MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
f87012a063
Firmware/Marlin
History
Scott Lahteine 62cbaa302e Z_DUAL_ENDSTOP - make offset a configuration item 
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.

z_endstop_adj is initialized in two places so both had to be modified.
2017-04-06 15:57:10 -05:00
..
example_configurations Z_DUAL_ENDSTOP - make offset a configuration item 2017-04-06 15:57:10 -05:00
blinkm.cpp
blinkm.h
boards.h Board A4JP should be SCOOVO_X9H 2017-03-27 22:22:13 -05:00
buzzer.h fixed warning: ISO C++ forbids compound-literals 2016-10-22 11:23:16 -05:00
cardreader.cpp Additional cleanup of UBL code 2017-03-22 20:51:10 -05:00
cardreader.h Dynamic allocation for SDCARD_SORT_ALPHA 2017-02-14 21:37:25 -06:00
circularqueue.h
Conditionals_LCD.h Configurable delay for BLTouch servo emulation 2017-04-02 11:14:53 -05:00
Conditionals_post.h Fix: Thermal runaway if nonexistent bed's temp is set 2017-04-02 11:48:10 -05:00
Conditionals.h
Configuration_adv.h Z_DUAL_ENDSTOP - make offset a configuration item 2017-04-06 15:57:10 -05:00
configuration_store.cpp Z_DUAL_ENDSTOP - make offset a configuration item 2017-04-06 15:57:10 -05:00
configuration_store.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
Configuration.h Use same config name for all mesh dimensions 2017-04-06 00:42:52 -05:00
dac_mcp4728.cpp Fix DAC current code 2016-10-17 15:17:57 -05:00
dac_mcp4728.h Fix DAC current code 2016-10-17 15:17:57 -05:00
digipot_mcp4451.cpp
dogm_bitmaps.h
dogm_font_data_6x9_marlin.h
dogm_font_data_HD44780_C.h
dogm_font_data_HD44780_J.h
dogm_font_data_HD44780_W.h
dogm_font_data_ISO10646_1_tr.h Improve M600 with timeout, wait for heatup. 2017-02-15 05:29:34 -06:00
dogm_font_data_ISO10646_1.h
dogm_font_data_ISO10646_5_Cyrillic.h
dogm_font_data_ISO10646_CN.h
dogm_font_data_ISO10646_Greek.h Change font decent to -1 for tt and gr 2016-11-26 02:29:23 +01:00
dogm_font_data_ISO10646_Kana.h
dogm_font_data_Marlin_symbols.h
duration_t.h Fix formatting of print time hours above one day 2017-03-01 18:55:25 +02:00
endstop_interrupts.h Add and apply WITHIN macro 2017-03-31 09:27:48 -05:00
endstops.cpp Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap 2017-04-02 10:32:04 -05:00
endstops.h guaranteed BLTouch detection 2017-02-11 12:01:34 -06:00
enum.h Implement the "manual" option for ABL 2017-03-31 11:50:18 -05:00
fastio.h Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e 2016-10-31 08:01:41 -05:00
G26_Mesh_Validation_Tool.cpp Rename all UBL files with a ubl_ prefix 2017-04-06 05:33:27 -05:00
hex_print_routines.cpp Various UBL cleanups and bug fixes 2017-03-30 17:09:49 -05:00
hex_print_routines.h Various UBL cleanups and bug fixes 2017-03-30 17:09:49 -05:00
language_an.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_bg.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_ca.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_cn.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_cz.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_da.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_de.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_el-gr.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_el.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_en.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_es.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_eu.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_fi.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_fr.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_gl.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_hr.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_it.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_kana_utf8.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_kana.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_nl.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_pl.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_pt_utf8.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_pt-br_utf8.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_pt-br.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_pt.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_ru.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_test.h
language_tr.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_uk.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_zh_CN.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language_zh_TW.h Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
language.h Immediate commands take precedence 2017-03-19 21:50:48 -05:00
M100_Free_Mem_Chk.cpp Further repairs to UBL, comments, spacing 2017-03-31 02:20:20 -05:00
macros.h Apply FIXFLOAT macro 2017-03-31 09:27:48 -05:00
Makefile Merge pull request #5994 from StefanBruens/fix_Makefile_errors 2017-03-29 06:32:08 -05:00
Marlin_main.cpp Rename all UBL files with a ubl_ prefix 2017-04-06 05:33:27 -05:00
Marlin.h Use same config name for all mesh dimensions 2017-04-06 00:42:52 -05:00
