE_WIDE) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
|
|
break;
|
|
case ItemC_move:
|
|
MENUITEM( lcdprintPGM(MSG_MOTION_WIDE) , BLOCK;status=Sub_MotionControl;beepshort(); ) ;
|
|
break;
|
|
case ItemC_store:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM);
|
|
}
|
|
if((activeline==line) && CLICKED)
|
|
{
|
|
//enquecommand("M84");
|
|
beepshort();
|
|
BLOCK;
|
|
EEPROM_StoreSettings();
|
|
}
|
|
}break;
|
|
case ItemC_load:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_LOAD_EPROM);
|
|
}
|
|
if((activeline==line) && CLICKED)
|
|
{
|
|
//enquecommand("M84");
|
|
beepshort();
|
|
BLOCK;
|
|
EEPROM_RetrieveSettings();
|
|
}
|
|
}break;
|
|
case ItemC_failsafe:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);lcdprintPGM(MSG_RESTORE_FAILSAFE);
|
|
}
|
|
if((activeline==line) && CLICKED)
|
|
{
|
|
//enquecommand("M84");
|
|
beepshort();
|
|
BLOCK;
|
|
EEPROM_RetrieveSettings(true);
|
|
}
|
|
}break;
|
|
default:
|
|
break;
|
|
}
|
|
line++;
|
|
}
|
|
updateActiveLines(ItemC_failsafe,encoderpos);
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void MainMenu::showSD()
|
|
{
|
|
#ifdef SDSUPPORT
|
|
uint8_t line=0;
|
|
|
|
clearIfNecessary();
|
|
static uint8_t nrfiles=0;
|
|
if(force_lcd_update)
|
|
{
|
|
if(card.cardOK)
|
|
{
|
|
nrfiles=card.getnrfilenames();
|
|
}
|
|
else
|
|
{
|
|
nrfiles=0;
|
|
lineoffset=0;
|
|
}
|
|
}
|
|
bool enforceupdate=false;
|
|
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
|
|
{
|
|
switch(i)
|
|
{
|
|
case 0:
|
|
MENUITEM( lcdprintPGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
|
|
break;
|
|
// case 1:
|
|
// {
|
|
// if(force_lcd_update)
|
|
// {
|
|
// lcd.setCursor(0,line);
|
|
// #ifdef CARDINSERTED
|
|
// if(CARDINSERTED)
|
|
// #else
|
|
// if(true)
|
|
// #endif
|
|
// {
|
|
// lcdprintPGM(" \004Refresh");
|
|
// }
|
|
// else
|
|
// {
|
|
// lcdprintPGM(" \004Insert Card");
|
|
// }
|
|
//
|
|
// }
|
|
// if((activeline==line) && CLICKED)
|
|
// {
|
|
// BLOCK;
|
|
// beepshort();
|
|
// card.initsd();
|
|
// force_lcd_update=true;
|
|
// nrfiles=card.getnrfilenames();
|
|
// }
|
|
// }break;
|
|
case 1:
|
|
MENUITEM( lcd.print(" ");card.getWorkDirName();
|
|
if(card.filename[0]=='/') lcdprintPGM(MSG_REFRESH);
|
|
else {
|
|
lcd.print("\005");
|
|
lcd.print(card.filename);
|
|
lcd.print("/..");
|
|
} ,
|
|
BLOCK;
|
|
if(SDCARDDETECT == -1) card.initsd();
|
|
card.updir();
|
|
enforceupdate=true;
|
|
lineoffset=0;
|
|
beepshort(); ) ;
|
|
|
|
break;
|
|
default:
|
|
{
|
|
#define FIRSTITEM 2
|
|
if(i-FIRSTITEM<nrfiles)
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
card.getfilename(i-FIRSTITEM);
|
|
//Serial.print("Filenr:");Serial.println(i-2);
|
|
lcd.setCursor(0,line);lcdprintPGM(" ");
|
|
if(card.filenameIsDir) lcd.print("\005");
|
|
lcd.print(card.filename);
|
|
}
|
|
if((activeline==line) && CLICKED)
|
|
{
|
|
BLOCK
|
|
card.getfilename(i-FIRSTITEM);
|
|
if(card.filenameIsDir)
|
|
{
|
|
for(int8_t i=0;i<strlen(card.filename);i++)
|
|
card.filename[i]=tolower(card.filename[i]);
|
|
card.chdir(card.filename);
|
|
lineoffset=0;
|
|
enforceupdate=true;
|
|
}
|
|
else
|
|
{
|
|
char cmd[30];
|
|
