Firmware2/Marlin/src/gcode/temp/M303.cpp

94 lines
2.9 KiB
C++
Raw Normal View History

/**
* Marlin 3D Printer Firmware
2020-02-03 15:00:57 +01:00
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
2019-06-28 06:57:50 +02:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
2020-07-23 05:20:14 +02:00
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_PID_HEATING
#include "../gcode.h"
2020-10-17 02:36:25 +02:00
#include "../../lcd/marlinui.h"
#include "../../module/temperature.h"
2020-01-04 04:00:44 +01:00
#if ENABLED(EXTENSIBLE_UI)
2020-03-13 22:29:29 +01:00
#include "../../lcd/extui/ui_api.h"
#elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)
#include "../../lcd/e3v2/enhanced/dwin.h"
2020-01-04 04:00:44 +01:00
#endif
/**
* M303: PID relay autotune
*
* S<temperature> Set the target temperature. (Default: 150C / 70C)
* E<extruder> Extruder number to tune, or -1 for the bed. (Default: E0)
* C<cycles> Number of times to repeat the procedure. (Minimum: 3, Default: 5)
* U<bool> Flag to apply the result to the current PID values
*
* With PID_DEBUG, PID_BED_DEBUG, or PID_CHAMBER_DEBUG:
* D Toggle PID debugging and EXIT without further action.
*/
void GcodeSuite::M303() {
#if ANY(PID_DEBUG, PID_BED_DEBUG, PID_CHAMBER_DEBUG)
if (parser.seen_test('D')) {
thermalManager.pid_debug_flag ^= true;
SERIAL_ECHO_START();
SERIAL_ECHOPGM("PID Debug ");
serialprintln_onoff(thermalManager.pid_debug_flag);
return;
}
#endif
const heater_id_t hid = (heater_id_t)parser.intval('E');
2021-04-24 02:14:49 +02:00
celsius_t default_temp;
switch (hid) {
#if ENABLED(PIDTEMP)
case 0 ... HOTENDS - 1: default_temp = PREHEAT_1_TEMP_HOTEND; break;
#endif
#if ENABLED(PIDTEMPBED)
case H_BED: default_temp = PREHEAT_1_TEMP_BED; break;
#endif
#if ENABLED(PIDTEMPCHAMBER)
case H_CHAMBER: default_temp = PREHEAT_1_TEMP_CHAMBER; break;
#endif
default:
SERIAL_ECHOLNPGM(STR_PID_BAD_HEATER_ID);
TERN_(EXTENSIBLE_UI, ExtUI::onPidTuning(ExtUI::result_t::PID_BAD_EXTRUDER_NUM));
TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_PidTuning(PID_BAD_EXTRUDER_NUM));
return;
}
2021-04-24 02:14:49 +02:00
const celsius_t temp = parser.celsiusval('S', default_temp);
const int c = parser.intval('C', 5);
const bool u = parser.boolval('U');
#if DISABLED(BUSY_WHILE_HEATING)
KEEPALIVE_STATE(NOT_BUSY);
#endif
2021-09-26 00:05:11 +02:00
LCD_MESSAGE(MSG_PID_AUTOTUNE);
thermalManager.PID_autotune(temp, hid, c, u);
2020-06-24 22:04:39 +02:00
ui.reset_status();
}
#endif // HAS_PID_HEATING