Firmware2/platformio.ini

627 lines
20 KiB
INI
Raw Normal View History

2016-07-03 15:33:24 +02:00
#
# Marlin Firmware
# PlatformIO Configuration File
#
# For detailed documentation with EXAMPLES:
2016-07-03 15:33:24 +02:00
#
# http://docs.platformio.org/en/latest/projectconf.html
#
# Automatic targets - enable auto-uploading
# targets = upload
2017-12-22 05:44:56 +01:00
#
# By default platformio build will abort after 5 errors.
# Remove '-fmax-errors=5' from build_flags below to see all.
#
2016-07-03 15:33:24 +02:00
[platformio]
2019-06-29 09:21:36 +02:00
src_dir = Marlin
boards_dir = buildroot/share/PlatformIO/boards
default_envs = megaatmega2560
2016-07-03 15:33:24 +02:00
[common]
default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py
2019-09-15 09:26:30 +02:00
build_flags = -fmax-errors=5 -g -D__MARLIN_FIRMWARE__
2017-06-17 23:19:42 +02:00
lib_deps =
2019-08-29 04:28:21 +02:00
U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
2018-06-12 07:40:18 +02:00
LiquidCrystal@1.3.4
TMCStepper@>=0.5.0,<1.0.0
Adafruit NeoPixel@1.1.3
2019-08-04 01:29:18 +02:00
LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip
Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip
2019-08-04 01:12:35 +02:00
SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
SailfishRGB_LED=https://github.com/mikeshub/SailfishRGB_LED/archive/master.zip
SlowSoftI2CMaster=https://github.com/mikeshub/SlowSoftI2CMaster/archive/master.zip
2017-12-22 05:44:56 +01:00
#################################
# #
# Unique Core Architectures #
# #
# Add a new "env" below if no #
# entry has values suitable to #
# build for a given board. #
# #
#################################
#
# ATmega2560
#
2017-05-09 18:28:39 +02:00
[env:megaatmega2560]
platform = atmelavr
framework = arduino
board = megaatmega2560
build_flags = ${common.build_flags}
board_build.f_cpu = 16000000L
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
2016-07-03 15:33:24 +02:00
#
# ATmega1280
#
2017-05-09 18:28:39 +02:00
[env:megaatmega1280]
platform = atmelavr
framework = arduino
board = megaatmega1280
build_flags = ${common.build_flags}
board_build.f_cpu = 16000000L
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
#
# AT90USB1286 boards using CDC bootloader
# - BRAINWAVE
# - BRAINWAVE_PRO
# - SAV_MKI
# - TEENSYLU
#
[env:at90usb1286_cdc]
