Firmware2/Marlin/language_kana_utf8.h

140 lines
10 KiB
C
Raw Normal View History

/**
* Japanese (Kana UTF8 version)
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_KANA_UTF_H
#define LANGUAGE_KANA_UTF_H
#define MAPPER_E382E383
// This is very crude replacement of the codes used in language_kana.h from somebody who really does not know what he is doing.
// Just to show the potential benefit of unicode.
// This translation can be improved by using the full charset of unicode codeblock U+30A0 to U+30FF.
// 片仮名表示定義
#define WELCOME_MSG MACHINE_NAME " ready."
#define MSG_SD_INSERTED "セート゛ ンウニユウアレマシタ" // "Card inserted"
#define MSG_SD_REMOVED "セート゛セ゛アリマセン" // "Card removed"
#define MSG_MAIN "ナイン" // "Main"
#define MSG_AUTOSTART "シ゛ト゛ウセイシ" // "Autostart"
#define MSG_DISABLE_STEPPERS "モーターテ゛ンケ゛ン オフ" // "Disable steppers"
#define MSG_AUTO_HOME "ケ゛ンテンニイト゛ウ" // "Auto home"
#define MSG_SET_HOME_OFFSETS "キシ゛ユンオフセツトセツテイ" // "Set home offsets"
#define MSG_SET_ORIGIN "キシ゛ユンセツト" // "Set origin"
#define MSG_PREHEAT_PLA "PLA ヨネシ" // "Preheat PLA"
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " "
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " スヘ゛テ" // " All"
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " ヘ゛ツト゛" // "Bed"
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " セツテイ" // "conf"
#define MSG_PREHEAT_ABS "ABS ヨネシ" // "Preheat ABS"
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " "
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " スヘ゛テ" // " All"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " ヘ゛ツト゛" // "Bed"
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " セツテイ" // "conf"
#define MSG_COOLDOWN "セネシテイシ" // "Cooldown"
#define MSG_SWITCH_PS_ON "テ゛ンケン゛ オン" // "Switch power on"
#define MSG_SWITCH_PS_OFF "テ゛ンケン゛ オフ" // "Switch power off"
#define MSG_EXTRUDE "オシタ゛シ" // "Extrude"
#define MSG_RETRACT "リトラケト" // "Retract"
#define MSG_MOVE_AXIS "シ゛ケイト゛ウ" // "Move axis"
#define MSG_MOVE_X "Xシ゛ケ イト゛ウ" // "Move X"
#define MSG_MOVE_Y "Yシ゛ケ イト゛ウ" // "Move Y"
#define MSG_MOVE_Z "Zシ゛ケ イト゛ウ" // "Move Z"
#define MSG_MOVE_E "エケストルータ゛ー" // "Extruder"
#define MSG_MOVE_01MM "0.1mm イト゛ウ" // "Move 0.1mm"
#define MSG_MOVE_1MM " 1mm イト゛ウ" // "Move 1mm"
#define MSG_MOVE_10MM " 10mm イト゛ウ" // "Move 10mm"
#define MSG_SPEED "スヒ゜ート゛" // "Speed"
#define MSG_NOZZLE "ノス゛ル" // "Nozzle"
#define MSG_BED "ヘ゛ツト゛" // "Bed"
#define MSG_FAN_SPEED "ファンンケト゛" // "Fan speed"
#define MSG_FLOW "オケリリョウ" // "Flow"
#define MSG_CONTROL "コントロール" // "Control"
#define MSG_MIN LCD_STR_THERMOMETER " Min"
#define MSG_MAX LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR LCD_STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "シ゛ト゛ウオント゛" // "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "センケト゛" // "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_TEMPERATURE "オント゛" // "Temperature"
#define MSG_MOTION "ウコ゛キセツテイ" // "Motion"
#define MSG_VOLUMETRIC "フィラナント" // "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4"
#define MSG_CONTRAST "LCDコントラスト" // "LCD contrast"
#define MSG_STORE_EPROM "ナモリヘセケノウ" // "Store memory"
#define MSG_LOAD_EPROM "ナモリセラヨミbaミ" // "Load memory"
#define MSG_RESTORE_FAILSAFE "セツテイリセツト" // "Restore failsafe"
#define MSG_REFRESH "リフレツシユ" // "Refresh"
#define MSG_WATCH "インフォ" // "Info screen"
#define MSG_PREPARE "シ゛ユンヒ゛セツテイ" //"Prepare"
#define MSG_TUNE "チョウセイ" // "Tune"
#define MSG_PAUSE_PRINT "イチシ゛テイシ" // "Pause print"
#define MSG_RESUME_PRINT "フ゜リントアイセイ" // "Resume print"
#define MSG_STOP_PRINT "フ゜リントテイシ" // "Stop print"
#define MSG_CARD_MENU "SDセート゛セラフ゜リント" // "Print from SD"
#define MSG_NO_CARD "SDセート゛セ゛アリマセン" // "No SD card"
#define MSG_DWELL "スリーフ゜" // "Sleep..."
#define MSG_USERWAIT "シハ゛ラケオマチケタ゛アイ" // "Wait for user..."
#define MSG_RESUMING "フ゜リントアイセイ" // "Resuming print"
#define MSG_PRINT_ABORTED "フ゜リントチユウシアレマシタ" // "Print aborted"
#define MSG_NO_MOVE "ウコ゛キマセン" // "No move."
#define MSG_KILLED "ショウキョ" // "KILLED. "
#define MSG_STOPPED "テイシシマシタ" // "STOPPED. "
#define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"
#define MSG_CONTROL_RETRACTF "Retract V"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "フィラナントコウセン" // "Change filament"
#define MSG_INIT_SDCARD "SDセート゛アイヨミコミ" // "Init. SD card"
#define MSG_CNG_SDCARD "SDセート゛コウセン" // "Change SD card"
#define MSG_ZPROBE_OUT "Zフ゜ローフ゛ ヘ゛ツトnセ゛イ" // "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "ケ゛ンテンハXYイト゛ウコ゛Z" // "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Zオフセツト" // "Z Offset"
#define MSG_BABYSTEP_X "ヒ゛ト゛ウ X" // "Babystep X"
#define MSG_BABYSTEP_Y "ヒ゛ト゛ウ Y" // "Babystep Y"
#define MSG_BABYSTEP_Z "ヒ゛ト゛ウ Z" // "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif // DELTA_CALIBRATION_MENU
#endif // LANGUAGE_KANA_UTF_H