for(int8_t i=0;i<strlen(card.filename);i++)
|
|
card.filename[i]=tolower(card.filename[i]);
|
|
sprintf(cmd,"M23 %s",card.filename);
|
|
//sprintf(cmd,"M115");
|
|
enquecommand(cmd);
|
|
enquecommand("M24");
|
|
beep();
|
|
status=Main_Status;
|
|
lcd_status(card.filename);
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
break;
|
|
}
|
|
line++;
|
|
}
|
|
updateActiveLines(FIRSTITEM+nrfiles-1,encoderpos);
|
|
if(enforceupdate)
|
|
{
|
|
force_lcd_update=true;
|
|
enforceupdate=false;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
enum {ItemM_watch, ItemM_prepare, ItemM_control, ItemM_file };
|
|
void MainMenu::showMainMenu()
|
|
{
|
|
|
|
#ifndef ULTIPANEL
|
|
force_lcd_update=false;
|
|
#endif
|
|
if(tune)
|
|
{
|
|
if(!(movesplanned() ||card.sdprinting))
|
|
{
|
|
force_lcd_update=true;
|
|
tune=false;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if(movesplanned() ||card.sdprinting)
|
|
{
|
|
force_lcd_update=true;
|
|
tune=true;
|
|
}
|
|
}
|
|
clearIfNecessary();
|
|
for(int8_t line=0;line<LCD_HEIGHT;line++)
|
|
{
|
|
switch(line)
|
|
{
|
|
case ItemM_watch:
|
|
MENUITEM( lcdprintPGM(MSG_WATCH) , BLOCK;status=Main_Status;beepshort(); ) ;
|
|
break;
|
|
case ItemM_prepare:
|
|
MENUITEM( if(!tune) lcdprintPGM(MSG_PREPARE);else lcdprintPGM(MSG_TUNE); , BLOCK;status=Main_Prepare;beepshort(); ) ;
|
|
break;
|
|
|
|
case ItemM_control:
|
|
MENUITEM( lcdprintPGM(MSG_CONTROL_ARROW) , BLOCK;status=Main_Control;beepshort(); ) ;
|
|
break;
|
|
#ifdef SDSUPPORT
|
|
case ItemM_file:
|
|
{
|
|
if(force_lcd_update)
|
|
{
|
|
lcd.setCursor(0,line);
|
|
#ifdef CARDINSERTED
|
|
if(CARDINSERTED)
|
|
#else
|
|
if(true)
|
|
#endif
|
|
{
|
|
if(card.sdprinting)
|
|
lcdprintPGM(MSG_STOP_PRINT);
|
|
else
|
|
lcdprintPGM(MSG_CARD_MENU);
|
|
}
|
|
else
|
|
{
|
|
lcdprintPGM(MSG_NO_CARD);
|
|
}
|
|
}
|
|
#ifdef CARDINSERTED
|
|
if(CARDINSERTED)
|
|
#endif
|
|
if((activeline==line)&&CLICKED)
|
|
{
|
|
card.printingHasFinished();
|
|
BLOCK;
|
|
status=Main_SD;
|
|
beepshort();
|
|
}
|
|
}break;
|
|
#else
|
|
case ItemM_file:
|
|
break;
|
|
#endif
|
|
default:
|
|
SERIAL_ERROR_START;
|
|
SERIAL_ERRORLNPGM(MSG_SERIAL_ERROR_MENU_STRUCTURE);
|
|
break;
|
|
}
|
|
}
|
|
updateActiveLines(3,encoderpos);
|
|
}
|
|
|
|
void MainMenu::update()
|
|
{
|
|
static MainStatus oldstatus=Main_Menu; //init automatically causes foce_lcd_update=true
|
|
static long timeoutToStatus=0;
|
|
static bool oldcardstatus=false;
|
|
#ifdef CARDINSERTED
|
|
if((CARDINSERTED != oldcardstatus))
|
|
{
|
|
force_lcd_update=true;
|
|
oldcardstatus=CARDINSERTED;
|
|
//Serial.println("echo: SD CHANGE");
|
|
if(CARDINSERTED)
|
|
{
|
|
card.initsd();
|
|
LCD_MESSAGEPGM(MSG_SD_INSERTED);
|
|
}
|
|
else
|
|
{
|
|
card.release();
|
|
LCD_MESSAGEPGM(MSG_SD_REMOVED);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if(status!=oldstatus)
|
|
{
|
|
force_lcd_update=true;
|
|
encoderpos=0;
|
|
lineoffset=0;
|
|
|
|
oldstatus=status;
|
|
}
|
|
if( (encoderpos!=lastencoderpos) || CLICKED)
|
|
timeoutToStatus=millis()+STATUSTIMEOUT;
|
|
|
|
switch(status)
|
|
{
|
|
case Main_Status:
|
|
{
|
|
showStatus();
|
|
if(CLICKED)
|
|
{
|
|
linechanging=false;
