2020-07-07 00:08:52 +02:00
|
|
|
/**
|
|
|
|
|
* Marlin 3D Printer Firmware
|
|
|
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
|
|
|
*
|
|
|
|
|
* This program is free software: you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
2020-07-23 05:20:14 +02:00
|
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
2020-07-07 00:08:52 +02:00
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
#pragma once
|
|
|
|
|
|
|
|
|
|
#if !defined(STM32F4) && !defined(STM32F4xx)
|
|
|
|
|
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
|
|
|
|
|
#elif HOTENDS > 2 || E_STEPPERS > 2
|
|
|
|
|
#error "LERDGE S supports up to 2 hotends / E-steppers."
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define BOARD_INFO_NAME "Lerdge S"
|
|
|
|
|
#define DEFAULT_MACHINE_NAME "LERDGE"
|
|
|
|
|
|
2020-08-22 08:22:14 +02:00
|
|
|
#define STEP_TIMER 4
|
|
|
|
|
#define TEMP_TIMER 2
|
2020-07-07 00:08:52 +02:00
|
|
|
|
|
|
|
|
//#define I2C_EEPROM
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Servos
|
|
|
|
|
//
|
|
|
|
|
#define SERVO0_PIN PD12 //confirmed
|
|
|
|
|
//#define SERVO1_PIN -1
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Limit Switches
|
|
|
|
|
//
|
|
|
|
|
#define X_MIN_PIN PG9 //confirmed
|
|
|
|
|
#define Y_MIN_PIN PG10 //confirmed
|
|
|
|
|
#define Z_MIN_PIN PG11 //confirmed
|
|
|
|
|
|
|
|
|
|
#define X_MAX_PIN PG12 //confirmed
|
|
|
|
|
#define Y_MAX_PIN PG13 //confirmed
|
|
|
|
|
#define Z_MAX_PIN PG14 //confirmed
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Filament runout
|
|
|
|
|
//
|
|
|
|
|
#define FIL_RUNOUT_PIN PC5 //confirmed
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Z Probe (when not Z_MIN_PIN)
|
|
|
|
|
//
|
|
|
|
|
#ifndef Z_MIN_PROBE_PIN
|
|
|
|
|
#define Z_MIN_PROBE_PIN PG8 //confirmed
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Steppers
|
|
|
|
|
//
|
|
|
|
|
#define X_STEP_PIN PF7 //confirmed
|
|
|
|
|
#define X_DIR_PIN PF8 //confirmed
|
|
|
|
|
#define X_ENABLE_PIN PF6 //confirmed
|
|
|
|
|
|
|
|
|
|
#define Y_STEP_PIN PF10 //confirmed
|
|
|
|
|
#define Y_DIR_PIN PF11 //confirmed
|
|
|
|
|
#define Y_ENABLE_PIN PF9 //confirmed
|
|
|
|
|
|
|
|
|
|
#define Z_STEP_PIN PF13 //confirmed
|
|
|
|
|
#define Z_DIR_PIN PF14 //confirmed
|
|
|
|
|
#define Z_ENABLE_PIN PF12 //confirmed
|
|
|
|
|
|
|
|
|
|
#define E0_STEP_PIN PG0 //confirmed
|
|
|
|
|
#define E0_DIR_PIN PG1 //confirmed
|
|
|
|
|
#define E0_ENABLE_PIN PF15 //confirmed
|
|
|
|
|
|
|
|
|
|
#define E1_STEP_PIN PG3 //confirmed
|
|
|
|
|
#define E1_DIR_PIN PG4 //confirmed
|
|
|
|
|
#define E1_ENABLE_PIN PG2 //confirmed
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Temperature Sensors
|
|
|
|
|
//
|
|
|
|
|
#define TEMP_0_PIN PC0 // See below for activation of thermistor readings
|
|
|
|
|
#define TEMP_1_PIN PC1 // See below for activation of thermistor readings
|
|
|
|
|
#define TEMP_BED_PIN PC3 //confirmed
|
|
|
|
|
|
|
|
|
|
// Lergde-S can choose thermocouple/thermistor mode in software.
|
|
|
|
|
// For use with thermistors, these pins must be OUT/LOW.
|
|
|
|
|
// This is done automatically.
|
|
|
|
|
#define TEMP_0_TR_ENABLE_PIN PF3
|
|
|
|
|
#define TEMP_1_TR_ENABLE_PIN PF4
|
|
|
|
|
|
|
|
|
|
// MAX6675 Cold-Junction-Compensated K-Thermocouple to Digital Converter (0°C to +1024°C)
|
|
|
|
|
// https://datasheets.maximintegrated.com/en/ds/MAX6675.pdf
|
|
|
|
|
|
|
|
|
|
#define MAX6675_SCK_PIN PB3 // max6675 datasheet: SCK pin, found with multimeter, not tested
|
|
|
|
|
#define MAX6675_DO_PIN PB4 // max6675 datasheet: SO pin, found with multimeter, not tested
|
|
|
|
|
#define MAX6675_SS_PIN PC4 // max6675 datasheet: /CS pin, found with multimeter, not tested and likely wrong
|
|
|
|
|
|
|
|
|
|
// Expansion board with second max6675
|
|
|
|
|
// Warning: Some boards leave the slot unpopulated.
