Firmware2/Marlin/src/gcode/calibrate/M852.cpp

109 lines
2.9 KiB
C++
Raw Normal View History

2017-12-01 23:42:23 +01:00
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(SKEW_CORRECTION_GCODE)
#include "../gcode.h"
#include "../../module/planner.h"
/**
* M852: Get or set the machine skew factors. Reports current values with no arguments.
*
* S[xy_factor] - Alias for 'I'
* I[xy_factor] - New XY skew factor
* J[xz_factor] - New XZ skew factor
* K[yz_factor] - New YZ skew factor
*/
void GcodeSuite::M852() {
2017-12-11 04:29:10 +01:00
uint8_t ijk = 0, badval = 0, setval = 0;
2017-12-01 23:42:23 +01:00
if (parser.seen('I') || parser.seen('S')) {
2017-12-11 04:29:10 +01:00
++ijk;
2017-12-01 23:42:23 +01:00
const float value = parser.value_linear_units();
2017-12-11 04:29:10 +01:00
if (WITHIN(value, SKEW_FACTOR_MIN, SKEW_FACTOR_MAX)) {
if (planner.xy_skew_factor != value) {
planner.xy_skew_factor = value;
++setval;
}
}
2017-12-01 23:42:23 +01:00
else
2017-12-11 04:29:10 +01:00
++badval;
2017-12-01 23:42:23 +01:00
}
#if ENABLED(SKEW_CORRECTION_FOR_Z)
if (parser.seen('J')) {
2017-12-11 04:29:10 +01:00
++ijk;
2017-12-01 23:42:23 +01:00
const float value = parser.value_linear_units();
2017-12-11 04:29:10 +01:00
if (WITHIN(value, SKEW_FACTOR_MIN, SKEW_FACTOR_MAX)) {
if (planner.xz_skew_factor != value) {
planner.xz_skew_factor = value;
++setval;
}
}
2017-12-01 23:42:23 +01:00
else
2017-12-11 04:29:10 +01:00
++badval;
2017-12-01 23:42:23 +01:00
}
if (parser.seen('K')) {
2017-12-11 04:29:10 +01:00
++ijk;
2017-12-01 23:42:23 +01:00
const float value = parser.value_linear_units();
2017-12-11 04:29:10 +01:00
if (WITHIN(value, SKEW_FACTOR_MIN, SKEW_FACTOR_MAX)) {
if (planner.yz_skew_factor != value) {
planner.yz_skew_factor = value;
++setval;
}
}
2017-12-01 23:42:23 +01:00
else
2017-12-11 04:29:10 +01:00
++badval;
2017-12-01 23:42:23 +01:00
}
#endif
if (badval)
SERIAL_ECHOLNPGM(MSG_SKEW_MIN " " STRINGIFY(SKEW_FACTOR_MIN) " " MSG_SKEW_MAX " " STRINGIFY(SKEW_FACTOR_MAX));
2017-12-11 04:29:10 +01:00
// When skew is changed the current position changes
if (setval) {
set_current_from_steppers_for_axis(ALL_AXES);
SYNC_PLAN_POSITION_KINEMATIC();
report_current_position();
}
2017-12-01 23:42:23 +01:00
if (!ijk) {
SERIAL_ECHO_START();
2018-01-24 02:09:40 +01:00
SERIAL_ECHOPGM(MSG_SKEW_FACTOR " XY: ");
SERIAL_ECHO_F(planner.xy_skew_factor, 6);
SERIAL_EOL();
2017-12-01 23:42:23 +01:00
#if ENABLED(SKEW_CORRECTION_FOR_Z)
SERIAL_ECHOPAIR(" XZ: ", planner.xz_skew_factor);
SERIAL_ECHOLNPAIR(" YZ: ", planner.yz_skew_factor);
#else
SERIAL_EOL();
#endif
}
}
#endif // SKEW_CORRECTION_GCODE