|
|
BLOCK
|
|
status=Main_Menu;
|
|
timeoutToStatus=millis()+STATUSTIMEOUT;
|
|
}
|
|
}break;
|
|
case Main_Menu:
|
|
{
|
|
showMainMenu();
|
|
linechanging=false;
|
|
}break;
|
|
case Main_Prepare:
|
|
{
|
|
if(tune)
|
|
{
|
|
showTune();
|
|
}
|
|
else
|
|
{
|
|
showPrepare();
|
|
}
|
|
}break;
|
|
case Sub_PrepareMove:
|
|
{
|
|
showAxisMove();
|
|
}break;
|
|
case Main_Control:
|
|
{
|
|
showControl();
|
|
}break;
|
|
case Sub_MotionControl:
|
|
{
|
|
showControlMotion();
|
|
}break;
|
|
case Sub_TempControl:
|
|
{
|
|
showControlTemp();
|
|
}break;
|
|
case Main_SD:
|
|
{
|
|
showSD();
|
|
}break;
|
|
}
|
|
|
|
if(timeoutToStatus<millis())
|
|
status=Main_Status;
|
|
//force_lcd_update=false;
|
|
lastencoderpos=encoderpos;
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
// convert float to string with +123.4 format
|
|
char *ftostr3(const float &x)
|
|
{
|
|
//sprintf(conv,"%5.1f",x);
|
|
int xx=x;
|
|
conv[0]=(xx/100)%10+'0';
|
|
conv[1]=(xx/10)%10+'0';
|
|
conv[2]=(xx)%10+'0';
|
|
conv[3]=0;
|
|
return conv;
|
|
}
|
|
|
|
char *itostr2(const uint8_t &x)
|
|
{
|
|
//sprintf(conv,"%5.1f",x);
|
|
int xx=x;
|
|
conv[0]=(xx/10)%10+'0';
|
|
conv[1]=(xx)%10+'0';
|
|
conv[2]=0;
|
|
return conv;
|
|
}
|
|
|
|
// convert float to string with +123.4 format
|
|
char *ftostr31(const float &x)
|
|
{
|
|
int xx=x*10;
|
|
conv[0]=(xx>=0)?'+':'-';
|
|
xx=abs(xx);
|
|
conv[1]=(xx/1000)%10+'0';
|
|
conv[2]=(xx/100)%10+'0';
|
|
conv[3]=(xx/10)%10+'0';
|
|
conv[4]='.';
|
|
conv[5]=(xx)%10+'0';
|
|
conv[6]=0;
|
|
return conv;
|
|
}
|
|
|
|
char *ftostr32(const float &x)
|
|
{
|
|
int xx=x*100;
|
|
conv[0]=(xx>=0)?'+':'-';
|
|
xx=abs(xx);
|
|
conv[1]=(xx/100)%10+'0';
|
|
conv[2]='.';
|
|
conv[3]=(xx/10)%10+'0';
|
|
conv[4]=(xx)%10+'0';
|
|
conv[6]=0;
|
|
return conv;
|
|
}
|
|
|
|
char *itostr31(const int &xx)
|
|
{
|
|
conv[0]=(xx>=0)?'+':'-';
|
|
conv[1]=(xx/1000)%10+'0';
|
|
conv[2]=(xx/100)%10+'0';
|
|
conv[3]=(xx/10)%10+'0';
|
|
conv[4]='.';
|
|
conv[5]=(xx)%10+'0';
|
|
conv[6]=0;
|
|
return conv;
|
|
}
|
|
|
|
char *itostr3(const int &xx)
|
|
{
|
|
conv[0]=(xx/100)%10+'0';
|
|
conv[1]=(xx/10)%10+'0';
|
|
conv[2]=(xx)%10+'0';
|
|
conv[3]=0;
|
|
return conv;
|
|
}
|
|
|
|
char *itostr4(const int &xx)
|
|
{
|
|
conv[0]=(xx/1000)%10+'0';
|
|
conv[1]=(xx/100)%10+'0';
|
|
conv[2]=(xx/10)%10+'0';
|
|
conv[3]=(xx)%10+'0';
|
|
conv[4]=0;
|
|
return conv;
|
|
}
|
|
|
|
// convert float to string with +1234.5 format
|
|
char *ftostr51(const float &x)
|
|
{
|
|
int xx=x*10;
|
|
conv[0]=(xx>=0)?'+':'-';
|
|
xx=abs(xx);
|
|
conv[1]=(xx/10000)%10+'0';
|
|
conv[2]=(xx/1000)%10+'0';
|
|
conv[3]=(xx/100)%10+'0';
|
|
conv[4]=(xx/10)%10+'0';
|
|
conv[5]='.';
|
|
conv[6]=(xx)%10+'0';
|
|
conv[7]=0;
|
|
return conv;
|
|
}
|
|
|
|
// convert float to string with +123.45 format
|
|
char *ftostr52(const float &x)
|
|
{
|
|
int xx=x*100;
|
|
conv[0]=(xx>=0)?'+':'-';
|
|
xx=abs(xx);
|
|
conv[1]=(xx/10000)%10+'0';
|
|
conv[2]=(xx/1000)%10+'0';
|
|
conv[3]=(xx/100)%10+'0';
|
|
conv[4]='.';
|
|
conv[5]=(xx/10)%10+'0';
|
|
conv[6]=(xx)%10+'0';
|
|
conv[7]=0;
|
|
return conv;
|
|
}
|
|
|
|
#endif //ULTRA_LCD
|
|
|
|
|