Firmware2/Marlin/src/pins/stm32/pins_LERDGE_X.h

175 lines
3.8 KiB
C
Raw Normal View History

2019-09-15 22:23:04 +02:00
/**
* Marlin 3D Printer Firmware
2019-09-16 23:50:57 +02:00
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
2019-09-15 22:23:04 +02:00
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#if !defined(STM32F4) && !defined(STM32F4xx)
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
#elif HOTENDS > 2 || E_STEPPERS > 2
#error "LERDGE X supports up to 2 hotends / E-steppers."
#endif
#define BOARD_INFO_NAME "Lerdge X"
#define DEFAULT_MACHINE_NAME "LERDGE"
//#define I2C_EEPROM
//
// Servos
//
//#define SERVO0_PIN PD12
//#define SERVO1_PIN -1
//
// Limit Switches
//
#define X_STOP_PIN PB12
#define Y_STOP_PIN PB13
#define Z_STOP_PIN PB14
//
// Filament runout
//
#define FIL_RUNOUT_PIN PE1
//
// Z Probe (when not Z_MIN_PIN)
//
//#ifndef Z_MIN_PROBE_PIN
// #define Z_MIN_PROBE_PIN PB15
//#endif
//
// Steppers
//
#define X_STEP_PIN PB10
#define X_DIR_PIN PB2
#define X_ENABLE_PIN PB11
//#ifndef X_CS_PIN
// #define X_CS_PIN PD1
//#endif
#define Y_STEP_PIN PB0
#define Y_DIR_PIN PC5
#define Y_ENABLE_PIN PB1
//#ifndef Y_CS_PIN
// #define Y_CS_PIN PE12
//#endif
#define Z_STEP_PIN PA7
#define Z_DIR_PIN PA6
#define Z_ENABLE_PIN PC4
//#ifndef Z_CS_PIN
// #define Z_CS_PIN PD5
//#endif
#define E0_STEP_PIN PA4
#define E0_DIR_PIN PA3
#define E0_ENABLE_PIN PA5
//#ifndef E0_CS_PIN
// #define E0_CS_PIN PB4
//#endif
#define E1_STEP_PIN -1
#define E1_DIR_PIN -1
#define E1_ENABLE_PIN -1
//#ifndef E1_CS_PIN
// #define E1_CS_PIN PE5
//#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN PC0 // Analog Input
#define TEMP_1_PIN -1 // Analog Input
#define TEMP_BED_PIN PC1 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN PA1
#define HEATER_1_PIN -1
#define HEATER_BED_PIN PA2
#ifndef FAN_PIN
// #define FAN_PIN PC15
#endif
#define FAN1_PIN PC15
#define FAN2_PIN PA0
#define ORIG_E0_AUTO_FAN_PIN PC15 // Use this by NOT overriding E0_AUTO_FAN_PIN
//
// Prusa i3 MK2 Multi Material Multiplexer Support
//
//#define E_MUX0_PIN -1
//#define E_MUX1_PIN -1
//
// LED / Lighting
//
//#define CASE_LIGHT_PIN_CI -1
//#define CASE_LIGHT_PIN_DO -1
//#define NEOPIXEL_PIN -1
//
// Misc. Functions
//
#define SDSS PC11
#define LED_PIN PC7 // Alive
#define PS_ON_PIN -1
#define KILL_PIN -1
#define POWER_LOSS_PIN -1 // Power-loss / nAC_FAULT
#define SCK_PIN PC12
#define MISO_PIN PC8
#define MOSI_PIN PD2
#define SS_PIN PC11
//
// SD support
//
#define SDIO_SUPPORT
//
// LCD / Controller
//
// The LCD is initialized in FSMC mode
#define SD_DETECT_PIN -1
#define BEEPER_PIN PD12
#define BTN_EN1 PE3
#define BTN_EN2 PE4
#define BTN_ENC PE2
#define LCD_RESET_PIN PD6
#define LCD_BACKLIGHT_PIN PD3
#define FSMC_CS_PIN PD4
#define FSMC_RS_PIN PD11
#define TOUCH_CS PB6
//
// ST7920 Delays
//
2019-11-10 05:33:25 +01:00
#if HAS_GRAPHICAL_LCD
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
#define BOARD_ST7920_DELAY_3 DELAY_NS(715)
2019-09-15 22:23:04 +02:00
#endif