platform = teensy
framework = arduino
board = at90usb1286
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
#
# AT90USB1286 boards using DFU bootloader
# - PrintrBoard
# - PrintrBoard Rev.F
# - ? 5DPRINT ?
#
[env:at90usb1286_dfu]
platform = teensy
framework = arduino
board = at90usb1286
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
#
# Due (Atmel SAM3X8E ARM Cortex-M3)
#
# - RAMPS4DUE
# - RADDS
#
[env:DUE]
2018-05-19 23:59:23 +02:00
platform = atmelsam
framework = arduino
board = due
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter} +<src/HAL/HAL_DUE>
2018-05-19 23:59:23 +02:00
monitor_speed = 250000
[env:DUE_USB]
2018-05-19 23:59:23 +02:00
platform = atmelsam
framework = arduino
board = dueUSB
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter} +<src/HAL/HAL_DUE>
2018-05-19 23:59:23 +02:00
monitor_speed = 250000
[env:DUE_debug]
# Used when WATCHDOG_RESET_MANUAL is enabled
2018-05-19 23:59:23 +02:00
platform = atmelsam
framework = arduino
board = due
build_flags = ${common.build_flags}
-funwind-tables
-mpoke-function-name
2018-05-19 23:59:23 +02:00
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter} +<src/HAL/HAL_DUE>
2018-05-19 23:59:23 +02:00
monitor_speed = 250000
2017-06-17 23:19:42 +02:00
#
# NXP LPC176x ARM Cortex-M3
#
[env:LPC1768]
platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/master.zip
framework = arduino
board = nxp_lpc1768
2019-09-15 09:26:30 +02:00
build_flags = -DTARGET_LPC1768 -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
# debug options for backtrace
# -funwind-tables
# -mpoke-function-name
lib_ldf_mode = off
lib_compat_mode = strict
extra_scripts = Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py
src_filter = ${common.default_src_filter} +<src/HAL/HAL_LPC1768>
monitor_speed = 250000
lib_deps = Servo
LiquidCrystal
2019-08-29 04:28:21 +02:00
U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
TMCStepper@>=0.5.0,<1.0.0
2019-03-07 00:54:19 +01:00
Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/master.zip
2019-08-04 01:12:35 +02:00
SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
[env:LPC1769]
platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/master.zip
framework = arduino
board = nxp_lpc1769
2019-01-28 06:11:34 +01:00
build_flags = -DTARGET_LPC1768 -DLPC1769 -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
# debug options for backtrace
# -funwind-tables
# -mpoke-function-name
lib_ldf_mode = off
lib_compat_mode = strict
extra_scripts = Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py
src_filter = ${common.default_src_filter} +<src/HAL/HAL_LPC1768>
monitor_speed = 250000
lib_deps = Servo
LiquidCrystal
2019-08-29 04:28:21 +02:00
U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
TMCStepper@>=0.5.0,<1.0.0
2019-03-07 00:54:19 +01:00
Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/master.zip
#
# Melzi and clones (ATmega1284p)
#
[env:melzi]
2018-05-19 23:59:23 +02:00
platform = atmelavr
framework = arduino
board = sanguino_atmega1284p
build_flags = ${common.build_flags} -fmerge-all-constants
2018-05-19 23:59:23 +02:00
upload_speed = 57600
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
lib_ignore = TMCStepper
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
2018-05-19 23:59:23 +02:00
monitor_speed = 250000
#
# Melzi and clones (Optiboot bootloader)
#
[env:melzi_optiboot]
2018-05-19 23:59:23 +02:00
platform = atmelavr
framework = arduino
board = sanguino_atmega1284p
build_flags = ${common.build_flags}
upload_speed = 115200
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
lib_ignore = TMCStepper
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
2018-05-19 23:59:23 +02:00
monitor_speed = 250000
2017-11-08 21:08:09 +01:00
#
# RAMBo
#
[env:rambo]
platform = atmelavr
framework = arduino
board = reprap_rambo
build_flags = ${common.build_flags}
board_build.f_cpu = 16000000L
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
2017-11-08 21:08:09 +01:00
#
# Sanguinololu (ATmega644p)
#
[env:sanguino_atmega644p]
2018-05-19 23:59:23 +02:00
platform = atmelavr
framework = arduino
board = sanguino_atmega644p