|
|
|
|
|
|
|
|
|
|
//#define MAX6675_SCK2_PIN PB3 // max6675 datasheet: SCK pin, found with multimeter, not tested
|
|
|
|
|
//#define MAX6675_DO2_PIN PB4 // max6675 datasheet: SO pin, found with multimeter, not tested
|
|
|
|
|
//#define MAX6675_SS2_PIN PF1 // max6675 datasheet: /CS pin, found with multimeter, not tested
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Heaters / Fans
|
|
|
|
|
//
|
|
|
|
|
#define HEATER_0_PIN PA0 //confirmed
|
|
|
|
|
#define HEATER_1_PIN PA1 //confirmed
|
|
|
|
|
#define HEATER_BED_PIN PA3 //confirmed
|
|
|
|
|
|
|
|
|
|
#define FAN_PIN PA15 // heater 0 fan 1 //confirmed
|
|
|
|
|
#define FAN1_PIN PB10 // heater 1 fan 2 //confirmed
|
|
|
|
|
#define FAN2_PIN PF5 // heater 0 fan 2 and heater 1 fan 1 (two sockets, switched together) //confirmed
|
|
|
|
|
|
|
|
|
|
#ifndef E0_AUTO_FAN_PIN
|
|
|
|
|
#define E0_AUTO_FAN_PIN PF5
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Prusa i3 MK2 Multi Material Multiplexer Support
|
|
|
|
|
//
|
|
|
|
|
//#define E_MUX0_PIN -1
|
|
|
|
|
//#define E_MUX1_PIN -1
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// LED / Lighting
|
|
|
|
|
//
|
|
|
|
|
//Lerdge-S board has two LED connectors (this is the one on the mainboard)
|
|
|
|
|
#define CASE_LIGHT_PIN PC7 //confirmed
|
|
|
|
|
|
|
|
|
|
//on the dual extrusion addon board is a RGB connector
|
|
|
|
|
#define RGB_LED_R_PIN PC7 // Shared with the mainboard LED light connector (CASE_LIGHT_PIN), confirmed
|
|
|
|
|
#define RGB_LED_G_PIN PB0 //confirmed
|
|
|
|
|
#define RGB_LED_B_PIN PB1 //confirmed
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Misc. Functions
|
|
|
|
|
//
|
|
|
|
|
#define SDSS PC11 // SD is working using SDIO, not sure if this definition is needed?
|
|
|
|
|
#define LED_PIN PC6 // Mainboard soldered green LED, confirmed
|
|
|
|
|
#define PS_ON_PIN PB2 // Board has a power module connector, confirmed
|
|
|
|
|
#define KILL_PIN -1 // There is no reset button on the LCD
|
|
|
|
|
#define POWER_LOSS_PIN -1 // PB2 could be used for this as well
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// SD support
|
|
|
|
|
//
|
|
|
|
|
#define SDIO_SUPPORT
|
|
|
|
|
|
|
|
|
|
#define SCK_PIN PC12 //confirmed working
|
|
|
|
|
#define MISO_PIN PC8 //confirmed working
|
|
|
|
|
#define MOSI_PIN PD2 //confirmed working
|
|
|
|
|
#define SS_PIN PC11 //confirmed working
|
|
|
|
|
|
|
|
|
|
#define SD_DETECT_PIN PG15 //confirmed
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Persistent Storage
|
|
|
|
|
// If no option is selected below the SD Card will be used
|
|
|
|
|
// (this section modelled after pins_LONGER3D_LK.h)
|
|
|
|
|
// Warning: Not tested yet! Pins traced with multimeter, mistakes are possible
|
|
|
|
|
//#define SPI_EEPROM
|
|
|
|
|
|
|
|
|
|
#if ENABLED(SPI_EEPROM)
|
|
|
|
|
// Lerdge has an SPI EEPROM Winbond W25Q128 (128Mbits) https://www.pjrc.com/teensy/W25Q128FV.pdf
|
2020-08-22 08:22:14 +02:00
|
|
|
#define SPI_CHAN_EEPROM1 1
|
2020-07-07 00:08:52 +02:00
|
|
|
#define SPI_EEPROM1_CS PB12 // datasheet: /CS pin, found with multimeter, not tested
|
|
|
|
|
#define EEPROM_SCK PB13 // datasheet: CLK pin, found with multimeter, not tested
|
|
|
|
|
#define EEPROM_MISO PB14 // datasheet: DO pin, found with multimeter, not tested
|
|
|
|
|
#define EEPROM_MOSI PB15 // datasheet: DI pin, found with multimeter, not tested
|
2020-08-22 08:22:14 +02:00
|
|
|
#define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet)
|
2020-07-07 00:08:52 +02:00
|
|
|
#define MARLIN_EEPROM_SIZE 16UL * (EEPROM_PAGE_SIZE) // Limit to 64KB for now...
|
|
|
|
|
#else
|
2020-08-22 08:22:14 +02:00
|
|
|
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
|
2020-07-07 00:08:52 +02:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// LCD / Controller
|
|
|
|
|
//
|
|
|
|
|
|
|
|
|
|
// The LCD is initialized in FSMC mode
|
|
|
|
|
#define BEEPER_PIN PD13 //confirmed
|
|
|
|
|
|
|
|
|
|
#define BTN_EN1 PC14 //confirmed
|
|
|
|
|
#define BTN_EN2 PC15 //confirmed
|
|
|
|
|
#define BTN_ENC PC13 //confirmed
|
|
|
|
|
|
|
|
|
|
#define TFT_RESET_PIN PD6 //confirmed
|
|
|
|
|
#define TFT_BACKLIGHT_PIN PD3 //confirmed
|
|
|
|
|
|
|
|
|
|
#define TFT_CS_PIN PD7 // TFT works
|
|
|
|
|
#define TFT_RS_PIN PD11 // TFT works
|
|
|
|
|
|
|
|
|
|
// There is touch, but calibration is off
|
|
|
|
|
#define TOUCH_CS_PIN PB6
|
|
|
|
|
#define TOUCH_SCK_PIN PB3
|
|
|
|
|
#define TOUCH_MOSI_PIN PB5
|
|
|
|
|
#define TOUCH_MISO_PIN PB4
|
