Firmware2/Marlin/language_bg.h

250 lines
14 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Bulgarian
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_BG_H
#define LANGUAGE_BG_H
2015-09-12 04:52:21 +02:00
#define MAPPER_D0D1 // For Cyrillic
#define DISPLAY_CHARSET_ISO10646_5
2015-09-12 04:52:21 +02:00
#define WELCOME_MSG MACHINE_NAME " Готов."
#define MSG_SD_INSERTED "Картата е поставена"
#define MSG_SD_REMOVED "Картата е извадена"
#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters
#define MSG_MAIN "Меню"
#define MSG_AUTOSTART "Автостарт"
#define MSG_DISABLE_STEPPERS "Изкл. двигатели"
#define MSG_AUTO_HOME "Паркиране"
#define MSG_AUTO_HOME_X "Home X"
#define MSG_AUTO_HOME_Y "Home Y"
#define MSG_AUTO_HOME_Z "Home Z"
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
#define MSG_LEVEL_BED_WAITING "Click to Begin"
#define MSG_LEVEL_BED_NEXT_POINT "Next Point"
#define MSG_LEVEL_BED_DONE "Leveling Done!"
2016-04-03 06:09:50 +02:00
#define MSG_LEVEL_BED_CANCEL "Cancel"
#define MSG_SET_HOME_OFFSETS "Задай Начало"
2016-04-03 03:00:39 +02:00
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
#define MSG_SET_ORIGIN "Изходна точка"
#define MSG_PREHEAT_1 "Подгряване PLA"
#define MSG_PREHEAT_1_N "Подгряване PLA"
#define MSG_PREHEAT_1_ALL "Подгр. PLA Всички"
#define MSG_PREHEAT_1_BEDONLY "Подгр. PLA Легло"
#define MSG_PREHEAT_1_SETTINGS "Настройки PLA"
#define MSG_PREHEAT_2 "Подгряване ABS"
#define MSG_PREHEAT_2_N "Подгряване ABS"
#define MSG_PREHEAT_2_ALL "Подгр. ABS Всички"
#define MSG_PREHEAT_2_BEDONLY "Подгр. ABS Легло"
#define MSG_PREHEAT_2_SETTINGS "Настройки ABS"
#define MSG_COOLDOWN "Охлаждане"
#define MSG_SWITCH_PS_ON "Вкл. захранване"
#define MSG_SWITCH_PS_OFF "Изкл. захранване"
#define MSG_EXTRUDE "Екструзия"
#define MSG_RETRACT "Откат"
#define MSG_MOVE_AXIS "Движение по ос"
#define MSG_LEVEL_BED "Нивелиране"
#define MSG_MOVE_X "Движение по X"
#define MSG_MOVE_Y "Движение по Y"
#define MSG_MOVE_Z "Движение по Z"
#define MSG_MOVE_E "Екструдер"
#define MSG_MOVE_01MM "Премести с 0.1mm"
#define MSG_MOVE_1MM "Премести с 1mm"
#define MSG_MOVE_10MM "Премести с 10mm"
#define MSG_SPEED "Скорост"
#define MSG_BED_Z "Bed Z"
#define MSG_NOZZLE LCD_STR_THERMOMETER " Дюза"
#define MSG_BED LCD_STR_THERMOMETER " Легло"
#define MSG_FAN_SPEED "Вентилатор"
#define MSG_FLOW "Поток"
#define MSG_CONTROL "Управление"
#define MSG_MIN LCD_STR_THERMOMETER " Минимум"
#define MSG_MAX LCD_STR_THERMOMETER " Максимум"
#define MSG_FACTOR LCD_STR_THERMOMETER " Фактор"
#define MSG_AUTOTEMP "Авто-темп."
#define MSG_ON "Вкл. "
#define MSG_OFF "Изкл. "
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_SELECT "Select"
#define MSG_ACC "Acc"
#define MSG_VX_JERK "Vx-jerk"
#define MSG_VY_JERK "Vy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-откат"
#define MSG_A_TRAVEL "A-travel"
#define MSG_XSTEPS "X стъпки/mm"
#define MSG_YSTEPS "Y стъпки/mm"
#define MSG_ZSTEPS "Z стъпки/mm"
#define MSG_ESTEPS "E стъпки/mm"
2016-12-08 11:57:41 +01:00
#define MSG_E1STEPS "E1 стъпки/mm"
#define MSG_E2STEPS "E2 стъпки/mm"
#define MSG_E3STEPS "E3 стъпки/mm"
#define MSG_E4STEPS "E4 стъпки/mm"
#define MSG_TEMPERATURE "Температура"
#define MSG_MOTION "Движение"
#define MSG_VOLUMETRIC "Нишка"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_DIAM "Диам. нишка"
#define MSG_CONTRAST "LCD контраст"
#define MSG_STORE_EPROM "Запази в EPROM"
#define MSG_LOAD_EPROM "Зареди от EPROM"
#define MSG_RESTORE_FAILSAFE "Фабрични настройки"
#define MSG_REFRESH LCD_STR_REFRESH "Обнови"
#define MSG_WATCH "Преглед"
#define MSG_PREPARE "Действия"
#define MSG_TUNE "Настройка"
#define MSG_PAUSE_PRINT "Пауза"
#define MSG_RESUME_PRINT "Възобнови печата"
#define MSG_STOP_PRINT "Спри печата"
#define MSG_CARD_MENU "Меню карта"
#define MSG_NO_CARD "Няма карта"
#define MSG_DWELL "Почивка..."
