Firmware2/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h

197 lines
5.1 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
2020-02-03 15:00:57 +01:00
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
2019-06-28 06:57:50 +02:00
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
2020-07-23 05:20:14 +02:00
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
2019-07-05 05:44:12 +02:00
#pragma once
#ifndef __STM32F1__
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#endif
2019-08-21 02:08:58 +02:00
#define BOARD_INFO_NAME "FYSETC AIO II"
2019-08-23 01:17:13 +02:00
#define BOARD_WEBSITE_URL "fysetc.com"
#define DISABLE_JTAG
2020-06-28 07:12:22 +02:00
#define pins_v2_20190128 // new pins define
// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
//
// Flash EEPROM Emulation
2019-09-05 04:40:40 +02:00
//
2020-04-29 21:46:33 +02:00
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
#define FLASH_EEPROM_EMULATION
2020-06-28 07:12:22 +02:00
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
2020-04-29 21:46:33 +02:00
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
2020-04-29 21:46:33 +02:00
#endif
//
// Limit Switches
//
2020-03-22 03:13:19 +01:00
#define X_STOP_PIN PA1
#define Y_STOP_PIN PA0
#define Z_STOP_PIN PB14
//
// Filament runout
//
#ifdef pins_v2_20190128
2020-03-22 03:13:19 +01:00
#define FIL_RUNOUT_PIN PB15
#else
2020-03-22 03:13:19 +01:00
#define FIL_RUNOUT_PIN PB5
#endif
//
// Steppers
//
2020-03-22 03:13:19 +01:00
#define X_STEP_PIN PB8
#define X_DIR_PIN PB9
#define X_ENABLE_PIN PA8
2020-03-22 03:13:19 +01:00
#define Y_STEP_PIN PB2
#ifdef pins_v2_20190128
2020-03-22 03:13:19 +01:00
#define Y_DIR_PIN PB3
#else
2020-03-22 03:13:19 +01:00
#define Y_DIR_PIN PB0
#endif
2020-03-22 03:13:19 +01:00
#define Y_ENABLE_PIN PB1
2020-03-22 03:13:19 +01:00
#define Z_STEP_PIN PC0
#define Z_DIR_PIN PC1
#define Z_ENABLE_PIN PC2
2020-03-22 03:13:19 +01:00
#define E0_STEP_PIN PC15
#define E0_DIR_PIN PC14
#define E0_ENABLE_PIN PC13
#if HAS_TMC_UART
/**
* TMC2208/TMC2209 stepper drivers
*/
//
// Hardware serial with switch
//
#define X_HARDWARE_SERIAL Serial1
#define Y_HARDWARE_SERIAL Serial1
#define Z_HARDWARE_SERIAL Serial1
#define E0_HARDWARE_SERIAL Serial1
// The 4xTMC2209 module doesn't have a serial multiplexer and
// needs to set *_SLAVE_ADDRESS in Configuration_adv.h for X,Y,Z,E0
#if HAS_DRIVER(TMC2208)
#define TMC_SERIAL_MULTIPLEXER
#define SERIAL_MUL_PIN1 PB13
#define SERIAL_MUL_PIN2 PB12
#endif
#endif
//
// Stepper current PWM
//
#ifndef MOTOR_CURRENT_PWM_RANGE
#define MOTOR_CURRENT_PWM_RANGE 1500 // origin:2000
#endif
#define DEFAULT_PWM_MOTOR_CURRENT { 500, 500, 400 } // origin: {1300,1300,1250}
//
// Heaters / Fans
//
2020-03-22 03:13:19 +01:00
#define HEATER_0_PIN PC7
#define HEATER_BED_PIN PC6
#ifndef FAN_PIN
2020-03-22 03:13:19 +01:00
#define FAN_PIN PC8
#endif
//
// Temperature Sensors
//
2020-03-22 03:13:19 +01:00
#define TEMP_BED_PIN PC5 // Analog Input
#define TEMP_0_PIN PC4 // Analog Input
//
// Misc. Functions
//
2020-03-22 03:13:19 +01:00
#define SDSS PA4
//
// LCD Pins
//
#if HAS_SPI_LCD
2020-03-22 03:13:19 +01:00
#define BEEPER_PIN PC9
#if HAS_GRAPHICAL_LCD
2020-03-22 03:13:19 +01:00
#define DOGLCD_A0 PA15
#ifdef pins_v2_20190128
2020-03-22 03:13:19 +01:00
#define DOGLCD_CS PB5
#else
2020-03-22 03:13:19 +01:00
#define DOGLCD_CS PB7
#endif
//#define LCD_CONTRAST_INIT 190
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#endif
// not connected to a pin
2020-03-22 03:13:19 +01:00
#define SD_DETECT_PIN PC3
#if ENABLED(NEWPANEL)
// The encoder and click button
2020-03-22 03:13:19 +01:00
#define BTN_EN1 PC10
#define BTN_EN2 PC11
#define BTN_ENC PC12
#endif
#ifdef pins_v2_20190128
2020-03-22 03:13:19 +01:00
#define LCD_RESET_PIN PB4
#ifndef RGB_LED_R_PIN
2020-03-22 03:13:19 +01:00
#define RGB_LED_R_PIN PB0
#endif
#ifndef RGB_LED_G_PIN
2020-03-22 03:13:19 +01:00
#define RGB_LED_G_PIN PB6
#endif
#ifndef RGB_LED_B_PIN
2020-03-22 03:13:19 +01:00
#define RGB_LED_B_PIN PB7
#endif
#else
2020-03-22 03:13:19 +01:00
#define LCD_RESET_PIN PB6
#ifndef RGB_LED_R_PIN
2020-03-22 03:13:19 +01:00
#define RGB_LED_R_PIN PB3
#endif
#ifndef RGB_LED_G_PIN
2020-03-22 03:13:19 +01:00
#define RGB_LED_G_PIN PB4
#endif
#ifndef RGB_LED_B_PIN
2020-03-22 03:13:19 +01:00
#define RGB_LED_B_PIN PB5
#endif
#endif
#endif