2013-07-23 21:49:37 +02:00
# ifndef LANGUAGE_H
# define LANGUAGE_H
// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
//
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
// Languages
// 1 English
// 2 Polish
// 3 French
// 4 German
// 5 Spanish
// 6 Russian
// 7 Italian
// 8 Portuguese
// 9 Finnish
2014-02-09 18:24:24 +01:00
// 10 Aragonese
2014-02-17 17:00:50 +01:00
// 11 Dutch
2013-07-23 21:49:37 +02:00
# ifndef LANGUAGE_CHOICE
2014-02-12 14:21:26 +01:00
# define LANGUAGE_CHOICE 1 // Pick your language from the list above
2013-07-23 21:49:37 +02:00
# endif
# define PROTOCOL_VERSION "1.0"
2014-01-06 11:20:03 +01:00
# if MOTHERBOARD == 7 || MOTHERBOARD == 71 || MOTHERBOARD == 72
2013-07-23 21:49:37 +02:00
# define MACHINE_NAME "Ultimaker"
# define FIRMWARE_URL "http: //firmware.ultimaker.com"
# elif MOTHERBOARD == 80
# define MACHINE_NAME "Rumba"
# define FIRMWARE_URL "https: //github.com/ErikZalm/Marlin/"
# elif MOTHERBOARD == 77
# define MACHINE_NAME "3Drag"
# define FIRMWARE_URL "http: //3dprint.elettronicain.it/"
# else
# ifdef CUSTOM_MENDEL_NAME
# define MACHINE_NAME CUSTOM_MENDEL_NAME
# else
# define MACHINE_NAME "Mendel"
# endif
2013-11-10 16:36:37 +01:00
2014-02-20 15:28:29 +01:00
// Default firmware set to Mendel
2014-02-11 23:38:01 +01:00
# define FIRMWARE_URL "https: //github.com/ErikZalm/Marlin/"
2013-07-23 21:49:37 +02:00
# endif
2014-02-11 23:38:01 +01:00
2013-11-10 16:36:37 +01:00
# ifndef MACHINE_UUID
# define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
# endif
2014-02-11 23:38:01 +01:00
2013-07-23 21:49:37 +02:00
# define STRINGIFY_(n) #n
# define STRINGIFY(n) STRINGIFY_(n)
2014-02-11 23:38:01 +01:00
2014-02-12 14:21:26 +01:00
// Common LCD messages
/* nothing here as of yet */
// Common serial messages
# define MSG_MARLIN "Marlin"
2013-07-23 21:49:37 +02:00
# if LANGUAGE_CHOICE == 1
// LCD Menu Messages
2014-02-12 14:21:26 +01:00
// Please note these are limited to 17 characters!
# define WELCOME_MSG MACHINE_NAME " ready."
2013-07-23 21:49:37 +02:00
# define MSG_SD_INSERTED "Card inserted"
# define MSG_SD_REMOVED "Card removed"
# define MSG_MAIN "Main"
# define MSG_AUTOSTART "Autostart"
2014-02-12 14:21:26 +01:00
# define MSG_DISABLE_STEPPERS "Disable steppers"
# define MSG_AUTO_HOME "Auto home"
# define MSG_SET_ORIGIN "Set origin"
2013-07-23 21:49:37 +02:00
# define MSG_PREHEAT_PLA "Preheat PLA"
2014-02-12 14:21:26 +01:00
# define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"
2013-07-23 21:49:37 +02:00
# define MSG_PREHEAT_ABS "Preheat ABS"
2014-02-12 14:21:26 +01:00
# define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"
2013-07-23 21:49:37 +02:00
# define MSG_COOLDOWN "Cooldown"
2014-02-12 14:21:26 +01:00
# define MSG_SWITCH_PS_ON "Switch power on"
# define MSG_SWITCH_PS_OFF "Switch power off"
2013-07-23 21:49:37 +02:00
# define MSG_EXTRUDE "Extrude"
# define MSG_RETRACT "Retract"
2014-02-12 14:21:26 +01:00
# define MSG_MOVE_AXIS "Move axis"
2014-02-11 14:54:43 +01:00
# define MSG_MOVE_X "Move X"
# define MSG_MOVE_Y "Move Y"
# define MSG_MOVE_Z "Move Z"
# define MSG_MOVE_E "Extruder"
# define MSG_MOVE_01MM "Move 0.1mm"
# define MSG_MOVE_1MM "Move 1mm"
# define MSG_MOVE_10MM "Move 10mm"
2013-07-23 21:49:37 +02:00
# define MSG_SPEED "Speed"
# define MSG_NOZZLE "Nozzle"
# define MSG_NOZZLE1 "Nozzle2"
# define MSG_NOZZLE2 "Nozzle3"
# define MSG_BED "Bed"
# define MSG_FAN_SPEED "Fan speed"
# define MSG_FLOW "Flow"
# define MSG_CONTROL "Control"
# define MSG_MIN " \002 Min"
# define MSG_MAX " \002 Max"
# define MSG_FACTOR " \002 Fact"
# define MSG_AUTOTEMP "Autotemp"
# define MSG_ON "On "
# define MSG_OFF "Off"
# define MSG_PID_P "PID-P"
# define MSG_PID_I "PID-I"
# define MSG_PID_D "PID-D"
# define MSG_PID_C "PID-C"
# define MSG_ACC "Accel"
# define MSG_VXY_JERK "Vxy-jerk"
# define MSG_VZ_JERK "Vz-jerk"
# define MSG_VE_JERK "Ve-jerk"
# define MSG_VMAX "Vmax "
# define MSG_X "x"
# define MSG_Y "y"
# define MSG_Z "z"
# define MSG_E "e"
# define MSG_VMIN "Vmin"
# define MSG_VTRAV_MIN "VTrav min"
# define MSG_AMAX "Amax "
# define MSG_A_RETRACT "A-retract"
# define MSG_XSTEPS "Xsteps / mm"
# define MSG_YSTEPS "Ysteps / mm"
# define MSG_ZSTEPS "Zsteps / mm"
# define MSG_ESTEPS "Esteps / mm"
# define MSG_RECTRACT "Rectract"
# define MSG_TEMPERATURE "Temperature"
# define MSG_MOTION "Motion"
# define MSG_CONTRAST "LCD contrast"
# define MSG_STORE_EPROM "Store memory"
# define MSG_LOAD_EPROM "Load memory"
2014-02-12 14:21:26 +01:00
# define MSG_RESTORE_FAILSAFE "Restore failsafe"
2013-07-23 21:49:37 +02:00
# define MSG_REFRESH "Refresh"
# define MSG_WATCH "Info screen"
# define MSG_PREPARE "Prepare"
# define MSG_TUNE "Tune"
2014-02-12 14:21:26 +01:00
# define MSG_PAUSE_PRINT "Pause print"
# define MSG_RESUME_PRINT "Resume print"
# define MSG_STOP_PRINT "Stop print"
2013-07-23 21:49:37 +02:00
# define MSG_CARD_MENU "Print from SD"
2014-02-12 14:21:26 +01:00
# define MSG_NO_CARD "No SD card"
2013-07-23 21:49:37 +02:00
# define MSG_DWELL "Sleep..."
# define MSG_USERWAIT "Wait for user..."
# define MSG_RESUMING "Resuming print"
# define MSG_NO_MOVE "No move."
# define MSG_KILLED "KILLED. "
# define MSG_STOPPED "STOPPED. "
# define MSG_CONTROL_RETRACT "Retract mm"
# define MSG_CONTROL_RETRACTF "Retract F"
# define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
# define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
# define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
# define MSG_AUTORETRACT "AutoRetr."
# define MSG_FILAMENTCHANGE "Change filament"
2014-02-20 15:20:27 +01:00
# define MSG_INIT_SDCARD "Init. SD card"
2014-02-12 14:21:26 +01:00
# define MSG_CNG_SDCARD "Change SD card"
2014-02-20 15:28:29 +01:00
# define MSG_ZPROBE_OUT "Z probe out. bed"
# define MSG_POSITION_UNKNOWN "Home X / Y before Z"
# define MSG_ZPROBE_ZOFFSET "Z Offset"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEP_X "Babystep X"
# define MSG_BABYSTEP_Y "Babystep Y"
# define MSG_BABYSTEP_Z "Babystep Z"
# define MSG_ENDSTOP_ABORT "Endstop abort"
2013-07-23 21:49:37 +02:00
// Serial Console Messages
# define MSG_Enqueing "enqueing \""
# define MSG_POWERUP "PowerUp"
# define MSG_EXTERNAL_RESET " External Reset"
# define MSG_BROWNOUT_RESET " Brown out Reset"
# define MSG_WATCHDOG_RESET " Watchdog Reset"
# define MSG_SOFTWARE_RESET " Software Reset"
# define MSG_AUTHOR " | Author: "
# define MSG_CONFIGURATION_VER " Last Updated: "
# define MSG_FREE_MEMORY " Free Memory: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Done saving file."
# define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
# define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
# define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
# define MSG_FILE_PRINTED "Done printing file"
# define MSG_BEGIN_FILE_LIST "Begin file list"
# define MSG_END_FILE_LIST "End file list"
# define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
# define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
2014-01-31 09:54:19 +01:00
# define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
2013-07-23 21:49:37 +02:00
# define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
# define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
# define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
# define MSG_HEATING "Heating..."
# define MSG_HEATING_COMPLETE "Heating done."
# define MSG_BED_HEATING "Bed Heating."
# define MSG_BED_DONE "Bed done."
2013-11-01 21:51:50 +01:00
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
2013-07-23 21:49:37 +02:00
# define MSG_COUNT_X " Count X: "
# define MSG_ERR_KILLED "Printer halted. kill() called!"
# define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
# define MSG_RESEND "Resend: "
# define MSG_UNKNOWN_COMMAND "Unknown command: \""
# define MSG_ACTIVE_EXTRUDER "Active Extruder: "
# define MSG_INVALID_EXTRUDER "Invalid extruder"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Reporting endstop status"
# define MSG_ENDSTOP_HIT "TRIGGERED"
# define MSG_ENDSTOP_OPEN "open"
# define MSG_HOTEND_OFFSET "Hotend offsets:"
# define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
# define MSG_SD_INIT_FAIL "SD init fail"
# define MSG_SD_VOL_INIT_FAIL "volume.init failed"
# define MSG_SD_OPENROOT_FAIL "openRoot failed"
# define MSG_SD_CARD_OK "SD card ok"
# define MSG_SD_WORKDIR_FAIL "workDir open failed"
# define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
# define MSG_SD_FILE_OPENED "File opened: "
# define MSG_SD_SIZE " Size: "
# define MSG_SD_FILE_SELECTED "File selected"
# define MSG_SD_WRITE_TO_FILE "Writing to file: "
# define MSG_SD_PRINTING_BYTE "SD printing byte "
# define MSG_SD_NOT_PRINTING "Not SD printing"
# define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
# define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
# define MSG_STEPPER_TOO_HIGH "Steprate too high: "
# define MSG_ENDSTOPS_HIT "endstops hit: "
# define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
# define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEPPING_X "Babystepping X"
# define MSG_BABYSTEPPING_Y "Babystepping Y"
# define MSG_BABYSTEPPING_Z "Babystepping Z"
2014-02-12 14:21:26 +01:00
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
2013-07-23 21:49:37 +02:00
# endif
# if LANGUAGE_CHOICE == 2
2014-02-12 14:21:26 +01:00
2013-07-23 21:49:37 +02:00
// LCD Menu Messages
2014-02-12 14:21:26 +01:00
// Please note these are limited to 17 characters!