Marlin.ino TMC2130 Library: @teemuatlut replaces @makertum 2017-03-07 04:22:06 -06:00
MarlinConfig.h
MarlinSerial.cpp Patch MarlinSerial to match up with 32-bit version 2017-04-02 04:39:18 -05:00
MarlinSerial.h Patch MarlinSerial to match up with 32-bit version 2017-04-02 04:39:18 -05:00
mesh_bed_leveling.cpp Use same config name for all mesh dimensions 2017-04-06 00:42:52 -05:00
mesh_bed_leveling.h Use same config name for all mesh dimensions 2017-04-06 00:42:52 -05:00
nozzle.cpp Apply prior nozzle clean update 2017-03-06 03:14:59 -06:00
nozzle.h Added circle pattern for nozzle cleaning feature 2017-03-06 03:03:00 -06:00
pins_3DRAG.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_5DPRINT.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_AZTEEG_X1.h
pins_AZTEEG_X3_PRO.h Predefine auto fan pins in some pins files 2016-10-26 18:38:32 -05:00
pins_AZTEEG_X3.h Follow-up the PR #5087 (Fixed SERVO pins on Azteeg X3), etc 2016-10-27 06:46:03 +09:00
pins_BAM_DICE_DUE.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_BQ_ZUM_MEGA_3D.h Updated bq Hephestos 2 example configuration 2016-12-13 09:26:07 +00:00
pins_BRAINWAVE_PRO.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_BRAINWAVE.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_CHEAPTRONIC.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_CNCONTROLS_11.h Predefine auto fan pins in some pins files 2016-10-26 18:38:32 -05:00
pins_CNCONTROLS_12.h Predefine auto fan pins in some pins files 2016-10-26 18:38:32 -05:00
pins_ELEFU_3.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_FELIX2.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_GEN3_MONOLITHIC.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_GEN3_PLUS.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_GEN6_DELUXE.h
pins_GEN6.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_GEN7_12.h Label analog pins in a similar way 2016-10-05 06:13:30 -05:00
pins_GEN7_13.h
pins_GEN7_14.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_GEN7_CUSTOM.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_K8200.h
pins_K8400.h Disable SD Detect for K8400 2016-12-28 23:21:18 +01:00
pins_LEAPFROG.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_MEGACONTROLLER.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_MEGATRONICS_2.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_MEGATRONICS_3.h Remove unnecessary tabs and spaces 2016-12-16 00:21:32 +09:00
pins_MEGATRONICS.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_MELZI_MAKR3D.h #if defined => #ifdef / PIN_EXISTS 2017-03-22 20:51:11 -05:00
pins_MELZI.h #if defined => #ifdef / PIN_EXISTS 2017-03-22 20:51:11 -05:00
pins_MIGHTYBOARD_REVE.h Developer note in pins_MIGHTYBOARD_REVE.h 2016-10-31 08:22:39 -05:00
pins_MINIRAMBO.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_MINITRONICS.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_MKS_13.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_MKS_BASE.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_OMCA_A.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_OMCA.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_PRINTRBOARD_REVF.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_PRINTRBOARD.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_RAMBO.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_RAMPS_13.h
pins_RAMPS_OLD.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_RAMPS.h Add TMC2130 support 2016-11-21 00:17:45 -06:00
pins_RIGIDBOARD_V2.h Default DAC values for RigidBoard V2 2017-02-09 22:39:00 -06:00
pins_RIGIDBOARD.h Remove BEEPER_PIN override in pins_RIGIDBOARD.h 2017-03-01 18:26:29 -06:00
pins_RUMBA.h Tweak "can not" => "can't" in RUMBA pins 2017-03-29 01:04:50 -05:00
pins_SAINSMART_2IN1.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_SANGUINOLOLU_11.h Add Support TinyBoy2 OLED/Encoder panel 2017-03-31 04:05:34 -05:00
pins_SANGUINOLOLU_12.h #if defined => #ifdef / PIN_EXISTS 2017-03-22 20:51:11 -05:00
pins_SAV_MKI.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_SCOOVO_X9H.h Board A4JP should be SCOOVO_X9H 2017-03-27 22:22:13 -05:00
pins_SETHI.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_STB_11.h #if defined => #ifdef / PIN_EXISTS 2017-03-22 20:51:11 -05:00
pins_TEENSY2.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_TEENSYLU.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_ULTIMAIN_2.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_ULTIMAKER_OLD.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins_ULTIMAKER.h Follow-up the PR #4955, etc 2016-10-10 14:22:43 +09:00
pins.h Board A4JP should be SCOOVO_X9H 2017-03-27 22:22:13 -05:00
pinsDebug_list.h pinsDebug with more features, uses less RAM 2017-04-06 14:46:28 -05:00
pinsDebug_Teensyduino.h Remove extraneous whitespace 2017-03-18 03:17:39 -05:00
pinsDebug.h pinsDebug with more features, uses less RAM 2017-04-06 14:46:28 -05:00
planner_bezier.cpp Improve planner kinematics, fix delta ABL 2016-10-09 13:32:46 -05:00
planner_bezier.h
planner.cpp Syntax cleanup 2017-04-01 21:53:46 -05:00
