Firmware2/buildroot/share/PlatformIO/variants/MEEB_3DP/board/board.h

126 lines
4.3 KiB
C
Raw Normal View History

2020-06-02 01:25:13 +02:00
/******************************************************************************
* The MIT License
*
* Copyright (c) 2011 LeafLabs, LLC.
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*****************************************************************************/
/**
* @file maple_RET6.h
* @author Marti Bolivar <mbolivar@leaflabs.com>
* @brief Private include file for Maple RET6 Edition in boards.h
*
* See maple.h for more information on these definitions.
*/
#ifndef _BOARDS_GENERIC_STM32F103R_H_
#define _BOARDS_GENERIC_STM32F103R_H_
/* A few of these values will seem strange given that it's a
* high-density board. */
#define CYCLES_PER_MICROSECOND 72
#define SYSTICK_RELOAD_VAL (F_CPU/1000) - 1 /* takes a cycle to reload */
// USARTS
#define BOARD_NR_USARTS 5
#define BOARD_USART1_TX_PIN PA9
#define BOARD_USART1_RX_PIN PA10
#define BOARD_USART2_TX_PIN PA2
#define BOARD_USART2_RX_PIN PA3
#define BOARD_USART3_TX_PIN PB10
#define BOARD_USART3_RX_PIN PB11
#define BOARD_USART4_TX_PIN PC10
#define BOARD_USART4_RX_PIN PC11
#define BOARD_USART5_TX_PIN PC12
#define BOARD_USART5_RX_PIN PD2
/* Note:
*
* SPI3 is unusable due to pin 43 (PB4) and NRST tie-together :(, but
* leave the definitions so as not to clutter things up. This is only
* OK since RET6 Ed. is specifically advertised as a beta board. */
#define BOARD_NR_SPI 3
#define BOARD_SPI1_NSS_PIN PA4
#define BOARD_SPI1_SCK_PIN PA5
#define BOARD_SPI1_MISO_PIN PA6
#define BOARD_SPI1_MOSI_PIN PA7
#define BOARD_SPI2_NSS_PIN PB12
#define BOARD_SPI2_SCK_PIN PB13
#define BOARD_SPI2_MISO_PIN PB14
#define BOARD_SPI2_MOSI_PIN PB15
#define BOARD_SPI3_NSS_PIN PA15
#define BOARD_SPI3_SCK_PIN PB3
#define BOARD_SPI3_MISO_PIN PB4
#define BOARD_SPI3_MOSI_PIN PB5
/* GPIO A to E = 5 * 16 - BOOT1 not used = 79*/
#define BOARD_NR_GPIO_PINS 51
/* Note: NOT 19. The missing one is D38 a.k.a. BOARD_BUTTON_PIN, which
* isn't broken out to a header and is thus unusable for PWM. */
#define BOARD_NR_PWM_PINS 19
#define BOARD_NR_ADC_PINS 16
#define BOARD_NR_USED_PINS 7
#define BOARD_JTMS_SWDIO_PIN 39
#define BOARD_JTCK_SWCLK_PIN 40
#define BOARD_JTDI_PIN 41
#define BOARD_JTDO_PIN 42
#define BOARD_NJTRST_PIN 43
/* USB configuration. BOARD_USB_DISC_DEV is the GPIO port containing
* the USB_DISC pin, and BOARD_USB_DISC_BIT is that pin's bit. */
#define BOARD_USB_DISC_DEV GPIOC
#define BOARD_USB_DISC_BIT 12
/*
* SDIO Pins
*/
#define BOARD_SDIO_D0 PC8
#define BOARD_SDIO_D1 PC9
#define BOARD_SDIO_D2 PC10
#define BOARD_SDIO_D3 PC11
#define BOARD_SDIO_CLK PC12
#define BOARD_SDIO_CMD PD2
/* Pin aliases: these give the GPIO port/bit for each pin as an
* enum. These are optional, but recommended. They make it easier to
* write code using low-level GPIO functionality. */
enum {
PA0,PA1,PA2,PA3,PA4,PA5,PA6,PA7,PA8,PA9,PA10,PA11,PA12,PA13,PA14,PA15,
PB0,PB1,PB2,PB3,PB4,PB5,PB6,PB7,PB8,PB9,PB10,PB11,PB12,PB13,PB14,PB15,
PC0,PC1,PC2,PC3,PC4,PC5,PC6,PC7,PC8,PC9,PC10,PC11,PC12,PC13,PC14,PC15,
PD0,PD1,PD2
};/* Note PB2 is skipped as this is Boot1 and is not going to be much use as its likely to be pulled permanently low */
#endif