2014-02-11 23:38:01 +01:00
# define WELCOME_MSG MACHINE_NAME " gotowy."
2013-07-23 21:49:37 +02:00
# define MSG_SD_INSERTED "Karta wlozona"
# define MSG_SD_REMOVED "Karta usunieta"
2014-02-07 19:15:51 +01:00
# define MSG_MAIN "Menu glowne"
2013-07-23 21:49:37 +02:00
# define MSG_AUTOSTART "Autostart"
# define MSG_DISABLE_STEPPERS "Wylacz silniki"
# define MSG_AUTO_HOME "Auto. poz. zerowa"
2014-02-12 14:21:26 +01:00
# define MSG_SET_ORIGIN "Ustaw punkt zero"
2013-07-23 21:49:37 +02:00
# define MSG_PREHEAT_PLA "Rozgrzej PLA"
2014-02-12 14:21:26 +01:00
# define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"
2013-07-23 21:49:37 +02:00
# define MSG_PREHEAT_ABS "Rozgrzej ABS"
2014-02-12 14:21:26 +01:00
# define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"
2013-07-23 21:49:37 +02:00
# define MSG_COOLDOWN "Chlodzenie"
2014-02-11 23:38:01 +01:00
# define MSG_SWITCH_PS_ON "Wlacz zasilacz"
# define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
2013-07-23 21:49:37 +02:00
# define MSG_EXTRUDE "Ekstruzja"
# define MSG_RETRACT "Cofanie"
# define MSG_MOVE_AXIS "Ruch osi"
2014-02-11 23:38:01 +01:00
# define MSG_MOVE_X "Przesun w X"
# define MSG_MOVE_Y "Przesun w Y"
# define MSG_MOVE_Z "Przesun w Z"
# define MSG_MOVE_E "Ekstruzja (os E)"
2014-02-12 14:21:26 +01:00
# define MSG_MOVE_01MM "Przesuwaj co .1mm"
2014-02-11 23:38:01 +01:00
# define MSG_MOVE_1MM "Przesuwaj co 1mm"
# define MSG_MOVE_10MM "Przesuwaj co 10mm"
2013-07-23 21:49:37 +02:00
# define MSG_SPEED "Predkosc"
# define MSG_NOZZLE "Dysza"
2014-02-11 23:38:01 +01:00
# define MSG_NOZZLE1 "Dysza 2"
# define MSG_NOZZLE2 "Dysza 3"
2013-07-23 21:49:37 +02:00
# define MSG_BED "Loze"
# define MSG_FAN_SPEED "Obroty wiatraka"
# define MSG_FLOW "Przeplyw"
# define MSG_CONTROL "Kontrola"
# define MSG_MIN " \002 Min"
# define MSG_MAX " \002 Max"
# define MSG_FACTOR " \002 Mnoznik"
2014-02-11 23:38:01 +01:00
# define MSG_AUTOTEMP "Auto. temperatura"
2013-07-23 21:49:37 +02:00
# define MSG_ON "Wl. "
# define MSG_OFF "Wyl."
# define MSG_PID_P "PID-P"
# define MSG_PID_I "PID-I"
# define MSG_PID_D "PID-D"
# define MSG_PID_C "PID-C"
2014-02-11 23:38:01 +01:00
# define MSG_ACC "Przyspieszenie"
2013-07-23 21:49:37 +02:00
# define MSG_VXY_JERK "Zryw Vxy"
# define MSG_VZ_JERK "Zryw Vz"
# define MSG_VE_JERK "Zryw Ve"
# define MSG_VMAX "Vmax"
# define MSG_X "x"
# define MSG_Y "y"
# define MSG_Z "z"
# define MSG_E "e"
# define MSG_VMIN "Vmin"
# define MSG_VTRAV_MIN "Vskok min"
# define MSG_AMAX "Amax"
# define MSG_A_RETRACT "A-wycofanie"
# define MSG_XSTEPS "krokiX / mm"
# define MSG_YSTEPS "krokiY / mm"
# define MSG_ZSTEPS "krokiZ / mm"
# define MSG_ESTEPS "krokiE / mm"
# define MSG_RECTRACT "Wycofanie"
# define MSG_TEMPERATURE "Temperatura"
# define MSG_MOTION "Ruch"
2014-02-07 19:15:51 +01:00
# define MSG_CONTRAST "Kontrast LCD"
2013-07-23 21:49:37 +02:00
# define MSG_STORE_EPROM "Zapisz w pamieci"
# define MSG_LOAD_EPROM "Wczytaj z pamieci"
2014-02-12 14:21:26 +01:00
# define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"
2013-07-23 21:49:37 +02:00
# define MSG_REFRESH "\004Odswiez"
2014-02-07 19:15:51 +01:00
# define MSG_WATCH "Ekran glowny"
2013-07-23 21:49:37 +02:00
# define MSG_PREPARE "Przygotuj"
2014-02-07 19:15:51 +01:00
# define MSG_CONTROL "Ustawienia"
2013-07-23 21:49:37 +02:00
# define MSG_TUNE "Strojenie"
# define MSG_PAUSE_PRINT "Pauza"
# define MSG_RESUME_PRINT "Wznowienie"
# define MSG_STOP_PRINT "Stop"
2014-02-07 19:15:51 +01:00
# define MSG_CARD_MENU "Menu karty SD"
2013-07-23 21:49:37 +02:00
# define MSG_NO_CARD "Brak karty"
# define MSG_DWELL "Uspij..."
2014-02-12 14:21:26 +01:00
# define MSG_USERWAIT "Oczekiwanie..."
# define MSG_RESUMING "Wznawianie druku"
# define MSG_NO_MOVE "Brak ruchu"
2013-07-23 21:49:37 +02:00
# define MSG_KILLED "Ubity. "
# define MSG_STOPPED "Zatrzymany. "
# define MSG_STEPPER_RELEASED "Zwolniony."
# define MSG_CONTROL_RETRACT "Wycofaj mm"
# define MSG_CONTROL_RETRACTF "Wycofaj F"
# define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
# define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
# define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F"
# define MSG_AUTORETRACT "Auto. wycofanie"
2014-02-07 19:15:51 +01:00
# define MSG_FILAMENTCHANGE "Zmien filament"
2014-02-12 14:21:26 +01:00
# define MSG_INIT_SDCARD "Inicjal. karty SD"
2014-02-11 23:38:01 +01:00
# define MSG_CNG_SDCARD "Zmiana karty SD"
2014-02-20 15:28:29 +01:00
# define MSG_ZPROBE_OUT "Sonda Z za lozem"
# define MSG_POSITION_UNKNOWN "Wroc w XY przed Z"
# define MSG_ZPROBE_ZOFFSET "Offset Z"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEP_X "Babystep X"
# define MSG_BABYSTEP_Y "Babystep Y"
# define MSG_BABYSTEP_Z "Babystep Z"
2014-02-12 14:21:26 +01:00
# define MSG_ENDSTOP_ABORT "Blad wyl. kranc."
2014-02-11 23:38:01 +01:00
# define MSG_CONTRAST "Kontrast"
2013-07-23 21:49:37 +02:00
// Serial Console Messages
# define MSG_Enqueing "Kolejkowanie \""
# define MSG_POWERUP "Zasilanie wlaczone"
# define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
# define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
# define MSG_WATCHDOG_RESET " Reset (watchdog)"
# define MSG_SOFTWARE_RESET " Reset (programowy)"
# define MSG_AUTHOR " | Autor: "
# define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
# define MSG_FREE_MEMORY " Wolna pamiec: "
# define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "
2014-02-11 23:38:01 +01:00
# define MSG_OK "OK"
2013-07-23 21:49:37 +02:00
# define MSG_FILE_SAVED "Plik zapisany."
# define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
# define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
# define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
# define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
# define MSG_BEGIN_FILE_LIST "Start listy plikow"
# define MSG_END_FILE_LIST "Koniec listy plikow"
# define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
# define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
2014-01-31 09:54:19 +01:00
# define MSG_M200_INVALID_EXTRUDER "M200 Niepoprawny ekstruder "
2013-07-23 21:49:37 +02:00
# define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder "
# define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
# define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
# define MSG_HEATING "Nagrzewanie ekstrudera..."
# define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
# define MSG_BED_HEATING "Nagrzewanie loza..."
# define MSG_BED_DONE "Nagrzewanie loza zakonczone."
2013-11-01 21:51:50 +01:00
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
2014-02-11 23:38:01 +01:00
# define MSG_COUNT_X " Licznik X: "
2013-07-23 21:49:37 +02:00
# define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
# define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
# define MSG_RESEND "Wyslij ponownie: "
# define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
# define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
# define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
2014-02-07 19:15:51 +01:00
# define MSG_ENDSTOP_HIT "Wyzwolony"
# define MSG_ENDSTOP_OPEN "Otwarty"
2014-02-11 23:38:01 +01:00
# define MSG_HOTEND_OFFSET "Offsety dysz:"
2013-07-23 21:49:37 +02:00
# define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
# define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
# define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
# define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
# define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
# define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
# define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
# define MSG_SD_FILE_OPENED "Otwarto plik:"
# define MSG_SD_SIZE " Rozmiar:"
# define MSG_SD_FILE_SELECTED "Wybrano plik"
# define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
# define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
# define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
2014-02-11 23:38:01 +01:00
# define MSG_SD_ERR_WRITE_TO_FILE "Wystapil blad podczas zapisu do pliku"
2013-07-23 21:49:37 +02:00
# define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
# define MSG_STEPPER_TOO_HIGH "Za duza czestotliwosc krokow: "
# define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
# define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
# define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
2014-02-11 23:38:01 +01:00
# define MSG_BABYSTEPPING_X "Babystepping w osi X"
# define MSG_BABYSTEPPING_Y "Babystepping w osi Y"
# define MSG_BABYSTEPPING_Z "Babystepping w osi Z"
2014-02-12 14:21:26 +01:00
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
2013-07-23 21:49:37 +02:00
# endif
# if LANGUAGE_CHOICE == 3
2014-02-12 14:21:26 +01:00
// LCD Menu Messages
// Please note these are limited to 17 characters!
