Firmware2/Marlin/src/lcd/menu/menu_spindle_laser.cpp

67 lines
2.1 KiB
C++
Raw Normal View History

2019-06-28 06:06:49 +02:00
/**
* Marlin 3D Printer Firmware
2020-02-03 15:00:57 +01:00
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
2019-06-28 06:06:49 +02:00
*
* Based on Sprinter and grbl.
2019-06-28 06:57:50 +02:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
2019-06-28 06:06:49 +02:00
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
//
// Spindle / Laser Menu
//
#include "../../inc/MarlinConfig.h"
2019-06-28 22:33:47 +02:00
#if HAS_LCD_MENU && HAS_CUTTER
2019-06-28 06:06:49 +02:00
#include "menu.h"
#include "../../feature/spindle_laser.h"
void menu_spindle_laser() {
const bool is_enabled = cutter.enabled() && cutter.isReady;
2020-04-28 06:52:11 +02:00
2019-06-28 06:06:49 +02:00
START_MENU();
2019-10-03 12:38:30 +02:00
BACK_ITEM(MSG_MAIN);
2020-04-28 06:52:11 +02:00
#if ENABLED(SPINDLE_LASER_PWM)
// Change the cutter's "current power" value without turning the cutter on or off
// Power is displayed and set in units and range according to CUTTER_POWER_UNIT
EDIT_ITEM_FAST(CUTTER_MENU_POWER_TYPE, MSG_CUTTER(POWER), &cutter.menuPower,
cutter.mpower_min(), cutter.mpower_max(), cutter.update_from_mpower);
#endif
if (is_enabled)
2019-10-03 12:38:30 +02:00
ACTION_ITEM(MSG_CUTTER(OFF), cutter.disable);
2019-06-28 06:06:49 +02:00
else {
2019-10-03 12:38:30 +02:00
ACTION_ITEM(MSG_CUTTER(ON), cutter.enable_forward);
2019-06-28 06:06:49 +02:00
#if ENABLED(SPINDLE_CHANGE_DIR)
2019-10-03 12:38:30 +02:00
ACTION_ITEM(MSG_SPINDLE_REVERSE, cutter.enable_reverse);
2019-06-28 06:06:49 +02:00
#endif
}
#if ENABLED(MARLIN_DEV_MODE)
#if ENABLED(HAL_CAN_SET_PWM_FREQ) && defined(SPINDLE_LASER_FREQUENCY)
EDIT_ITEM_FAST(CUTTER_MENU_FREQUENCY_TYPE, MSG_CUTTER_FREQUENCY, &cutter.frequency, 2000, 50000, cutter.refresh_frequency);
#endif
#endif
2019-06-28 06:06:49 +02:00
END_MENU();
}
2019-06-28 22:33:47 +02:00
#endif // HAS_LCD_MENU && HAS_CUTTER