Firmware2/Marlin/src/lcd/dogm/HAL_LCD_class_defines.h

97 lines
3.5 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
2019-02-12 22:06:53 +01:00
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2018-10-23 23:00:34 +02:00
#pragma once
#include "../../inc/MarlinConfig.h"
// use this file to create the public interface for device drivers that are NOT in the U8G library
extern u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_sw_spi;
extern u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_hw_spi;
class U8GLIB_64128N_2X_HAL : public U8GLIB {
public:
U8GLIB_64128N_2X_HAL(pin_t sck, pin_t mosi, pin_t cs, pin_t a0, pin_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_64128n_HAL_2x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset)
{ }
U8GLIB_64128N_2X_HAL(pin_t cs, pin_t a0, pin_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7565_64128n_HAL_2x_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset)
{ }
};
extern u8g_dev_t u8g_dev_st7920_128x64_HAL_4x_sw_spi;
extern u8g_dev_t u8g_dev_st7920_128x64_HAL_4x_hw_spi;
class U8GLIB_ST7920_128X64_4X_HAL : public U8GLIB {
public:
U8GLIB_ST7920_128X64_4X_HAL(pin_t sck, pin_t mosi, pin_t cs, pin_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7920_128x64_HAL_4x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset) // a0 = U8G_PIN_NONE
{ }
U8GLIB_ST7920_128X64_4X_HAL(pin_t cs, pin_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7920_128x64_HAL_4x_hw_spi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset) // a0 = U8G_PIN_NONE
{ }
};
//
// AVR version uses ultralcd_st7920_u8glib_rrd_AVR.cpp
// HAL version uses u8g_dev_st7920_128x64_HAL.cpp
//
extern u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi;
class U8GLIB_ST7920_128X64_RRD : public U8GLIB {
public:
U8GLIB_ST7920_128X64_RRD(pin_t sck, pin_t mosi, pin_t cs, pin_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_st7920_128x64_rrd_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset) // a0 = U8G_PIN_NONE
{ }
};
extern u8g_dev_t u8g_dev_sh1106_128x64_2x_i2c_2_wire;
class U8GLIB_SH1106_128X64_2X_I2C_2_WIRE : public U8GLIB {
public:
U8GLIB_SH1106_128X64_2X_I2C_2_WIRE(uint8_t options = U8G_I2C_OPT_NONE)
: U8GLIB(&u8g_dev_sh1106_128x64_2x_i2c_2_wire, options)
{ }
};
extern u8g_dev_t u8g_dev_ssd1306_128x64_2x_i2c_2_wire;
class U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE : public U8GLIB {
public:
U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE(uint8_t options = U8G_I2C_OPT_NONE)
: U8GLIB(&u8g_dev_ssd1306_128x64_2x_i2c_2_wire, options)
{ }
};
//
// Very basic support for 320x240 TFT screen
// Tested on MKS Robin TFT_V2.0 with ST7789V controller
//
extern u8g_dev_t u8g_dev_tft_320x240_upscale_from_128x64;
class U8GLIB_TFT_320X240_UPSCALE_FROM_128X64 : public U8GLIB {
public:
U8GLIB_TFT_320X240_UPSCALE_FROM_128X64(uint8_t cs, uint8_t rs, uint8_t reset = U8G_PIN_NONE)
: U8GLIB(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset)
{ }
};