2013-07-28 18:18:41 +02:00
# define WELCOME_MSG MACHINE_NAME " prete."
2013-07-23 22:13:40 +02:00
# define MSG_SD_INSERTED "Carte inseree"
# define MSG_SD_REMOVED "Carte retiree"
2013-07-28 18:18:41 +02:00
# define MSG_MAIN "Menu principal"
# define MSG_AUTOSTART "Demarrage auto"
# define MSG_DISABLE_STEPPERS "Arreter moteurs"
# define MSG_AUTO_HOME "Home auto."
# define MSG_SET_ORIGIN "Regler origine"
2013-07-23 22:13:40 +02:00
# define MSG_PREHEAT_PLA " Prechauffage PLA"
2014-02-12 14:21:26 +01:00
# define MSG_PREHEAT_PLA_SETTINGS " Regl. prech. PLA"
2013-07-28 18:18:41 +02:00
# define MSG_PREHEAT_ABS "Prechauffage ABS"
2014-02-12 14:21:26 +01:00
# define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"
2013-07-28 18:18:41 +02:00
# define MSG_COOLDOWN "Refroidir"
# define MSG_SWITCH_PS_ON "Allumer alim."
# define MSG_SWITCH_PS_OFF "Eteindre alim."
# define MSG_EXTRUDE "Extrusion"
# define MSG_RETRACT "Retraction"
# define MSG_PREHEAT_PLA "Prechauffage PLA"
# define MSG_PREHEAT_ABS "Prechauffage ABS"
# define MSG_MOVE_AXIS "Deplacer un axe"
2014-02-11 14:54:43 +01:00
# define MSG_MOVE_X "Move X"
# define MSG_MOVE_Y "Move Y"
# define MSG_MOVE_Z "Move Z"
# define MSG_MOVE_E "Extruder"
# define MSG_MOVE_01MM "Move 0.1mm"
# define MSG_MOVE_1MM "Move 1mm"
# define MSG_MOVE_10MM "Move 10mm"
2013-07-28 18:18:41 +02:00
# define MSG_SPEED " Vitesse"
# define MSG_NOZZLE "Buse"
# define MSG_NOZZLE1 "Buse2"
# define MSG_NOZZLE2 "Buse3"
# define MSG_BED "Plateau"
2014-02-12 14:21:26 +01:00
# define MSG_FAN_SPEED "Vite. ventilateur"
2013-07-28 18:18:41 +02:00
# define MSG_FLOW "Flux"
# define MSG_CONTROL "Controler"
# define MSG_MIN " \002 Min"
# define MSG_MAX " \002 Max"
# define MSG_FACTOR " \002 Facteur"
# define MSG_AUTOTEMP "Temp. Auto."
2013-07-23 22:13:40 +02:00
# define MSG_ON "Marche "
# define MSG_OFF "Arret"
2013-07-28 18:18:41 +02:00
# define MSG_PID_P "PID-P"
# define MSG_PID_I "PID-I"
# define MSG_PID_D "PID-D"
# define MSG_PID_C "PID-C"
# define MSG_ACC "Accel"
2013-07-23 22:13:40 +02:00
# define MSG_VXY_JERK "Vxy-jerk"
# define MSG_VZ_JERK "Vz-jerk"
# define MSG_VE_JERK "Ve-jerk"
2013-07-28 18:18:41 +02:00
# define MSG_VMAX "Vmax"
# define MSG_X "x"
# define MSG_Y "y"
# define MSG_Z "z"
# define MSG_E "e"
# define MSG_VMIN "Vmin"
# define MSG_VTRAV_MIN "Vdepl min"
# define MSG_AMAX "Amax "
# define MSG_A_RETRACT "A-retract"
# define MSG_XSTEPS "Xpas / mm"
# define MSG_YSTEPS "Ypas / mm"
# define MSG_ZSTEPS "Zpas / mm"
# define MSG_ESTEPS "Epas / mm"
2013-07-23 22:13:40 +02:00
# define MSG_TEMPERATURE "Temperature"
# define MSG_MOTION "Mouvement"
2013-07-28 18:18:41 +02:00
# define MSG_CONTRAST "Contraste LCD"
# define MSG_STORE_EPROM "Sauver config"
# define MSG_LOAD_EPROM "Lire config"
# define MSG_RESTORE_FAILSAFE "Restaurer defauts"
# define MSG_REFRESH "Actualiser"
# define MSG_WATCH "Surveiller"
# define MSG_PREPARE "Preparer"
# define MSG_TUNE "Regler"
# define MSG_PAUSE_PRINT "Interrompre impr."
# define MSG_RESUME_PRINT "Reprendre impr."
# define MSG_STOP_PRINT "Arreter impr."
# define MSG_CARD_MENU "Impr. depuis SD"
# define MSG_NO_CARD "Pas de carte"
2013-07-23 22:13:40 +02:00
# define MSG_DWELL "Repos..."
2014-02-12 14:21:26 +01:00
# define MSG_USERWAIT "Atten. de l'util."
# define MSG_RESUMING "Repri. de l'impr."
2013-07-23 22:13:40 +02:00
# define MSG_NO_MOVE "Aucun mouvement."
2013-07-28 18:18:41 +02:00
# define MSG_KILLED "MORT."
2013-07-23 22:13:40 +02:00
# define MSG_STOPPED "STOPPE."
# define MSG_STEPPER_RELEASED "RELACHE."
2013-07-28 18:18:41 +02:00
# define MSG_CONTROL_RETRACT "Retraction mm"
# define MSG_CONTROL_RETRACTF "Retraction F"
# define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
# define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
# define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
# define MSG_AUTORETRACT "Retract. Auto."
# define MSG_FILAMENTCHANGE "Changer filament"
2014-02-20 15:28:29 +01:00
# define MSG_INIT_SDCARD "Init. la carte SD"
2014-02-12 14:21:26 +01:00
# define MSG_CNG_SDCARD "Changer de carte"
2014-02-20 15:28:29 +01:00
# define MSG_ZPROBE_OUT "Z sonde exte. lit"
# define MSG_POSITION_UNKNOWN "Rev. dans XY av.Z"
# define MSG_ZPROBE_ZOFFSET "Offset Z"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEP_X "Babystep X"
# define MSG_BABYSTEP_Y "Babystep Y"
# define MSG_BABYSTEP_Z "Babystep Z"
2014-02-12 14:21:26 +01:00
# define MSG_ENDSTOP_ABORT "Butee abandon"
2014-02-11 14:54:43 +01:00
# define MSG_CONTRAST "Contrast"
2013-07-23 21:49:37 +02:00
// Serial Console Messages
2013-07-23 22:13:40 +02:00
# define MSG_Enqueing "Mise en tampon \""
# define MSG_POWERUP "Allumage"
# define MSG_EXTERNAL_RESET " RAZ Externe"
# define MSG_BROWNOUT_RESET " RAZ defaut alim."
# define MSG_WATCHDOG_RESET " RAZ Watchdog"
# define MSG_SOFTWARE_RESET " RAZ logicielle"
# define MSG_AUTHOR " | Auteur: "
# define MSG_CONFIGURATION_VER " Derniere MaJ: "
# define MSG_FREE_MEMORY " Memoire libre: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Fichier enregistre."
# define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "
# define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "
# define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "
# define MSG_FILE_PRINTED "Impression terminee"
# define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"
# define MSG_END_FILE_LIST "Fin de la liste de fichiers"
# define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
# define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
2014-01-31 09:54:19 +01:00
# define MSG_M200_INVALID_EXTRUDER "M200 Extruder invalide"
2013-07-23 22:13:40 +02:00
# define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide"
# define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"
# define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
# define MSG_HEATING "En chauffe..."
# define MSG_HEATING_COMPLETE "Chauffe terminee."
# define MSG_BED_HEATING "Chauffe du lit."
# define MSG_BED_DONE "Chauffe du lit terminee."
2013-11-01 21:51:50 +01:00
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
2013-07-23 22:13:40 +02:00
# define MSG_COUNT_X " Compteur X: "
# define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
# define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
# define MSG_RESEND "Renvoie: "
# define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
# define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "
# define MSG_INVALID_EXTRUDER "Extrudeur invalide"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Affichage du status des fin de course"
# define MSG_ENDSTOP_HIT "DECLENCHE"
# define MSG_ENDSTOP_OPEN "OUVERT"
# define MSG_HOTEND_OFFSET "Hotend offsets:"
2013-07-23 21:49:37 +02:00
2013-07-23 22:13:40 +02:00
# define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"
# define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
# define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
# define MSG_SD_OPENROOT_FAIL "Echec openRoot"
# define MSG_SD_CARD_OK "Carte SD Ok"
# define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
# define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
# define MSG_SD_FILE_OPENED "Fichier ouvert: "
# define MSG_SD_SIZE " Taille: "
# define MSG_SD_FILE_SELECTED "Fichier selectionne"
# define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
# define MSG_SD_PRINTING_BYTE "Octet impression SD "
# define MSG_SD_NOT_PRINTING "Pas d'impression SD"
# define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"
# define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "
2013-07-23 21:49:37 +02:00
2013-07-23 22:13:40 +02:00
# define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: "
# define MSG_ENDSTOPS_HIT "Fin de course atteint: "
# define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
# define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEPPING_X "Babystepping X"
# define MSG_BABYSTEPPING_Y "Babystepping Y"
# define MSG_BABYSTEPPING_Z "Babystepping Z"
2014-02-12 14:21:26 +01:00
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
2014-02-20 15:28:29 +01:00
2013-07-23 21:49:37 +02:00
# endif
# if LANGUAGE_CHOICE == 4
// LCD Menu Messages
2014-02-12 14:21:26 +01:00
// Please note these are limited to 17 characters!
2013-07-23 21:49:37 +02:00
# define WELCOME_MSG MACHINE_NAME " Bereit."
# define MSG_SD_INSERTED "SDKarte erkannt"
# define MSG_SD_REMOVED "SDKarte entfernt"
# define MSG_MAIN "Hauptmenü"
# define MSG_AUTOSTART "Autostart"
2014-02-12 14:21:26 +01:00
# define MSG_DISABLE_STEPPERS "Stepper abschalt."
2013-07-23 21:49:37 +02:00
# define MSG_AUTO_HOME "Auto Nullpunkt"
# define MSG_SET_ORIGIN "Setze Nullpunkt"
# define MSG_PREHEAT_PLA "Vorwärmen PLA"
2014-02-12 14:21:26 +01:00
# define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
2013-07-23 21:49:37 +02:00
# define MSG_PREHEAT_ABS "Vorwärmen ABS"
2014-02-12 14:21:26 +01:00
# define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
2013-07-23 21:49:37 +02:00
# define MSG_COOLDOWN "Abkühlen"
# define MSG_SWITCH_PS_ON "Switch Power On"
# define MSG_SWITCH_PS_OFF "Switch Power Off"
# define MSG_EXTRUDE "Extrude"
# define MSG_RETRACT "Retract"
# define MSG_MOVE_AXIS "Achsen bewegen"
2014-02-11 14:54:43 +01:00
# define MSG_MOVE_X "X bewegen"
# define MSG_MOVE_Y "Y bewegen"
# define MSG_MOVE_Z "Z bewegen"
# define MSG_MOVE_E "Extruder"
# define MSG_MOVE_01MM "0.1mm bewegen"
# define MSG_MOVE_1MM "1mm bewegen"
# define MSG_MOVE_10MM "10mm bewegen"
2013-07-23 21:49:37 +02:00
# define MSG_SPEED "Geschw"
# define MSG_NOZZLE "Düse"
# define MSG_NOZZLE1 "Düse2"
# define MSG_NOZZLE2 "Düse3"
# define MSG_BED "Bett"
# define MSG_FAN_SPEED "Lüftergeschw."
# define MSG_FLOW "Fluss"
# define MSG_CONTROL "Einstellungen"
# define MSG_MIN "\002 Min"
# define MSG_MAX "\002 Max"
# define MSG_FACTOR "\002 Faktor"
# define MSG_AUTOTEMP "AutoTemp"
# define MSG_ON "Ein"
# define MSG_OFF "Aus"
# define MSG_PID_P "PID-P"
# define MSG_PID_I "PID-I"
# define MSG_PID_D "PID-D"
# define MSG_PID_C "PID-C"
# define MSG_ACC "Acc"
# define MSG_VXY_JERK "Vxy-jerk"
# define MSG_VZ_JERK "Vz-jerk"
# define MSG_VE_JERK "Ve-jerk"
# define MSG_VMAX "Vmax "
# define MSG_X "x"
# define MSG_Y "y"
# define MSG_Z "z"
# define MSG_E "e"
# define MSG_VMIN "Vmin"
# define MSG_VTRAV_MIN "VTrav min"
# define MSG_AMAX "Amax "
# define MSG_A_RETRACT "A-Retract"
# define MSG_XSTEPS "Xsteps / mm"
# define MSG_YSTEPS "Ysteps / mm"
# define MSG_ZSTEPS "Zsteps / mm"
# define MSG_ESTEPS "Esteps / mm"
# define MSG_RECTRACT_WIDE "Rectract"
# define MSG_WATCH "Beobachten"
# define MSG_TEMPERATURE "Temperatur"
# define MSG_MOTION "Bewegung"
# define MSG_CONTRAST "LCD contrast"
# define MSG_STORE_EPROM "EPROM speichern"
# define MSG_LOAD_EPROM "EPROM laden"
# define MSG_RESTORE_FAILSAFE "Standardkonfig."
# define MSG_REFRESH "Aktualisieren"
# define MSG_PREPARE "Vorbereitung"
# define MSG_CONTROL "Einstellungen"
# define MSG_TUNE "Justierung"
# define MSG_PAUSE_PRINT "Druck anhalten"
# define MSG_RESUME_PRINT "Druck fortsetz"
# define MSG_STOP_PRINT "Druck stoppen"
# define MSG_CARD_MENU "SDKarten Menü"
# define MSG_NO_CARD "Keine SDKarte"
2014-02-20 15:28:29 +01:00
# define MSG_DWELL "Warten..."
2014-02-12 14:21:26 +01:00
# define MSG_USERWAIT "Warte auf Nutzer"
2013-07-23 22:13:40 +02:00
# define MSG_RESUMING "Druck fortsetzung"
2013-07-23 21:49:37 +02:00
# define MSG_NO_MOVE "Kein Zug."
# define MSG_KILLED "KILLED"
# define MSG_STOPPED "GESTOPPT"
# define MSG_STEPPER_RELEASED "Stepper frei"
2013-07-23 22:13:40 +02:00
# define MSG_CONTROL_RETRACT "Retract mm"
# define MSG_CONTROL_RETRACTF "Retract F"
# define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
# define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
# define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
# define MSG_AUTORETRACT "AutoRetr."
# define MSG_FILAMENTCHANGE "Filament wechseln"
2014-02-20 15:28:29 +01:00
# define MSG_INIT_SDCARD "Init. SD-Card"
2013-07-23 22:13:40 +02:00
# define MSG_CNG_SDCARD "Change SD-Card"
2014-02-20 15:28:29 +01:00
# define MSG_ZPROBE_OUT "Z probe out. bed"
# define MSG_POSITION_UNKNOWN "Home X / Y before Z"
# define MSG_ZPROBE_ZOFFSET "Z Offset"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEP_X "Babystep X"
# define MSG_BABYSTEP_Y "Babystep Y"
# define MSG_BABYSTEP_Z "Babystep Z"
# define MSG_ENDSTOP_ABORT "Endstop abort"
# define MSG_CONTRAST "Contrast"
2014-02-20 15:28:29 +01:00
2013-07-23 21:49:37 +02:00
// Serial Console Messages
# define MSG_Enqueing "enqueing \""
# define MSG_POWERUP "PowerUp"
# define MSG_EXTERNAL_RESET " External Reset"
# define MSG_BROWNOUT_RESET " Brown out Reset"
# define MSG_WATCHDOG_RESET " Watchdog Reset"
# define MSG_SOFTWARE_RESET " Software Reset"
# define MSG_AUTHOR " | Author: "
# define MSG_CONFIGURATION_VER " Last Updated: "
# define MSG_FREE_MEMORY " Free Memory: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Done saving file."
# define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
# define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
# define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
# define MSG_FILE_PRINTED "Done printing file"
# define MSG_BEGIN_FILE_LIST "Begin file list"
# define MSG_END_FILE_LIST "End file list"
# define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
# define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
2014-01-31 09:54:19 +01:00
# define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
2013-07-23 21:49:37 +02:00
# define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
# define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
# define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
# define MSG_HEATING "Heating..."
# define MSG_HEATING_COMPLETE "Heating done."
# define MSG_BED_HEATING "Bed Heating."
# define MSG_BED_DONE "Bed done."
2013-11-01 21:51:50 +01:00
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
2013-07-23 21:49:37 +02:00
# define MSG_COUNT_X " Count X:"
# define MSG_ERR_KILLED "Printer halted. kill() called !!"
# define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
# define MSG_RESEND "Resend:"
# define MSG_UNKNOWN_COMMAND "Unknown command:\""
# define MSG_ACTIVE_EXTRUDER "Active Extruder: "
# define MSG_INVALID_EXTRUDER "Invalid extruder"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Reporting endstop status"
# define MSG_ENDSTOP_HIT "TRIGGERED"
# define MSG_ENDSTOP_OPEN "open"
# define MSG_HOTEND_OFFSET "Hotend offsets:"
# define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
# define MSG_SD_INIT_FAIL "SD init fail"
# define MSG_SD_VOL_INIT_FAIL "volume.init failed"
# define MSG_SD_OPENROOT_FAIL "openRoot failed"
# define MSG_SD_CARD_OK "SD card ok"
# define MSG_SD_WORKDIR_FAIL "workDir open failed"
# define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
# define MSG_SD_FILE_OPENED "File opened:"
# define MSG_SD_SIZE " Size:"
# define MSG_SD_FILE_SELECTED "File selected"
# define MSG_SD_WRITE_TO_FILE "Writing to file: "
# define MSG_SD_PRINTING_BYTE "SD printing byte "
# define MSG_SD_NOT_PRINTING "Not SD printing"
# define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
# define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
# define MSG_STEPPER_TOO_HIGH "Steprate too high : "
# define MSG_ENDSTOPS_HIT "endstops hit: "
# define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
# define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEPPING_X "Babystepping X"
# define MSG_BABYSTEPPING_Y "Babystepping Y"
# define MSG_BABYSTEPPING_Z "Babystepping Z"
2014-02-12 14:21:26 +01:00
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
2013-07-23 21:49:37 +02:00
# endif
# if LANGUAGE_CHOICE == 5
// LCD Menu Messages
2014-02-12 14:21:26 +01:00
// Please note these are limited to 17 characters!
