Firmware2/Marlin/language_ru.h

160 lines
8.9 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Russian
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_RU_H
#define LANGUAGE_RU_H
#define MAPPER_D0D1 // For Cyrillic
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_5
2015-02-01 06:58:38 +01:00
#define WELCOME_MSG MACHINE_NAME " Готов."
#define MSG_SD_INSERTED "Карта вставлена"
#define MSG_SD_REMOVED "Карта извлечена"
#define MSG_MAIN "Меню"
#define MSG_AUTOSTART "Автостарт"
#define MSG_DISABLE_STEPPERS "Выкл. двигатели"
#define MSG_AUTO_HOME "Парковка"
2016-03-19 12:41:03 +01:00
#define MSG_LEVEL_BED_HOMING "Homing"
#define MSG_SET_HOME_OFFSETS "Запомнить парковку"
#define MSG_SET_ORIGIN "Запомнить ноль"
#define MSG_PREHEAT_PLA "Преднагрев PLA"
#define MSG_PREHEAT_PLA_N "Греть PLA Сопло "
#define MSG_PREHEAT_PLA_ALL "Греть PLA Все"
#define MSG_PREHEAT_PLA_BEDONLY "Греть PLA Стол"
#define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA"
#define MSG_PREHEAT_ABS "Преднагрев ABS"
#define MSG_PREHEAT_ABS_N "Греть ABS Сопло "
#define MSG_PREHEAT_ABS_ALL "Греть ABS Все"
#define MSG_PREHEAT_ABS_BEDONLY "Греть ABS Стол"
#define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS"
#define MSG_COOLDOWN "Охлаждение"
#define MSG_SWITCH_PS_ON "Включить Питание"
#define MSG_SWITCH_PS_OFF "Отключить Питание"
#define MSG_EXTRUDE "Экструзия"
#define MSG_RETRACT "Втягивание"
#define MSG_MOVE_AXIS "Движение по осям"
#define MSG_MOVE_X "Движение по X"
#define MSG_MOVE_Y "Движение по Y"
#define MSG_MOVE_Z "Движение по Z"
#define MSG_MOVE_E "Экструдер"
#define MSG_MOVE_01MM "Движение XYZ 0.1mm"
#define MSG_MOVE_1MM "Движение XYZ 1mm"
#define MSG_MOVE_10MM "Движение XY 10mm"
#define MSG_LEVEL_BED "Калибровать стол"
#define MSG_SPEED "Скорость"
#define MSG_NOZZLE LCD_STR_THERMOMETER " Сопло"
#define MSG_BED LCD_STR_THERMOMETER " Стол"
#define MSG_FAN_SPEED "Кулер"
#define MSG_FLOW "Поток"
#define MSG_CONTROL "Настройки"
#define MSG_MIN LCD_STR_THERMOMETER " Минимум"
#define MSG_MAX LCD_STR_THERMOMETER " Максимум"
#define MSG_FACTOR LCD_STR_THERMOMETER " Фактор"
#define MSG_AUTOTEMP "Автотемпература"
#define MSG_ON "Вкл. "
#define MSG_OFF "Откл. "
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Acc"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax"
#define MSG_A_RETRACT "A-втягивание"
#define MSG_XSTEPS "X шаг/мм"
#define MSG_YSTEPS "Y шаг/мм"
#define MSG_ZSTEPS "Z шаг/мм"
#define MSG_ESTEPS "E шаг/мм"
#define MSG_TEMPERATURE "Температура"
#define MSG_MOTION "Механика"
#define MSG_VOLUMETRIC "Пруток"
#define MSG_VOLUMETRIC_ENABLED "E в mm3"
#define MSG_FILAMENT_DIAM "Диаметр прутка"
#define MSG_CONTRAST "Контраст LCD"
#define MSG_STORE_EPROM "Сохранить в EEPROM"
#define MSG_LOAD_EPROM "Считать из EEPROM"
#define MSG_RESTORE_FAILSAFE "Сброс EEPROM"
#define MSG_REFRESH "Обновить"
#define MSG_WATCH "Обзор"
#define MSG_PREPARE "Действия"
#define MSG_TUNE "Настройки"
#define MSG_PAUSE_PRINT "Пауза печати"
#define MSG_RESUME_PRINT "Продолжить печать"
#define MSG_STOP_PRINT "Остановить печать"
#define MSG_CARD_MENU "Обзор карты"
#define MSG_NO_CARD "Нет карты"
#define MSG_DWELL "Сон..."
#define MSG_USERWAIT "Ожиданиие"
#define MSG_RESUMING "Возобновление..."
#define MSG_PRINT_ABORTED "Отмена печати"
#define MSG_NO_MOVE "Нет движения."
#define MSG_KILLED "УБИТО."
#define MSG_STOPPED "ОСТАНОВЛЕНО."
#define MSG_CONTROL_RETRACT "Втягивание mm"
#define MSG_CONTROL_RETRACT_SWAP "Втяг. смены mm"
#define MSG_CONTROL_RETRACTF "Втягивание V"
#define MSG_CONTROL_RETRACT_ZLIFT "Втяг. прыжка mm"
#define MSG_CONTROL_RETRACT_RECOVER "Возврат +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Возврат смены +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "Возврат V"
#define MSG_AUTORETRACT "Авто Втягивание"
#define MSG_FILAMENTCHANGE "Смена прутка"
#define MSG_INIT_SDCARD "Иниц. карту"
#define MSG_CNG_SDCARD "Сменить карту"
#define MSG_ZPROBE_OUT "Z датчик вне стола"
#define MSG_POSITION_UNKNOWN "Паркуй X/Y перед Z"
#define MSG_ZPROBE_ZOFFSET "Смещение Z"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Сработал концевик"
#define MSG_END_HOUR "часов"
#define MSG_END_MINUTE "минут"
#if ENABLED(DELTA_CALIBRATION_MENU)
#define MSG_DELTA_CALIBRATE "Калибровка Delta"
#define MSG_DELTA_CALIBRATE_X "Калибровать X"
#define MSG_DELTA_CALIBRATE_Y "Калибровать Y"
#define MSG_DELTA_CALIBRATE_Z "Калибровать Z"
#define MSG_DELTA_CALIBRATE_CENTER "Калибровать Center"
#endif // DELTA_CALIBRATION_MENU
2015-06-28 04:20:32 +02:00
#endif // LANGUAGE_RU_H