Firmware2/Marlin/src/pins/pins_SILVER_GATE.h

95 lines
2.6 KiB
C
Raw Normal View History

/**
2017-10-27 10:42:04 +02:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2017-11-03 10:07:45 +01:00
#if !defined(__AVR_ATmega1281__) && !defined(__AVR_ATmega2561__)
2017-10-27 10:42:04 +02:00
#error Oops! Make sure you have 'Silvergate' selected from the 'Tools -> Boards' menu.
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "Silver Gate"
#endif
#define X_STEP_PIN 43
#define X_DIR_PIN 44
#define X_ENABLE_PIN 42
#define X_MIN_PIN 31
#define X_MAX_PIN 34
#define Y_STEP_PIN 40
#define Y_DIR_PIN 41
#define Y_ENABLE_PIN 39
#define Y_MIN_PIN 32
#define Y_MAX_PIN 35
#define Z_STEP_PIN 13
#define Z_DIR_PIN 38
#define Z_ENABLE_PIN 14
#define Z_MIN_PIN 33
#define Z_MAX_PIN 36
#define E0_STEP_PIN 27
#define E0_DIR_PIN 37
#define E0_ENABLE_PIN 45
#define SDSS 16
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 34 // X_MAX unless overridden
#endif
#ifndef FAN_PIN
#define FAN_PIN 5
#endif
2017-10-27 10:42:04 +02:00
#define HEATER_0_PIN 7
2018-03-28 19:51:59 +02:00
#define ORIG_E0_AUTO_FAN_PIN 3 // Use this by NOT overriding E0_AUTO_FAN_PIN
2017-10-27 10:42:04 +02:00
#define CONTROLLER_FAN_PIN 2
#define TEMP_0_PIN 7 // Analog Input
#define HEATER_BED_PIN 8
#define TEMP_BED_PIN 6
#if ENABLED(DOGLCD)
2017-11-03 10:07:45 +01:00
#if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920
2017-10-27 10:42:04 +02:00
#define LCD_PINS_RS 30
#define LCD_PINS_ENABLE 20
#define LCD_PINS_D4 25
#define BEEPER_PIN 29
#define BTN_EN1 19
#define BTN_EN2 22
#define BTN_ENC 24
#define LCD_BACKLIGHT_PIN 6
2017-11-03 10:07:45 +01:00
#if ENABLED(SILVER_GATE_GLCD_CONTROLLER)
2017-10-27 10:42:04 +02:00
#define KILL_PIN 21
#define HOME_PIN 28
#endif
#endif
#endif
#define SD_DETECT_PIN 15
2017-11-03 10:07:45 +01:00
2017-10-27 10:42:04 +02:00
#define STAT_LED_RED_PIN 23
#define STAT_LED_BLUE_PIN 26
#define CASE_LIGHT_PIN 51