Firmware2/Marlin/src/pins/stm32/pins_ARMED.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

#ifndef STM32F4
  #error "Oops! Select an STM32F4 board in 'Tools > Board.'"
#elif HOTENDS > 2 || E_STEPPERS > 2
  #error "Arm'ed supports up to 2 hotends / E-steppers."
#endif

#ifndef ARMED_V1_0
  #define ARMED_V1_1
#endif

#undef BOARD_INFO_NAME // Defined on the command line by Arduino Core STM32
#define BOARD_INFO_NAME      "Arm'ed"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME

#define I2C_EEPROM

#undef E2END // Defined in Arduino Core STM32 to be used with EEPROM emulation. This board uses a real EEPROM.
#define E2END 0xFFF // 4KB

//
// Limit Switches
//
#define X_STOP_PIN         PE0
#define Y_STOP_PIN         PE1
#define Z_STOP_PIN         PE14

//
// Z Probe (when not Z_MIN_PIN)
//
//#ifndef Z_MIN_PROBE_PIN
//  #define Z_MIN_PROBE_PIN  PA4
//#endif

//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
  #define FIL_RUNOUT_PIN   PA3
#endif

//
// Steppers
//

#ifdef ARMED_SWAP_X_E1
  #define X_STEP_PIN       PE4
  #define X_DIR_PIN        PE2
  #define X_ENABLE_PIN     PE3
  #define X_CS_PIN         PE5
#else
  #define X_STEP_PIN       PD3
  #define X_DIR_PIN        PD2
  #define X_ENABLE_PIN     PD0
  #define X_CS_PIN         PD1
#endif

#define Y_STEP_PIN         PE11
#define Y_DIR_PIN          PE10
#define Y_ENABLE_PIN       PE13
#define Y_CS_PIN           PE12

#define Z_STEP_PIN         PD6
#define Z_DIR_PIN          PD7
#define Z_ENABLE_PIN       PD4
#define Z_CS_PIN           PD5

#define E0_STEP_PIN        PB5
#define E0_DIR_PIN         PB6
#ifdef ARMED_V1_1
  #define E0_ENABLE_PIN    PC12
#else
  #define E0_ENABLE_PIN    PB3
#endif
#define E0_CS_PIN          PB4

#ifdef ARMED_SWAP_X_E1
  #define E1_STEP_PIN      PD3
  #define E1_DIR_PIN       PD2
  #define E1_ENABLE_PIN    PD0
  #define E1_CS_PIN        PD1
#else
  #define E1_STEP_PIN      PE4
  #define E1_DIR_PIN       PE2
  #define E1_ENABLE_PIN    PE3
  #define E1_CS_PIN        PE5
#endif

//
// Temperature Sensors
//
#define TEMP_0_PIN         PC0   // Analog Input
#define TEMP_1_PIN         PC1   // Analog Input
#define TEMP_BED_PIN       PC2   // Analog Input

//
// Heaters / Fans
//
#define HEATER_0_PIN       PA1   // Hardware PWM
#define HEATER_1_PIN       PA2   // Hardware PWM
#define HEATER_BED_PIN     PA0   // Hardware PWM

#define FAN_PIN            PC6   // Hardware PWM, Part cooling fan
#define FAN1_PIN           PC7   // Hardware PWM, Extruder fan
#define FAN2_PIN           PC8   // Hardware PWM, Controller fan

//
// Misc functions
//
#define SDSS               PE7
#define LED_PIN            PB7   // Heart beat
#define PS_ON_PIN          PA10
#define KILL_PIN           PA8
#define PWR_LOSS           PA4   // Power loss / nAC_FAULT

//
// LCD / Controller
//
#define SD_DETECT_PIN      PA15
#define BEEPER_PIN         PC9

#if ENABLED(FYSETC_MINI_12864)
  //
  // See https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
  //
  #define DOGLCD_A0        PE9
  #define DOGLCD_CS        PE8

  #define LCD_BACKLIGHT_PIN -1

  #define LCD_RESET_PIN    PB12   // Must be high or open for LCD to operate normally.

  #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
    #ifndef RGB_LED_R_PIN
      #define RGB_LED_R_PIN PB13
    #endif
    #ifndef RGB_LED_G_PIN
      #define RGB_LED_G_PIN PB14
    #endif
    #ifndef RGB_LED_B_PIN
      #define RGB_LED_B_PIN PB15
    #endif
  #elif ENABLED(FYSETC_MINI_12864_2_1)
    #define NEOPIXEL_PIN   PB13
  #endif
#else
  #define LCD_PINS_RS      PE9
  #define LCD_PINS_ENABLE  PE8
  #define LCD_PINS_D4      PB12
  #define LCD_PINS_D5      PB13
  #define LCD_PINS_D6      PB14
  #define LCD_PINS_D7      PB15

  #if ENABLED(MKS_MINI_12864)
    #define DOGLCD_CS      PB13
    #define DOGLCD_A0      PB14
  #endif
#endif

#define BTN_EN1            PC4
#define BTN_EN2            PC5
#define BTN_ENC            PC3

//
// Extension pins
//
#define EXT0_PIN           PB0
#define EXT1_PIN           PB1
#define EXT2_PIN           PB2
#define EXT3_PIN           PD8
#define EXT4_PIN           PD9
#define EXT5_PIN           PD10
#define EXT6_PIN           PD11
#define EXT7_PIN           PD12
#define EXT8_PIN           PB10
#define EXT9_PIN           PB11