planner.h Cleanup to planner.cpp 2017-03-29 06:48:07 -05:00
platformio.ini Move platformio directories out of source tree 2016-10-08 13:45:26 -04:00
point_t.h
printcounter.cpp Fix single-char echo and pinMode usage 2017-03-18 11:35:20 -05:00
printcounter.h
qr_solve.cpp Enable ABL by type, support bilinear on cartesian 2016-09-25 23:35:37 -05:00
qr_solve.h Enable ABL by type, support bilinear on cartesian 2016-09-25 23:35:37 -05:00
SanityCheck.h Use same config name for all mesh dimensions 2017-04-06 00:42:52 -05:00
Sd2Card.cpp Fix SD_CHECK_AND_RETRY condition 2017-02-11 23:55:56 -06:00
Sd2Card.h
SdBaseFile.cpp Clear dir_t size, not pointer size 2016-10-25 22:59:40 -05:00
SdBaseFile.h
SdFatConfig.h
SdFatStructs.h
SdFatUtil.cpp
SdFatUtil.h
SdFile.cpp
SdFile.h
SdInfo.h
SdVolume.cpp
SdVolume.h
serial.cpp Relocate serial macros and functions 2017-04-02 01:05:25 -05:00
serial.h Relocate serial macros and functions 2017-04-02 01:05:25 -05:00
servo.cpp Additional cleanup of UBL code 2017-03-22 20:51:10 -05:00
servo.h
speed_lookuptable.h Spacing, cleanup in speed_lookuptable.h 2016-12-19 14:52:45 -08:00
stepper_dac.cpp Remove extraneous whitespace 2017-03-18 03:17:39 -05:00
stepper_dac.h Cleanup of code style 2016-10-07 15:57:24 -05:00
stepper_indirection.cpp TMC2130 Library: @teemuatlut replaces @makertum 2017-03-07 04:22:06 -06:00
stepper_indirection.h TMC2130 Library: @teemuatlut replaces @makertum 2017-03-07 04:22:06 -06:00
stepper.cpp Various UBL cleanups and bug fixes 2017-03-30 17:09:49 -05:00
stepper.h First draft of Unified Stepper / E Advance ISR 2016-12-21 01:34:39 -08:00
stopwatch.cpp
stopwatch.h
temperature.cpp Fix: Thermal runaway if nonexistent bed's temp is set 2017-04-02 11:48:10 -05:00
temperature.h Fix: Thermal runaway if nonexistent bed's temp is set 2017-04-02 11:48:10 -05:00
thermistornames.h Add Thermistor 75: MGB18 silicon pad 2017-03-18 11:35:20 -05:00
thermistortable_1.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_2.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_3.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_4.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_5.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_6.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_7.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_8.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_9.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_10.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_11.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_12.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_13.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_20.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_51.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_52.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_55.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_60.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_66.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_70.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_71.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_75.h Add Thermistor 75: MGB18 silicon pad 2017-03-18 11:35:20 -05:00
thermistortable_110.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_147.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_998.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_999.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_1010.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortable_1047.h Split up thermistor tables 2016-12-19 14:47:54 -08:00
thermistortables.h Add Thermistor 75: MGB18 silicon pad 2017-03-18 11:35:20 -05:00
twibus.cpp Add and apply WITHIN macro 2017-03-31 09:27:48 -05:00
twibus.h M155=>M260, M156=>M261 2016-11-08 17:54:54 -06:00
types.h
ubl_G29.cpp Rename all UBL files with a ubl_ prefix 2017-04-06 05:33:27 -05:00
ubl_motion.cpp Rename all UBL files with a ubl_ prefix 2017-04-06 05:33:27 -05:00
ubl.cpp Rename all UBL files with a ubl_ prefix 2017-04-06 05:33:27 -05:00
ubl.h Adjust indentation in ubl.h 2017-04-06 05:36:16 -05:00
ultralcd_impl_DOGM.h Apply FIXFLOAT macro 2017-03-31 09:27:48 -05:00
ultralcd_impl_HD44780.h Apply FIXFLOAT macro 2017-03-31 09:27:48 -05:00
ultralcd_st7920_u8glib_rrd.h Distribute GLCD screen updates in time 2016-12-05 12:22:54 -06:00
ultralcd.cpp Rename all UBL files with a ubl_ prefix 2017-04-06 05:33:27 -05:00
ultralcd.h status_printf => lcd_status_printf_P 2017-04-02 01:05:25 -05:00
utf_mapper.h utf8-mapper for Turkish 2016-12-12 15:56:59 +01:00
utility.cpp Add and apply WITHIN macro 2017-03-31 09:27:48 -05:00
utility.h Replace ftostr62sign with ftostr62rj 2016-12-12 20:25:20 +01:00
vector_3.cpp Adjust vector_3 code with const, some optimization 2017-03-23 19:41:42 -05:00
vector_3.h Enable ABL by type, support bilinear on cartesian 2016-09-25 23:35:37 -05:00
Version.h Document PROTOCOL_VERSION 2017-03-05 04:43:46 -06:00
watchdog.cpp Correct comment on watchdog timer 2016-12-19 22:27:28 -08:00
watchdog.h