# define WELCOME_MSG MACHINE_NAME " lista."
# define MSG_SD_INSERTED "Tarjeta colocada"
# define MSG_SD_REMOVED "Tarjeta retirada"
# define MSG_MAIN "Menu principal"
2013-07-23 22:13:40 +02:00
# define MSG_AUTOSTART " Autostart"
2014-02-12 14:21:26 +01:00
# define MSG_DISABLE_STEPPERS "Apagar motores"
# define MSG_AUTO_HOME "Llevar al origen"
# define MSG_SET_ORIGIN "Establecer cero"
2013-07-23 22:13:40 +02:00
# define MSG_PREHEAT_PLA "Precalentar PLA"
# define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
# define MSG_PREHEAT_ABS "Precalentar ABS"
# define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"
# define MSG_COOLDOWN "Enfriar"
# define MSG_SWITCH_PS_ON "Switch Power On"
# define MSG_SWITCH_PS_OFF "Switch Power Off"
# define MSG_EXTRUDE "Extruir"
# define MSG_RETRACT "Retraer"
2014-02-12 14:21:26 +01:00
# define MSG_MOVE_AXIS "Mover ejes"
2014-02-11 14:54:43 +01:00
# define MSG_MOVE_X "Move X"
# define MSG_MOVE_Y "Move Y"
# define MSG_MOVE_Z "Move Z"
# define MSG_MOVE_E "Extruder"
# define MSG_MOVE_01MM "Move 0.1mm"
# define MSG_MOVE_1MM "Move 1mm"
# define MSG_MOVE_10MM "Move 10mm"
2013-07-23 22:13:40 +02:00
# define MSG_SPEED "Velocidad"
# define MSG_NOZZLE "Nozzle"
# define MSG_NOZZLE1 "Nozzle2"
# define MSG_NOZZLE2 "Nozzle3"
# define MSG_BED "Base"
# define MSG_FAN_SPEED "Ventilador"
# define MSG_FLOW "Flujo"
# define MSG_CONTROL "Control"
# define MSG_MIN "\002 Min"
# define MSG_MAX "\002 Max"
# define MSG_FACTOR "\002 Fact"
# define MSG_AUTOTEMP "Autotemp"
# define MSG_ON "On"
# define MSG_OFF "Off"
# define MSG_PID_P "PID-P"
# define MSG_PID_I "PID-I"
# define MSG_PID_D "PID-D"
# define MSG_PID_C "PID-C"
# define MSG_ACC "Acel"
# define MSG_VXY_JERK "Vxy-jerk"
# define MSG_VZ_JERK "Vz-jerk"
# define MSG_VE_JERK "Ve-jerk"
# define MSG_VMAX "Vmax"
# define MSG_X "x"
# define MSG_Y "y"
# define MSG_Z "z"
# define MSG_E "e"
# define MSG_VMIN "Vmin"
# define MSG_VTRAV_MIN "VTrav min"
# define MSG_AMAX "Amax"
# define MSG_A_RETRACT "A-retrac."
# define MSG_XSTEPS "X pasos / mm"
# define MSG_YSTEPS "Y pasos / mm"
# define MSG_ZSTEPS "Z pasos / mm"
# define MSG_ESTEPS "E pasos / mm"
# define MSG_RECTRACT "Retraer"
# define MSG_TEMPERATURE "Temperatura"
# define MSG_MOTION "Movimiento"
2014-02-12 14:21:26 +01:00
# define MSG_STORE_EPROM "Guardar memoria"
# define MSG_LOAD_EPROM "Cargar memoria"
# define MSG_RESTORE_FAILSAFE "Rest. de emergen."
2013-07-23 22:13:40 +02:00
# define MSG_REFRESH "Volver a cargar"
# define MSG_WATCH "Monitorizar"
# define MSG_PREPARE "Preparar"
# define MSG_TUNE "Ajustar"
2014-02-12 14:21:26 +01:00
# define MSG_PAUSE_PRINT "Pausar impresion"
# define MSG_RESUME_PRINT "Reanudar impres."
# define MSG_STOP_PRINT "Detener impresion"
2013-07-23 22:13:40 +02:00
# define MSG_CARD_MENU "Menu de SD"
2014-02-12 14:21:26 +01:00
# define MSG_NO_CARD "No hay tarjeta SD"
2013-07-23 22:13:40 +02:00
# define MSG_DWELL "Reposo..."
2014-02-12 14:21:26 +01:00
# define MSG_USERWAIT "Esperando ordenes"
# define MSG_RESUMING "Resumiendo impre."
2013-07-23 22:13:40 +02:00
# define MSG_NO_MOVE "Sin movimiento"
2014-02-12 14:21:26 +01:00
# define MSG_KILLED "PARADA DE EMERG."
# define MSG_STOPPED "PARADA"
2013-07-23 22:13:40 +02:00
# define MSG_CONTROL_RETRACT "Retraer mm"
# define MSG_CONTROL_RETRACTF "Retraer F"
# define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"
# define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
# define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
# define MSG_AUTORETRACT "AutoRetr."
# define MSG_FILAMENTCHANGE "Change filament"
2014-02-12 14:21:26 +01:00
# define MSG_INIT_SDCARD "Iniciando tarjeta"
# define MSG_CNG_SDCARD "Cambiar tarjeta"
2013-07-23 22:13:40 +02:00
# define MSG_RECTRACT_WIDE "Retraer"
# define MSG_TEMPERATURE_WIDE "Temperatura"
# define MSG_TEMPERATURE_RTN "Temperatura"
2014-02-12 14:21:26 +01:00
# define MSG_MAIN_WIDE "Menu principal"
2013-07-23 22:13:40 +02:00
# define MSG_MOTION_WIDE "Movimiento"
# define MSG_PREPARE_ALT "Preparar"
# define MSG_CONTROL_ARROW "Control"
# define MSG_RETRACT_ARROW "Retraer"
# define MSG_STEPPER_RELEASED "Desacoplada."
2014-02-20 15:28:29 +01:00
# define MSG_ZPROBE_OUT "Z probe out. bed"
# define MSG_POSITION_UNKNOWN "Home X / Y before Z"
# define MSG_ZPROBE_ZOFFSET "Z Offset"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEP_X "Babystep X"
# define MSG_BABYSTEP_Y "Babystep Y"
# define MSG_BABYSTEP_Z "Babystep Z"
# define MSG_ENDSTOP_ABORT "Endstop abort"
# define MSG_CONTRAST "Contrast"
2013-07-23 21:49:37 +02:00
// Serial Console Messages
2013-07-23 22:13:40 +02:00
# define MSG_Enqueing "En cola \""
# define MSG_POWERUP "PowerUp"
# define MSG_EXTERNAL_RESET " Reset Externo"
# define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
# define MSG_WATCHDOG_RESET " Reset por Bloqueo"
# define MSG_SOFTWARE_RESET " Reset por Software"
# define MSG_AUTHOR " | Autor: "
# define MSG_CONFIGURATION_VER " Ultima actualizacion: "
# define MSG_FREE_MEMORY " Memoria libre: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Guardado."
# define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
# define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
# define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
# define MSG_FILE_PRINTED "Impresion terminada"
# define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
# define MSG_END_FILE_LIST "Fin de la lista de archivos"
# define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
# define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
2014-01-31 09:54:19 +01:00
# define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalido "
2013-07-23 22:13:40 +02:00
# define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
# define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
# define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
# define MSG_HEATING "Calentando..."
# define MSG_HEATING_COMPLETE "Calentamiento Hecho."
# define MSG_BED_HEATING "Calentando la base."
# define MSG_BED_DONE "Base Caliente."
2013-11-01 21:51:50 +01:00
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
2013-07-23 22:13:40 +02:00
# define MSG_COUNT_X " Cuenta X:"
# define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
# define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
# define MSG_RESEND "Reenviar:"
# define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
# define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
# define MSG_INVALID_EXTRUDER "Extrusor Invalido"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Comprobando fines de carrera."
# define MSG_ENDSTOP_HIT "PULSADO"
# define MSG_ENDSTOP_OPEN "abierto"
# define MSG_HOTEND_OFFSET "Hotend offsets:"
# define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
# define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
# define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
# define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
# define MSG_SD_CARD_OK "Tarjeta SD OK"
# define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
# define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
# define MSG_SD_FILE_OPENED "Archivo abierto:"
# define MSG_SD_SIZE " Tamaño:"
# define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
# define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
# define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
# define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
# define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
# define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
2013-07-23 21:49:37 +02:00
2013-07-23 22:13:40 +02:00
# define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : "
# define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
# define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
# define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEPPING_X "Babystepping X"
# define MSG_BABYSTEPPING_Y "Babystepping Y"
# define MSG_BABYSTEPPING_Z "Babystepping Z"
2014-02-12 14:21:26 +01:00
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
2013-07-23 21:49:37 +02:00
# endif
# if LANGUAGE_CHOICE == 6
2014-02-12 14:21:26 +01:00
// LCD Menu Messages
// Please note these are limited to 17 characters!
