Firmware2/Marlin/src/HAL/HAL_LPC1768/SoftwareSerial.h

120 lines
3.5 KiB
C
Raw Normal View History

/*
SoftwareSerial.h (formerly NewSoftSerial.h) -
Multi-instance software serial library for Arduino/Wiring
-- Interrupt-driven receive and other improvements by ladyada
(http://ladyada.net)
-- Tuning, circular buffer, derivation from class Print/Stream,
multi-instance support, porting to 8MHz processors,
various optimizations, PROGMEM delay tables, inverse logic and
direct port writing by Mikal Hart (http://www.arduiniana.org)
-- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)
-- 20MHz processor support by Garrett Mace (http://www.macetech.com)
-- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
The latest version of this library can always be found at
http://arduiniana.org.
*/
2017-09-06 13:28:32 +02:00
#ifndef SOFTWARESERIAL_H
#define SOFTWARESERIAL_H
#include "arduino.h"
2017-09-06 13:28:32 +02:00
#include <stdint.h>
//#include "serial.h"
2017-09-06 13:28:32 +02:00
#include <Stream.h>
#include <Print.h>
/******************************************************************************
* Definitions
******************************************************************************/
#define _SS_MAX_RX_BUFF 64 // RX buffer size
class SoftwareSerial : public Stream
{
private:
// per object data
pin_t _receivePin;
pin_t _transmitPin;
// uint32_t _receiveBitMask; // for rx interrupts
uint32_t _receivePort;
uint32_t _receivePortPin;
// Expressed as 4-cycle delays (must never be 0!)
uint16_t _rx_delay_centering;
uint16_t _rx_delay_intrabit;
uint16_t _rx_delay_stopbit;
uint16_t _tx_delay;
uint16_t _buffer_overflow:1;
uint16_t _inverse_logic:1;
// static data
static unsigned char _receive_buffer[_SS_MAX_RX_BUFF];
static volatile uint8_t _receive_buffer_tail;
static volatile uint8_t _receive_buffer_head;
static SoftwareSerial *active_object;
// private methods
2017-09-30 23:06:43 +02:00
void recv();
uint32_t rx_pin_read();
2017-09-30 23:06:43 +02:00
void tx_pin_write(uint8_t pin_state);
void setTX(pin_t transmitPin);
void setRX(pin_t receivePin);
2017-09-30 23:06:43 +02:00
void setRxIntMsk(bool enable);
// private static method for timing
static inline void tunedDelay(uint32_t delay);
public:
// public methods
SoftwareSerial(pin_t receivePin, pin_t transmitPin, bool inverse_logic = false);
~SoftwareSerial();
void begin(long speed);
bool listen();
void end();
bool isListening() { return this == active_object; }
bool stopListening();
bool overflow() { bool ret = _buffer_overflow; if (ret) _buffer_overflow = false; return ret; }
int peek();
virtual size_t write(uint8_t byte);
virtual int read();
virtual int available();
virtual void flush();
operator bool() { return true; }
using Print::write;
//using HalSerial::write;
// public only for easy access by interrupt handlers
static inline void handle_interrupt() __attribute__((__always_inline__));
};
// Arduino 0012 workaround
#undef int
#undef char
#undef long
#undef byte
#undef float
#undef abs
#undef round
2017-09-06 13:28:32 +02:00
#endif // SOFTWARESERIAL_H