Firmware2/frameworks/CMSIS/LPC1768/include/lpc17xx_iap.h

154 lines
5.0 KiB
C
Raw Normal View History

2017-06-17 23:19:42 +02:00
/**********************************************************************
* $Id$ lpc17xx_iap.h 2012-04-18
*//**
* @file lpc17xx_iap.h
* @brief Contains all functions support for IAP
* on lpc17xx
* @version 1.0
* @date 18. April. 2012
* @author NXP MCU SW Application Team
*
* Copyright(C) 2011, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors'
* relevant copyright in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
**********************************************************************/
#ifndef _LPC17xx_IAP_H
#define _LPC17xx_IAP_H
#include "lpc_types.h"
/** @defgroup IAP IAP (In Application Programming)
* @ingroup LPC1700CMSIS_FwLib_Drivers
* @{
*/
/** @defgroup IAP_Public_Macros IAP Public Macros
* @{
*/
/** IAP entry location */
#define IAP_LOCATION (0x1FFF1FF1UL)
/**
* @}
*/
/** @defgroup IAP_Public_Types IAP Public Types
* @{
*/
/**
* @brief IAP command code definitions
*/
typedef enum
{
IAP_PREPARE = 50, // Prepare sector(s) for write operation
IAP_COPY_RAM2FLASH = 51, // Copy RAM to Flash
IAP_ERASE = 52, // Erase sector(s)
IAP_BLANK_CHECK = 53, // Blank check sector(s)
IAP_READ_PART_ID = 54, // Read chip part ID
IAP_READ_BOOT_VER = 55, // Read chip boot code version
IAP_COMPARE = 56, // Compare memory areas
IAP_REINVOKE_ISP = 57, // Reinvoke ISP
IAP_READ_SERIAL_NUMBER = 58, // Read serial number
} IAP_COMMAND_CODE;
/**
* @brief IAP status code definitions
*/
typedef enum
{
CMD_SUCCESS, // Command is executed successfully.
INVALID_COMMAND, // Invalid command.
SRC_ADDR_ERROR, // Source address is not on a word boundary.
DST_ADDR_ERROR, // Destination address is not on a correct boundary.
SRC_ADDR_NOT_MAPPED, // Source address is not mapped in the memory map.
DST_ADDR_NOT_MAPPED, // Destination address is not mapped in the memory map.
COUNT_ERROR, // Byte count is not multiple of 4 or is not a permitted value.
INVALID_SECTOR, // Sector number is invalid.
SECTOR_NOT_BLANK, // Sector is not blank.
SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION, // Command to prepare sector for write operation was not executed.
COMPARE_ERROR, // Source and destination data is not same.
BUSY, // Flash programming hardware interface is busy.
} IAP_STATUS_CODE;
/**
* @brief IAP write length definitions
*/
typedef enum {
IAP_WRITE_256 = 256,
IAP_WRITE_512 = 512,
IAP_WRITE_1024 = 1024,
IAP_WRITE_4096 = 4096,
} IAP_WRITE_SIZE;
/**
* @brief IAP command structure
*/
typedef struct {
uint32_t cmd; // Command
uint32_t param[4]; // Parameters
uint32_t status; // status code
uint32_t result[4]; // Result
} IAP_COMMAND_Type;
/**
* @}
*/
/* Public Functions ----------------------------------------------------------- */
/** @defgroup IAP_Public_Functions IAP Public Functions
* @{
*/
/** Get sector number of an address */
uint32_t GetSecNum (uint32_t adr);
/** Prepare sector(s) for write operation */
IAP_STATUS_CODE PrepareSector(uint32_t start_sec, uint32_t end_sec);
/** Copy RAM to Flash */
IAP_STATUS_CODE CopyRAM2Flash(uint8_t * dest, uint8_t* source, IAP_WRITE_SIZE size);
/** Prepare sector(s) for write operation */
IAP_STATUS_CODE EraseSector(uint32_t start_sec, uint32_t end_sec);
/** Blank check sectors */
IAP_STATUS_CODE BlankCheckSector(uint32_t start_sec, uint32_t end_sec,
uint32_t *first_nblank_loc,
uint32_t *first_nblank_val);
/** Read part identification number */
IAP_STATUS_CODE ReadPartID(uint32_t *partID);
/** Read boot code version */
IAP_STATUS_CODE ReadBootCodeVer(uint8_t *major, uint8_t* minor);
/** Read Device serial number */
IAP_STATUS_CODE ReadDeviceSerialNum(uint32_t *uid);
/** Compare memory */
IAP_STATUS_CODE Compare(uint8_t *addr1, uint8_t *addr2, uint32_t size);
/** Invoke ISP */
void InvokeISP(void);
/**
* @}
*/
/**
* @}
*/
#endif /*_LPC17xx_IAP_H*/