Firmware2/Marlin/src/pins/stm32/pins_FLYF407ZG.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

#if !defined(STM32F4) && !defined(STM32F4xx)
  #error "Oops! Select an STM32F4 board in 'Tools > Board.'"
#elif HOTENDS > 6 || E_STEPPERS > 6
  #error "FLYF407ZG supports up to 6 hotends / E-steppers."
#endif

#define BOARD_INFO_NAME      "FLYF407ZG"
#define BOARD_WEBSITE_URL    "github.com/FLYmaker/FLYF407ZG"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME

#undef E2END
#define E2END 0xFFF // 4KB

//
// Servos
//
#define SERVO0_PIN         PE11

//
// Limit Switches
//
#define X_MIN_PIN          PC3
#define X_MAX_PIN          PC2
#define Y_MIN_PIN          PF2
#define Y_MAX_PIN          PF1
#define Z_MIN_PIN          PF0
#define Z_MAX_PIN          PC15

//
// Z Probe (when not Z_MIN_PIN)
//
#define Z_MIN_PROBE_PIN    PC14   // Z3_PIN

//
// Steppers
//

#define X_STEP_PIN         PB9
#define X_DIR_PIN          PE0
#define X_ENABLE_PIN       PE1
#ifndef X_CS_PIN
  #define X_CS_PIN         PG13
#endif

#define Y_STEP_PIN         PB8
#define Y_DIR_PIN          PG11
#define Y_ENABLE_PIN       PG12
#ifndef Y_CS_PIN
  #define Y_CS_PIN         PG10
#endif

#define Z_STEP_PIN         PA8
#define Z_DIR_PIN          PD6
#define Z_ENABLE_PIN       PD7
#ifndef Z_CS_PIN
  #define Z_CS_PIN         PD5
#endif

#define E0_STEP_PIN        PC7
#define E0_DIR_PIN         PD3
#define E0_ENABLE_PIN      PD4
#ifndef E0_CS_PIN
  #define E0_CS_PIN        PD1
#endif

#define E1_STEP_PIN        PC6
#define E1_DIR_PIN         PA15
#define E1_ENABLE_PIN      PD0
#ifndef E1_CS_PIN
  #define E1_CS_PIN        PA14
#endif

#define E2_STEP_PIN        PD15
#define E2_DIR_PIN         PG7
#define E2_ENABLE_PIN      PG8
#ifndef E2_CS_PIN
  #define E2_CS_PIN        PG6
#endif

#define E3_STEP_PIN        PD14
#define E3_DIR_PIN         PG4
#define E3_ENABLE_PIN      PG5
#ifndef E3_CS_PIN
  #define E3_CS_PIN        PG3
#endif

#define E4_STEP_PIN        PD13
#define E4_DIR_PIN         PD11
#define E4_ENABLE_PIN      PG2
#ifndef E4_CS_PIN
  #define E4_CS_PIN        PD10
#endif

#define E5_STEP_PIN        PD12
#define E5_DIR_PIN         PD8
#define E5_ENABLE_PIN      PD9
#ifndef E5_CS_PIN
  #define E5_CS_PIN        PB12
#endif

//
// Temperature Sensors
//
#define TEMP_0_PIN         PA0   // Analog Input
#define TEMP_1_PIN         PC1   // Analog Input
#define TEMP_2_PIN         PC0   // Analog Input
#define TEMP_3_PIN         PF10  // Analog Input
#define TEMP_4_PIN         PF5   // Analog Input
#define TEMP_5_PIN         PF4   // Analog Input
#define TEMP_BED_PIN       PF3   // Analog Input

//
// Heaters / Fans
//
#define HEATER_0_PIN       PF7
#define HEATER_1_PIN       PF6
#define HEATER_2_PIN       PE6
#define HEATER_3_PIN       PE5
#define HEATER_4_PIN       PE4
#define HEATER_5_PIN       PA2
#define HEATER_BED_PIN     PE2

#ifndef FAN_PIN
  #define FAN_PIN          PF8
#endif
#define FAN1_PIN           PF9
#define FAN2_PIN           PE3
#define FAN3_PIN           PA1
#define FAN4_PIN           PE13
#define FAN5_PIN           PB11

//
// Trinamic Software SPI
//

#if ENABLED(TMC_USE_SW_SPI)
  #ifndef TMC_SW_MOSI
    #define TMC_SW_MOSI    PB15
  #endif
  #ifndef TMC_SW_MISO
    #define TMC_SW_MISO    PB14
  #endif
  #ifndef TMC_SW_SCK
    #define TMC_SW_SCK     PB13
  #endif
#endif

//
// Trinamic Software Serial
//

#if HAS_TMC220x
  #define X_SERIAL_TX_PIN  PG13
  #define X_SERIAL_RX_PIN  PG13

  #define Y_SERIAL_TX_PIN  PG10
  #define Y_SERIAL_RX_PIN  PG10

  #define Z_SERIAL_TX_PIN  PD5
  #define Z_SERIAL_RX_PIN  PD5

  #define E0_SERIAL_TX_PIN PD1
  #define E0_SERIAL_RX_PIN PD1

  #define E1_SERIAL_TX_PIN PA14
  #define E1_SERIAL_RX_PIN PA14

  #define E2_SERIAL_TX_PIN PG6
  #define E2_SERIAL_RX_PIN PG6

  #define E3_SERIAL_TX_PIN PG3
  #define E3_SERIAL_RX_PIN PG3

  #define E4_SERIAL_TX_PIN PD10
  #define E4_SERIAL_RX_PIN PD10

  #define E5_SERIAL_TX_PIN PB12
  #define E5_SERIAL_RX_PIN PB12

#endif


//
// LCD / Controller
//
#define SCK_PIN            PB13
#define MISO_PIN           PB14
#define MOSI_PIN           PB15
#define SDSS               PF11
#define SD_DETECT_PIN      PB2
#define BEEPER_PIN         PB10
#define LCD_PINS_RS        PE12
#define LCD_PINS_ENABLE    PE14
#define LCD_PINS_D4        PE10
#define LCD_PINS_D5        PE9
#define LCD_PINS_D6        PE8
#define LCD_PINS_D7        PE7
#define BTN_EN1            PC4
#define BTN_EN2            PC5
#define BTN_ENC            PE15

//
// Filament runout
//

#define FIL_RUNOUT_PIN     PA3

//
// ST7920 Delays
//
#ifndef ST7920_DELAY_1
  #define ST7920_DELAY_1 DELAY_NS(96)
#endif
#ifndef ST7920_DELAY_2
  #define ST7920_DELAY_2 DELAY_NS(48)
#endif
#ifndef ST7920_DELAY_3
  #define ST7920_DELAY_3 DELAY_NS(715)
#endif