#define MSG_USERWAIT "Изчакване"
#define MSG_RESUMING "Продълж. печата"
#define MSG_PRINT_ABORTED "Печатът е прекъснат"
#define MSG_NO_MOVE "Няма движение"
#define MSG_KILLED "УБИТО."
#define MSG_STOPPED "СПРЯНО."
#define MSG_CONTROL_RETRACT "Откат mm"
#define MSG_CONTROL_RETRACT_SWAP "Смяна Откат mm"
#define MSG_CONTROL_RETRACTF "Откат V"
#define MSG_CONTROL_RETRACT_ZLIFT "Скок mm"
#define MSG_CONTROL_RETRACT_RECOVER "Възврат +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Смяна Възврат +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "Възврат V"
#define MSG_AUTORETRACT "Автоoткат"
#define MSG_FILAMENTCHANGE "Смяна нишка"
#define MSG_INIT_SDCARD "Иниц. SD-Карта"
#define MSG_CNG_SDCARD "Смяна SD-Карта"
#define MSG_ZPROBE_OUT "Z-сондата е извадена"
#define MSG_BLTOUCH_SELFTEST "BLTouch Self-Test"
#define MSG_BLTOUCH_RESET "Reset BLTouch"
2016-06-28 00:46:40 +02:00
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "first"
#define MSG_ZPROBE_ZOFFSET "Z Отстояние"
#define MSG_BABYSTEP_X "Министъпка X"
#define MSG_BABYSTEP_Y "Министъпка Y"
#define MSG_BABYSTEP_Z "Министъпка Z"
#define MSG_ENDSTOP_ABORT "Стоп Кр.Изключватели"
#define MSG_HEATING_FAILED_LCD "Heating failed"
#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP"
#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY"
#define MSG_ERR_MAXTEMP "Err: MAXTEMP"
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#define MSG_ERR_MINTEMP_BED "Err: MINTEMP BED"
#define MSG_ERR_Z_HOMING "G28 Z Forbidden"
#define MSG_HALTED "PRINTER HALTED"
#define MSG_PLEASE_RESET "Please reset"
#define MSG_SHORT_DAY "d" // One character only
#define MSG_SHORT_HOUR "h" // One character only
#define MSG_SHORT_MINUTE "m" // One character only
#define MSG_HEATING "Heating..."
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
2016-04-12 04:42:09 +02:00
#define MSG_DELTA_CALIBRATE "Делта Калибровка"
#define MSG_DELTA_CALIBRATE_X "Калибровка X"
#define MSG_DELTA_CALIBRATE_Y "Калибровка Y"
#define MSG_DELTA_CALIBRATE_Z "Калибровка Z"
#define MSG_DELTA_CALIBRATE_CENTER "Калибровка Център"
2015-09-12 04:52:21 +02:00
#define MSG_INFO_MENU "About Printer"
#define MSG_INFO_PRINTER_MENU "Printer Info"
#define MSG_INFO_STATS_MENU "Printer Stats"
#define MSG_INFO_BOARD_MENU "Board Info"
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
#define MSG_INFO_EXTRUDERS "Extruders"
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocol"
#define MSG_LIGHTS_ON "Case light on"
#define MSG_LIGHTS_OFF "Case light off"
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Print Count"
#define MSG_INFO_COMPLETED_PRINTS "Completed"
#define MSG_INFO_PRINT_TIME "Total print time"
#define MSG_INFO_PRINT_LONGEST "Longest job time"
#define MSG_INFO_PRINT_FILAMENT "Extruded total"
#else
#define MSG_INFO_PRINT_COUNT "Prints"
#define MSG_INFO_COMPLETED_PRINTS "Completed"
#define MSG_INFO_PRINT_TIME "Total"
#define MSG_INFO_PRINT_LONGEST "Longest"
#define MSG_INFO_PRINT_FILAMENT "Extruded"
#endif
#define MSG_INFO_MIN_TEMP "Min Temp"
#define MSG_INFO_MAX_TEMP "Max Temp"
#define MSG_INFO_PSU "Power Supply"
#define MSG_DRIVE_STRENGTH "Drive Strength"
#define MSG_DAC_PERCENT "Driver %"
#define MSG_DAC_EEPROM_WRITE "DAC EEPROM Write"
#define MSG_FILAMENT_CHANGE_HEADER "CHANGE FILAMENT"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CHANGE OPTIONS:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrude more"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resume print"
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 "Wait for start"
#define MSG_FILAMENT_CHANGE_INIT_2 "of the filament"
#define MSG_FILAMENT_CHANGE_INIT_3 "change"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wait for"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament unload"
#define MSG_FILAMENT_CHANGE_INSERT_1 "Insert filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "and press button"
#define MSG_FILAMENT_CHANGE_INSERT_3 "to continue..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Wait for"
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament load"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wait for"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrude"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wait for print"
#define MSG_FILAMENT_CHANGE_RESUME_2 "to resume"
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 "Please wait..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Ejecting..."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Insert and Click"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Loading..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extruding..."
#define MSG_FILAMENT_CHANGE_RESUME_1 "Resuming..."
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_BG_H