# define WELCOME_MSG MACHINE_NAME " Готов."
2013-07-23 22:13:40 +02:00
# define MSG_SD_INSERTED "Карта вставлена"
# define MSG_SD_REMOVED "Карта извлечена"
2014-02-13 12:58:14 +01:00
# define MSG_MAIN "Меню \003"
# define MSG_AUTOSTART "Автостарт"
# define MSG_DISABLE_STEPPERS "Выкл. двигатели"
# define MSG_AUTO_HOME "Парковка"
# define MSG_SET_ORIGIN "Запомнить ноль"
# define MSG_PREHEAT_PLA "Преднагрев PLA"
# define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA"
# define MSG_PREHEAT_ABS "Преднагрев ABS"
# define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS"
# define MSG_COOLDOWN "Охлаждение"
2013-07-23 22:13:40 +02:00
# define MSG_SWITCH_PS_ON "Switch Power On"
# define MSG_SWITCH_PS_OFF "Switch Power Off"
2014-02-13 12:58:14 +01:00
# define MSG_EXTRUDE "Экструзия"
# define MSG_RETRACT "Откат"
# define MSG_MOVE_AXIS "Движение по осям"
2014-02-11 14:54:43 +01:00
# define MSG_MOVE_X "Move X"
# define MSG_MOVE_Y "Move Y"
# define MSG_MOVE_Z "Move Z"
# define MSG_MOVE_E "Extruder"
# define MSG_MOVE_01MM "Move 0.1mm"
# define MSG_MOVE_1MM "Move 1mm"
# define MSG_MOVE_10MM "Move 10mm"
2014-02-13 12:58:14 +01:00
# define MSG_SPEED "Скорость:"
# define MSG_NOZZLE "\002 Фильера:"
# define MSG_NOZZLE1 "\002 Филье р а
# define MSG_NOZZLE2 "\002 Филье р а
# define MSG_BED "\002 Кровать:"
# define MSG_FAN_SPEED "Куллер:"
# define MSG_FLOW "Поток:"
# define MSG_CONTROL "Настройки \003"
# define MSG_MIN "\002 Минимум:"
# define MSG_MAX "\002 Максимум:"
# define MSG_FACTOR "\002 Фактор:"
# define MSG_AUTOTEMP "Autotemp:"
2013-07-23 22:13:40 +02:00
# define MSG_ON "Вкл. "
# define MSG_OFF "Выкл. "
2014-02-13 12:58:14 +01:00
# define MSG_PID_P "PID-P: "
# define MSG_PID_I "PID-I: "
# define MSG_PID_D "PID-D: "
# define MSG_PID_C "PID-C: "
# define MSG_ACC "Acc:"
# define MSG_VXY_JERK "Vxy-jerk: "
2013-07-23 22:13:40 +02:00
# define MSG_VZ_JERK "Vz-jerk"
# define MSG_VE_JERK "Ve-jerk"
2014-02-13 12:58:14 +01:00
# define MSG_VMAX "Vmax "
2013-07-23 22:13:40 +02:00
# define MSG_X "x:"
# define MSG_Y "y:"
# define MSG_Z "z:"
# define MSG_E "e:"
2014-02-13 12:58:14 +01:00
# define MSG_VMIN "Vmin:"
# define MSG_VTRAV_MIN "VTrav min:"
# define MSG_AMAX "Amax "
# define MSG_A_RETRACT "A-retract:"
# define MSG_XSTEPS "X шаг / mm:"
# define MSG_YSTEPS "Y шаг / mm:"
# define MSG_ZSTEPS "Z шаг / mm:"
# define MSG_ESTEPS "E шаг / mm:"
# define MSG_RECTRACT "Откат подачи \x7E"
# define MSG_TEMPERATURE "Температура \x7E"
# define MSG_MOTION "Скорости \x7E"
# define MSG_CONTRAST "LCD contrast"
# define MSG_STORE_EPROM "Сохранить в EPROM"
# define MSG_LOAD_EPROM "Загруз. из EPROM"
# define MSG_RESTORE_FAILSAFE "С б р о с
# define MSG_REFRESH "\004О б о
# define MSG_WATCH "Обзор \003"
# define MSG_PREPARE "Действия \x7E"
# define MSG_TUNE "Настройки \x7E"
# define MSG_RESUME_PRINT "Продолжить печать"
# define MSG_RESUME_PRINT "Продолжить печать"
# define MSG_STOP_PRINT "Остановить печать"
# define MSG_CARD_MENU "Меню карты \x7E"
# define MSG_NO_CARD "Нет карты"
2013-07-23 22:13:40 +02:00
# define MSG_DWELL "Сон..."
2014-02-13 12:58:14 +01:00
# define MSG_USERWAIT "Ожиданиие"
# define MSG_RESUMING "Resuming print"
# define MSG_NO_MOVE "Нет движения."
# define MSG_KILLED "УБИТО."
# define MSG_STOPPED "ОСТАНОВЛЕНО."
# define MSG_CONTROL_RETRACT "Откат mm:"
# define MSG_CONTROL_RETRACTF "Откат F:"
# define MSG_CONTROL_RETRACT_ZLIFT "Прыжок mm:"
# define MSG_CONTROL_RETRACT_RECOVER "Возврат +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF "Возврат F:"
# define MSG_AUTORETRACT "АвтоОткат:"
# define MSG_FILAMENTCHANGE "Change filament"
2014-02-20 15:28:29 +01:00
# define MSG_INIT_SDCARD "Init. SD-Card"
2014-02-13 12:58:14 +01:00
# define MSG_CNG_SDCARD "Change SD-Card"
2014-02-20 15:28:29 +01:00
# define MSG_ZPROBE_OUT "Z probe out. bed"
# define MSG_POSITION_UNKNOWN "Home X / Y before Z"
# define MSG_ZPROBE_ZOFFSET "Z Offset"
2014-02-13 12:58:14 +01:00
# define MSG_BABYSTEP_X "Babystep X"
# define MSG_BABYSTEP_Y "Babystep Y"
# define MSG_BABYSTEP_Z "Babystep Z"
# define MSG_ENDSTOP_ABORT "Endstop abort"
# define MSG_CONTRAST "Contrast"
2013-07-23 21:49:37 +02:00
// Serial Console Messages
2013-07-23 22:13:40 +02:00
# define MSG_Enqueing "Запланировано \""
# define MSG_POWERUP "Включение питания"
# define MSG_EXTERNAL_RESET " Внешний с б р о с
# define MSG_BROWNOUT_RESET " Brown out с б р о с
# define MSG_WATCHDOG_RESET " Watchdog с б р о с
# define MSG_SOFTWARE_RESET " программный с б р о с
# define MSG_AUTHOR " | Автор: "
# define MSG_CONFIGURATION_VER " Последнее обновление: "
# define MSG_FREE_MEMORY " Памяти свободно: "
# define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Файл записан."
# define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:"
# define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:"
# define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:"
# define MSG_FILE_PRINTED "Печать файла завершена"
# define MSG_BEGIN_FILE_LIST "Список файлов"
# define MSG_END_FILE_LIST "Конец списка файлов"
# define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера "
# define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера "
2014-01-31 09:54:19 +01:00
# define MSG_M200_INVALID_EXTRUDER "M200 ошибка экструдера "
2013-07-23 22:13:40 +02:00
# define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера "
# define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры"
# define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера "
# define MSG_HEATING "Нагрев... "
# define MSG_HEATING_COMPLETE "Наргето. "
# define MSG_BED_HEATING "Нагрев стола... "
# define MSG_BED_DONE "Стол нагрет. "
2013-11-01 21:51:50 +01:00
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
2013-07-23 22:13:40 +02:00
# define MSG_COUNT_X " Count X:"
# define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!"
# define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
# define MSG_RESEND "Переотправка:"
# define MSG_UNKNOWN_COMMAND "Неизвестная команда:\""
# define MSG_ACTIVE_EXTRUDER "Активный экструдер: "
# define MSG_INVALID_EXTRUDER "Ошибка экструдера"
# define MSG_X_MIN "x_min:"
# define MSG_X_MAX "x_max:"
# define MSG_Y_MIN "y_min:"
# define MSG_Y_MAX "y_max:"
# define MSG_Z_MIN "z_min:"
# define MSG_Z_MAX "z_max:"
# define MSG_M119_REPORT "Статус концевиков"
# define MSG_ENDSTOP_HIT "Срабатывание концевика"
# define MSG_ENDSTOP_OPEN "Концевик освобожден"
# define MSG_HOTEND_OFFSET "Hotend offsets:"
# define MSG_SD_CANT_OPEN_SUBDIR "Н е
# define MSG_SD_INIT_FAIL "Ошибка инициализации SD"
# define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела"
# define MSG_SD_OPENROOT_FAIL "Н е
# define MSG_SD_CARD_OK "SD карта в порядке"
# define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку"
# define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: "
# define MSG_SD_FILE_OPENED "Файл открыт:"
# define MSG_SD_SIZE " Размер:"
# define MSG_SD_FILE_SELECTED "Файл выбран"
# define MSG_SD_WRITE_TO_FILE "Запись в файл: "
# define MSG_SD_PRINTING_BYTE "SD печать byte "
# define MSG_SD_NOT_PRINTING "нет SD печати"
# define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл"
# define MSG_SD_CANT_ENTER_SUBDIR "Н е
# define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : "
# define MSG_ENDSTOPS_HIT "концевик сработал: "
# define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
# define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEPPING_X "Babystepping X"
# define MSG_BABYSTEPPING_Y "Babystepping Y"
# define MSG_BABYSTEPPING_Z "Babystepping Z"
2014-02-12 14:21:26 +01:00
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
2013-07-23 21:49:37 +02:00
# endif
# if LANGUAGE_CHOICE == 7
2014-02-12 14:21:26 +01:00
// LCD Menu Messages
// Please note these are limited to 17 characters!
# define WELCOME_MSG MACHINE_NAME " pronto."
2013-07-23 21:49:37 +02:00
# define MSG_SD_INSERTED "SD Card inserita"
# define MSG_SD_REMOVED "SD Card rimossa"
# define MSG_MAIN "Menu principale"
# define MSG_AUTOSTART "Autostart"
# define MSG_DISABLE_STEPPERS "Disabilita Motori"
# define MSG_AUTO_HOME "Auto Home"
# define MSG_SET_ORIGIN "Imposta Origine"
# define MSG_PREHEAT_PLA "Preriscalda PLA"
# define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
# define MSG_PREHEAT_ABS "Preriscalda ABS"
2013-06-20 23:59:56 +02:00
# define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
2013-07-23 21:49:37 +02:00
# define MSG_COOLDOWN "Raffredda"
# define MSG_SWITCH_PS_ON "Switch Power On"
2013-06-20 23:59:56 +02:00
# define MSG_SWITCH_PS_OFF "Switch Power Off"
2013-07-23 21:49:37 +02:00
# define MSG_EXTRUDE "Estrudi"
# define MSG_RETRACT "Ritrai"
# define MSG_MOVE_AXIS "Muovi Asse"
2014-02-11 14:54:43 +01:00
# define MSG_MOVE_X "Move X"
# define MSG_MOVE_Y "Move Y"
# define MSG_MOVE_Z "Move Z"
# define MSG_MOVE_E "Extruder"
# define MSG_MOVE_01MM "Move 0.1mm"
# define MSG_MOVE_1MM "Move 1mm"
# define MSG_MOVE_10MM "Move 10mm"
2013-07-23 21:49:37 +02:00
# define MSG_SPEED "Velcità"
# define MSG_NOZZLE "Ugello"
# define MSG_NOZZLE1 "Ugello2"
# define MSG_NOZZLE2 "Ugello3"
# define MSG_BED "Piatto"
# define MSG_FAN_SPEED "Ventola"
# define MSG_FLOW "Flusso"
# define MSG_CONTROL "Controllo"
# define MSG_MIN " \002 Min:"
# define MSG_MAX " \002 Max:"
# define MSG_FACTOR " \002 Fact:"
# define MSG_AUTOTEMP "Autotemp"
# define MSG_ON "On "
# define MSG_OFF "Off"
# define MSG_PID_P "PID-P"
# define MSG_PID_I "PID-I"
# define MSG_PID_D "PID-D"
# define MSG_PID_C "PID-C"
# define MSG_ACC "Accel"
# define MSG_VXY_JERK "Vxy-jerk"
# define MSG_VZ_JERK "Vz-jerk"
# define MSG_VE_JERK "Ve-jerk"
# define MSG_VMAX "Vmax"
# define MSG_X "x"
# define MSG_Y "y"
# define MSG_Z "z"
# define MSG_E "e"
# define MSG_VMIN "Vmin"
# define MSG_VTRAV_MIN "VTrav min"
# define MSG_AMAX "Amax"
# define MSG_A_RETRACT "A-retract"
# define MSG_XSTEPS "Xpassi / mm"
# define MSG_YSTEPS "Ypassi / mm"
# define MSG_ZSTEPS "Zpassi / mm"
# define MSG_ESTEPS "Epassi / mm"
# define MSG_RECTRACT "Ritrai"
# define MSG_TEMPERATURE "Temperatura"
# define MSG_MOTION "Movimento"
# define MSG_CONTRAST "LCD contrast"
# define MSG_STORE_EPROM "Salva in EEPROM"
# define MSG_LOAD_EPROM "Carica da EEPROM"
# define MSG_RESTORE_FAILSAFE "Impostaz. default"
# define MSG_REFRESH "Aggiorna"
# define MSG_WATCH "Guarda"
# define MSG_PREPARE "Prepara"
# define MSG_TUNE "Adatta"
# define MSG_PAUSE_PRINT "Pausa"
# define MSG_RESUME_PRINT "Riprendi Stampa"
# define MSG_STOP_PRINT "Arresta Stampa"
# define MSG_CARD_MENU "SD Card Menu"
# define MSG_NO_CARD "No SD Card"
# define MSG_DWELL "Sospensione..."
# define MSG_USERWAIT "Attendi Utente..."
# define MSG_RESUMING "Riprendi Stampa"
# define MSG_NO_MOVE "Nessun Movimento."
# define MSG_KILLED "UCCISO. "
# define MSG_STOPPED "ARRESTATO. "
# define MSG_CONTROL_RETRACT "Ritrai mm"
# define MSG_CONTROL_RETRACTF "Ritrai F"
# define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
# define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
# define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
# define MSG_AUTORETRACT "AutoArretramento"
# define MSG_FILAMENTCHANGE "Cambia filamento"
# define MSG_INIT_SDCARD "Iniz. SD-Card"
# define MSG_CNG_SDCARD "Cambia SD-Card"
2014-02-20 15:28:29 +01:00
# define MSG_ZPROBE_OUT "Z probe out. bed"
# define MSG_POSITION_UNKNOWN "Home X / Y before Z"
# define MSG_ZPROBE_ZOFFSET "Z Offset"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEP_X "Babystep X"
# define MSG_BABYSTEP_Y "Babystep Y"
# define MSG_BABYSTEP_Z "Babystep Z"
# define MSG_ENDSTOP_ABORT "Endstop abort"
# define MSG_CONTRAST "Contrast"
2013-07-23 21:49:37 +02:00
2014-02-12 14:21:26 +01:00
// Serial Console Messages
2013-07-23 21:49:37 +02:00
# define MSG_Enqueing "accodamento \""
# define MSG_POWERUP "Accensione"
# define MSG_EXTERNAL_RESET " Reset Esterno"
# define MSG_BROWNOUT_RESET " Brown out Reset"
# define MSG_WATCHDOG_RESET " Watchdog Reset"
# define MSG_SOFTWARE_RESET " Software Reset"
# define MSG_AUTHOR " | Autore: "
# define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: "
# define MSG_FREE_MEMORY " Memoria Libera: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "File Salvato."
# define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: "
# define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: "
# define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: "
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: "
# define MSG_FILE_PRINTED "File stampato"
# define MSG_BEGIN_FILE_LIST "Inizio Lista File"
# define MSG_END_FILE_LIST "Fine Lista File"
# define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
# define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
2014-01-31 09:54:19 +01:00
# define MSG_M200_INVALID_EXTRUDER "M200 Estrusore non valido "
2013-07-23 21:49:37 +02:00
# define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido "
# define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura"
# define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
# define MSG_HEATING "Riscaldamento..."
# define MSG_HEATING_COMPLETE "Stampante Calda."
# define MSG_BED_HEATING "Riscaldamento Piatto."
# define MSG_BED_DONE "Piatto Pronto."
2013-11-01 21:51:50 +01:00
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
2013-07-23 21:49:37 +02:00
# define MSG_COUNT_X " Calcola X: "
# define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!"
# define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
# define MSG_RESEND "Reinviato:"
# define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \""
# define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: "
# define MSG_INVALID_EXTRUDER "Estrusore non valido"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Segnalazione stato degli endstop"
# define MSG_ENDSTOP_HIT "INNESCATO"
# define MSG_ENDSTOP_OPEN "aperto"
# define MSG_HOTEND_OFFSET "Hotend offsets:"
# define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella"
# define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD"
# define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume"
# define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale"
# define MSG_SD_CARD_OK "SD card ok"
# define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro"
# define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: "
# define MSG_SD_FILE_OPENED "File aperto: "
# define MSG_SD_SIZE " Dimensione: "
# define MSG_SD_FILE_SELECTED "File selezionato"
# define MSG_SD_WRITE_TO_FILE "Scrittura su file: "
# define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD "
# define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD"
# define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
# define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: "
# define MSG_STEPPER_TOO_HIGH "Steprate troppo alto: "
# define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
# define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
# define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEPPING_X "Babystepping X"
# define MSG_BABYSTEPPING_Y "Babystepping Y"
# define MSG_BABYSTEPPING_Z "Babystepping Z"
2014-02-12 14:21:26 +01:00
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
2013-07-23 21:49:37 +02:00
# endif
# if LANGUAGE_CHOICE == 8
// LCD Menu Messages
2014-02-12 14:21:26 +01:00
// Please note these are limited to 17 characters!