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
2018-05-19 23:59:23 +02:00
monitor_speed = 250000
#
# Sanguinololu (ATmega1284p)
#
[env:sanguino_atmega1284p]
2018-05-19 23:59:23 +02:00
platform = atmelavr
framework = arduino
board = sanguino_atmega1284p
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
2018-05-19 23:59:23 +02:00
monitor_speed = 250000
2017-11-08 21:08:09 +01:00
#
# STM32F103RE
#
[env:STM32F103RE]
2019-05-12 01:10:40 +02:00
platform = ststm32
2018-05-19 23:59:23 +02:00
framework = arduino
board = genericSTM32F103RE
2019-09-03 02:49:58 +02:00
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
${common.build_flags} -std=gnu++14
-DDEBUG_LEVEL=0
build_unflags = -std=gnu++11
2018-05-19 23:59:23 +02:00
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, SPI
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
2018-05-19 23:59:23 +02:00
monitor_speed = 250000
2017-11-08 21:08:09 +01:00
#
# STM32F103RC_fysetc
#
[env:STM32F103RC_fysetc]
platform = ststm32
framework = arduino
board = genericSTM32F103RC
#board_build.core = maple
platform_packages = tool-stm32duino
extra_scripts = buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
2019-09-03 02:49:58 +02:00
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
${common.build_flags} -std=gnu++14
-DDEBUG_LEVEL=0 -DHAVE_SW_SERIAL
build_unflags = -std=gnu++11
lib_deps = ${common.lib_deps}
2019-08-04 01:12:35 +02:00
SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
lib_ignore = Adafruit NeoPixel, SPI
lib_ldf_mode = chain
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
monitor_speed = 250000
debug_tool = stlink
upload_protocol = serial
2019-06-11 04:10:51 +02:00
#
2019-07-18 12:43:49 +02:00
# BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3)
2019-06-11 04:10:51 +02:00
#
[env:STM32F103RC_bigtree]
platform = ststm32
framework = arduino
board = genericSTM32F103RC
platform_packages = tool-stm32duino
extra_scripts = buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
2019-09-03 02:49:58 +02:00
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
${common.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14
build_unflags = -std=gnu++11
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, SPI
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
monitor_speed = 115200
upload_protocol = stlink
debug_tool = stlink
[env:STM32F103RC_bigtree_USB]
platform = ststm32
framework = arduino
board = genericSTM32F103RC
platform_packages = tool-stm32duino
extra_scripts = buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
${common.build_flags} -DDEBUG_LEVEL=0 -DUSE_USB_COMPOSITE -std=gnu++14
build_unflags = -std=gnu++11
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, SPI
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
monitor_speed = 115200
upload_protocol = stlink
debug_tool = stlink
2019-06-11 04:10:51 +02:00
#
2019-07-10 06:54:34 +02:00
# STM32F4 with STM32GENERIC
#
2018-04-18 00:33:29 +02:00
[env:STM32F4]
2018-05-19 23:59:23 +02:00
platform = ststm32
framework = arduino
board = disco_f407vg
build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F4 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB
2018-05-19 23:59:23 +02:00
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
lib_ignore = Adafruit NeoPixel, TMCStepper
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32_F4_F7> -<src/HAL/HAL_STM32_F4_F7/STM32F7>
2019-07-10 06:54:34 +02:00
monitor_speed = 250000
#
# STM32F7 with STM32GENERIC
#
[env:STM32F7]
platform = ststm32
framework = arduino
board = remram_v1
build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F7 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB
2019-07-10 06:54:34 +02:00
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
lib_ignore = Adafruit NeoPixel, TMCStepper
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32_F4_F7> -<src/HAL/HAL_STM32_F4_F7/STM32F4>
2018-05-19 23:59:23 +02:00
monitor_speed = 250000
2018-04-18 00:33:29 +02:00
#
2019-03-13 06:48:08 +01:00
# ARMED (STM32)
#
[env:ARMED]
platform = ststm32
framework = arduino
board = armed_v1
