whosawhatsis fd5b7e0cec Separate PID_MAX from BANG_MAX ...

This allows PID_FUNCTIONAL_RANGE to use a maximum duty cycle higher
than PID_MAX. This is useful for powerful heaters to heat quickly in
bang-bang mode, but use a lower duty cycle that is easier to stabilize
in PID mode.

2013-03-22 18:16:26 -07:00

..

cardreader.cpp

Also skip .files and _files with long filenames

2013-01-31 12:07:42 -05:00

cardreader.h

The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.

2012-12-12 11:47:03 +01:00

Configuration_adv.h

Added a feature to have filament change by gcode or display trigger.

2013-01-27 13:21:34 +01:00

Configuration.h

Separate PID_MAX from BANG_MAX

2013-03-22 18:16:26 -07:00

ConfigurationStore.cpp

Fixed #317

2012-11-24 17:32:30 +01:00

ConfigurationStore.h

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

COPYING

first commit

2011-08-12 22:28:35 +02:00

create_speed_lookuptable.py

Added 20MHz support.

2012-03-11 12:25:04 +01:00

createTemperatureLookupMarlin.py

Added new temperature lookup table creation tool. This one uses stein hart-hart equations.

2012-11-16 23:51:05 +01:00

fastio.h

Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.

2012-12-08 15:16:38 -08:00

language.h

Replaced corrupted language.h file on local PC with current from ErikZalm/Marlin

2013-03-01 17:27:57 +01:00

LCD Menu Tree.pdf

Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.

2012-08-29 21:08:41 +01:00

LiquidCrystalRus.cpp

First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.

2012-11-06 12:06:41 +01:00

LiquidCrystalRus.h

Enables support the Cyrillic alphabet for LCD

2012-10-12 19:06:43 +04:00

Makefile

fixes for ramps compilation using installed arduino ide

2013-01-08 12:54:31 +01:00

Marlin_main.cpp

Only compile the new extruder offset code if you have multiple extruders.

2013-02-27 12:32:07 +01:00

Marlin.h

Added libraries from Arduino 1.0.3 for sanguino build

2013-01-07 17:26:50 +01:00

Marlin.pde

Mistake there, not sure why I did that. My bad.

2012-12-05 20:23:13 +01:00

MarlinSerial.cpp

Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.

2012-12-09 01:32:09 -08:00

MarlinSerial.h

Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.

2012-12-09 01:32:09 -08:00

Menu Plans.xlsx

Tidy up

2012-08-29 22:53:41 +01:00

motion_control.cpp

software_endstops: use *_MIN_POS and *_MAX_POS for arcs

2012-08-10 19:36:30 +01:00

motion_control.h

Removed interrupt nesting in the stepper ISR.

2011-11-27 21:12:55 +01:00

pins.h

Add pins for Motherboard variant 64

2013-03-01 17:47:32 +01:00

planner.cpp

Minor cleanup of the new FAN_KICKSTART code. #334

2013-01-10 11:08:45 +01:00

planner.h

Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.

2012-05-09 08:05:13 +03:00

Sd2Card.cpp

Fix for a few -Wextra warnings.

2012-11-12 15:35:28 +01:00

Sd2Card.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

Sd2PinMap.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdBaseFile.cpp

Few simple fixes that save RAM, as static strings are stored in RAM by default.

2012-11-28 10:30:34 +01:00

SdBaseFile.h

Added long filename support.

2012-08-22 14:49:57 +02:00

SdFatConfig.h

Added long filename support.

2012-08-22 14:49:57 +02:00

SdFatStructs.h

Added long filename support.

2012-08-22 14:49:57 +02:00

SdFatUtil.cpp

Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.

2012-02-11 16:02:47 +01:00

SdFatUtil.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFile.cpp

First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.

2012-11-06 12:06:41 +01:00

SdFile.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdInfo.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdVolume.cpp

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdVolume.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

speed_lookuptable.h

Made the 2nd speed lookup table condition more explicit.

2012-11-11 12:02:48 +01:00

stepper.cpp

Merge pull request #1 from illuminarti/Fix_E_Speed

2013-03-15 09:07:34 +01:00

stepper.h

Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit.

2013-01-08 11:53:18 +01:00

temperature.cpp

Separate PID_MAX from BANG_MAX

2013-03-22 18:16:26 -07:00

temperature.h

Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.

2012-12-09 23:00:06 +01:00

thermistortables.h

Adding Maker's Tool Works heated bed thermistor

2013-03-18 22:53:37 -05:00

ultralcd_implementation_hitachi_HD44780.h

Update Marlin/ultralcd_implementation_hitachi_HD44780.h

2013-02-12 20:06:51 +01:00

ultralcd.cpp

Also show the tune menu when USB printing.

2013-02-20 00:54:44 +01:00

ultralcd.h

Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.

2012-12-21 16:14:47 +01:00

watchdog.cpp

Fix compiling the watchdog error message when the manual reset watchdog is used.

2012-12-06 10:27:50 +01:00

watchdog.h

First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.

2012-11-06 12:06:41 +01:00