Firmware2/Marlin/language_it.h

266 lines
15 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Italian
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_IT_H
#define LANGUAGE_IT_H
#define DISPLAY_CHARSET_ISO10646_1
2016-12-12 16:18:53 +01:00
#define WELCOME_MSG MACHINE_NAME _UxGT(" pronto.")
#define MSG_SD_INSERTED _UxGT("SD Card inserita")
#define MSG_SD_REMOVED _UxGT("SD Card rimossa")
#define MSG_LCD_ENDSTOPS _UxGT("Endstop")
#define MSG_MAIN _UxGT("Menu principale")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Disabilita Motori")
#define MSG_AUTO_HOME _UxGT("Auto Home")
#define MSG_AUTO_HOME_X _UxGT("Home asse X")
#define MSG_AUTO_HOME_Y _UxGT("Home asse Y")
#define MSG_AUTO_HOME_Z _UxGT("Home asse Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Home assi XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Premi per iniziare")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Punto successivo")
#define MSG_LEVEL_BED_DONE _UxGT("Livel. terminato!")
#define MSG_LEVEL_BED_CANCEL _UxGT("Annulla")
#define MSG_SET_HOME_OFFSETS _UxGT("Imp. offset home")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offset applicato")
#define MSG_SET_ORIGIN _UxGT("Imposta Origine")
#define MSG_PREHEAT_1 _UxGT("Preriscalda PLA")
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tutto")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Piatto")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf")
#define MSG_PREHEAT_2 _UxGT("Preriscalda ABS")
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tutto")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Piatto")
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" conf")
#define MSG_COOLDOWN _UxGT("Raffredda")
#define MSG_SWITCH_PS_ON _UxGT("Accendi aliment.")
#define MSG_SWITCH_PS_OFF _UxGT("Spegni aliment.")
#define MSG_EXTRUDE _UxGT("Estrudi")
#define MSG_RETRACT _UxGT("Ritrai")
#define MSG_MOVE_AXIS _UxGT("Muovi Asse")
#define MSG_LEVEL_BED _UxGT("Livella piano")
#define MSG_MOVE_X _UxGT("Muovi X")
#define MSG_MOVE_Y _UxGT("Muovi Y")
#define MSG_MOVE_Z _UxGT("Muovi Z")
#define MSG_MOVE_E _UxGT("Estrusore")
#define MSG_MOVE_01MM _UxGT("Muovi di 0.1mm")
#define MSG_MOVE_1MM _UxGT("Muovi di 1mm")
#define MSG_MOVE_10MM _UxGT("Muovi di 10mm")
#if ENABLED(DOGLCD)
2016-12-12 16:18:53 +01:00
#define MSG_SPEED _UxGT("Velocità")
#else
2016-12-12 16:18:53 +01:00
#define MSG_SPEED _UxGT("Velocita")
#endif
2016-12-12 16:18:53 +01:00
#define MSG_BED_Z _UxGT("piatto Z")
#define MSG_NOZZLE _UxGT("Ugello")
#define MSG_BED _UxGT("Piatto")
#if ENABLED(DOGLCD)
2016-12-12 16:18:53 +01:00
#define MSG_FAN_SPEED _UxGT("Velocità ventola")
#else
2016-12-12 16:18:53 +01:00
#define MSG_FAN_SPEED _UxGT("Velocita ventola")
#endif
2016-12-12 16:18:53 +01:00
#define MSG_FLOW _UxGT("Flusso")
#define MSG_CONTROL _UxGT("Controllo")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Fact")
#define MSG_AUTOTEMP _UxGT("Autotemp")
#define MSG_ON _UxGT("On ")
#define MSG_OFF _UxGT("Off")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Seleziona")
#define MSG_ACC _UxGT("Accel")
#define MSG_VX_JERK _UxGT("Vx-jerk")
#define MSG_VY_JERK _UxGT("Vy-jerk")
#define MSG_VZ_JERK _UxGT("Vz-jerk")
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#define MSG_AMAX _UxGT("Amax ")
#define MSG_A_RETRACT _UxGT("A-retract")
#define MSG_A_TRAVEL _UxGT("A-Spostamento")
#define MSG_XSTEPS _UxGT("Xpassi/mm")
#define MSG_YSTEPS _UxGT("Ypassi/mm")
#define MSG_ZSTEPS _UxGT("Zpassi/mm")
#define MSG_ESTEPS _UxGT("Epassi/mm")
#define MSG_E1STEPS _UxGT("E1passi/mm")
#define MSG_E2STEPS _UxGT("E2passi/mm")
#define MSG_E3STEPS _UxGT("E3passi/mm")
#define MSG_E4STEPS _UxGT("E4passi/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimento")
#define MSG_VOLUMETRIC _UxGT("Filamento")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Diam. filo")
#define MSG_CONTRAST _UxGT("Contrasto LCD")
#define MSG_STORE_EPROM _UxGT("Salva in memoria")
#define MSG_LOAD_EPROM _UxGT("Carica da memoria")
#define MSG_RESTORE_FAILSAFE _UxGT("Ripristina imp.")