build_flags = ${common.build_flags} -DUSBCON -DUSBD_VID=0x0483 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="ARMED_V1"' -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
lib_ignore = Adafruit NeoPixel
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
monitor_speed = 250000
#
# Longer 3D board in Alfawise U20 (STM32F103VET6)
#
[env:STM32F103VE_longer]
platform = ststm32
framework = arduino
board = genericSTM32F103VE
monitor_speed = 250000
extra_scripts = buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py
2019-09-03 02:49:58 +02:00
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
${common.build_flags} -std=gnu++14 -USERIAL_USB
-DSTM32F1xx -DU20 -DTS_V12
build_unflags = -std=gnu++11 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, LiquidTWI2, SPI
#
# MKS Robin (STM32F103ZET6)
#
[env:mks_robin]
platform = ststm32
framework = arduino
board = genericSTM32F103ZE
extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin.py
2019-09-03 02:49:58 +02:00
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
${common.build_flags} -std=gnu++14
build_unflags = -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, SPI
#
# MKS ROBIN LITE/LITE2 (STM32F103RCT6)
#
[env:mks_robin_lite]
platform = ststm32
framework = arduino
board = genericSTM32F103RC
extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_lite.py
2019-09-03 02:49:58 +02:00
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
${common.build_flags} -std=gnu++14
build_unflags = -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, SPI
2019-06-24 10:42:22 +02:00
#
2019-06-28 04:33:41 +02:00
# MKS Robin Mini (STM32F103VET6)
2019-06-24 10:42:22 +02:00
#
[env:mks_robin_mini]
platform = ststm32
framework = arduino
board = genericSTM32F103VE
extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_mini.py
2019-09-03 02:49:58 +02:00
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
2019-06-24 10:42:22 +02:00
${common.build_flags} -std=gnu++14
build_unflags = -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, SPI
2019-06-24 10:42:22 +02:00
2019-06-28 04:33:41 +02:00
#
# MKS Robin Nano (STM32F103VET6)
#
[env:mks_robin_nano]
platform = ststm32
framework = arduino
board = genericSTM32F103VE
extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_nano.py
2019-09-03 02:49:58 +02:00
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
2019-06-28 04:33:41 +02:00
${common.build_flags} -std=gnu++14
build_unflags = -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, SPI
2019-06-28 04:33:41 +02:00
#
# JGAurora A5S A1 (STM32F103ZET6)
#
[env:jgaurora_a5s_a1]
platform = ststm32
framework = arduino
board = genericSTM32F103ZE
extra_scripts = buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
2019-09-03 02:49:58 +02:00
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
${common.build_flags} -DSTM32F1xx -std=gnu++14
build_unflags = -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, SPI
monitor_speed = 250000
#
# STM32F407VET6 with RAMPS-like shield
# 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
# Shield - https://github.com/jmz52/Hardware
#
2019-09-03 02:49:58 +02:00
[env:STM32F407VE_black]
platform = ststm32@5.4.3
framework = arduino
board = blackSTM32F407VET6
extra_scripts = pre:buildroot/share/PlatformIO/scripts/black_stm32f407vet6.py
build_flags = ${common.build_flags}
-DSTM32F4 -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"BLACK_F407VE\"
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
lib_ignore = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
monitor_speed = 250000
#
# Bigtreetech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
#
[env:BIGTREE_SKR_PRO]
platform = ststm32
framework = arduino
board = BigTree_SKR_Pro
extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
build_flags = ${common.build_flags}
-DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407ZG\"
-DTARGET_STM32F4 -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 -DHAVE_HWSERIAL6
2019-09-19 00:06:01 +02:00
lib_deps =
U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
LiquidCrystal@1.3.4
TMCStepper@>=0.5.0,<1.0.0
2019-09-19 00:06:01 +02:00
Adafruit NeoPixel
LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip
Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
monitor_speed = 250000
2019-08-20 10:05:12 +02:00
#
# BIGTREE_SKR_BTT002 (STM32F407VET6 ARM Cortex-M4)
#
[env:BIGTREE_BTT002]
platform = ststm32
2019-08-20 10:05:12 +02:00
framework = arduino
2019-08-21 06:45:38 +02:00
board = BigTree_Btt002
2019-08-20 10:05:12 +02:00
extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
build_flags = ${common.build_flags}
-DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407VE\"
-DTARGET_STM32F4 -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
-DHAVE_HWSERIAL2
-DHAVE_HWSERIAL3
-DPIN_SERIAL2_RX=PD_6
-DPIN_SERIAL2_TX=PD_5
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
monitor_speed = 250000
2019-08-02 14:22:07 +02:00
#
# Teensy 3.1 / 3.2 (ARM Cortex-M4)
#
[env:teensy31]
platform = teensy
framework = arduino
board = teensy31
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
2019-08-02 14:22:07 +02:00
lib_ignore = Adafruit NeoPixel
src_filter = ${common.default_src_filter} +<src/HAL/HAL_TEENSY31_32>
monitor_speed = 250000
2017-11-08 21:08:09 +01:00
#
# Teensy 3.5 / 3.6 (ARM Cortex-M4)
#
[env:teensy35]
2018-05-19 23:59:23 +02:00
platform = teensy
framework = arduino
board = teensy35
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
2018-05-19 23:59:23 +02:00
lib_ignore = Adafruit NeoPixel
src_filter = ${common.default_src_filter} +<src/HAL/HAL_TEENSY35_36>
2018-05-19 23:59:23 +02:00
monitor_speed = 250000
2019-03-13 06:48:08 +01:00
#
# Malyan M200 (STM32F103CB)
2019-03-13 06:48:08 +01:00
#
[env:STM32F103CB_malyan]
platform = ststm32
framework = arduino
board = malyanM200
2019-09-03 02:49:58 +02:00
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
2019-09-15 09:26:30 +02:00
-DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
#-<frameworks>
lib_ignore = Adafruit NeoPixel, LiquidCrystal, LiquidTWI2, TMCStepper, U8glib-HAL, SPI
2017-10-08 18:38:10 +02:00
#
# Espressif ESP32
#
[env:esp32]
platform = espressif32
board = esp32dev
framework = arduino
upload_speed = 115200
monitor_speed = 115200
2019-03-13 06:48:08 +01:00
upload_port = /dev/ttyUSB0
lib_deps =
2019-08-04 01:12:35 +02:00
AsyncTCP=https://github.com/me-no-dev/AsyncTCP/archive/master.zip
ESPAsyncWebServer=https://github.com/me-no-dev/ESPAsyncWebServer/archive/master.zip
2019-08-20 10:05:12 +02:00
lib_ignore = LiquidCrystal, LiquidTWI2, SailfishLCD, SailfishRGB_LED
src_filter = ${common.default_src_filter} +<src/HAL/HAL_ESP32>
#
# FYSETC F6 V1.3
#
[env:fysetc_f6_13]
platform = atmelavr
framework = arduino
board = fysetc_f6_13
build_flags = ${common.build_flags}
board_build.f_cpu = 16000000L
lib_deps = ${common.lib_deps}
2019-08-19 03:49:33 +02:00
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
2019-02-23 02:09:10 +01:00
#
# Native
# No supported Arduino libraries, base Marlin only
#
[env:linux_native]
platform = native
2019-09-15 09:26:30 +02:00
build_flags = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__
2019-02-23 02:09:10 +01:00
src_build_flags = -Wall -IMarlin/src/HAL/HAL_LINUX/include
build_unflags = -Wall
lib_ldf_mode = off
lib_deps =
extra_scripts =
src_filter = ${common.default_src_filter} +<src/HAL/HAL_LINUX>
2019-07-28 21:48:29 +02:00
#
# Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4)
#
2019-09-03 02:49:58 +02:00
[env:SAMD51_grandcentral_m4]
2019-07-28 21:48:29 +02:00
platform = atmelsam
board = adafruit_grandcentral_m4
framework = arduino
2019-08-07 07:45:00 +02:00
build_flags = ${common.build_flags} -std=gnu++17
extra_scripts = ${common.extra_scripts}
2019-08-07 07:45:00 +02:00
build_unflags = -std=gnu++11
2019-07-28 21:48:29 +02:00
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter} +<src/HAL/HAL_SAMD51>
2019-08-07 07:45:00 +02:00
debug_tool = jlink
2019-08-28 03:50:48 +02:00
#
# Just print the dependency tree
#
[env:include_tree]
platform = atmelavr
framework = arduino
board = megaatmega2560
2019-09-15 09:26:30 +02:00
build_flags = -c -H -std=gnu++11 -Wall -Os -D__MARLIN_FIRMWARE__
2019-08-28 03:50:48 +02:00
lib_deps = ${common.lib_deps}
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = +<src/Marlin.cpp>