# define WELCOME_MSG MACHINE_NAME " pronto."
# define MSG_SD_INSERTED "Cartao inserido"
# define MSG_SD_REMOVED "Cartao removido"
# define MSG_MAIN " Menu principal \003"
# define MSG_AUTOSTART "Autostart"
# define MSG_DISABLE_STEPPERS " Apagar motores"
# define MSG_AUTO_HOME "Ir para origen"
# define MSG_SET_ORIGIN "Estabelecer orig."
# define MSG_PREHEAT_PLA "Pre-aquecer PLA"
# define MSG_PREHEAT_PLA_SETTINGS "PLA setting"
# define MSG_PREHEAT_ABS "Pre-aquecer ABS"
# define MSG_PREHEAT_ABS_SETTINGS "ABS setting"
# define MSG_COOLDOWN "Esfriar"
2013-07-23 21:49:37 +02:00
# define MSG_SWITCH_PS_ON "Switch Power On"
# define MSG_SWITCH_PS_OFF "Switch Power Off"
2014-02-12 14:21:26 +01:00
# define MSG_EXTRUDE "Extrudar"
# define MSG_RETRACT "Retrair"
# define MSG_PREHEAT_PLA "Pre-aquecer PLA"
# define MSG_PREHEAT_ABS "Pre-aquecer ABS"
# define MSG_MOVE_AXIS "Mover eixo \x7E"
2014-02-11 14:54:43 +01:00
# define MSG_MOVE_X "Move X"
# define MSG_MOVE_Y "Move Y"
# define MSG_MOVE_Z "Move Z"
# define MSG_MOVE_E "Extruder"
# define MSG_MOVE_01MM "Move 0.1mm"
# define MSG_MOVE_1MM "Move 1mm"
# define MSG_MOVE_10MM "Move 10mm"
2014-02-12 14:21:26 +01:00
# define MSG_SPEED "Velocidade:"
# define MSG_NOZZLE "\002Nozzle:"
# define MSG_NOZZLE1 "\002Nozzle2:"
# define MSG_NOZZLE2 "\002Nozzle3:"
# define MSG_BED "\002Base:"
# define MSG_FAN_SPEED "Velocidade vento."
# define MSG_FLOW "Fluxo:"
# define MSG_CONTROL "Controle \003"
# define MSG_MIN "\002 Min:"
# define MSG_MAX "\002 Max:"
# define MSG_FACTOR "\002 Fact:"
# define MSG_AUTOTEMP "Autotemp:"
2013-07-23 21:49:37 +02:00
# define MSG_ON "On "
# define MSG_OFF "Off"
2014-02-12 14:21:26 +01:00
# define MSG_PID_P "PID-P: "
# define MSG_PID_I "PID-I: "
# define MSG_PID_D "PID-D: "
# define MSG_PID_C "PID-C: "
# define MSG_ACC "Acc:"
# define MSG_VXY_JERK "Vxy-jerk: "
2013-07-23 21:49:37 +02:00
# define MSG_VZ_JERK "Vz-jerk"
# define MSG_VE_JERK "Ve-jerk"
# define MSG_VMAX " Vmax "
# define MSG_X "x:"
# define MSG_Y "y:"
# define MSG_Z "z:"
# define MSG_E "e:"
2014-02-12 14:21:26 +01:00
# define MSG_VMIN "Vmin:"
# define MSG_VTRAV_MIN "VTrav min:"
# define MSG_AMAX "Amax "
# define MSG_A_RETRACT "A-retract:"
# define MSG_XSTEPS "Xpasso / mm:"
# define MSG_YSTEPS "Ypasso / mm:"
# define MSG_ZSTEPS "Zpasso / mm:"
# define MSG_ESTEPS "Epasso / mm:"
# define MSG_MAIN_WIDE "Menu Principal \003"
2013-07-23 22:11:54 +02:00
# define MSG_RECTRACT "Retrair"
# define MSG_TEMPERATURE "Temperatura"
# define MSG_MOTION "Movimento"
2014-02-12 14:21:26 +01:00
# define MSG_STORE_EPROM "Guardar memoria"
# define MSG_LOAD_EPROM "Carregar memoria"
# define MSG_RESTORE_FAILSAFE "Rest. de emergen."
2013-07-23 21:49:37 +02:00
# define MSG_REFRESH "\004Recarregar"
2014-02-12 14:21:26 +01:00
# define MSG_WATCH "Monitorar \003"
# define MSG_PREPARE "Preparar \x7E"
# define MSG_PREPARE_ALT "Preparar \003"
# define MSG_CONTROL_ARROW "Controle \x7E"
# define MSG_RETRACT_ARROW "Retrair \x7E"
# define MSG_TUNE "Tune \x7E"
# define MSG_PAUSE_PRINT "Pausar impressao"
# define MSG_RESUME_PRINT "Resumir impressao"
# define MSG_STOP_PRINT "Parar impressao"
# define MSG_CARD_MENU "Menu cartao SD"
# define MSG_NO_CARD "Sem cartao SD"
2013-07-23 21:49:37 +02:00
# define MSG_DWELL "Repouso..."
2014-02-12 14:21:26 +01:00
# define MSG_USERWAIT "Esperando ordem"
2013-07-23 22:11:54 +02:00
# define MSG_RESUMING "Resuming print"
2014-02-12 14:21:26 +01:00
# define MSG_NO_MOVE "Sem movimento"
# define MSG_KILLED "PARADA DE EMERG."
2013-07-23 21:49:37 +02:00
# define MSG_STOPPED "PARADA. "
# define MSG_STEPPER_RELEASED "Lancado."
# define MSG_CONTROL_RETRACT " Retrair mm:"
# define MSG_CONTROL_RETRACTF " Retrair F:"
# define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
# define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
# define MSG_AUTORETRACT " AutoRetr.:"
# define MSG_FILAMENTCHANGE "Change filament"
2014-02-20 15:28:29 +01:00
# define MSG_INIT_SDCARD "Init. SD-Card"
2013-07-23 22:11:54 +02:00
# define MSG_CNG_SDCARD "Change SD-Card"
2014-02-20 15:28:29 +01:00
# define MSG_ZPROBE_OUT "Son. fora da mesa"
# define MSG_POSITION_UNKNOWN "XY antes de Z"
# define MSG_ZPROBE_ZOFFSET "Z Offset"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEP_X "Babystep X"
# define MSG_BABYSTEP_Y "Babystep Y"
# define MSG_BABYSTEP_Z "Babystep Z"
# define MSG_ENDSTOP_ABORT "Endstop abort"
# define MSG_CONTRAST "Contrast"
2013-07-23 21:49:37 +02:00
// Serial Console Messages
# define MSG_Enqueing "enqueing \""
# define MSG_POWERUP "PowerUp"
# define MSG_EXTERNAL_RESET " Reset Externo"
# define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
# define MSG_WATCHDOG_RESET " Reset por Bloqueio"
# define MSG_SOFTWARE_RESET " Reset por Software"
# define MSG_AUTHOR " | Author: "
# define MSG_CONFIGURATION_VER " Ultima atualizacao: "
# define MSG_FREE_MEMORY " memoria Livre: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Guardado."
# define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
# define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
# define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
# define MSG_FILE_PRINTED "Impressao terminada"
# define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
# define MSG_END_FILE_LIST "Fim da lista de arquivos"
# define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
# define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
2014-01-31 09:54:19 +01:00
# define MSG_M200_INVALID_EXTRUDER "M200 Extrusor inválido "
2013-07-23 21:49:37 +02:00
# define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido "
# define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
# define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
# define MSG_HEATING "Aquecendo..."
# define MSG_HEATING_COMPLETE "Aquecido."
# define MSG_BED_HEATING "Aquecendo a Base."
# define MSG_BED_DONE "Base quente."
2013-11-01 21:51:50 +01:00
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
2013-07-23 21:49:37 +02:00
# define MSG_COUNT_X " Conta X:"
# define MSG_ERR_KILLED "Impressora parada com kill() !!"
# define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
# define MSG_RESEND "Reenviar:"
# define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
# define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
# define MSG_INVALID_EXTRUDER "Extrusor invalido"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Relatando estado do ponto final"
# define MSG_ENDSTOP_HIT "PULSADO"
# define MSG_ENDSTOP_OPEN "Aberto"
# define MSG_HOTEND_OFFSET "Hotend offsets:"
# define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
# define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
# define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
# define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
# define MSG_SD_CARD_OK "cartao SD ok"
# define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
# define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
# define MSG_SD_FILE_OPENED "Arquivo aberto:"
# define MSG_SD_SIZE " Size:"
# define MSG_SD_FILE_SELECTED "Arquivo selecionado"
# define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
# define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
# define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
# define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
# define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
# define MSG_STEPPER_TOO_HIGH "Steprate muito alto : "
# define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
# define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
# define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEPPING_X "Babystepping X"
# define MSG_BABYSTEPPING_Y "Babystepping Y"
# define MSG_BABYSTEPPING_Z "Babystepping Z"
2014-02-12 14:21:26 +01:00
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
2013-07-23 21:49:37 +02:00
# endif
# if LANGUAGE_CHOICE == 9
// LCD Menu Messages
2014-02-12 14:21:26 +01:00
// Please note these are limited to 17 characters!
