MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
5e5d250832
Firmware2/Marlin/dogm_bitmaps.h

264 lines
18 KiB
C
Raw Normal View History

Added gplv3 header to all Marlin files
2016-03-24 19:01:20 +01:00
/*
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/*
* BitMap for splashscreen
* Generated with: http://www.digole.com/tools/PicturetoC_Hex_converter.php
* Please note that using the high-res version takes 402Bytes of PROGMEM.
*/
Replaced some literal constants with defines Replaced calculation to centre bitmap with fixed values. Saved 20 bytes.
2015-02-03 09:52:29 +01:00
//#define START_BMPHIGH
Make bootscreen configurable for the graphic displays Saves about 473 byte of progmem and 28 bytes of RAM.
2015-07-31 19:32:23 +02:00
#if ENABLED(SHOW_BOOTSCREEN)
#if ENABLED(START_BMPHIGH)
#define START_BMPWIDTH 112
#define START_BMPHEIGHT 38
#define START_BMPBYTEWIDTH 14
#define START_BMPBYTES 532 // START_BMPWIDTH * START_BMPHEIGHT / 8
added high and low resolutions version of splash screen logo (saving code size)
2015-01-09 18:49:24 +01:00
Make bootscreen configurable for the graphic displays Saves about 473 byte of progmem and 28 bytes of RAM.
2015-07-31 19:32:23 +02:00
const unsigned char start_bmp[START_BMPBYTES] PROGMEM = {
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x0F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFF, 0xFF,
0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xFF, 0xFF,
0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF,
0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x3F, 0xFF,
0xC0, 0x0F, 0xC0, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x18, 0x00, 0x1F, 0xFF,
0xC0, 0x3F, 0xE1, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x3C, 0x00, 0x0F, 0xFF,
0xC0, 0x7F, 0xF3, 0xFF, 0x80, 0x00, 0x00, 0x00, 0x00, 0x78, 0x3C, 0x00, 0x07, 0xFF,
0xC0, 0xFF, 0xFF, 0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x78, 0x3C, 0x00, 0x03, 0xFF,
0xC1, 0xF8, 0x7F, 0x87, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x01, 0xFF,
0xC1, 0xF0, 0x3F, 0x03, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0xFF,
0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0x1F, 0x00, 0x03, 0xE0, 0x78, 0x3C, 0x03, 0xF0, 0x7F,
0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0x7F, 0xC0, 0x0F, 0xF8, 0x78, 0x3C, 0x07, 0xFC, 0x3F,
0xC1, 0xE0, 0x1E, 0x01, 0xE1, 0xFF, 0xE0, 0x1F, 0xFC, 0x78, 0x3C, 0x0F, 0xFE, 0x1F,
0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xFF, 0xF0, 0x3F, 0xFE, 0x78, 0x3C, 0x1F, 0xFE, 0x0F,
0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xF3, 0xF8, 0x3F, 0x3E, 0x78, 0x3C, 0x3F, 0x3F, 0x07,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0xE0, 0xFC, 0x7C, 0x1F, 0x78, 0x3C, 0x3E, 0x1F, 0x07,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0xC0, 0x7C, 0x7C, 0x0F, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x7C, 0x78, 0x0F, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0xC0, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xE0, 0x3C, 0x78, 0x00, 0x7C, 0x3C, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xFF, 0x3F, 0xF8, 0x00, 0x7F, 0xBC, 0x3C, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE1, 0xFF, 0x3F, 0xF8, 0x00, 0x3F, 0xBF, 0xFC, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0xFF, 0x3F, 0xF8, 0x00, 0x1F, 0xBF, 0xFC, 0x0F, 0x03,
0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0x7F, 0x3F, 0xF8, 0x00, 0x0F, 0xBF, 0xFC, 0x0F, 0x03,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06,
0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E,
0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C,
0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
0x0F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0,
0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x80 };
Make bootscreen configurable for the graphic displays Saves about 473 byte of progmem and 28 bytes of RAM.
2015-07-31 19:32:23 +02:00
#else
#define START_BMPWIDTH 56
#define START_BMPHEIGHT 19
#define START_BMPBYTEWIDTH 7
#define START_BMPBYTES 133 // START_BMPWIDTH * START_BMPHEIGHT / 8
const unsigned char start_bmp[START_BMPBYTES] PROGMEM = {
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x60, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF,
0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F,
0x83, 0xCF, 0x00, 0x00, 0x0C, 0x30, 0x3F,
0x87, 0xFF, 0x80, 0x00, 0x0C, 0x30, 0x1F,
0x86, 0x79, 0x80, 0x00, 0x0C, 0x00, 0x0F,
0x8C, 0x30, 0xC7, 0x83, 0x8C, 0x30, 0xE7,
0x8C, 0x30, 0xCF, 0xC7, 0xCC, 0x31, 0xF3,
0x8C, 0x30, 0xDC, 0xEC, 0xEC, 0x33, 0xB9,
0x8C, 0x30, 0xD8, 0x6C, 0x6C, 0x33, 0x19,
0x8C, 0x30, 0xD0, 0x6C, 0x0C, 0x33, 0x19,
0x8C, 0x30, 0xD8, 0x6C, 0x0C, 0x33, 0x19,
0x8C, 0x30, 0xDC, 0x6C, 0x0E, 0x3B, 0x19,
0x8C, 0x30, 0xCF, 0x7C, 0x07, 0x9F, 0x19,
0x8C, 0x30, 0xC7, 0x7C, 0x03, 0x8F, 0x19,
0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06,
0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8 };
Make bootscreen configurable for the graphic displays Saves about 473 byte of progmem and 28 bytes of RAM.