#define MSG_REFRESH _UxGT("Aggiorna")
#define MSG_WATCH _UxGT("Guarda")
#define MSG_PREPARE _UxGT("Prepara")
#define MSG_TUNE _UxGT("Regola")
#define MSG_PAUSE_PRINT _UxGT("Pausa")
#define MSG_RESUME_PRINT _UxGT("Riprendi stampa")
#define MSG_STOP_PRINT _UxGT("Arresta stampa")
#define MSG_CARD_MENU _UxGT("Stampa da SD")
#define MSG_NO_CARD _UxGT("SD non presente")
#define MSG_DWELL _UxGT("Sospensione...")
#define MSG_USERWAIT _UxGT("Attendi Utente..")
#define MSG_RESUMING _UxGT("Riprendi Stampa")
#define MSG_PRINT_ABORTED _UxGT("Stampa annullata")
#define MSG_NO_MOVE _UxGT("Nessun Movimento")
#define MSG_KILLED _UxGT("UCCISO. ")
#define MSG_STOPPED _UxGT("ARRESTATO. ")
#define MSG_CONTROL_RETRACT _UxGT("Ritrai mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Scamb. Ritrai mm")
#define MSG_CONTROL_RETRACTF _UxGT("Ritrai V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Salta mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Scamb. UnRet mm")
2016-12-12 16:18:53 +01:00
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#define MSG_AUTORETRACT _UxGT("AutoRitrai")
#define MSG_FILAMENTCHANGE _UxGT("Cambia filamento")
#define MSG_INIT_SDCARD _UxGT("Iniz. SD-Card")
#define MSG_CNG_SDCARD _UxGT("Cambia SD-Card")
#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed")
#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch")
#define MSG_BLTOUCH_RESET _UxGT("Resetta BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("prima")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Finecorsa abort")
#define MSG_HEATING_FAILED_LCD _UxGT("Riscald. Fallito")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP RIDONDANTI")
#define MSG_THERMAL_RUNAWAY _UxGT("TEMP FUORI CONTROLLO")
#define MSG_ERR_MAXTEMP _UxGT("Err: TEMP MASSIMA")
#define MSG_ERR_MINTEMP _UxGT("Err: TEMP MINIMA")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMP MASSIMA PIATTO")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMP MINIMA PIATTO")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Vietato")
#define MSG_HALTED _UxGT("STAMPANTE FERMATA")
#define MSG_PLEASE_RESET _UxGT("Riavviare prego")
#define MSG_SHORT_DAY _UxGT("g") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Riscaldamento..")
#define MSG_HEATING_COMPLETE _UxGT("Risc. completato")
#define MSG_BED_HEATING _UxGT("Risc. Piatto..")
#define MSG_BED_DONE _UxGT("Piatto Pronto")
#define MSG_DELTA_CALIBRATE _UxGT("Calibraz. Delta")
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibra X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibra Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibra Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibra Center")
#define MSG_INFO_MENU _UxGT("Riguardo stampante")
#define MSG_INFO_PRINTER_MENU _UxGT("Info. stampante")
#define MSG_INFO_STATS_MENU _UxGT("Statistiche")
#define MSG_INFO_BOARD_MENU _UxGT("Info. scheda")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistori")
#define MSG_INFO_EXTRUDERS _UxGT("Estrusori")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protocollo")
#define MSG_LIGHTS_ON _UxGT("Luci Case on")
#define MSG_LIGHTS_OFF _UxGT("Luci Case off")
2016-11-18 05:17:14 +01:00
#if LCD_WIDTH >= 20
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_COUNT _UxGT("Contat. stampa")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completati")
#define MSG_INFO_PRINT_TIME _UxGT("Tempo totale")
#if ENABLED(DOGLCD)
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_LONGEST _UxGT("Lavoro più lungo")
#else
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_LONGEST _UxGT("Lavoro piu lungo")
#endif
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_FILAMENT _UxGT("Totale estruso")
2016-07-14 18:19:13 +02:00
#else
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_COUNT _UxGT("Stampe")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completati")
#define MSG_INFO_PRINT_TIME _UxGT("Durata")
#if ENABLED(DOGLCD)
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_LONGEST _UxGT("Più lungo")
#else
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_LONGEST _UxGT("Piu lungo")
#endif
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_FILAMENT _UxGT("Estruso")
2016-07-14 18:19:13 +02:00
#endif
2016-12-12 16:18:53 +01:00
#define MSG_INFO_MIN_TEMP _UxGT("Temp min")
#define MSG_INFO_MAX_TEMP _UxGT("Temp max")
#define MSG_INFO_PSU _UxGT("Alimentatore")
2016-07-14 18:19:13 +02:00
2016-12-12 16:18:53 +01:00
#define MSG_DRIVE_STRENGTH _UxGT("Potenza Drive")
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Scrivi DAC EEPROM")
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("CAMBIA FILAMENTO")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("CAMBIA OPZIONI:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Estrusione")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa")
2016-07-14 18:19:13 +02:00
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere avvio")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del cambio")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("di filamento")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("l'espulsione")
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("del filamento")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci il")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("filamento e")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("premi per cont")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("il caricamento")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("del filamento")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("l'estrusione")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("del filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa")
2016-07-14 18:19:13 +02:00
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Espulsione...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Caricamento...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Estrusione...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ripresa...")
2016-07-14 18:19:13 +02:00
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_IT_H