# define WELCOME_MSG MACHINE_NAME " valmis."
2013-07-23 21:49:37 +02:00
# define MSG_SD_INSERTED "Kortti asetettu"
# define MSG_SD_REMOVED "Kortti poistettu"
# define MSG_MAIN "Palaa"
# define MSG_AUTOSTART "Automaatti"
# define MSG_DISABLE_STEPPERS "Vapauta moottorit"
# define MSG_AUTO_HOME "Aja referenssiin"
# define MSG_SET_ORIGIN "Aseta origo"
# define MSG_PREHEAT_PLA "Esilammita PLA"
2014-02-12 14:21:26 +01:00
# define MSG_PREHEAT_PLA_SETTINGS "Esilamm. PLA konf"
2013-07-23 21:49:37 +02:00
# define MSG_PREHEAT_ABS "Esilammita ABS"
2014-02-12 14:21:26 +01:00
# define MSG_PREHEAT_ABS_SETTINGS "Esilamm. ABS konf"
2013-07-23 21:49:37 +02:00
# define MSG_COOLDOWN "Jaahdyta"
# define MSG_SWITCH_PS_ON "Switch Power On"
# define MSG_SWITCH_PS_OFF "Switch Power Off"
# define MSG_EXTRUDE "Pursota"
# define MSG_RETRACT "Veda takaisin"
# define MSG_MOVE_AXIS "Liikuta akseleita"
2014-02-11 14:54:43 +01:00
# define MSG_MOVE_X "Move X"
# define MSG_MOVE_Y "Move Y"
# define MSG_MOVE_Z "Move Z"
# define MSG_MOVE_E "Extruder"
# define MSG_MOVE_01MM "Move 0.1mm"
# define MSG_MOVE_1MM "Move 1mm"
# define MSG_MOVE_10MM "Move 10mm"
2013-07-23 21:49:37 +02:00
# define MSG_SPEED "Nopeus"
# define MSG_NOZZLE "Suutin"
# define MSG_NOZZLE1 "Suutin2"
# define MSG_NOZZLE2 "Suutin3"
# define MSG_BED "Alusta"
# define MSG_FAN_SPEED "Tuul. nopeus"
# define MSG_FLOW "Virtaus"
# define MSG_CONTROL "Kontrolli"
# define MSG_MIN " \002 Min"
# define MSG_MAX " \002 Max"
# define MSG_FACTOR " \002 Kerr"
# define MSG_AUTOTEMP "Autotemp"
# define MSG_ON "On "
# define MSG_OFF "Off"
# define MSG_PID_P "PID-P"
# define MSG_PID_I "PID-I"
# define MSG_PID_D "PID-D"
# define MSG_PID_C "PID-C"
# define MSG_ACC "Kiihtyv"
# define MSG_VXY_JERK "Vxy-jerk"
# define MSG_VZ_JERK "Vz-jerk"
# define MSG_VE_JERK "Ve-jerk"
# define MSG_VMAX "Vmax "
# define MSG_X "x"
# define MSG_Y "y"
# define MSG_Z "z"
# define MSG_E "e"
# define MSG_VMIN "Vmin"
# define MSG_VTRAV_MIN "VLiike min"
# define MSG_AMAX "Amax "
# define MSG_A_RETRACT "A-peruuta"
# define MSG_XSTEPS "Xsteps / mm"
# define MSG_YSTEPS "Ysteps / mm"
# define MSG_ZSTEPS "Zsteps / mm"
# define MSG_ESTEPS "Esteps / mm"
# define MSG_RECTRACT "Veda takaisin"
# define MSG_TEMPERATURE "Lampotila"
# define MSG_MOTION "Liike"
# define MSG_CONTRAST "LCD contrast"
# define MSG_STORE_EPROM "Tallenna muistiin"
# define MSG_LOAD_EPROM "Lataa muistista"
# define MSG_RESTORE_FAILSAFE "Palauta oletus"
# define MSG_REFRESH "Paivita"
# define MSG_WATCH "Seuraa"
# define MSG_PREPARE "Valmistele"
# define MSG_TUNE "Saada"
# define MSG_PAUSE_PRINT "Keskeyta tulostus"
# define MSG_RESUME_PRINT "Jatka tulostusta"
# define MSG_STOP_PRINT "Pysayta tulostus"
# define MSG_CARD_MENU "Korttivalikko"
# define MSG_NO_CARD "Ei korttia"
# define MSG_DWELL "Nukkumassa..."
2014-02-12 14:21:26 +01:00
# define MSG_USERWAIT "Odotet. valintaa"
# define MSG_RESUMING "Jatke. tulostusta"
2013-07-23 21:49:37 +02:00
# define MSG_NO_MOVE "Ei liiketta."
# define MSG_KILLED "KILLED. "
# define MSG_STOPPED "STOPPED. "
# define MSG_CONTROL_RETRACT "Veda mm"
# define MSG_CONTROL_RETRACTF "Veda F"
# define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
# define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
# define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
# define MSG_AUTORETRACT "AutoVeto."
# define MSG_FILAMENTCHANGE "Change filament"
2014-02-20 15:28:29 +01:00
# define MSG_INIT_SDCARD "Init. SD-Card"
2013-07-23 22:11:54 +02:00
# define MSG_CNG_SDCARD "Change SD-Card"
2014-02-20 15:28:29 +01:00
# define MSG_ZPROBE_OUT "Z probe out. bed"
# define MSG_POSITION_UNKNOWN "Home X / Y before Z"
# define MSG_ZPROBE_ZOFFSET "Z Offset"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEP_X "Babystep X"
# define MSG_BABYSTEP_Y "Babystep Y"
# define MSG_BABYSTEP_Z "Babystep Z"
# define MSG_ENDSTOP_ABORT "Endstop abort"
# define MSG_CONTRAST "Contrast"
2013-07-23 21:49:37 +02:00
// Serial Console Messages
# define MSG_Enqueing "jonoon \""
# define MSG_POWERUP "Kaynnistys"
# define MSG_EXTERNAL_RESET " Ulkoinen Reset"
# define MSG_BROWNOUT_RESET " Alajannite Reset"
# define MSG_WATCHDOG_RESET " Vahtikoira Reset"
# define MSG_SOFTWARE_RESET " Ohjelmisto Reset"
# define MSG_AUTHOR " | Author: "
# define MSG_CONFIGURATION_VER " Paivitetty viimeksi: "
# define MSG_FREE_MEMORY " Vapaata muistia: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Tiedosto tallennettu."
# define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: "
# define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: "
# define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: "
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: "
# define MSG_FILE_PRINTED "Tiedoston tulostus valmis"
# define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku"
# define MSG_END_FILE_LIST "Tiedostolistauksen loppu"
# define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin "
# define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin "
2014-01-31 09:54:19 +01:00
# define MSG_M200_INVALID_EXTRUDER "M200 Virheellinen suutin "
2013-07-23 21:49:37 +02:00
# define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin "
# define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja"
# define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin "
# define MSG_HEATING "Lammitan..."
# define MSG_HEATING_COMPLETE "Lammitys valmis."
# define MSG_BED_HEATING "Alusta lampiaa."
# define MSG_BED_DONE "Alusta valmis."
2013-11-01 21:51:50 +01:00
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
2013-07-23 21:49:37 +02:00
# define MSG_COUNT_X " Laskuri X: "
# define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!"
# define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)"
# define MSG_RESEND "Uudelleenlahetys: "
# define MSG_UNKNOWN_COMMAND "Tuntematon komento: \""
# define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: "
# define MSG_INVALID_EXTRUDER "Virheellinen suutin"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Rajakytkimien tilaraportti"
# define MSG_ENDSTOP_HIT "AKTIIVISENA"
# define MSG_ENDSTOP_OPEN "avoinna"
# define MSG_HOTEND_OFFSET "Hotend offsets:"
# define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata"
# define MSG_SD_INIT_FAIL "SD alustus epaonnistui"
# define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui"
# define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui"
# define MSG_SD_CARD_OK "SD kortti ok"
# define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui"
# define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: "
# define MSG_SD_FILE_OPENED "Tiedosto avattu: "
# define MSG_SD_SIZE " Koko: "
# define MSG_SD_FILE_SELECTED "Tiedosto valittu"
# define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: "
# define MSG_SD_PRINTING_BYTE "SD tulostus byte "
# define MSG_SD_NOT_PRINTING "Ei SD tulostus"
# define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon"
# define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: "
# define MSG_STEPPER_TOO_HIGH "Askellustaajuus liian suuri: "
# define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: "
# define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty"
# define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty"
2014-02-11 14:54:43 +01:00
# define MSG_BABYSTEPPING_X "Babystepping X"
# define MSG_BABYSTEPPING_Y "Babystepping Y"
# define MSG_BABYSTEPPING_Z "Babystepping Z"
# define MSG_ENDSTOP_ABORT "Endstop abort"
# define MSG_CONTRAST "Contrast"
2014-02-12 14:21:26 +01:00
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
2013-07-23 21:49:37 +02:00
# endif
2014-02-11 14:54:43 +01:00
2014-02-09 18:19:37 +01:00
# if LANGUAGE_CHOICE == 10
// LCD Menu Messages
2014-02-12 14:21:26 +01:00
// Please note these are limited to 17 characters!
# define WELCOME_MSG MACHINE_NAME " parada."
# define MSG_SD_INSERTED "Tarcheta colocada"
# define MSG_SD_REMOVED "Tarcheta retirada"
# define MSG_MAIN "Menu prencipal"
2014-02-09 18:19:37 +01:00
# define MSG_AUTOSTART " Autostart"
2014-02-12 14:21:26 +01:00
# define MSG_DISABLE_STEPPERS "Amortar motors"
# define MSG_AUTO_HOME "Levar a l'orichen"
# define MSG_SET_ORIGIN "Establir zero"
2014-02-09 18:19:37 +01:00
# define MSG_PREHEAT_PLA "Precalentar PLA"
2014-02-12 14:21:26 +01:00
# define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA"
2014-02-09 18:19:37 +01:00
# define MSG_PREHEAT_ABS "Precalentar ABS"
2014-02-12 14:21:26 +01:00
# define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS"
2014-02-09 18:19:37 +01:00
# define MSG_COOLDOWN "Enfriar"
# define MSG_SWITCH_PS_ON "Enchegar Fuent"
# define MSG_SWITCH_PS_OFF "Desenchegar Fuent"
# define MSG_EXTRUDE "Extruir"
# define MSG_RETRACT "Retraer"
# define MSG_MOVE_AXIS "Mover Eixes"
2014-02-11 15:40:53 +01:00
# define MSG_MOVE_X "Move X"
# define MSG_MOVE_Y "Move Y"
# define MSG_MOVE_Z "Move Z"
# define MSG_MOVE_E "Extruder"
# define MSG_MOVE_01MM "Move 0.1mm"
# define MSG_MOVE_1MM "Move 1mm"
# define MSG_MOVE_10MM "Move 10mm"
2014-02-09 18:19:37 +01:00
# define MSG_SPEED "Velocidat"
# define MSG_NOZZLE "Nozzle"
# define MSG_NOZZLE1 "Nozzle2"
# define MSG_NOZZLE2 "Nozzle3"
# define MSG_BED "Base"
# define MSG_FAN_SPEED "Ixoriador"
# define MSG_FLOW "Fluxo"
# define MSG_CONTROL "Control"
# define MSG_MIN "\002 Min"
# define MSG_MAX "\002 Max"
# define MSG_FACTOR "\002 Fact"
# define MSG_AUTOTEMP "Autotemp"
# define MSG_ON "On"
# define MSG_OFF "Off"
# define MSG_PID_P "PID-P"
# define MSG_PID_I "PID-I"
# define MSG_PID_D "PID-D"
# define MSG_PID_C "PID-C"
# define MSG_ACC "Acel"
# define MSG_VXY_JERK "Vxy-jerk"
# define MSG_VZ_JERK "Vz-jerk"
# define MSG_VE_JERK "Ves-jerk"
# define MSG_VMAX "Vmax"
# define MSG_X "x"
# define MSG_Y "y"
# define MSG_Z "z"
# define MSG_E "y"
# define MSG_VMIN "Vmin"
# define MSG_VTRAV_MIN "VTrav min"
# define MSG_AMAX "Amax"
# define MSG_A_RETRACT "A-retrac."
# define MSG_XSTEPS "X trangos / mm"
# define MSG_YSTEPS "Y trangos / mm"
# define MSG_ZSTEPS "Z trangos / mm"
# define MSG_ESTEPS "E trangos / mm"
# define MSG_RECTRACT "Retraer"
# define MSG_TEMPERATURE "Temperatura"
# define MSG_MOTION "Movimiento"
# define MSG_STORE_EPROM "Alzar Memoria"
# define MSG_LOAD_EPROM "Cargar Memoria"
2014-02-12 14:21:26 +01:00
# define MSG_RESTORE_FAILSAFE "Rest. d'emerchen."
2014-02-09 18:19:37 +01:00
# define MSG_REFRESH "Tornar a cargar"
# define MSG_WATCH "Monitorizar"
# define MSG_PREPARE "Preparar"
# define MSG_TUNE "Achustar"
2014-02-12 14:21:26 +01:00
# define MSG_PAUSE_PRINT "Pausar impresion"
# define MSG_RESUME_PRINT "Contin. impresion"
2014-02-09 18:19:37 +01:00
# define MSG_STOP_PRINT "Detener Impresion"
# define MSG_CARD_MENU "Menu de SD"
2014-02-12 14:21:26 +01:00
# define MSG_NO_CARD "No i hai tarcheta"
2014-02-09 18:19:37 +01:00
# define MSG_DWELL "Reposo..."
2014-02-12 14:21:26 +01:00
# define MSG_USERWAIT "Asperan. ordines"
# define MSG_RESUMING "Contin. impresion"
2014-02-09 18:19:37 +01:00
# define MSG_NO_MOVE "Sin movimiento"
2014-02-12 14:21:26 +01:00
# define MSG_KILLED "ATURADA D'EMERCH."
2014-02-09 18:19:37 +01:00
# define MSG_STOPPED "ATURADA."
# define MSG_CONTROL_RETRACT "Retraer mm"
# define MSG_CONTROL_RETRACTF "Retraer F"
# define MSG_CONTROL_RETRACT_ZLIFT "Devantar mm"
# define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
# define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
# define MSG_AUTORETRACT "AutoRetr."
# define MSG_FILAMENTCHANGE "Cambear"
2014-02-12 14:21:26 +01:00
# define MSG_INIT_SDCARD "Encetan. tarcheta"
# define MSG_CNG_SDCARD "Cambiar tarcheta"
2014-02-09 18:19:37 +01:00
# define MSG_RECTRACT_WIDE "Retraer"
# define MSG_TEMPERATURE_WIDE "Temperatura"
# define MSG_TEMPERATURE_RTN "Temperatura"
# define MSG_MAIN_WIDE "Menu Prencipal"
# define MSG_MOTION_WIDE "Movimiento"
# define MSG_PREPARE_ALT "Preparar"
# define MSG_CONTROL_ARROW "Control"
# define MSG_RETRACT_ARROW "Retraer"
# define MSG_STEPPER_RELEASED "Desacoplada."
2014-02-20 15:28:29 +01:00
# define MSG_ZPROBE_OUT "Z probe out. bed"
# define MSG_POSITION_UNKNOWN "Home X / Y before Z"
# define MSG_ZPROBE_ZOFFSET "Z Offset"
2014-02-11 15:40:53 +01:00
# define MSG_BABYSTEP_X "Babystep X"
# define MSG_BABYSTEP_Y "Babystep Y"
# define MSG_BABYSTEP_Z "Babystep Z"
# define MSG_ENDSTOP_ABORT "Endstop abort"
# define MSG_CONTRAST "Contrast"
2014-02-09 18:19:37 +01:00
// Serial Console Messages
# define MSG_Enqueing "En coda \""
# define MSG_POWERUP "PowerUp"
# define MSG_EXTERNAL_RESET " Reset Externo"
# define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
# define MSG_WATCHDOG_RESET " Reset por Bloqueo"
# define MSG_SOFTWARE_RESET " Reset por Software"
# define MSG_AUTHOR " | Autor: "
# define MSG_CONFIGURATION_VER " Zaguer esvielle: "
# define MSG_FREE_MEMORY " Memoria libre: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Guardau."
# define MSG_ERR_LINE_NO "O Numero de Linea no ye igual a l'Ultimo Numero de Linea+1, Ultima Linea:"
# define MSG_ERR_CHECKSUM_MISMATCH "o checksum no coincide, Ultima Linea:"
# define MSG_ERR_NO_CHECKSUM "No se podió trobar o Checksum con o numero de linea, Ultima Linea:"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se trobo o Numero de Linea con o Checksum, Ultima Linea:"
# define MSG_FILE_PRINTED "Impresion rematada"
# define MSG_BEGIN_FILE_LIST "Prencipio d'a lista de fichero"
# define MSG_END_FILE_LIST "Fin d'a lista de fichero"
# define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
# define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
# define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalido "
# define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
# define MSG_ERR_NO_THERMISTORS "No i hai termistores - no temp"
# define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
# define MSG_HEATING "Calentando..."
# define MSG_HEATING_COMPLETE "Calentamiento Feito."
# define MSG_BED_HEATING "Calentando la base."
# define MSG_BED_DONE "Base Calient."
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
# define MSG_COUNT_X " Cuenta X:"
# define MSG_ERR_KILLED "Impresora Aturada con kill()!!"
# define MSG_ERR_STOPPED "Impresora aturada por errors. Apanye a error y use M999 Ta reiniciar!. (a temperatura se reestablece. Ajustela antes de continar)"
# define MSG_RESEND "Reninviar:"
# define MSG_UNKNOWN_COMMAND "Comando Desconoixiu:\""
# define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
# define MSG_INVALID_EXTRUDER "Extrusor Invalido"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Comprobando fins de corrida."