2015-07-31 19:32:23 +02:00
#endif
added missing #endif
2015-01-09 20:23:38 +01:00
#endif
Add bitmap graphics for GLCD 1. Marlin welcome screen 2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1 3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
2013-03-19 19:57:35 +01:00
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
// Here comes a compile-time operation to match the extruder symbols
Adaption of LCD info screen Here comes a compile-time operation to match the extruder symbols on the info screen to the set number of extruders in configuration.h. When only one extruder is selected, the "1" on the symbol will not be displayed.
2014-11-12 17:10:48 +01:00
// on the info screen to the set number of extruders in configuration.h
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
//
// When only one extruder is selected, the "1" on the symbol will not
Adaption of LCD info screen Here comes a compile-time operation to match the extruder symbols on the info screen to the set number of extruders in configuration.h. When only one extruder is selected, the "1" on the symbol will not be displayed.
2014-11-12 17:10:48 +01:00
// be displayed.
Add bitmap graphics for GLCD 1. Marlin welcome screen 2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1 3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
2013-03-19 19:57:35 +01:00
Adaption of LCD info screen Here comes a compile-time operation to match the extruder symbols on the info screen to the set number of extruders in configuration.h. When only one extruder is selected, the "1" on the symbol will not be displayed.
2014-11-12 17:10:48 +01:00
#if EXTRUDERS == 1
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define STATUS_SCREENWIDTH 115 //Width in pixels
#define STATUS_SCREENHEIGHT 19 //Height in pixels
#define STATUS_SCREENBYTEWIDTH 15 //Width in bytes
const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
Adaption of LCD info screen Here comes a compile-time operation to match the extruder symbols on the info screen to the set number of extruders in configuration.h. When only one extruder is selected, the "1" on the symbol will not be displayed.
2014-11-12 17:10:48 +01:00
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define STATUS_SCREENWIDTH 115 //Width in pixels
#define STATUS_SCREENHEIGHT 19 //Height in pixels
#define STATUS_SCREENBYTEWIDTH 15 //Width in bytes
const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
Adaption of LCD info screen Here comes a compile-time operation to match the extruder symbols on the info screen to the set number of extruders in configuration.h. When only one extruder is selected, the "1" on the symbol will not be displayed.
2014-11-12 17:10:48 +01:00
#elif EXTRUDERS == 2
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define STATUS_SCREENWIDTH 115 //Width in pixels
#define STATUS_SCREENHEIGHT 19 //Height in pixels
#define STATUS_SCREENBYTEWIDTH 15 //Width in bytes
const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
Adaption of LCD info screen Here comes a compile-time operation to match the extruder symbols on the info screen to the set number of extruders in configuration.h. When only one extruder is selected, the "1" on the symbol will not be displayed.
2014-11-12 17:10:48 +01:00
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define STATUS_SCREENWIDTH 115 //Width in pixels
#define STATUS_SCREENHEIGHT 19 //Height in pixels
#define STATUS_SCREENBYTEWIDTH 15 //Width in bytes
const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
Adaption of LCD info screen Here comes a compile-time operation to match the extruder symbols on the info screen to the set number of extruders in configuration.h. When only one extruder is selected, the "1" on the symbol will not be displayed.
2014-11-12 17:10:48 +01:00
#else
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define STATUS_SCREENWIDTH 115 //Width in pixels
#define STATUS_SCREENHEIGHT 19 //Height in pixels
#define STATUS_SCREENBYTEWIDTH 15 //Width in bytes
const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
Add bitmap graphics for GLCD 1. Marlin welcome screen 2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1 3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
2013-03-19 19:57:35 +01:00
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 08:08:58 +02:00
#define STATUS_SCREENWIDTH 115 //Width in pixels
#define STATUS_SCREENHEIGHT 19 //Height in pixels
#define STATUS_SCREENBYTEWIDTH 15 //Width in bytes
const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
};
#endif // Extruders
Add bitmap graphics for GLCD 1. Marlin welcome screen 2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1 3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
2013-03-19 19:57:35 +01:00
Reference in New Issue Copy Permalink