# define MSG_ENDSTOP_HIT "PULSAU"
# define MSG_ENDSTOP_OPEN "ubierto"
# define MSG_HOTEND_OFFSET "Hotend offsets:"
# define MSG_SD_CANT_OPEN_SUBDIR "No se podió ubrir a subcarpeta."
# define MSG_SD_INIT_FAIL "Fallo en encetar a SD"
# define MSG_SD_VOL_INIT_FAIL "Fallo en amontar o volumen"
# define MSG_SD_OPENROOT_FAIL "Fallo en ubrir a carpeta raiz"
# define MSG_SD_CARD_OK "Tarcheta SD OK"
# define MSG_SD_WORKDIR_FAIL "Fallo en ubrir a carpeta de treballo"
# define MSG_SD_OPEN_FILE_FAIL "Error en ubrir, Fichero: "
# define MSG_SD_FILE_OPENED "Fichero ubierto:"
# define MSG_SD_SIZE " Grandaria:"
# define MSG_SD_FILE_SELECTED "Fichero Seleccionau"
# define MSG_SD_WRITE_TO_FILE "Escribindo en o fichero: "
# define MSG_SD_PRINTING_BYTE "SD imprentando o byte "
# define MSG_SD_NOT_PRINTING "No se ye imprentando con SD"
# define MSG_SD_ERR_WRITE_TO_FILE "Error en escribir en o fichero"
# define MSG_SD_CANT_ENTER_SUBDIR "No se puede ubrir a carpeta:"
# define MSG_STEPPER_TOO_HIGH "Steprate masiau alto : "
# define MSG_ENDSTOPS_HIT "S'ha tocau a fin de carril: "
# define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria privada"
# define MSG_ERR_LONG_EXTRUDE_STOP " extrusion masiau larga privada"
2014-02-11 15:40:53 +01:00
# define MSG_BABYSTEPPING_X "Babystepping X"
# define MSG_BABYSTEPPING_Y "Babystepping Y"
# define MSG_BABYSTEPPING_Z "Babystepping Z"
2014-02-12 14:21:26 +01:00
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
2014-02-09 18:19:37 +01:00
2013-07-23 21:49:37 +02:00
# endif
2014-02-11 15:35:28 +01:00
2014-02-17 17:00:50 +01:00
# if LANGUAGE_CHOICE == 11 //Dutch
// LCD Menu Messages
// Please note these are limited to 17 characters!
# define WELCOME_MSG MACHINE_NAME " gereed."
# define MSG_SD_INSERTED "Kaart ingestoken"
# define MSG_SD_REMOVED "Kaart verwijderd"
# define MSG_MAIN "Main"
# define MSG_AUTOSTART "Autostart"
# define MSG_DISABLE_STEPPERS "Motoren uit"
# define MSG_AUTO_HOME "Auto home"
# define MSG_SET_ORIGIN "Nulpunt instellen"
# define MSG_PREHEAT_PLA "PLA voorverwarmen"
2014-02-18 09:40:10 +01:00
# define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf"
2014-02-17 17:00:50 +01:00
# define MSG_PREHEAT_ABS "ABS voorverwarmen"
2014-02-18 09:40:10 +01:00
# define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf"
2014-02-17 17:00:50 +01:00
# define MSG_COOLDOWN "Afkoelen"
# define MSG_SWITCH_PS_ON "Stroom aan"
# define MSG_SWITCH_PS_OFF "Stroom uit"
# define MSG_EXTRUDE "Extrude"
# define MSG_RETRACT "Retract"
# define MSG_MOVE_AXIS "As verplaatsen"
# define MSG_MOVE_X "Verplaats X"
# define MSG_MOVE_Y "Verplaats Y"
# define MSG_MOVE_Z "Verplaats Z"
# define MSG_MOVE_E "Extruder"
# define MSG_MOVE_01MM "Verplaats 0.1mm"
# define MSG_MOVE_1MM "Verplaats 1mm"
# define MSG_MOVE_10MM "Verplaats 10mm"
# define MSG_SPEED "Snelheid"
# define MSG_NOZZLE "Nozzle"
# define MSG_NOZZLE1 "Nozzle2"
# define MSG_NOZZLE2 "Nozzle3"
# define MSG_BED "Bed"
# define MSG_FAN_SPEED "Fan snelheid"
# define MSG_FLOW "Flow"
# define MSG_CONTROL "Control"
# define MSG_MIN " \002 Min"
# define MSG_MAX " \002 Max"
# define MSG_FACTOR " \002 Fact"
# define MSG_AUTOTEMP "Autotemp"
# define MSG_ON "Aan "
# define MSG_OFF "Uit"
# define MSG_PID_P "PID-P"
# define MSG_PID_I "PID-I"
# define MSG_PID_D "PID-D"
# define MSG_PID_C "PID-C"
# define MSG_ACC "Versn"
# define MSG_VXY_JERK "Vxy-jerk"
# define MSG_VZ_JERK "Vz-jerk"
# define MSG_VE_JERK "Ve-jerk"
# define MSG_VMAX "Vmax "
# define MSG_X "x"
# define MSG_Y "y"
# define MSG_Z "z"
# define MSG_E "e"
# define MSG_VMIN "Vmin"
# define MSG_VTRAV_MIN "VTrav min"
# define MSG_AMAX "Amax "
# define MSG_A_RETRACT "A-retract"
# define MSG_XSTEPS "Xsteps / mm"
# define MSG_YSTEPS "Ysteps / mm"
# define MSG_ZSTEPS "Zsteps / mm"
# define MSG_ESTEPS "Esteps / mm"
2014-02-18 09:40:10 +01:00
# define MSG_RECTRACT "Terugtrekken"
2014-02-17 17:00:50 +01:00
# define MSG_TEMPERATURE "Temperatuur"
# define MSG_MOTION "Beweging"
# define MSG_CONTRAST "LCD contrast"
# define MSG_STORE_EPROM "Geheugen opslaan"
# define MSG_LOAD_EPROM "Geheugen laden"
# define MSG_RESTORE_FAILSAFE "Noodstop reset"
# define MSG_REFRESH "Ververs"
# define MSG_WATCH "Info scherm"
# define MSG_PREPARE "Voorbereiden"
# define MSG_TUNE "Afstellen"
# define MSG_PAUSE_PRINT "Print pauzeren"
# define MSG_RESUME_PRINT "Print hervatten"
# define MSG_STOP_PRINT "Print stoppen"
# define MSG_CARD_MENU "Print van SD"
# define MSG_NO_CARD "Geen SD kaart"
# define MSG_DWELL "Slapen..."
# define MSG_USERWAIT "Wachten..."
# define MSG_RESUMING "Print hervatten"
# define MSG_NO_MOVE "Geen beweging."
# define MSG_KILLED "AFGEBROKEN. "
# define MSG_STOPPED "GESTOPT. "
# define MSG_CONTROL_RETRACT "Retract mm"
# define MSG_CONTROL_RETRACTF "Retract F"
# define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
# define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
# define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
# define MSG_AUTORETRACT "AutoRetr."
# define MSG_FILAMENTCHANGE "Verv. Filament"
2014-02-20 15:28:29 +01:00
# define MSG_INIT_SDCARD "Init. SD kaart"
2014-02-17 17:00:50 +01:00
# define MSG_CNG_SDCARD "Verv. SD card"
2014-02-20 15:28:29 +01:00
# define MSG_ZPROBE_OUT "Z probe uit. bed"
# define MSG_POSITION_UNKNOWN "Home X / Y voor Z"
# define MSG_ZPROBE_ZOFFSET "Z Offset"
2014-02-17 17:00:50 +01:00
# define MSG_BABYSTEP_X "Babystap X"
# define MSG_BABYSTEP_Y "Babystap Y"
# define MSG_BABYSTEP_Z "Babystap Z"
# define MSG_ENDSTOP_ABORT "Endstop afbr."
// Serial Console Messages
# define MSG_Enqueing "enqueing \""
# define MSG_POWERUP "Opstarten"
# define MSG_EXTERNAL_RESET " Externe Reset"
# define MSG_BROWNOUT_RESET " Lage voedingsspanning Reset"
# define MSG_WATCHDOG_RESET " Watchdog Reset"
# define MSG_SOFTWARE_RESET " Software Reset"
# define MSG_AUTHOR " | Auteur: "
# define MSG_CONFIGURATION_VER " Laatst bijgewerkt: "
# define MSG_FREE_MEMORY " Vrij Geheugen: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Bestand opslaan voltooid."
# define MSG_ERR_LINE_NO "Regelnummer is niet het laatste regelnummer+1, Laatste regel: "
# define MSG_ERR_CHECKSUM_MISMATCH "Checksum fout, Laatste regel: "
# define MSG_ERR_NO_CHECKSUM "Regel zonder checksum, Laatste regel: "
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Geen regelnummer met checksum, Laatste regel: "
# define MSG_FILE_PRINTED "Bestand afdrukken klaar"
# define MSG_BEGIN_FILE_LIST "Begin bestandslijst"
# define MSG_END_FILE_LIST "Einde bestandslijst"
# define MSG_M104_INVALID_EXTRUDER "M104 Ongeldige extruder "
# define MSG_M105_INVALID_EXTRUDER "M105 Ongeldige extruder "
# define MSG_M200_INVALID_EXTRUDER "M200 Ongeldige extruder "
# define MSG_M218_INVALID_EXTRUDER "M218 Ongeldige extruder "
# define MSG_ERR_NO_THERMISTORS "Geen thermistors - geen temperatuur"
# define MSG_M109_INVALID_EXTRUDER "M109 Ongeldige extruder "
# define MSG_HEATING "Opwarmen..."
# define MSG_HEATING_COMPLETE "Opwarmen klaar."
# define MSG_BED_HEATING "Bed opwarmen."
# define MSG_BED_DONE "Bed klaar."
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup voor gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
# define MSG_COUNT_X " Aantal X: "
# define MSG_ERR_KILLED "Printer stopgezet. kill() aangeroepen!"
# define MSG_ERR_STOPPED "Printer gestopt vanwege fouten. Los de fout op en gebruik M999 om opnieuw te starten. (Temperatuur is gereset, stel deze opnieuw in na herstart)"
# define MSG_RESEND "Opnieuw sturen: "
# define MSG_UNKNOWN_COMMAND "Onbekend commando: \""
# define MSG_ACTIVE_EXTRUDER "Actieve Extruder: "
# define MSG_INVALID_EXTRUDER "Ongeldige extruder"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Eindstop statusrapportage:"
# define MSG_ENDSTOP_HIT "GERAAKT"
# define MSG_ENDSTOP_OPEN "open"
# define MSG_HOTEND_OFFSET "Hotend afwijking:"
# define MSG_SD_CANT_OPEN_SUBDIR "Kan subdirectory niet openen"
# define MSG_SD_INIT_FAIL "SD initialiseren mislukt"
# define MSG_SD_VOL_INIT_FAIL "volume.init mislukt"
# define MSG_SD_OPENROOT_FAIL "openRoot mislukt"
# define MSG_SD_CARD_OK "SD kaart ok"
# define MSG_SD_WORKDIR_FAIL "workDir openen mislukt"
# define MSG_SD_OPEN_FILE_FAIL "Openen mislukt, bestand: "
# define MSG_SD_FILE_OPENED "Bestand geopend: "
# define MSG_SD_SIZE " Grootte: "
# define MSG_SD_FILE_SELECTED "Bestanden geselecteerd:"
# define MSG_SD_WRITE_TO_FILE "Schrijven naar bestand: "
# define MSG_SD_PRINTING_BYTE "SD printen byte: "
# define MSG_SD_NOT_PRINTING "Niet SD printen"
# define MSG_SD_ERR_WRITE_TO_FILE "Fout tijdens het schrijven naar bestand:"
# define MSG_SD_CANT_ENTER_SUBDIR "Kan subdirectory niet in: "
# define MSG_STEPPER_TOO_HIGH "stapsnelheid te hoog:"
# define MSG_ENDSTOPS_HIT "endstops geraakt: "
# define MSG_ERR_COLD_EXTRUDE_STOP " Koude extrusie voorkomen"
# define MSG_ERR_LONG_EXTRUDE_STOP " te lange extrusie voorkomen"
# define MSG_BABYSTEPPING_X "Babystepping X"
# define MSG_BABYSTEPPING_Y "Babystepping Y"
# define MSG_BABYSTEPPING_Z "Babystepping Z"
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fout in menustructuur"
# endif
2013-07-23 21:49:37 +02:00
# endif // ifndef LANGUAGE_H
